Equipment

It might be a good idea to cut down your driver

Published

3 years ago

Dec 4, 2020

There are a lot of ways to adjust your clubs at home with some simple tools, and one of the easiest jobs for the DIY golfer is cutting down clubs, especially cutting down a driver, and installing a new grip.

Cutting down a driver will have a number of impacts including making the driver more accurate because at a shorter length it is easier to control and make contact in the middle of the face.

PGA Tour driver length

Bryson DeChambeau testing a longer driver

On the PGA Tour, the average driver length is 45″, even though some golfers like Bryson DeChambeau with a Cobra SpeedZone and Adam Scott with a Titleist TSi4 *Prototype, have recently experimented with drivers close to the 48″ USGA limit to help pick up extra speed. Even Phil Mickelson has transitioned to a 47.5″ driver for extra speed, and has been using it on the Champions Tour and recently at The Match 3.

The longer driver theory works well for stronger and highly skilled players because of their ability to control a longer and heavier club at higher speeds, but for average golfers and most recreational players, this extra length means bigger misses and doesn’t always lead to extra speed—this is why playing a shorter length can help most golfers.

More on PGA Tour driver length: PGATour.com – Are long drivers here to stay?

Buying a new Driver

If you are buying a new driver, you can custom order any length you want through your retailer and the driver will be adjusted before final assembly. If you are buying a “stock” driver, most in the marketplace are now between 45.5″ and 46″ and many golfers struggle to control the club at those lengths. This is why many golfers choose to cut down their stock driver after purchase between 1″ and 1.5″.

What happens when you cut down a driver

When you cut down any club, especially a driver, it will feel lighter without any adjustment because you have moved the mass of the club closer to your hands. Just like a fulcrum scale used to measure mass, the closer the mass—in this case, the driver’s head gets to the fulcrum of the scale, the lighter it will “feel” to the golfer—this is called swing weight.

Thanks to adjustable drivers, it is easy to get extra weights from a manufacturer to help the driver feel the same before it was cut down, and as a general rule, for every 1″ you cut, you have to replace 12g back into the head,

To get an idea of what swing weight is, check out the video below that covers the subject.

TXG Driver length test

To see a shorter driver put to the test, check out the video by the team at TXG, where they compare a standard length 45″ driver to a 43″ driver and how they compare for distance and accuracy.

Your Reaction?

LIKE455
LEGIT66
WOW19
LOL11
IDHT7
FLOP12
OB7
SHANK33

Related Topics:

Up Next

Should you be using a blade or mallet putter?

Don't Miss

GolfWRX Classifieds (12/4/20): Scotty Cameron X6, Cobra Big Tour, TaylorMade P7MC set

Ryan Barath

Ryan Barath is a club-fitter & master club builder with more than 17 years of experience working with golfers of all skill levels, including PGA Tour players. He is the former Build Shop Manager & Social Media Coordinator for Modern Golf. He now works independently from his home shop and is a member of advisory panels to a select number of golf equipment manufacturers. You can find Ryan on Twitter and Instagram where he's always willing to chat golf, and share his passion for club building, course architecture and wedge grinding.

19 Comments

Colin

Feb 19, 2021 at 4:11 pm

I’m still working on what suits me best but, a purple ice shaft 65gms stiff works better than regular. I like to feel the head so changed from weight from 2 to 8gms, but still a work in progress lol

Reply Report comment
Rick James

Dec 20, 2020 at 9:47 pm

Having spent time w/ Launch Monitor outputs I realized neutral face to path w/ driver is where its all at and I could do that w/ shorter lengths. I found better zones of contact on the face too w/ shorter lengths too that helped reduce spin. I tried to use 2.51 yds per MPH of clubhead speed to gauge if the length was giving me efficient results. I found shorter length was consistent.

Reply Report comment
PSG

Dec 10, 2020 at 9:41 am

This article is fine, except for the part where you say a player might not pick up extra speed.

Every half-inch is worth around 1.5 mph, for everyone. They might not pick up distance (because they don’t hit the middle) but every single human on earth swings a 48″ lever faster than a 45″ lever. That part is a little misleading.

Reply Report comment
- Jay
  
  Dec 10, 2020 at 11:32 pm
  
  I think they mean ball speed.
  
  Reply Report comment
  - Ndhd
    
    Dec 20, 2020 at 1:34 pm
    
    This
    
    Reply Report comment
Ryan Hurley

Dec 9, 2020 at 2:37 pm

I work as a club fitter and see so many people come in with the notion they need longer drivers to match their longer irons

Reply Report comment
Griff

Dec 8, 2020 at 10:52 am

I went from a M3 at 45.75 to an Epic sub zero cut -1 inch to 44.5 and I hit it better than any driver I’ve ever had. Hitting it in the sweet spot more often…I’m longer and more accurate. Gone from a 8 to a 5 handicap. Distance is not the issue for me…squeezing another 10 yards out of a driver is irrelevant b/c most of the time I’m hitting some type of wedge into the green. If I’m in play I’m going to score well. I’ve always struggled with driver consistency and cutting it shorter has really changed things without any performance drop off.

Reply Report comment
JK

Dec 7, 2020 at 8:59 pm

Yup – cut down my Cobra F9 driver to play 44 5/8. added some swing weight to get it to D1 & drove the ball better this year than last 5 years.

Reply Report comment
Imafitter

Dec 7, 2020 at 6:02 pm

LOL! I’ve been advocating this for years, and before I just retired from fitting, I had every customer, especially seniors, try shorter shafts. My Ping G400MAX comes standard with a 45.75″ shaft & D3, and when I was fitted by Ping at the PGA Show, they recommended 45″, which I ordered. This summer for fun I replaced the shaft with a Mits Diamana at 44″ and experimented with the weight which is now D0. Not only am I hitting it straighter, but longer than most of my senior league (and the 45″ shaft)! Others have hit my driver and done the same or similar adjustments. Amateurs need to get fit, quit buying off the rack, and experiment with different lengths.

Reply Report comment
- Trent Walden
  
  Feb 15, 2024 at 8:32 am
  
  What about just choking down a little bit on your shaft?
  
  Reply Report comment
Martin

Dec 7, 2020 at 5:39 pm

Its wrong. Its not 12 grams per inch. Its actually 1.6 gram per swing weight. Does it matter? Yes, to some it does, cause we are all different and some of us are extremely sensitive to even the slightest weight difference. So if you cut down a driver 1 inch you the swing weight becomes 6 weights lighter, so to figure out how many grams you need to add you need 6×1.6 grams added to the head of the driver.

Reply Report comment
- Ted Noel
  
  Jan 11, 2021 at 9:49 am
  
  Actually, we aren’t sensitive to “swing weight.” We are sensitive to “Dynamic Moment of Inertia.” SW is only the functional equivalent of DMOI at identical club lengths. That means if you test 6-irons and find the one you like, your progressive length set will feel best at the 6-iron, and all the rest will feel less good. That’s because to keep DMOI the same through the irons, you need to change head weight by about 9 grams per 1/2 inch change in length. To keep SW the same, the change is about 7 grams per 1/2 inch. This is another reason single length irons work so well. They all feel the same, just like Bobby Jones’ clubs.
  
  Ultimately, the best measurement point for DMOI is from about 4″ from the butt end, which puts it between your hands, which is the physical hinge point. Using that point, I can match your entire set so that you won’t be able to tell which club you are swinging blindfolded.
  
  Issues of flex and torque are separate concerns from DMOI and SW.
  
  Reply Report comment
Mike C

Dec 6, 2020 at 6:02 am

By 2022 half the players on the PGA tour will be using a driver between 47”-48” long. Eventually 47 1/2 inches will be the standard on tour and for off the rack purchases. I’m currently experimenting with a 48 inch Krank driver. So far so good.

Reply Report comment
- phizzy
  
  Jan 5, 2021 at 5:50 pm
  
  I’d like to see how straight you hit that driver, lol
  
  Reply Report comment
Charles Mclaughlin

Dec 6, 2020 at 1:34 am

You can also grip your club an inch or two lower.

Reply Report comment
- Jay
  
  Dec 10, 2020 at 11:37 pm
  
  The problem with gripping down is you change the swing weight dramatically. When cutting down a driver, you want to restore the SW to your optimal.
  
  Reply Report comment
Tyler Durden

Dec 5, 2020 at 1:45 pm

Just cutting off some length off the butt of your driver is a good way to ruin a club

Reply Report comment
- Alan Garner
  
  Dec 7, 2020 at 3:57 pm
  
  Agreed, gripping down is a far safer and prsctical way. I do this on tight fairways and when hitting into the wind. Then you have the option to grip back up when the fairway is wide open and there is little trouble to give the ball maximum pencil! #bombs
  
  Reply Report comment
  - Tyler Durden
    
    Dec 8, 2020 at 4:22 pm
    
    Exactly. I once had a GBB 8 degree driver with a aldila Longwood shaft at 47.5”. I could crank drives out at the full length, and found that I could grip down to the grip end and be more consistent than with my 3 wood. In my infinite wisdom, I was choking down pretty much every tee shot, so I decided to just cut off an inch. Long story short, totally ruined the feel of the driver, and two more purchases of the longwood shaft didn’t recreate the original feel.
    
    Reply Report comment

Cancel reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Equipment

A shocking Backstryke putter appearance + 7 interesting gear photos from the Zurich Classic

Published

11 hours ago

Apr 25, 2024

Andrew Tursky

Welcome to New Orleans, where TPC Louisiana plays host to the 2024 Zurich Classic. In between breakfast beignets and nightly Creole feasts, PGA Tour players are also competing in the unique two-man format at the Zurich this week.

Although the vibes in Nawlins are a bit lighter-fare than the recent back-to-back competitions the Masters and the RBC Heritage signature event), the gear news was no less serious this week.

We spotted some recent changes from Rory McIlroy, a very rare Odyssey Backstryke putter, dove into the bag of legendary New Orleans Saints quarterback Drew Brees, and spotted Patrick Cantlay continuing to test new equipment.

Get your beads out and crack your crawfish, because it’s time for an equipment rundown from The Big Easy (meaning New Orleans, of course, not Ernie Els).

See all of our photos from the Zurich Classic here

Rory’s on-and-off lob wedge

Since the end of 2023, Rory McIlroy has had an on-again, off-again relationship with a Titleist Vokey K-Grind lob wedge. In his last start, it was on, and the wedge is back in the bag again this week. We got a great look at the complicated grind that McIlroy uses.

View this post on Instagram

A post shared by GolfWRX (@golfwrx)

A full look into McIlroy’s bag above also shows that he switched out of the TaylorMade BRNR Mini Copper that he used at the RBC Heritage, and he’s back into the Qi10 core 3-wood. As we discussed last week, McIlroy will likely keep the BRNR around as a course-specific club, trading it in and out for the 3-wood.

See Rory McIlroy’s full 2024 WITB from the Zurich here

Turning Back the clock

Unless Tommy Gainey is in the field, it’s unlikely you’ll ever see Odyssey’s Backstryke technology make an appearance on the PGA Tour.

But then, when you least expect it, Russ Cochran shows up.

For more than a decade – since the 2013 Sony Open in Hawai’i – Cochran has been stuck on 599 PGA Tour starts. This week will be his 600th.

Cochran is in the field at the Zurich this week playing alongside Eric Cole, whose regular caddie is Reed Cochran, Russ’s son.

The Backstryke putter was first released back in 2010, and its unique design helps shift the axis point of the putter closer to the CG of the head. And, the putter is getting a nod this week at the Zurich Classic, thanks to Cochran’s 600th career PGA Tour start.

The putter is certainly awesome, but don’t forget to check out Cochran’s full WITB from this week.

Drew Brees with a Super Bowl winning Scotty Cameron putter

Drew Brees, a legendary retired quarterback for the hometown New Orleans Saints, made an appearance at the Zurich’s Wednesday Pro-Am, playing alongside Zach Johnson, Ryan Palmer, and current Saints QB Derek Carr.

Brees’ bag included a TaylorMade Stealth2 Plus driver, a BRNR Mini 13.5-degree, a Stealth 5-wood, a mixed set of P-790 and P-760 irons, Milled Grind Hi-Toe wedges, and a custom Scotty Cameron “New Orleans Saints” putter, which Scotty made for Brees following his Super Bowl MVP-winning performance in 2010.

View this post on Instagram

A post shared by GolfWRX (@golfwrx)

It should also be noted that Brees has his Venmo QR code as a bag tag.

If you’re gambling with Brees on the course, just know that not having cash won’t work as an excuse.

Brilliant.

See Drew Brees’ full WITB from the Zurich here

Stricker’s unrecognizable putter

Steve Stricker has made numerous upgrades to his bag recently, including a new TSR3 driver and T100 irons, but his longtime Odyssey White Hot No. 2 putter is still going strong. It’s the most recognizable unrecognizable putter ever.

Here’s a better look at Stricker’s flatstick, which he started using back in 2007.

View this post on Instagram

A post shared by GolfWRX (@golfwrx)

Patrick Cantlay has opened the equipment-switching floodgates

Over on the PGA Tour’s Equipment Report this week, we covered Cantlay’s recent switch into Ping Blueprint S irons, and a Titleist TSR2 driver.

Cantlay hadn’t switched irons for about seven years, so the iron switch he made at The 2024 Masters came as a shock to the norm. He simply isn’t one to change gear very often, so anytime Cantlay makes a switch, it’s news.

It seems the floodgates of equipment testing have opened up a bit for Cantlay, who was also spotted testing a custom Scotty Cameron blade putter on Tuesday this week. By Wednesday, Cantlay was back practicing with his familiar Scotty Cameron T5 Proto mallet, but it’s certainly something to keep an eye on going forward.

Daniel Berger’s custom Jailbird site lines

Berger, who’s currently using Odyssey’s Ai-One Mini Jailbird mallet putter, has a unique 3-dot, 2-line alignment on the crown of his navy-white-navy-white mallet putter. Looking down at the putter, it’s easy to see why this alignment system would help; it just seems impossible to set up to the ball off-center, or misaligned to the target.

Also, for anyone worried, you can rest easy. Yes, he’s still playing the 2013 TaylorMade TP MC irons, which we highlighted in our recent “Modern Classics: Old vs. New” video testing series.

FitzMagic teams back up

Brothers Matthew and Alex Fitzpatrick are teaming up once again at the Zurich this year, and Bettinardi Golf hooked them up with some festive “FitzMagic” headcovers to match this week.

See what else is in Alex Fitzpatrick’s WITB here

And, with that, we say goodbye to the Zurich Classic in New Orleans. Don’t forget to check out all of our photos from this week, including 30 unique photo galleries full of equipment photos.

We’ll see you next week in Texas for the 2024 CJ Cup Byron Nelson!

Your Reaction?