Connect with us

Equipment

It might be a good idea to cut down your driver

Published

on

There are a lot of ways to adjust your clubs at home with some simple tools, and one of the easiest jobs for the DIY golfer is cutting down clubs, especially cutting down a driver, and installing a new grip.

Cutting down a driver will have a number of impacts including making the driver more accurate because at a shorter length it is easier to control and make contact in the middle of the face.

PGA Tour driver length

Bryson DeChambeau testing a longer driver

On the PGA Tour, the average driver length is 45″, even though some golfers like Bryson DeChambeau with a Cobra SpeedZone and Adam Scott with a Titleist TSi4 *Prototype, have recently experimented with drivers close to the 48″ USGA limit to help pick up extra speed. Even Phil Mickelson has transitioned to a 47.5″ driver for extra speed, and has been using it on the Champions Tour and recently at The Match 3.

The longer driver theory works well for stronger and highly skilled players because of their ability to control a longer and heavier club at higher speeds, but for average golfers and most recreational players, this extra length means bigger misses and doesn’t always lead to extra speed—this is why playing a shorter length can help most golfers.

More on PGA Tour driver length: PGATour.com – Are long drivers here to stay?

Buying a new Driver

If you are buying a new driver, you can custom order any length you want through your retailer and the driver will be adjusted before final assembly. If you are buying a “stock” driver, most in the marketplace are now between 45.5″ and 46″ and many golfers struggle to control the club at those lengths. This is why many golfers choose to cut down their stock driver after purchase between 1″ and 1.5″.

What happens when you cut down a driver

When you cut down any club, especially a driver, it will feel lighter without any adjustment because you have moved the mass of the club closer to your hands. Just like a fulcrum scale used to measure mass, the closer the mass—in this case, the driver’s head gets to the fulcrum of the scale, the lighter it will “feel” to the golfer—this is called swing weight.

Thanks to adjustable drivers, it is easy to get extra weights from a manufacturer to help the driver feel the same before it was cut down, and as a general rule, for every 1″ you cut, you have to replace 12g back into the head,

To get an idea of what swing weight is, check out the video below that covers the subject.

TXG Driver length test

To see a shorter driver put to the test, check out the video by the team at TXG, where they compare a standard length 45″ driver to a 43″ driver and how they compare for distance and accuracy.

 

 

 

 

Your Reaction?
  • 393
  • LEGIT55
  • WOW17
  • LOL8
  • IDHT5
  • FLOP11
  • OB5
  • SHANK31

Ryan Barath is a club-fitter & master club builder with more than 17 years of experience working with golfers of all skill levels, including PGA Tour players. He is the former Build Shop Manager & Social Media Coordinator for Modern Golf. He now works independently from his home shop and is a member of advisory panels to a select number of golf equipment manufacturers. You can find Ryan on Twitter and Instagram where he's always willing to chat golf, and share his passion for club building, course architecture and wedge grinding.

18 Comments

18 Comments

  1. Colin

    Feb 19, 2021 at 4:11 pm

    I’m still working on what suits me best but, a purple ice shaft 65gms stiff works better than regular. I like to feel the head so changed from weight from 2 to 8gms, but still a work in progress lol

  2. Rick James

    Dec 20, 2020 at 9:47 pm

    Having spent time w/ Launch Monitor outputs I realized neutral face to path w/ driver is where its all at and I could do that w/ shorter lengths. I found better zones of contact on the face too w/ shorter lengths too that helped reduce spin. I tried to use 2.51 yds per MPH of clubhead speed to gauge if the length was giving me efficient results. I found shorter length was consistent.

  3. PSG

    Dec 10, 2020 at 9:41 am

    This article is fine, except for the part where you say a player might not pick up extra speed.

    Every half-inch is worth around 1.5 mph, for everyone. They might not pick up distance (because they don’t hit the middle) but every single human on earth swings a 48″ lever faster than a 45″ lever. That part is a little misleading.

  4. Ryan Hurley

    Dec 9, 2020 at 2:37 pm

    I work as a club fitter and see so many people come in with the notion they need longer drivers to match their longer irons

  5. Griff

    Dec 8, 2020 at 10:52 am

    I went from a M3 at 45.75 to an Epic sub zero cut -1 inch to 44.5 and I hit it better than any driver I’ve ever had. Hitting it in the sweet spot more often…I’m longer and more accurate. Gone from a 8 to a 5 handicap. Distance is not the issue for me…squeezing another 10 yards out of a driver is irrelevant b/c most of the time I’m hitting some type of wedge into the green. If I’m in play I’m going to score well. I’ve always struggled with driver consistency and cutting it shorter has really changed things without any performance drop off.

  6. JK

    Dec 7, 2020 at 8:59 pm

    Yup – cut down my Cobra F9 driver to play 44 5/8. added some swing weight to get it to D1 & drove the ball better this year than last 5 years.

  7. Imafitter

    Dec 7, 2020 at 6:02 pm

    LOL! I’ve been advocating this for years, and before I just retired from fitting, I had every customer, especially seniors, try shorter shafts. My Ping G400MAX comes standard with a 45.75″ shaft & D3, and when I was fitted by Ping at the PGA Show, they recommended 45″, which I ordered. This summer for fun I replaced the shaft with a Mits Diamana at 44″ and experimented with the weight which is now D0. Not only am I hitting it straighter, but longer than most of my senior league (and the 45″ shaft)! Others have hit my driver and done the same or similar adjustments. Amateurs need to get fit, quit buying off the rack, and experiment with different lengths.

  8. Martin

    Dec 7, 2020 at 5:39 pm

    Its wrong. Its not 12 grams per inch. Its actually 1.6 gram per swing weight. Does it matter? Yes, to some it does, cause we are all different and some of us are extremely sensitive to even the slightest weight difference. So if you cut down a driver 1 inch you the swing weight becomes 6 weights lighter, so to figure out how many grams you need to add you need 6×1.6 grams added to the head of the driver.

    • Ted Noel

      Jan 11, 2021 at 9:49 am

      Actually, we aren’t sensitive to “swing weight.” We are sensitive to “Dynamic Moment of Inertia.” SW is only the functional equivalent of DMOI at identical club lengths. That means if you test 6-irons and find the one you like, your progressive length set will feel best at the 6-iron, and all the rest will feel less good. That’s because to keep DMOI the same through the irons, you need to change head weight by about 9 grams per 1/2 inch change in length. To keep SW the same, the change is about 7 grams per 1/2 inch. This is another reason single length irons work so well. They all feel the same, just like Bobby Jones’ clubs.

      Ultimately, the best measurement point for DMOI is from about 4″ from the butt end, which puts it between your hands, which is the physical hinge point. Using that point, I can match your entire set so that you won’t be able to tell which club you are swinging blindfolded.

      Issues of flex and torque are separate concerns from DMOI and SW.

  9. Mike C

    Dec 6, 2020 at 6:02 am

    By 2022 half the players on the PGA tour will be using a driver between 47”-48” long. Eventually 47 1/2 inches will be the standard on tour and for off the rack purchases. I’m currently experimenting with a 48 inch Krank driver. So far so good.

    • phizzy

      Jan 5, 2021 at 5:50 pm

      I’d like to see how straight you hit that driver, lol

  10. Charles Mclaughlin

    Dec 6, 2020 at 1:34 am

    You can also grip your club an inch or two lower.

    • Jay

      Dec 10, 2020 at 11:37 pm

      The problem with gripping down is you change the swing weight dramatically. When cutting down a driver, you want to restore the SW to your optimal.

  11. Tyler Durden

    Dec 5, 2020 at 1:45 pm

    Just cutting off some length off the butt of your driver is a good way to ruin a club

    • Alan Garner

      Dec 7, 2020 at 3:57 pm

      Agreed, gripping down is a far safer and prsctical way. I do this on tight fairways and when hitting into the wind. Then you have the option to grip back up when the fairway is wide open and there is little trouble to give the ball maximum pencil! #bombs

      • Tyler Durden

        Dec 8, 2020 at 4:22 pm

        Exactly. I once had a GBB 8 degree driver with a aldila Longwood shaft at 47.5”. I could crank drives out at the full length, and found that I could grip down to the grip end and be more consistent than with my 3 wood. In my infinite wisdom, I was choking down pretty much every tee shot, so I decided to just cut off an inch. Long story short, totally ruined the feel of the driver, and two more purchases of the longwood shaft didn’t recreate the original feel.

Leave a Reply

Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Equipment

What’s your best club? – GolfWRXers discuss

Published

on

In our forums, our members have been discussing their best club. WRXer ‘Jbrunk’ kicks off the thread, asking:

“What’s the single club you rely on most? Not necessarily the one you use the most; it could be the one that you need to score. Give details: OEM, model, specs, shaft, etc. Why is it so good?”

He goes on to list his Ping G400 4 hybrid and Cleveland RTX Zipcore SW as his two best clubs, and our members have been sharing their favorites in our forum.

Here are a few posts from the thread, but make sure to check out the entire discussion and have your say at the link below.

  • Esox: “SM7 58-10 S grind Vokey. Flighted to flopped, great out of the firm bunkers I usually play. I am pretty darn good with it if I say so myself..”
  • lefthack: “So far, it depends on the day. Today I was hitting my best 5 wood shots. Some days it’s my wedges. It’s never my driver, but I’ve been fairway or first cut last 2 rounds, so look out. A club I’ve been able to count on most is my 7 iron. It’s that sweet spot.”
  • MtlJeff: “F9 tour 3 wood. I hit a very straight ball with it. It’s great off the tee, and I trust it on par 5s too.”
  • JeffreySpicolli: “My Titleist T-MB 2 iron. I hit it true. I hit it as if I’m throwing darts. I can hit it high. I can hit it low. I hit where it needs to go, even when the wind will blow.”
  • Davidv: “Bettinardi 2021 Queen B6 Putter.”

Entire Thread: “What’s your best club?”

Your Reaction?
  • 1
  • LEGIT2
  • WOW0
  • LOL2
  • IDHT0
  • FLOP1
  • OB0
  • SHANK1

Continue Reading

Equipment

Coolest thing for sale in the GolfWRX Classifieds (06/22/21): TaylorMade Sim Max 10.5 Driver (Head only)

Published

on

At GolfWRX, we love golf, plain and simple.

We are a community of like-minded individuals that all experience and express our enjoyment of the game in many ways. It’s that sense of community that drives day-to-day interactions in the forums on topics that range from best driver to what marker you use to mark your ball. It even allows us to share another thing we all love – buy and selling equipment.

Currently, in our GolfWRX buy/sell/trade (BST) forum, there is a listing for a TaylorMade Sim Max 10.5 Driver (Head only). ($280)

From the seller (@swingblues): “Unfortunately, my Sim Max head is too much loft for my swing and I am not a fade guy to tune it down. Loft is 10.5*. Head weight is 193.65 grams. Top of head and face is clean, no idiot marks.”

To check out the full listing in our BST forum, head through the link: TaylorMade Sim Max 10.5 Driver (Head only)

This is the most impressive current listing from the GolfWRX BST, and if you are curious about the rules to participate in the BST Forum you can check them out here: GolfWRX BST Rules

Your Reaction?
  • 1
  • LEGIT0
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

Equipment

New 2021 Titleist T-Series irons begin tour seeding (updated with in hand photos)

Published

on

In our forums, our members have been reacting to the latest irons from Titleist.

On Monday, Titleist posted photos of its new T100, T100S, T200, and U505 irons, which begin seeding on the PGA and European Tours this week. Our members have been sharing their thoughts on the latest additions, with the early impressions being very positive.

 

View this post on Instagram

 

A post shared by Titleist (@titleist)

“The New Titleist T100, T100•S, T200, and U•505 irons are now on tour! This marks the start of the tour validation process by some of the world’s best players – a critical step in the development of all high-performance Titleist golf equipment. Stay tuned to see some first impressions and more updates throughout the week.” – Titleist

Exclusive in-hand photos

Titleist T100 5-iron

Here are a few posts from the thread, but make sure to check out the entire discussion and have your say at the link below.

  • thebishop: “Wow. Those look really good. And the transition is complete now. We’ve gone from visible tech to hiding it all under the hood.”
  • Matty01984: “They look so so good! The thing that I always struggled with when it came to the original T100 was the look at the back. I got over it because they quite simply look incredible behind the ball, but Titleist has taken that up a notch with how they look.”
  • mtnbiker5: “Clean…”

Entire Thread: “New 2021 Titleist irons”

Exclusive in-hand photos

Your Reaction?
  • 161
  • LEGIT14
  • WOW15
  • LOL6
  • IDHT1
  • FLOP3
  • OB4
  • SHANK11

Continue Reading

WITB

Facebook

Trending