Connect with us

Equipment

Review: Ping Anser Forged irons

Published

on

In golf, Ping is known as a company that produces high-quality cast irons for golfers of all ability levels – everyone from high handicappers to 2012 Masters champ Bubba Watson. Despite the fact that five of the PGA Tour’s Top-10 ranked golfers in Greens in Regulation in 2012 used cast irons, some golfers are convinced that cast irons are inferior to irons that are forged.

While it is unfair to say that cast irons are always inferior to forged irons, cast irons generally have two distinct drawbacks. First, they often feel harsh at impact when compared to forged clubs, which tend to produce a softer feel. Cast irons are also tougher to bend, which can make it hard for golfers to dial in their lofts and lie angles.

Ping recognized the desire of many golfers to play forged irons, which is why the company released its first forged iron in decades in 2011, the Anser Forged. The irons were smaller than most Ping cavity back irons, which made them visually appealing to golfers who preferred the look of a compact iron at address. They also offered the softer feel that forged iron fans wanted

As expected, the Anser Forged were most popular in Japan and Asia, areas where forgings have a much broader appeal. But they were also well received by a small crowd of U.S. golfers who were anxious to finally try a modern forged iron from Ping. Ping received feedback, however that the average golfer had difficulty hitting the Anser Forged long irons high enough for them to be effective. This made the clubs suitable for a very small group of golfers – players who wanted a compact forged iron but didn’t need help hitting the ball higher.

[youtube id=”abn-ZOpzrgM” width=”600″ height=”350″]

In an effort to broaden the appeal of the Anser Forged, Ping re-engineered the irons for 2013. And they set the bar high, setting out to make “the ultimate forged iron.” Like the previous model, the new Anser Forged irons come with a steep price tag (expect to pay between $1300 and $1500 for a stock set). But if you can stomach the cost, you’ll have a set of irons that blend good looks and performance as well as any forged iron available.

Better looks and forgiveness?

The new Anser Forged are longer and more forgiving than the previous Anser Forged irons, especially in the long irons. Engineers made the soles of the long irons wider, which according to Ping senior design engineer Marty Jertson is the easiest way to make an iron fly higher.

But the added sole width came at a cost. Many good players hesitate to play an iron that has a visible sole at address. On the 2011 Ping Anser irons, golfers could only see the top line of the irons at address. But in the 2013 model, the sole is visible behind the top line on the 3 and 4 irons.

*2011 Anser Forged 3 Iron (Left) and the 2013 Anser Forged 3 Iron (right)


Engineers also added more offset to the long irons, another visual aspect that some good players can find unappealing. Offset is the space between the forward portion of the hosel and the front of the clubface. For many good golfers, offset can be a bad word. This is because the more offset a club has, the higher a shot will fly, which can cause problems for good golfers who like to hit low shots.

“The more offset you put on the club, the more the clubhead wants to catch up with the shaft,” Jertson said. “[During the downswing] the head is lagging behind the shaft, but right at impact the head kicks forward and starts to lead the shaft. The offset increases initial launch angle.”

The long irons just don’t have more offset, they also have larger heads to make them more forgiving. Good players might balk at the looks of the revamped 3 and 4 irons, but once they hit them their aesthetics will become less important. Players tempted to replace their long irons with hybrids likely won’t need to with 2013 Anser Forged. The 3 and 4 irons have the distance and forgiveness of many hybrids, but offer the trajectory control and soft feel of a forged iron.

The larger size of the 3 and 4 irons are a special case, however. Jertson and his team felt the extra bulk was worth the added performance. But the rest of the 2013 Anser Forged irons get progressively smaller and have less offset throughout the set. That’s because there are plenty of ways for engineers to add forgiveness without adding bulk.

Big forgiveness, small clubhead

Contrary to what many good golfers believe, thick toplines serve a purpose greater than adding visual confidence at address for less-skilled players. Just as heel-toe weighting adds forgiveness to shots hit on the heel and toe, weight above and below the sweetspot adds forgiveness to shots hit in those areas as well. That’s why Ping thickened the toplines of the Anser Forged irons. But unless you took a caliper and measured the toplines, you wouldn’t know they were any thicker. That’s because Ping engineers shaped the topline in such a way that they could hide mass underneath it. This makes the revamped irons more visually appealing to good players and adds better performance on mishits as well.

Jertson said that all Ping irons are designed to provide maximum forgiveness for their size. Like Ping’s most blade-like iron, the S56, engineers added tungsten weights and the strategically placed bars in the cavity of the irons that add forgiveness and tune the center of gravity. But because the 2013 Anser Forged Irons are larger than the S56 irons, they were able to add forgiveness on a larger scale.

*2011 Anser Forged 7 Iron (left) vs. 2013 Anser Forged 7 Iron (right)


Each of the 2013 Anser Forged irons have an enormous tungsten sole weight that moves the center of gravity lower and deeper for faster ball speeds. The bars in the cavity are also specialized for each iron — on the long irons, they are thinner and extend horizontally for a lower center of gravity. On the short irons, engineers made the bars thicker and more vertical. This makes them more forgiving on shots hit above and below the sweet spot and helps golfers flight the ball as well. All together, the sneaky thick toplines, tungsten soles and strategically placed bars add a huge amount of forgiveness, making the Anser Forged irons play much more forgiving than their sizes indicate.

Miguel Angel Jimenez became the first to win with the 2013 Anser Forged irons at the UBS Hong Kong Open in November 2012 and Hunter Mahan put the irons in his bag at the World Challenge two weeks later. Both players were previously playing the smaller, less-forgiving S56 irons. That’s a testament to how good these irons look, even to the discerning eye of a top tour pro.

Looks: The 3 and 4 irons are a bit on the chunky side, but the 5 iron though pitching wedge look like forged cavity back irons should. While the irons get smaller as they work down the set, they are all larger than blades. But they’re not too much bigger than the S56 and forged cavity back irons aimed at better players.

Playability and Performance: This is where the Anser Forged Irons shine. They’re not too much bigger than the top tier of players irons, but they are much more forgiving. The tungsten weighting and angled bars offer substantial forgiveness and fine-tuned trajectory throughout the set without added bulk.

Flight and distance: Long irons launch easy and won’t balloon for better players with the right shaft. The mid-and-short irons offer workability, and are able to be flighted when necessary. Distance won’t be a problem with these. No problems working the ball, either.

Feel: The irons are forged from 8620 carbon steel, but don’t feel as soft as other forgings because of their multi-material construction and their deeply milled cavities. It’s a “squish” feel at impact — an improvement over the clicky sound of most Ping irons, but definitely not the buttery feel that some forged irons produce.

Cost: The key to getting more forgiveness out of a small, forged clubhead like the new Anser Forged is the deep cavities in the back of the club. They give engineers the ability to redistribute weight in the most optimal places. It took multiple forging and milling steps to get the Anser Forged’s 8620 steel as thin as necessary in certain areas, which is why they’re so expensive.

Bottom Line: If you want one of the highest-quality, highest-performing forged irons on the planet, these irons are for you. If cost is an issue, consider Ping’s i20, which cost around $1000. They don’t feel as good or look as good as the Anser Forged irons, but they’re slightly more playable thanks to a little more offset and a larger blade size.

Click here for more discussion in the “Equipment” forum. 

Click here for more discussion in the “Equipment” forum. 

Your Reaction?
  • 88
  • LEGIT14
  • WOW14
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK4

19 Comments

19 Comments

  1. Mike

    Jul 6, 2015 at 9:20 pm

    I have a set of ping anser forged irons I bought last year.3 iron through pitching wedge.They have the KBS tour stiff shafts in them.I hit a bucket of balls with them.The 3 iron has never been hit.I bought them last yr.They are white dot which is an inch over regular.I paid 1400 for them.Hit me up if u want to know more
    I need to sell them

  2. carl

    Jul 1, 2013 at 1:28 am

    I bought a set of irons with GRAPHITE shafts. sorry I hate them, if you hit it flush you dont seem to even feel the ball at impact.!! but if you dont hit it flush it sounds and feels aweful.!! They dont seem to have the distance either..I remember now that was why i got rid of my old eye 2’s…short on length for the lofts…10 yds less than most other clubs I have tried. The callaway FTI irons seem to suit me better so I will go back to them..

  3. Chris

    May 2, 2013 at 7:25 pm

    After owning all Titleist for the last 9 nine years, I switched and bought the 2013 Anser irons. Price was not a deterrent, and the performance is amazing.

  4. Robert

    Mar 21, 2013 at 3:48 pm

    Just purchased a set of Anser irons. I’ve played the MP64 and they are a great set, but the long irons a difficult at best to hit. Pings are more forgiving and look great at address and the 4 iron really helps you get the ball in the air. They have a crisp feel to them and it’s easy to move the ball either direction. They have lots of bounce, so it would be easy to increase/decrease the loft and the forging lets you do that. That was the best part, you can take them to the range and really dail in your flight and then change the specs. Can’t do that with the I20 and they also have better feel than the I20 (Unless your’re a pro and have access to unlimited wets and the tour van!). I suppose if you play golf almost everyday, then maybe you can get into the MP64. Practice baby practice…you’ll need it!

  5. MattB

    Feb 11, 2013 at 12:59 pm

    Was reading another article by Rob Miller regarding the anser forged irons, that stated can be ordered with any shaft in ping wrx matrix at no additional cost. Had local pro try to order set with DG Tour issue S400 shafts and Ping wanted a $21 upcharge. Where did you guys get this information from???

    • Challenger

      Mar 3, 2013 at 1:47 am

      I’ve played a bunch of irons including forged offerings from Mizuno, Titleist and Callaway and in the end the Ping Anser was my choice. The best part is I made the right choice and I’m pretty darn happy that I did. Better distance, similar feel and way more forgiving. Looks great looking down at set up and the results are there.

    • MattB

      Mar 3, 2013 at 6:54 am

      UPDATE: The local ping sales rep agreed to supply the DGTI S400 shafts for no upcharge due to all the misinformation I recieved from website as well as Ping customer service.

  6. Tony Lopez

    Feb 8, 2013 at 1:58 pm

    After visiting several retailers hitting the demo 7 iron flush time and time again, cuts and draws as easy as pie, I found a primo set in San Diego a couple of weeks ago. Same trip I hooked up with matching 52 and 58 Anser wedges. The guys bent the lies to my specs no charge. After chopping it around all summer in the mid 80’s, I played these for 3 rounds so far and I am stoked to say, I am back shooting in the low 70’s!!
    Yeah, I like ’em!

  7. Alan

    Jan 7, 2013 at 6:05 pm

    Mine came today, customized from PING WRX. They look impressive and feel even more impressive given the extreme forgiveness. Who wouldn’t put in play the most forgiving, workable forging they could find? Having owned s56’s prior to these, there is no comparison. Sure, the long irons look a bit chunky. However, as most players irons see the longer clubs in the set with little or no bounce, these have as much as 4 degrees and feel remarkable at impact. Easy to launch. They carry long and high but without ballooning or excessive spin. With the correct shaft fitting (flex and kick point), it will be very difficult to ignore the unmatched performance characteristics of this club.

  8. Dominic Chong

    Jan 4, 2013 at 9:49 pm

    Looks like something I would want.
    A forged set from PING should be great.

  9. Leonard

    Dec 20, 2012 at 10:30 pm

    I like mine but admit I waited to find a “preowned” set at a more reasonable price. Got the matching Anser wedges as well.

  10. Lee

    Dec 20, 2012 at 4:41 am

    I’ve tried them and they are nice clubs I admit to being a Ping fan and game I20’s (which for me out perform the Ansers) however if I was going to go back to forged irons the price differential between the Ansers and superb Mizuno MP64’s means only one winner for me.

  11. lefty

    Dec 12, 2012 at 7:50 pm

    I have i20’s which I love but I do not like that weight piece in the back of the earlier Ansers as the i15’s and i10’s had. They will fall out after awhile which I don’t think Ping suspected. The new Anser has much cleaner lines, I could want that club.

  12. pablo

    Dec 11, 2012 at 4:04 pm

    I used ping zings until last year when i upgraded to bridgestone j40 forged, which are the best feeling clubs i’ve ever hit. my gap, sand, and lob wedges are copper ping IST though, as nothing feels as good as those!

  13. Leonard

    Dec 8, 2012 at 11:29 pm

    Cobra Amps more your style Nick? To each his own!

  14. Nick

    Dec 6, 2012 at 4:33 pm

    I’ve never liked the look of Ping irons. They have that 70 year old grandpa look to me.

    • wcmcca

      Jan 12, 2013 at 6:38 pm

      The 70 year old grandpa that takes your lunch money week after week you mean, right Nick?

    • Jack

      Mar 19, 2013 at 12:07 pm

      Except when I hit with them usually they are better shots than with my own set. Must be a sign… But I hate the hosel design on their regular irons

  15. Matthew

    Dec 3, 2012 at 10:54 pm

    I love how Ping tries to enter the “forged” market and still has a HUGE offset on everything.. from a “players” perspective- just looks like a hooker of a club… makes me sick.

Leave a Reply

Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Whats in the Bag

Kris Kim WITB 2024 (May)

Published

on

Driver: TaylorMade Qi10 (9 degrees @7)
Shaft: Mitsubishi Tensei 1K White 60 TX

3-wood: TaylorMade Qi10 Tour (15 degrees @13.5)
Shaft: Mitsubishi Diamana WB 73 TX

Irons: TaylorMade P770 (2, 4), TaylorMade P7MB (5-PW)
Shafts: Mitsubishi Tensei 1K White 80 TX (2), Nippon N.S. Pro Modus3 Tour 120 X

Wedges: TaylorMade MG4 (50-09SB, 56-12SB, 60-11TW)
Shafts: Nippon N.S. Pro Modus3 WV 125

Putter: TaylorMade Spider Tour

Grips: Golf Pride Tour Velvet Cord

Check out more in-hand photos of Kris Kim’s equipment here.

 

View this post on Instagram

 

A post shared by GolfWRX (@golfwrx)

Your Reaction?
  • 0
  • LEGIT0
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

Equipment

Welcome to the family: TaylorMade launches PUDI and PDHY utility irons

Published

on

TaylorMade is continuing its UDI/DHY series with the successor to the Stealth UDI and DHY utility irons: PUDI and PDHY (which the company styles as P·UDI and P·DHY). TaylorMade is folding the designs in with its P Series of irons.

TaylorMade outlined the process of developing its new utilities this way. The company started with the data on utility iron usage. Not surprisingly, better players — i.e. those who generate more clubhead speed and strike the ball more precisely — were found to gravitate toward the UDI model. DHY usage, however, covered a wider swath than the company might have expected with six-to-18 handicappers found to be bagging the club.

TaylorMade also found that the majority of golfers playing UDI or DHY utilities were playing P Series irons at the top of their iron configurations.

Can you see where this is going?

Matt Bovee, Director of Product Creation, Iron and Wedge at TaylorMade: “As we look to the future, beyond the tech and the design language, we are excited about repositioning our utility irons into the P·Series family. P·UDI is an easy pair for players that currently play P·Series product and P·DHY is an extremely forgiving option for players of all skill levels. It is a natural fit to give these players the performance in this category that they are looking for.”

 

View this post on Instagram

 

A post shared by GolfWRX (@golfwrx)

TaylorMade PUDI

TaylorMade PUDI technology cutaway (via TaylorMade)

Crafted with tour player input, TaylorMade sought to develop a confidence-inspiring utility iron that blends with the rest of the P Series irons. Also of note: Interestingly, the PUDI has a more compact head than the P790.

In comparison to past UDI products, the PUDI has a more traditional iron shape, slimmer toplines, and less offset with a little of the backbar visible at address.

TaylorMade PDHY

TaylorMade PDHY tech cutaway (via TaylorMade).

Larger in profile than the PUDI, the PDHY seeks to position center of gravity (CG) lower in the club for ease of launch. The toe height is larger and the profile is larger at address — roughly five millimeters longer than PUDI — the sole of the club is wider for improved forgiveness.

Club Junkie’s take

Golfers who feel like they are missing something at the top of the bag could find the PUDI or PDHY a great option. The look of the PUDI should fit the most discerning eye with a more compact look, less offset, and a thinner topline. If you want a little more confidence looking down the P-DHY will be slightly larger while still being a good-looking utility iron.

For being small packages both models pack a pretty good punch with fast ball speeds, even off-center. The feel is soft and you get a solid feel of the ball compressing off the face when you strike it well. Your ears are greeted with a nice heavy thud as the ball and club come together. The PDHY will launch a little higher for players who need it while the PUDI offers a more penetrating ball flight. Both utility irons could be the cure for an open spot in the top end of the bag.

PUDI, PDHY, or Rescue?

TaylorMade offers the following notes to assist golfers in filling out their bags:

  • PUDI has mid-CG right behind the center face to create a more penetrating mid-to-low ball flight
  • PDHY has a lower center of gravity to produce an easier-to-launch mid-to-high ball flight.
  • Both PUDI and PDHY are lower-flying than the company’s hybrid/Rescue clubs.
  • PUDI is more forgiving than P790.
  • PDHY is the most forgiving iron in the entire TaylorMade iron family

Pricing, specs, and availability

Price: $249.99

At retail: Now

Stock shafts: UST Mamiya’s Recoil DART (105 X, 90 S and 75 R – only in PDHY)

Stock grip: Golf Pride’s ZGrip (black/grey)

PUDI lofts: 2-17°, 3-20°, 4-22° in both left and right-handed

PDHY lofts: 2-18°, 3-20° and 4-22° in both left and right-handed

Your Reaction?
  • 15
  • LEGIT4
  • WOW3
  • LOL3
  • IDHT1
  • FLOP2
  • OB2
  • SHANK4

Continue Reading

Equipment

Coolest thing for sale in the GolfWRX Classifieds (5/3/24): Scotty Cameron Champions Choice 2.5+ putter

Published

on

At GolfWRX, we are a community of like-minded individuals that all experience and express our enjoyment of the game in many ways.

It’s that sense of community that drives day-to-day interactions in the forums on topics that range from best driver to what marker you use to mark your ball. It even allows us to share another thing we all love – buying and selling equipment.

Currently, in our GolfWRX buy/sell/trade (BST) forum, there is a listing for a Scotty Cameron Champions Choice 2.5+ putter

From the seller: (@wwcl): “Has been gamed as pics show. 33.5 includes original h/c and grip. $575 includes shipping and PP fees.”

To check out the full listing in our BST forum, head through the link: Scotty Cameron Champions Choice 2.5+ putter

This is the most impressive current listing from the GolfWRX BST, and if you are curious about the rules to participate in the BST Forum you can check them out here: GolfWRX BST Rules

Your Reaction?
  • 1
  • LEGIT1
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

WITB

Facebook

Trending