Connect with us

Equipment

Miura Launches ICL-601 Driving Irons in North America

Published

on

Looking for a long-iron replacement that’s easier to hit than the MG Collection CB-2008, CB-1008, and MB-5005 irons? Meet Miura’s new MG ICL-601 driving iron, which will be available later this fall in North America.

Miura_ICL_601_Hero

The ICL-601 has a multi-material, hollow-cavity construction that helps it launch shots higher and faster than the company’s MB and CB models. The bodies of the driving irons are made of SUS304 stainless steel, and they’re welded to a 455 carpenter steel faces — the same material that’s used to craft the hot faces of Miura’s Neo Genesis PP-9005 irons.

“The inner cavity design is not new for Miura,” says Hoyt McGarity, President of Miura Golf. “It was first introduced with the hugely popular IC-2003. Modern technological advances have allowed us to improve on the original design. This is accomplished by integrating a 455 Carpenter Steel face (as found in our PP-9005 G) and the use of the variable weighting system found in the Hayate woods.”

Miura_ICL_601_Address

The ICL-601s also include a weight-port in the sole of the club head that allows club fitters to fine-tune swing weight for different lengths, and to help golfers blend the driving irons with their standard iron sets. The driving irons have a satin chrome finish, along with a thick top line that hides the wider sole from a golfer’s view at address.

“The ICL gives Miura traditionalists the opportunity to add technology to their game, while maintaining the quality and feel of a Miura forged club,” says Jason Rutkoski, Miura Golf vice president. “The ICL is a remarkable new product that will benefit golfers from all demographics, by seamlessly fitting their existing set or adding a club to fit that one shot/hole per round.”

Miura_ICL_601_Sole

Golfers can purchase the ICL-601 driving irons in three different lofts: 18 (2-iron), 20 (3-iron), and 23 degrees (4-iron). They will be available through Miura’s network of custom fitters for $369 each.

Your Reaction?
  • 35
  • LEGIT10
  • WOW3
  • LOL1
  • IDHT1
  • FLOP5
  • OB2
  • SHANK37

We share your golf passion. You can follow GolfWRX on Twitter @GolfWRX, Facebook and Instagram.

18 Comments

18 Comments

  1. uglande

    Nov 20, 2018 at 11:11 pm

    Looks atrocious. Anyone needing that much offset should go straight to the fairway wood aisle. And what’s with the ridiculous marketing message on the club head? Miura puts so much care into the materials they use, and they are known for their relatively simple designs. Why wreck it with all of this cluttering text? It makes the club look cheap and homemade.

  2. Miuralovechild

    Oct 30, 2017 at 9:25 pm

    I’ll be needing to try this.

  3. Sloop

    Oct 7, 2017 at 7:27 am

    I tried this bad boy out and it felt how I hoped the TMB would. It’s going to eat at me until I get one. One thing I am going to look at is if it can be bent. I’d like to get a 20 and bend it a degree or two weak and lose a little offset.

  4. Dat

    Sep 27, 2017 at 9:32 am

    “The structure of inner cavity” um, that doesn’t sound right.

  5. toyzrx

    Sep 26, 2017 at 11:47 pm

    Miura isn’t the same any longer. Logos are getting bigger on heads though. I liked their stuff when they used to do OEM for big companies.

  6. Daniel

    Sep 26, 2017 at 6:51 pm

    Its not even forged?

  7. The dude

    Sep 26, 2017 at 5:00 pm

    Eeeww

  8. 2putttom

    Sep 26, 2017 at 3:03 pm

    awww the mizzy boyz have showed up

  9. Vanilla Gorilla

    Sep 26, 2017 at 12:54 pm

    I’d have expected prettier from Miura, sticking with MP-H5’s for the upper end of my bag.

    • Vanilla Gorilla

      Sep 28, 2017 at 5:58 pm

      Appears to have some things in common with:

      [img}http://wpmediars.golfwrx.com/wp-content/uploads/2017/09/104ccac8c0929ecb6779127f4fccc694.jpg[/img]

  10. Golf Engineer

    Sep 26, 2017 at 12:41 pm

    “The bodies of the driving irons are made of SUS304 stainless steel, and they’re welded to a 455 carpenter steel faces — the same material that’s used to craft the hot faces of Miura’s Neo Genesis PP-9005 irons.”
    Okay, the body is cast stainless steel and the face is also steel. No forged components.
    Now here from the quoted article for the PP-9005 iron set we have:
    “The Genesis PP-9005 irons ….. (are) comprised of two pieces; the back is forged out of S20C and the faces are 455 carpenter steel.”
    So the backs and hosel are forged while the faceplate is carpenter steel not forged to the best of my knowledge.
    Muira is up front with the metallurgy of their iron club heads in contrast to TM P790 co-forged heads where the faceplate is forged and body is cast steel but labelled as fully forged.

  11. L

    Sep 26, 2017 at 12:38 pm

    I bet you it feels better than the PXG

  12. Ken

    Sep 26, 2017 at 12:36 pm

    Hideous. The new Mizuno driving iron is 100x better looking

    • MrWolf

      Sep 27, 2017 at 2:55 pm

      This. It really is hideous. The early signs following Miura’s takeover are not good.

  13. Swingman/Jerry

    Sep 26, 2017 at 12:22 pm

    That is ugly for a Miura – too much offset, too thick topline, the sole is fine for a hybrid type driving iron.

Leave a Reply

Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Equipment

Today from the Forums: “Best 54/56-degree wedge for a sweeper?”

Published

on

Today from the Forums we take a look at 54 and 56-degree wedges which are effective on full shots from tight lies. WRXer, 10of14, is a sweeper of the ball and has reached out to fellow members who have been giving their suggestions in our forum.

Here are a few posts from the thread, but make sure to check out the entire discussion and have your say at the link below.

  • dhen9: “M grind or ES Glide 2.0.”
  • PowerCobra98: “Callaway MD4 or MD5 with the C Grind.”
  • bsb70x7: “I am a sweeper and a low bounce player. I play Vokey 54 with 10* of bounce (as my highest bounce). You may want to go with 8* of bounce if you use your Lob wedge in the sand.”
  • NYCGolfNut: “I’m the same. M grind Vokey – 8 deg bounce, heel and toe relief. Works great.”

Entire Thread: “Best 54/56-degree wedge for a sweeper?”

Your Reaction?
  • 12
  • LEGIT1
  • WOW1
  • LOL2
  • IDHT0
  • FLOP0
  • OB1
  • SHANK3

Continue Reading

Equipment

Today from the Forums: “Searching for a 5-wood”

Published

on

Today from the Forums we take a look at 5-woods, with WRXer, RAMDAN, on the hunt for a new addition to his bag. Our members discuss the options on the market and give their take on the best models from their experiences.

Here are a few posts from the thread, but make sure to check out the entire discussion and have your say at the link below.

  • Golf64: “Cobra F8 and 9s are still out there, and the new SZ is nice too. I prefer Ping, love the look and feel and easy to get in the air!!”
  • KGilma: “I just replaced my F6 baffler with the F9. It is a definite upgrade. I still have the F6 if you’re interested.”
  • bjh1: “Recently got an Epic Flash 5 wood (regular, not sub-zero), and I am loving it! Can’t go wrong sticking with the Callaway.”
  • jah7838: “I agree with those mentioning the Baffler and the other various Cobra offerings. F8+ and F9 Tour are really good clubs. I just got the F9 Tour 3 wood, and it’s really easy to elevate with the right shaft. I still have my Baffler that I’m going to mess around with as my 5 wood. I was using it as my 4 wood for last season, and really liked it, but I found a good deal on a like-new F9 Tour 3 wood that I couldn’t pass up. The issue I’m going to have with the Baffler as my 5 wood is that I’ve had my Adams 19* XTD Super Hybrid that it’s going to have to beat out. I’ve had that club for so long now, and I’m going to have a hard time not keeping that one in the bag. It’s not a knock on the Baffler; it’s just how much I trust the XTD.”
  • AG12: “I just was given a PING G410 5W to try, and I think it’s the easiest FW to elevate and just wants to go straight. I think j the Tour 75 shaft that PING offers is a great shaft as well. Worth a look if you’re in the market.”

Entire Thread: “Searching for a 5-wood”

Your Reaction?
  • 2
  • LEGIT1
  • WOW0
  • LOL1
  • IDHT0
  • FLOP2
  • OB0
  • SHANK1

Continue Reading

Equipment

Adidas collaborates with Palace Skateboards to create golf-inspired collection

Published

on

2020 Adidas x Palace Collecetion

Adidas Golf has teamed up with cult London skate brand, Palace, to create a golf-inspired collection of sportswear, accessories and footwear.

The collection, which was showcased by some pros at the 2020 Genesis Invitational, contains reworkings of tonal polo shirts with colourful detailing, two classic T-shirts, as well as outerwear for winter golf season.

2020 Adidas x Palace collection 2020 Adidas x Palace collection

2020 Adidas x Palace collection

2020 Adidas x Palace collection

2020 Adidas x Palace collection

2020 Adidas x Palace collection

2020 Adidas x Palace collectionIncluded in the collection is a baseball cap, towel, socks and sleeve, all in black with white stripe detailing, and is completed by two pairs of unique Palace golf shoes.

2020 Adidas x Palace collection 2020 Adidas x Palace collection

2020 Adidas x Palace collection

2020 Adidas x Palace collection

2020 Adidas x Palace collectionIntending to re-imagine classic sportswear apparel and footwear for a new, modern audience, the Adidas x Palace golf collection launches at retail on February 21, 2020.

Your Reaction?
  • 6
  • LEGIT0
  • WOW0
  • LOL1
  • IDHT0
  • FLOP1
  • OB0
  • SHANK13

Continue Reading

WITB

Facebook

Trending