Connect with us

Equipment

Review: Ping Anser Forged irons

Published

on

In golf, Ping is known as a company that produces high-quality cast irons for golfers of all ability levels – everyone from high handicappers to 2012 Masters champ Bubba Watson. Despite the fact that five of the PGA Tour’s Top-10 ranked golfers in Greens in Regulation in 2012 used cast irons, some golfers are convinced that cast irons are inferior to irons that are forged.

While it is unfair to say that cast irons are always inferior to forged irons, cast irons generally have two distinct drawbacks. First, they often feel harsh at impact when compared to forged clubs, which tend to produce a softer feel. Cast irons are also tougher to bend, which can make it hard for golfers to dial in their lofts and lie angles.

Ping recognized the desire of many golfers to play forged irons, which is why the company released its first forged iron in decades in 2011, the Anser Forged. The irons were smaller than most Ping cavity back irons, which made them visually appealing to golfers who preferred the look of a compact iron at address. They also offered the softer feel that forged iron fans wanted

As expected, the Anser Forged were most popular in Japan and Asia, areas where forgings have a much broader appeal. But they were also well received by a small crowd of U.S. golfers who were anxious to finally try a modern forged iron from Ping. Ping received feedback, however that the average golfer had difficulty hitting the Anser Forged long irons high enough for them to be effective. This made the clubs suitable for a very small group of golfers – players who wanted a compact forged iron but didn’t need help hitting the ball higher.

[youtube id=”abn-ZOpzrgM” width=”600″ height=”350″]

In an effort to broaden the appeal of the Anser Forged, Ping re-engineered the irons for 2013. And they set the bar high, setting out to make “the ultimate forged iron.” Like the previous model, the new Anser Forged irons come with a steep price tag (expect to pay between $1300 and $1500 for a stock set). But if you can stomach the cost, you’ll have a set of irons that blend good looks and performance as well as any forged iron available.

Better looks and forgiveness?

The new Anser Forged are longer and more forgiving than the previous Anser Forged irons, especially in the long irons. Engineers made the soles of the long irons wider, which according to Ping senior design engineer Marty Jertson is the easiest way to make an iron fly higher.

But the added sole width came at a cost. Many good players hesitate to play an iron that has a visible sole at address. On the 2011 Ping Anser irons, golfers could only see the top line of the irons at address. But in the 2013 model, the sole is visible behind the top line on the 3 and 4 irons.

*2011 Anser Forged 3 Iron (Left) and the 2013 Anser Forged 3 Iron (right)


Engineers also added more offset to the long irons, another visual aspect that some good players can find unappealing. Offset is the space between the forward portion of the hosel and the front of the clubface. For many good golfers, offset can be a bad word. This is because the more offset a club has, the higher a shot will fly, which can cause problems for good golfers who like to hit low shots.

“The more offset you put on the club, the more the clubhead wants to catch up with the shaft,” Jertson said. “[During the downswing] the head is lagging behind the shaft, but right at impact the head kicks forward and starts to lead the shaft. The offset increases initial launch angle.”

The long irons just don’t have more offset, they also have larger heads to make them more forgiving. Good players might balk at the looks of the revamped 3 and 4 irons, but once they hit them their aesthetics will become less important. Players tempted to replace their long irons with hybrids likely won’t need to with 2013 Anser Forged. The 3 and 4 irons have the distance and forgiveness of many hybrids, but offer the trajectory control and soft feel of a forged iron.

The larger size of the 3 and 4 irons are a special case, however. Jertson and his team felt the extra bulk was worth the added performance. But the rest of the 2013 Anser Forged irons get progressively smaller and have less offset throughout the set. That’s because there are plenty of ways for engineers to add forgiveness without adding bulk.

Big forgiveness, small clubhead

Contrary to what many good golfers believe, thick toplines serve a purpose greater than adding visual confidence at address for less-skilled players. Just as heel-toe weighting adds forgiveness to shots hit on the heel and toe, weight above and below the sweetspot adds forgiveness to shots hit in those areas as well. That’s why Ping thickened the toplines of the Anser Forged irons. But unless you took a caliper and measured the toplines, you wouldn’t know they were any thicker. That’s because Ping engineers shaped the topline in such a way that they could hide mass underneath it. This makes the revamped irons more visually appealing to good players and adds better performance on mishits as well.

Jertson said that all Ping irons are designed to provide maximum forgiveness for their size. Like Ping’s most blade-like iron, the S56, engineers added tungsten weights and the strategically placed bars in the cavity of the irons that add forgiveness and tune the center of gravity. But because the 2013 Anser Forged Irons are larger than the S56 irons, they were able to add forgiveness on a larger scale.

*2011 Anser Forged 7 Iron (left) vs. 2013 Anser Forged 7 Iron (right)


Each of the 2013 Anser Forged irons have an enormous tungsten sole weight that moves the center of gravity lower and deeper for faster ball speeds. The bars in the cavity are also specialized for each iron — on the long irons, they are thinner and extend horizontally for a lower center of gravity. On the short irons, engineers made the bars thicker and more vertical. This makes them more forgiving on shots hit above and below the sweet spot and helps golfers flight the ball as well. All together, the sneaky thick toplines, tungsten soles and strategically placed bars add a huge amount of forgiveness, making the Anser Forged irons play much more forgiving than their sizes indicate.

Miguel Angel Jimenez became the first to win with the 2013 Anser Forged irons at the UBS Hong Kong Open in November 2012 and Hunter Mahan put the irons in his bag at the World Challenge two weeks later. Both players were previously playing the smaller, less-forgiving S56 irons. That’s a testament to how good these irons look, even to the discerning eye of a top tour pro.

Looks: The 3 and 4 irons are a bit on the chunky side, but the 5 iron though pitching wedge look like forged cavity back irons should. While the irons get smaller as they work down the set, they are all larger than blades. But they’re not too much bigger than the S56 and forged cavity back irons aimed at better players.

Playability and Performance: This is where the Anser Forged Irons shine. They’re not too much bigger than the top tier of players irons, but they are much more forgiving. The tungsten weighting and angled bars offer substantial forgiveness and fine-tuned trajectory throughout the set without added bulk.

Flight and distance: Long irons launch easy and won’t balloon for better players with the right shaft. The mid-and-short irons offer workability, and are able to be flighted when necessary. Distance won’t be a problem with these. No problems working the ball, either.

Feel: The irons are forged from 8620 carbon steel, but don’t feel as soft as other forgings because of their multi-material construction and their deeply milled cavities. It’s a “squish” feel at impact — an improvement over the clicky sound of most Ping irons, but definitely not the buttery feel that some forged irons produce.

Cost: The key to getting more forgiveness out of a small, forged clubhead like the new Anser Forged is the deep cavities in the back of the club. They give engineers the ability to redistribute weight in the most optimal places. It took multiple forging and milling steps to get the Anser Forged’s 8620 steel as thin as necessary in certain areas, which is why they’re so expensive.

Bottom Line: If you want one of the highest-quality, highest-performing forged irons on the planet, these irons are for you. If cost is an issue, consider Ping’s i20, which cost around $1000. They don’t feel as good or look as good as the Anser Forged irons, but they’re slightly more playable thanks to a little more offset and a larger blade size.

Click here for more discussion in the “Equipment” forum. 

Click here for more discussion in the “Equipment” forum. 

Your Reaction?
  • 88
  • LEGIT14
  • WOW14
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK4

19 Comments

19 Comments

  1. Mike

    Jul 6, 2015 at 9:20 pm

    I have a set of ping anser forged irons I bought last year.3 iron through pitching wedge.They have the KBS tour stiff shafts in them.I hit a bucket of balls with them.The 3 iron has never been hit.I bought them last yr.They are white dot which is an inch over regular.I paid 1400 for them.Hit me up if u want to know more
    I need to sell them

  2. carl

    Jul 1, 2013 at 1:28 am

    I bought a set of irons with GRAPHITE shafts. sorry I hate them, if you hit it flush you dont seem to even feel the ball at impact.!! but if you dont hit it flush it sounds and feels aweful.!! They dont seem to have the distance either..I remember now that was why i got rid of my old eye 2’s…short on length for the lofts…10 yds less than most other clubs I have tried. The callaway FTI irons seem to suit me better so I will go back to them..

  3. Chris

    May 2, 2013 at 7:25 pm

    After owning all Titleist for the last 9 nine years, I switched and bought the 2013 Anser irons. Price was not a deterrent, and the performance is amazing.

  4. Robert

    Mar 21, 2013 at 3:48 pm

    Just purchased a set of Anser irons. I’ve played the MP64 and they are a great set, but the long irons a difficult at best to hit. Pings are more forgiving and look great at address and the 4 iron really helps you get the ball in the air. They have a crisp feel to them and it’s easy to move the ball either direction. They have lots of bounce, so it would be easy to increase/decrease the loft and the forging lets you do that. That was the best part, you can take them to the range and really dail in your flight and then change the specs. Can’t do that with the I20 and they also have better feel than the I20 (Unless your’re a pro and have access to unlimited wets and the tour van!). I suppose if you play golf almost everyday, then maybe you can get into the MP64. Practice baby practice…you’ll need it!

  5. MattB

    Feb 11, 2013 at 12:59 pm

    Was reading another article by Rob Miller regarding the anser forged irons, that stated can be ordered with any shaft in ping wrx matrix at no additional cost. Had local pro try to order set with DG Tour issue S400 shafts and Ping wanted a $21 upcharge. Where did you guys get this information from???

    • Challenger

      Mar 3, 2013 at 1:47 am

      I’ve played a bunch of irons including forged offerings from Mizuno, Titleist and Callaway and in the end the Ping Anser was my choice. The best part is I made the right choice and I’m pretty darn happy that I did. Better distance, similar feel and way more forgiving. Looks great looking down at set up and the results are there.

    • MattB

      Mar 3, 2013 at 6:54 am

      UPDATE: The local ping sales rep agreed to supply the DGTI S400 shafts for no upcharge due to all the misinformation I recieved from website as well as Ping customer service.

  6. Tony Lopez

    Feb 8, 2013 at 1:58 pm

    After visiting several retailers hitting the demo 7 iron flush time and time again, cuts and draws as easy as pie, I found a primo set in San Diego a couple of weeks ago. Same trip I hooked up with matching 52 and 58 Anser wedges. The guys bent the lies to my specs no charge. After chopping it around all summer in the mid 80’s, I played these for 3 rounds so far and I am stoked to say, I am back shooting in the low 70’s!!
    Yeah, I like ’em!

  7. Alan

    Jan 7, 2013 at 6:05 pm

    Mine came today, customized from PING WRX. They look impressive and feel even more impressive given the extreme forgiveness. Who wouldn’t put in play the most forgiving, workable forging they could find? Having owned s56’s prior to these, there is no comparison. Sure, the long irons look a bit chunky. However, as most players irons see the longer clubs in the set with little or no bounce, these have as much as 4 degrees and feel remarkable at impact. Easy to launch. They carry long and high but without ballooning or excessive spin. With the correct shaft fitting (flex and kick point), it will be very difficult to ignore the unmatched performance characteristics of this club.

  8. Dominic Chong

    Jan 4, 2013 at 9:49 pm

    Looks like something I would want.
    A forged set from PING should be great.

  9. Leonard

    Dec 20, 2012 at 10:30 pm

    I like mine but admit I waited to find a “preowned” set at a more reasonable price. Got the matching Anser wedges as well.

  10. Lee

    Dec 20, 2012 at 4:41 am

    I’ve tried them and they are nice clubs I admit to being a Ping fan and game I20’s (which for me out perform the Ansers) however if I was going to go back to forged irons the price differential between the Ansers and superb Mizuno MP64’s means only one winner for me.

  11. lefty

    Dec 12, 2012 at 7:50 pm

    I have i20’s which I love but I do not like that weight piece in the back of the earlier Ansers as the i15’s and i10’s had. They will fall out after awhile which I don’t think Ping suspected. The new Anser has much cleaner lines, I could want that club.

  12. pablo

    Dec 11, 2012 at 4:04 pm

    I used ping zings until last year when i upgraded to bridgestone j40 forged, which are the best feeling clubs i’ve ever hit. my gap, sand, and lob wedges are copper ping IST though, as nothing feels as good as those!

  13. Leonard

    Dec 8, 2012 at 11:29 pm

    Cobra Amps more your style Nick? To each his own!

  14. Nick

    Dec 6, 2012 at 4:33 pm

    I’ve never liked the look of Ping irons. They have that 70 year old grandpa look to me.

    • wcmcca

      Jan 12, 2013 at 6:38 pm

      The 70 year old grandpa that takes your lunch money week after week you mean, right Nick?

    • Jack

      Mar 19, 2013 at 12:07 pm

      Except when I hit with them usually they are better shots than with my own set. Must be a sign… But I hate the hosel design on their regular irons

  15. Matthew

    Dec 3, 2012 at 10:54 pm

    I love how Ping tries to enter the “forged” market and still has a HUGE offset on everything.. from a “players” perspective- just looks like a hooker of a club… makes me sick.

Leave a Reply

Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Equipment

Coolest thing for sale in the GolfWRX Classifieds (4/18/24): TaylorMade BRNR mini driver head

Published

on

At GolfWRX, we are a community of like-minded individuals that all experience and express our enjoyment of the game in many ways.

It’s that sense of community that drives day-to-day interactions in the forums on topics that range from best driver to what marker you use to mark your ball. It even allows us to share another thing we all love – buying and selling equipment.

Currently, in our GolfWRX buy/sell/trade (BST) forum, there is a listing for a TaylorMade BRNR mini driver head

From the seller: (@lasallen): “For sale is a BRNR mini 11.5 deg head only in brand new condition.  $325 shipped.”

To check out the full listing in our BST forum, head through the link: TaylorMade BRNR mini driver head 

This is the most impressive current listing from the GolfWRX BST, and if you are curious about the rules to participate in the BST Forum you can check them out here: GolfWRX BST Rules

Your Reaction?
  • 0
  • LEGIT0
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

Equipment

Coolest thing for sale in the GolfWRX Classifieds (4/18/24): Ping PLD Limited Anser – 1988 Open Championship – #2 of only 88 Made

Published

on

At GolfWRX, we are a community of like-minded individuals that all experience and express our enjoyment of the game in many ways.

It’s that sense of community that drives day-to-day interactions in the forums on topics that range from best driver to what marker you use to mark your ball. It even allows us to share another thing we all love – buying and selling equipment.

Currently, in our GolfWRX buy/sell/trade (BST) forum, there is a listing for a Ping PLD Limited Anser – 1988 Open Championship – #2 of only 88 Made.

From the seller: (@DLong72): “Ping PLD Limited Anser – 1988 Open Championship – #2 of only 88 Made. ?: $1150. ?? 100% milled collectors item from the limited releases commemorating when Ping putters won every major in 1988 (88 putters made). This was the model Seve Ballesteros used to win the 1988 Open Championship. Condition is brand new, never gamed, everything is in the original packaging as it came. Putter features the iconic sound slot.

Specs/ Additional Details

-100% Milled, Aluminum/Bronze Alloy (310g)

-Original Anser Design

-PING PP58 Grip

-Putter is built to standard specs.”

To check out the full listing in our BST forum, head through the link: Ping PLD Limited Anser – 1988 Open Championship – #2 of only 88 Made

This is the most impressive current listing from the GolfWRX BST, and if you are curious about the rules to participate in the BST Forum you can check them out here: GolfWRX BST Rules

Your Reaction?
  • 1
  • LEGIT0
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

Equipment

Inside Collin Morikawa’s recent golf ball, driver, 3-wood, and “Proto” iron changes

Published

on

As you probably know by now, Collin Morikawa switched putters after the first round of The Masters, and he ultimately went on to finish T3.

The putter was far from the only change he made last week, however, and his bag is continuing to change this week at the 2024 RBC Heritage.

On the range of The Masters, Morikawa worked closely with Adrian Reitveld, TaylorMade’s Senior Manager of Tour at TaylorMade, to find the perfect driver and 3-wood setups.

Morikawa started off 2024 by switching into TaylorMade’s Qi10 Max driver, but since went back to his faithful TaylorMade SIM – yes, the original SIM from 2020. Somehow, some way, it seems Morikawa always ends up back in that driver, which he used to win the 2020 PGA Championship, and the 2021 Open Championship.

At The Masters, however, Rietveld said the duo found the driver head that allowed “zero compromise” on Morikawa’s preferred fade flight and spin. To match his preferences, they landed on a TaylorMade Qi10 LS 9-degree head, and the lie angle is a touch flatter than his former SIM.

“It’s faster than his gamer, and I think what we found is it fits his desired shot shape, with zero compromise” Rietveld told GolfWRX.com on Wednesday at the RBC Heritage.

Then, to replace his former SIM rocket 3-wood, Morikawa decided to switch into the TaylorMade Qi10 core model 13.5-degree rocket head, with an adjustable hosel.

“He likes the spin characteristics of that head,” Rietveld said. “Now he’s interesting because with Collin, you can turn up at a tournament, and you look at his 3-wood, and he’s changed the setting. One day there’s more loft on it, one day there’s less loft on it. He’s that type of guy. He’s not scared to use the adjustability of the club.

“And I think he felt our titanium head didn’t spin as low as his original SIM. So we did some work with the other head, just because he liked the feel of it. It was a little high launching, so we fit him into something with less loft. It’s a naughty little piece of equipment.” 

In addition to the driver and fairway wood changes, Morikawa also debuted his new “MySymbol” jersey No. 5 TP5x golf ball at The Masters. Morikawa’s choice of symbols is likely tied to his love of the Los Angeles Dodgers baseball team.

Not enough changes for you? There’s one more.

On Wednesday at the 2024 RBC Heritage, Morikawa was spotted with a new TaylorMade “Proto” 4-iron in the bag. If you recall, it’s the same model that Rory McIlroy debuted at the 2024 Valero Texas Open.

According to Morikawa, the new Proto 4-iron will replace his old P-770 hollow-bodied 4-iron.

“I used to hit my P-770 on a string, but sometimes the distance would be a little unpredictable,” Morikawa told GolfWRX.com. “This one launches a touch higher, and I feel I can predict the distance better. I know Rory replaced his P-760 with it. I’m liking it so far.” 

See Morikawa’s full WITB from the 2024 RBC Heritage here. 

Your Reaction?
  • 77
  • LEGIT8
  • WOW2
  • LOL6
  • IDHT2
  • FLOP4
  • OB3
  • SHANK6

Continue Reading

WITB

Facebook

Trending