Equipment

Miura Launches ICL-601 Driving Irons in North America

Published

7 years ago

Sep 26, 2017

Looking for a long-iron replacement that’s easier to hit than the MG Collection CB-2008, CB-1008, and MB-5005 irons? Meet Miura’s new MG ICL-601 driving iron, which will be available later this fall in North America.

The ICL-601 has a multi-material, hollow-cavity construction that helps it launch shots higher and faster than the company’s MB and CB models. The bodies of the driving irons are made of SUS304 stainless steel, and they’re welded to a 455 carpenter steel faces — the same material that’s used to craft the hot faces of Miura’s Neo Genesis PP-9005 irons.

“The inner cavity design is not new for Miura,” says Hoyt McGarity, President of Miura Golf. “It was first introduced with the hugely popular IC-2003. Modern technological advances have allowed us to improve on the original design. This is accomplished by integrating a 455 Carpenter Steel face (as found in our PP-9005 G) and the use of the variable weighting system found in the Hayate woods.”

The ICL-601s also include a weight-port in the sole of the club head that allows club fitters to fine-tune swing weight for different lengths, and to help golfers blend the driving irons with their standard iron sets. The driving irons have a satin chrome finish, along with a thick top line that hides the wider sole from a golfer’s view at address.

“The ICL gives Miura traditionalists the opportunity to add technology to their game, while maintaining the quality and feel of a Miura forged club,” says Jason Rutkoski, Miura Golf vice president. “The ICL is a remarkable new product that will benefit golfers from all demographics, by seamlessly fitting their existing set or adding a club to fit that one shot/hole per round.”

Golfers can purchase the ICL-601 driving irons in three different lofts: 18 (2-iron), 20 (3-iron), and 23 degrees (4-iron). They will be available through Miura’s network of custom fitters for $369 each.

Your Reaction?

LIKE37
LEGIT11
WOW3
LOL1
IDHT1
FLOP5
OB2
SHANK40

Related Topics:irons Miura

Up Next

Spotted: Callaway Mack Daddy 4 prototype wedges, X Forged driving iron

Don't Miss

In-Depth Reviews of TaylorMade’s P790 irons from Six GolfWRX Members

GolfWRX Staff

We share your golf passion. You can follow GolfWRX on Twitter @GolfWRX, Facebook and Instagram.

18 Comments

uglande

Nov 20, 2018 at 11:11 pm

Looks atrocious. Anyone needing that much offset should go straight to the fairway wood aisle. And what’s with the ridiculous marketing message on the club head? Miura puts so much care into the materials they use, and they are known for their relatively simple designs. Why wreck it with all of this cluttering text? It makes the club look cheap and homemade.

Reply Report comment
Miuralovechild

Oct 30, 2017 at 9:25 pm

I’ll be needing to try this.

Reply Report comment
Sloop

Oct 7, 2017 at 7:27 am

I tried this bad boy out and it felt how I hoped the TMB would. It’s going to eat at me until I get one. One thing I am going to look at is if it can be bent. I’d like to get a 20 and bend it a degree or two weak and lose a little offset.

Reply Report comment
Dat

Sep 27, 2017 at 9:32 am

“The structure of inner cavity” um, that doesn’t sound right.

Reply Report comment
toyzrx

Sep 26, 2017 at 11:47 pm

Miura isn’t the same any longer. Logos are getting bigger on heads though. I liked their stuff when they used to do OEM for big companies.

Reply Report comment
Daniel

Sep 26, 2017 at 6:51 pm

Its not even forged?

Reply Report comment
- Tom1
  
  Sep 26, 2017 at 8:30 pm
  
  http://www.vcstar.com/story/sports/2017/09/26/golf-gear-miura-golfs-icl-601-driving-iron/705486001/ … there ya go skippy
  
  Reply Report comment
  - Daniel
    
    Sep 27, 2017 at 9:23 am
    
    It doesn’t say its forged. It compares it to other forged clubs.
    
    Reply Report comment
    - 2putttom
      
      Sep 27, 2017 at 11:29 am
      
      well shoot you guys are blowin my defense outta the H2O
      
      Reply Report comment
The dude

Sep 26, 2017 at 5:00 pm

Eeeww

Reply Report comment
2putttom

Sep 26, 2017 at 3:03 pm

awww the mizzy boyz have showed up

Reply Report comment
Vanilla Gorilla

Sep 26, 2017 at 12:54 pm

I’d have expected prettier from Miura, sticking with MP-H5’s for the upper end of my bag.

Reply Report comment
- Vanilla Gorilla
  
  Sep 28, 2017 at 5:58 pm
  
  Appears to have some things in common with:
  
  [img}http://wpmediars.golfwrx.com/wp-content/uploads/2017/09/104ccac8c0929ecb6779127f4fccc694.jpg[/img]
  
  Reply Report comment
Golf Engineer

Sep 26, 2017 at 12:41 pm

“The bodies of the driving irons are made of SUS304 stainless steel, and they’re welded to a 455 carpenter steel faces — the same material that’s used to craft the hot faces of Miura’s Neo Genesis PP-9005 irons.”
Okay, the body is cast stainless steel and the face is also steel. No forged components.
Now here from the quoted article for the PP-9005 iron set we have:
“The Genesis PP-9005 irons ….. (are) comprised of two pieces; the back is forged out of S20C and the faces are 455 carpenter steel.”
So the backs and hosel are forged while the faceplate is carpenter steel not forged to the best of my knowledge.
Muira is up front with the metallurgy of their iron club heads in contrast to TM P790 co-forged heads where the faceplate is forged and body is cast steel but labelled as fully forged.

Reply Report comment
L

Sep 26, 2017 at 12:38 pm

I bet you it feels better than the PXG

Reply Report comment
Ken

Sep 26, 2017 at 12:36 pm

Hideous. The new Mizuno driving iron is 100x better looking

Reply Report comment
- MrWolf
  
  Sep 27, 2017 at 2:55 pm
  
  This. It really is hideous. The early signs following Miura’s takeover are not good.
  
  Reply Report comment
Swingman/Jerry

Sep 26, 2017 at 12:22 pm

That is ugly for a Miura – too much offset, too thick topline, the sole is fine for a hybrid type driving iron.

Reply Report comment

Cancel reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Equipment

A shocking Backstryke putter appearance + 7 interesting gear photos from the Zurich Classic

Published

13 hours ago

Apr 25, 2024

Andrew Tursky

Welcome to New Orleans, where TPC Louisiana plays host to the 2024 Zurich Classic. In between breakfast beignets and nightly Creole feasts, PGA Tour players are also competing in the unique two-man format at the Zurich this week.

Although the vibes in Nawlins are a bit lighter-fare than the recent back-to-back competitions the Masters and the RBC Heritage signature event), the gear news was no less serious this week.

We spotted some recent changes from Rory McIlroy, a very rare Odyssey Backstryke putter, dove into the bag of legendary New Orleans Saints quarterback Drew Brees, and spotted Patrick Cantlay continuing to test new equipment.

Get your beads out and crack your crawfish, because it’s time for an equipment rundown from The Big Easy (meaning New Orleans, of course, not Ernie Els).

See all of our photos from the Zurich Classic here

Rory’s on-and-off lob wedge

Since the end of 2023, Rory McIlroy has had an on-again, off-again relationship with a Titleist Vokey K-Grind lob wedge. In his last start, it was on, and the wedge is back in the bag again this week. We got a great look at the complicated grind that McIlroy uses.

View this post on Instagram

A post shared by GolfWRX (@golfwrx)

A full look into McIlroy’s bag above also shows that he switched out of the TaylorMade BRNR Mini Copper that he used at the RBC Heritage, and he’s back into the Qi10 core 3-wood. As we discussed last week, McIlroy will likely keep the BRNR around as a course-specific club, trading it in and out for the 3-wood.

See Rory McIlroy’s full 2024 WITB from the Zurich here

Turning Back the clock

Unless Tommy Gainey is in the field, it’s unlikely you’ll ever see Odyssey’s Backstryke technology make an appearance on the PGA Tour.

But then, when you least expect it, Russ Cochran shows up.

For more than a decade – since the 2013 Sony Open in Hawai’i – Cochran has been stuck on 599 PGA Tour starts. This week will be his 600th.

Cochran is in the field at the Zurich this week playing alongside Eric Cole, whose regular caddie is Reed Cochran, Russ’s son.

The Backstryke putter was first released back in 2010, and its unique design helps shift the axis point of the putter closer to the CG of the head. And, the putter is getting a nod this week at the Zurich Classic, thanks to Cochran’s 600th career PGA Tour start.

The putter is certainly awesome, but don’t forget to check out Cochran’s full WITB from this week.

Drew Brees with a Super Bowl winning Scotty Cameron putter

Drew Brees, a legendary retired quarterback for the hometown New Orleans Saints, made an appearance at the Zurich’s Wednesday Pro-Am, playing alongside Zach Johnson, Ryan Palmer, and current Saints QB Derek Carr.

Brees’ bag included a TaylorMade Stealth2 Plus driver, a BRNR Mini 13.5-degree, a Stealth 5-wood, a mixed set of P-790 and P-760 irons, Milled Grind Hi-Toe wedges, and a custom Scotty Cameron “New Orleans Saints” putter, which Scotty made for Brees following his Super Bowl MVP-winning performance in 2010.

View this post on Instagram

A post shared by GolfWRX (@golfwrx)

It should also be noted that Brees has his Venmo QR code as a bag tag.

If you’re gambling with Brees on the course, just know that not having cash won’t work as an excuse.

Brilliant.

See Drew Brees’ full WITB from the Zurich here

Stricker’s unrecognizable putter

Steve Stricker has made numerous upgrades to his bag recently, including a new TSR3 driver and T100 irons, but his longtime Odyssey White Hot No. 2 putter is still going strong. It’s the most recognizable unrecognizable putter ever.

Here’s a better look at Stricker’s flatstick, which he started using back in 2007.

View this post on Instagram

A post shared by GolfWRX (@golfwrx)

Patrick Cantlay has opened the equipment-switching floodgates

Over on the PGA Tour’s Equipment Report this week, we covered Cantlay’s recent switch into Ping Blueprint S irons, and a Titleist TSR2 driver.

Cantlay hadn’t switched irons for about seven years, so the iron switch he made at The 2024 Masters came as a shock to the norm. He simply isn’t one to change gear very often, so anytime Cantlay makes a switch, it’s news.

It seems the floodgates of equipment testing have opened up a bit for Cantlay, who was also spotted testing a custom Scotty Cameron blade putter on Tuesday this week. By Wednesday, Cantlay was back practicing with his familiar Scotty Cameron T5 Proto mallet, but it’s certainly something to keep an eye on going forward.

Daniel Berger’s custom Jailbird site lines

Berger, who’s currently using Odyssey’s Ai-One Mini Jailbird mallet putter, has a unique 3-dot, 2-line alignment on the crown of his navy-white-navy-white mallet putter. Looking down at the putter, it’s easy to see why this alignment system would help; it just seems impossible to set up to the ball off-center, or misaligned to the target.

Also, for anyone worried, you can rest easy. Yes, he’s still playing the 2013 TaylorMade TP MC irons, which we highlighted in our recent “Modern Classics: Old vs. New” video testing series.

FitzMagic teams back up

Brothers Matthew and Alex Fitzpatrick are teaming up once again at the Zurich this year, and Bettinardi Golf hooked them up with some festive “FitzMagic” headcovers to match this week.

See what else is in Alex Fitzpatrick’s WITB here

And, with that, we say goodbye to the Zurich Classic in New Orleans. Don’t forget to check out all of our photos from this week, including 30 unique photo galleries full of equipment photos.

We’ll see you next week in Texas for the 2024 CJ Cup Byron Nelson!

Your Reaction?