Equipment
It might be a good idea to cut down your driver
There are a lot of ways to adjust your clubs at home with some simple tools, and one of the easiest jobs for the DIY golfer is cutting down clubs, especially cutting down a driver, and installing a new grip.
Cutting down a driver will have a number of impacts including making the driver more accurate because at a shorter length it is easier to control and make contact in the middle of the face.
PGA Tour driver length
On the PGA Tour, the average driver length is 45″, even though some golfers like Bryson DeChambeau with a Cobra SpeedZone and Adam Scott with a Titleist TSi4 *Prototype, have recently experimented with drivers close to the 48″ USGA limit to help pick up extra speed. Even Phil Mickelson has transitioned to a 47.5″ driver for extra speed, and has been using it on the Champions Tour and recently at The Match 3.
The longer driver theory works well for stronger and highly skilled players because of their ability to control a longer and heavier club at higher speeds, but for average golfers and most recreational players, this extra length means bigger misses and doesn’t always lead to extra speed—this is why playing a shorter length can help most golfers.
More on PGA Tour driver length: PGATour.com – Are long drivers here to stay?
Buying a new Driver
If you are buying a new driver, you can custom order any length you want through your retailer and the driver will be adjusted before final assembly. If you are buying a “stock” driver, most in the marketplace are now between 45.5″ and 46″ and many golfers struggle to control the club at those lengths. This is why many golfers choose to cut down their stock driver after purchase between 1″ and 1.5″.
What happens when you cut down a driver
When you cut down any club, especially a driver, it will feel lighter without any adjustment because you have moved the mass of the club closer to your hands. Just like a fulcrum scale used to measure mass, the closer the mass—in this case, the driver’s head gets to the fulcrum of the scale, the lighter it will “feel” to the golfer—this is called swing weight.
Thanks to adjustable drivers, it is easy to get extra weights from a manufacturer to help the driver feel the same before it was cut down, and as a general rule, for every 1″ you cut, you have to replace 12g back into the head,
To get an idea of what swing weight is, check out the video below that covers the subject.
TXG Driver length test
To see a shorter driver put to the test, check out the video by the team at TXG, where they compare a standard length 45″ driver to a 43″ driver and how they compare for distance and accuracy.
- LIKE455
- LEGIT66
- WOW19
- LOL11
- IDHT7
- FLOP12
- OB7
- SHANK33
Whats in the Bag
Kevin Tway WITB 2024 (May)
- Kevin Tway what’s in the bag accurate as of the Wells Fargo Championship. More photos from the event here.
Driver: Ping G430 LST (10.5 degrees)
Shaft: Fujikura Ventus Black 6 X
3-wood: TaylorMade Stealth 2 (15 degrees)
Shaft: Mitsubishi Diamana D+ 80 TX
5-wood: TaylorMade Stealth 2 (18 degrees)
Shaft: Mitsubishi Diamana D+ 90 TX
Irons: Wilson Staff Utility (2), Titleist T100 (4-9)
Shafts: Mitsubishi MMT 100 TX (2), True Temper Dynamic Gold Tour Issue X100 (4-9)
Wedges: Titleist Vokey Design SM10 (48-10F @47, 52-12F @51, 56-14F), SM7 (60-10S)
Shafts: True Temper Dynamic Gold Tour Issue X100 (48-56), True Temper Dynamic Gold Tour Issue S400 (60)
Putter: Scotty Cameron T-5 Proto
Grip: Scotty Cameron Black Baby T
Grips: Golf Pride Tour Velvet Plus4
More photos of Kevin Tway’s WITB in the forums.
- LIKE0
- LEGIT0
- WOW0
- LOL0
- IDHT0
- FLOP0
- OB0
- SHANK0
Equipment
Did Rory McIlroy inspire Shane Lowry’s putter switch?
Editor’s note: This is an excerpt from a piece our Andrew Tursky originally wrote for PGATour.com’s Equipment Report. Head over there for the full article.
The timing of Lowry’s putter changeup was curious: Was he just using a Spider putter because he was paired with McIlroy, who’s been using a Spider Tour X head throughout 2024? Was Lowry just being festive because it’s the Zurich Classic, and he wanted to match his teammate? Did McIlroy let Lowry try his putter, and he liked it so much he actually switched into it?
Well, as it turns out, McIlroy’s only influence was inspiring Lowry to make more putts.
When asked if McIlroy had an influence on the putter switch, Lowry had this to say: “No, it’s actually a different putter than what he uses. Maybe there was more pressure there because I needed to hole some more putts if we wanted to win,” he said with a laugh.
To Lowry’s point, McIlroy plays the Tour X model, whereas Lowry switched into the Tour Z model, which has a sleeker shape in comparison, and the two sole weights of the club are more towards the face.
Lowry’s Spider Tour Z has a white True Path Alignment channel on the crown of his putter, which is reminiscent of Lowry’s former 2-ball designs, thus helping to provide a comfort factor despite the departure from his norm. Instead of a double-bend hosel, which Lowry used in his 2-ball putters, his new Spider Tour Z is designed with a short slant neck.
“I’ve been struggling on the greens, and I just needed something with a fresh look,” Lowry told GolfWRX.com on Wednesday at the 2024 Wells Fargo Championship. “It has a different neck on it, as well, so it moves a bit differently, but it’s similar. It has a white line on the back of it [like my 2-ball], and it’s a mallet style. So it’s not too drastic of a change.
“I just picked it up on the putting green and I liked the look of it, so I was like, ‘Let’s give it a go.’”
Read the rest of the piece over at PGATour.com.
- LIKE1
- LEGIT0
- WOW0
- LOL0
- IDHT0
- FLOP0
- OB0
- SHANK0
Equipment
Webb Simpson equipment Q&A: Titleist’s new 2-wood, 680 blade irons, and switching to a broomstick Jailbird
With seven career wins on the PGA Tour, including a U.S. Open victory, Webb Simpson is a certified veteran on the course. But he’s also a certified veteran in the equipment world, too. He’s a gearhead who truly knows his stuff, and he’s even worked closely with Titleist on making his own custom 682.WS irons.
On Wednesday at the 2024 Wells Fargo Championship, I caught up with Simpson to hear about his experience with Titleist’s new prototype 2-wood, how Titleist’s 680 Forged irons from 2003 ended up back in his bag, and why he’s switching into an Odyssey Ai-One Jailbird Cruiser broomstick putter this week for the first time.
Click here to read our full story about Simpson’s putter switch on PGATOUR.com’s Equipment Report, or continue reading below for my full Q&A with Simpson at Quail Hollow Club on Wednesday.
See Webb Simpson’s full WITB from the 2024 Wells Fargo Championship here
GolfWRX: It seems like you’ve been a little all over the place with your irons in the past six months or so, and now going back to the 680’s. Is that just a comfort thing? What’s been going on with the irons?
Webb Simpson: Titleist has been so great at working with me, and R&D, on trying to get an iron that kind of modernizes the 680. And so the 682.WS took the T100 grooves, but kinda took the look and the bulk and the build of the 680’s into one club. They’re beautiful, and awesome looking. I just never hit them that well for a consistent period of time. It was probably me, but then I went to T100’s and loved them. I loved the spin, the trajectory, the yardage, but again, I never went on good runs. Going through the ground, I couldn’t feel the club as well as with the blade. So last week, I’m like, ‘Alright. I’m gonna go back more for…comfort, and see if I can get on a nice little run of ball striking.’
So that’s why I went back.
View this post on Instagram
OK, that makes sense. I know you had done some 2-wood testing recently. Is that in the bag right now?
It’s like day-by-day. I used it at Hilton Head every day. Valero, I used it one round. And this week, me and my caddie will do the book every morning, and if it’s a day where we think we need it, we’ll just put it in and take the 3-wood out. I love it because it’s a super simple swap. Like, it doesn’t really change much.
Yeah, can you tell me about that club? I mean, we don’t really know anything about it yet. You know? I haven’t hit it or anything, obviously.
It has grooves like a 3-wood. Spin is perfect. And it’s honestly, like, everything is in the middle of a 3-wood and driver number. Trajectory, spin, carry, all of it. So, a Hilton Head golf course is almost too easy to talk about because, you know, there, so many holes are driver 3-wood.
Valero, our thinking was we had two par-5’s into the wind, and we knew that it would take two great shots to get there in two. So instead of hitting driver-driver, we just put it in. And I used it on those holes.
Hilton was a little easier because it was off-the-tee kind of questions. But Colonial will be a golf course where, you know, there’s a lot of driver or 3-woods. It’s kind of like a backup putter or driver for me now. I’ll bring it to every tournament.
So it’s, like, in your locker right now, probably?
Well, it would be. It’s in my house [because Webb lives near by Quail Hollow Club, and is a member at the course.] It’s in the garage.
Oh, yeah, that’s right. Do you know what holes you might use it out here if it goes in play?
Potentially 15, depending on the wind. Second shot on 10. Could be 14 off the tee. The chances here are pretty low (that he’ll use the 2-wood). But, like, Greensboro would be an awesome club all day. I’m trying to think of any other golf courses.
There’s plenty that it’ll be a nice weapon to have.
It’s interesting, the wave of 2-woods and mini drivers. Like, it’s just really taken off on Tour, and all the companies have seemed to embrace it.
Yeah. The thing I had to learn, it took me, like, at least a week to learn about it is you gotta tee it up lower than you think. I kept teeing it up too high. You need it low, like barely higher than a 3-wood. And that was where I got optimal spin and carry. If you tee it up too high, you just don’t get as much spin and lose distance, I don’t know if that’s just a mini driver thing.
And you obviously have a Jailbird putter this week. What spurred that on?
Inconsistent putting. I’m stubborn in a lot of ways when it comes to my equipment, but I have to be open minded – I just hadn’t putted consistently well in a while. And I’m like, ‘Man, I feel my ball-striking coming along. Like I feel better; for real, better.’
If I can just get something in my hands that I’m consistent with. Being on Tour, you see it every year, guys get on little runs. I can put together four to five tournaments where I’m all the sudden back in the majors, or in the FedExCup Playoffs. You can turn things around quick out here. I’m like, ‘Man, whatever’s going to get me there, great.’
My caddie, David Cook, caddied for Akshay at the Houston Open and he putted beautifully. Then, I watched Akshay on TV at Valero, and he putted beautifully. And, I’m like, ‘I’m just going to try it.’
I’ve never tried it for more than a putt or two, and I just ordered what Akshay uses. It was pretty awkward at first, but the more I used it, the more I’m like, ‘Man, it’s pretty easy.’ And a buddy of mine who’s a rep out here, John Tyler Griffin, he helped me with some setup stuff. And he said at Hilton Head, he wasn’t putting well, then tried it, and now he makes everything. He was very confident. So I’m like, ‘Alright, I’ll try it.’”
And you’re going with it this week?
Hundred percent.
Alright, I love it. Thank you, I always love talking gear with you. Play well this week.
Thanks, man.
See Webb Simpson’s full WITB from the 2024 Wells Fargo Championship here
- LIKE36
- LEGIT3
- WOW1
- LOL2
- IDHT0
- FLOP0
- OB0
- SHANK3
-
19th Hole3 weeks ago
Justin Thomas on the equipment choice of Scottie Scheffler that he thinks is ‘weird’
-
19th Hole3 weeks ago
‘Absolutely crazy’ – Major champ lays into Patrick Cantlay over his decision on final hole of RBC Heritage
-
19th Hole2 weeks ago
LET pro gives detailed financial breakdown of first week on tour…and the net result may shock you
-
19th Hole4 days ago
Report: LIV star turns down PGA Championship invite due to ‘personal commitments’
-
19th Hole1 week ago
Gary Player claims this is what ‘completely ruined’ Tiger Woods’ career
-
Whats in the Bag2 weeks ago
Team McIlowry (Rory McIlroy, Shane Lowry) winning WITBs: 2024 Zurich Classic
-
Equipment3 days ago
Details on Justin Thomas’ driver switch at the Wells Fargo Championship
-
Equipment1 week ago
Golf fans left surprised by LIV’s choice of course for its 2024 individual championship event
Colin
Feb 19, 2021 at 4:11 pm
I’m still working on what suits me best but, a purple ice shaft 65gms stiff works better than regular. I like to feel the head so changed from weight from 2 to 8gms, but still a work in progress lol
Rick James
Dec 20, 2020 at 9:47 pm
Having spent time w/ Launch Monitor outputs I realized neutral face to path w/ driver is where its all at and I could do that w/ shorter lengths. I found better zones of contact on the face too w/ shorter lengths too that helped reduce spin. I tried to use 2.51 yds per MPH of clubhead speed to gauge if the length was giving me efficient results. I found shorter length was consistent.
PSG
Dec 10, 2020 at 9:41 am
This article is fine, except for the part where you say a player might not pick up extra speed.
Every half-inch is worth around 1.5 mph, for everyone. They might not pick up distance (because they don’t hit the middle) but every single human on earth swings a 48″ lever faster than a 45″ lever. That part is a little misleading.
Jay
Dec 10, 2020 at 11:32 pm
I think they mean ball speed.
Ndhd
Dec 20, 2020 at 1:34 pm
This
Ryan Hurley
Dec 9, 2020 at 2:37 pm
I work as a club fitter and see so many people come in with the notion they need longer drivers to match their longer irons
Griff
Dec 8, 2020 at 10:52 am
I went from a M3 at 45.75 to an Epic sub zero cut -1 inch to 44.5 and I hit it better than any driver I’ve ever had. Hitting it in the sweet spot more often…I’m longer and more accurate. Gone from a 8 to a 5 handicap. Distance is not the issue for me…squeezing another 10 yards out of a driver is irrelevant b/c most of the time I’m hitting some type of wedge into the green. If I’m in play I’m going to score well. I’ve always struggled with driver consistency and cutting it shorter has really changed things without any performance drop off.
JK
Dec 7, 2020 at 8:59 pm
Yup – cut down my Cobra F9 driver to play 44 5/8. added some swing weight to get it to D1 & drove the ball better this year than last 5 years.
Imafitter
Dec 7, 2020 at 6:02 pm
LOL! I’ve been advocating this for years, and before I just retired from fitting, I had every customer, especially seniors, try shorter shafts. My Ping G400MAX comes standard with a 45.75″ shaft & D3, and when I was fitted by Ping at the PGA Show, they recommended 45″, which I ordered. This summer for fun I replaced the shaft with a Mits Diamana at 44″ and experimented with the weight which is now D0. Not only am I hitting it straighter, but longer than most of my senior league (and the 45″ shaft)! Others have hit my driver and done the same or similar adjustments. Amateurs need to get fit, quit buying off the rack, and experiment with different lengths.
Trent Walden
Feb 15, 2024 at 8:32 am
What about just choking down a little bit on your shaft?
Martin
Dec 7, 2020 at 5:39 pm
Its wrong. Its not 12 grams per inch. Its actually 1.6 gram per swing weight. Does it matter? Yes, to some it does, cause we are all different and some of us are extremely sensitive to even the slightest weight difference. So if you cut down a driver 1 inch you the swing weight becomes 6 weights lighter, so to figure out how many grams you need to add you need 6×1.6 grams added to the head of the driver.
Ted Noel
Jan 11, 2021 at 9:49 am
Actually, we aren’t sensitive to “swing weight.” We are sensitive to “Dynamic Moment of Inertia.” SW is only the functional equivalent of DMOI at identical club lengths. That means if you test 6-irons and find the one you like, your progressive length set will feel best at the 6-iron, and all the rest will feel less good. That’s because to keep DMOI the same through the irons, you need to change head weight by about 9 grams per 1/2 inch change in length. To keep SW the same, the change is about 7 grams per 1/2 inch. This is another reason single length irons work so well. They all feel the same, just like Bobby Jones’ clubs.
Ultimately, the best measurement point for DMOI is from about 4″ from the butt end, which puts it between your hands, which is the physical hinge point. Using that point, I can match your entire set so that you won’t be able to tell which club you are swinging blindfolded.
Issues of flex and torque are separate concerns from DMOI and SW.
Mike C
Dec 6, 2020 at 6:02 am
By 2022 half the players on the PGA tour will be using a driver between 47”-48” long. Eventually 47 1/2 inches will be the standard on tour and for off the rack purchases. I’m currently experimenting with a 48 inch Krank driver. So far so good.
phizzy
Jan 5, 2021 at 5:50 pm
I’d like to see how straight you hit that driver, lol
Charles Mclaughlin
Dec 6, 2020 at 1:34 am
You can also grip your club an inch or two lower.
Jay
Dec 10, 2020 at 11:37 pm
The problem with gripping down is you change the swing weight dramatically. When cutting down a driver, you want to restore the SW to your optimal.
Tyler Durden
Dec 5, 2020 at 1:45 pm
Just cutting off some length off the butt of your driver is a good way to ruin a club
Alan Garner
Dec 7, 2020 at 3:57 pm
Agreed, gripping down is a far safer and prsctical way. I do this on tight fairways and when hitting into the wind. Then you have the option to grip back up when the fairway is wide open and there is little trouble to give the ball maximum pencil! #bombs
Tyler Durden
Dec 8, 2020 at 4:22 pm
Exactly. I once had a GBB 8 degree driver with a aldila Longwood shaft at 47.5”. I could crank drives out at the full length, and found that I could grip down to the grip end and be more consistent than with my 3 wood. In my infinite wisdom, I was choking down pretty much every tee shot, so I decided to just cut off an inch. Long story short, totally ruined the feel of the driver, and two more purchases of the longwood shaft didn’t recreate the original feel.