Connect with us

Equipment

SPOTTED: Srixon “Z785” and “Z585” irons

Published

on

Photos have recently popped up in our GolfWRX Forums of Srixon “Z785” and “Z585” irons. It’s been nearly two years since the company released it’s previous Z565, Z765 and Z965 irons, so it’s possible (if not likely), based on nomenclature, these could be the replacements for that series.

The photos in our forums show Z785 short irons (5-PW) and Z785 long irons (4 and 3), but it does not appear that the Z785 irons shown in the photos are driving irons, so it’s likely these photos come from a mixed set.

We do not have any official tech or release information about new irons from Srixon at this time, so we’re left to speculate for the time being. What do you think about the photos of these Srixon “Z785” and “Z585” irons?

Check out the photos of each below, and click here for more photos and discussion.

Srixon “Z785” irons

 

Srixon “Z585” irons

Click here for more photos and discussion.

Your Reaction?
  • 233
  • LEGIT24
  • WOW25
  • LOL3
  • IDHT2
  • FLOP1
  • OB1
  • SHANK21

We share your golf passion. You can follow GolfWRX on Twitter @GolfWRX, Facebook and Instagram.

31 Comments

31 Comments

  1. John

    Jul 20, 2018 at 4:47 pm

    How about a lefty gap wedge this time?

  2. ray

    Jul 20, 2018 at 9:14 am

    Best looking 7 series yet. Hated the look of the last ones so much I got rid of them. Couldn’t get past the gray stripe and the muscle toward the toe look of the 765. This one has the muscle more centered looking and no dumb stripe YES!!!

  3. KT89

    Jul 19, 2018 at 11:43 pm

    ogo do you have anything positive to add to anything being said? Some great openings for some solid discussion here and you managed to trash or belittle everyone you’ve responded to. Are you playing on TV but we just don’t know it? No? Bring it down a few notches and humble yourself a bit.

    • Shinton

      Jul 20, 2018 at 9:46 am

      Oh don’t worry about Ogo, he’s just trying to flex his finger muscles on here(prolly can’t get it done on the course). He is obviously much superior than any one else willing to give an opinion. We should all kneel in honor and submit to his excellence!

    • BD

      Jul 20, 2018 at 10:33 am

      Ogo is just a troll. Whatever he says has no merit.

  4. ogo

    Jul 19, 2018 at 2:38 pm

    Are these Srixon Z’s fully hot forged like Mizunos…. or are they just cheap castings that are stamped or cold coin forged that only minutely changes the surface grain structure? Biiiig difference!!! 😮

    • Hintongolf

      Jul 19, 2018 at 4:50 pm

      I play the Z965s 3-pw and can tell you they feel every bit as good as the Mizuno irons, nothing cheap about Srixon irons.

      • ogo

        Jul 19, 2018 at 11:13 pm

        Your ‘feeeel’ is irrelevant to the issue of the clubhead construction. In all likelihood your ‘feeeel’ is faulty or non-existent and thus worthless opinion. Keep your subjective feeeel to yourself.

        • Harambe

          Jul 19, 2018 at 11:31 pm

          they are endo forged. these feel softer than mizuno. 1020 carbon steel vs 1025. endo and miura are the best foundries in the game

        • Funkaholic

          Jul 20, 2018 at 12:08 pm

          That is an arrogant and uninformed comment. Those of us who know what “feel” means in a quality forged iron, value the subtle differences in feel. Materials, forging process and design all come together to create an experience for the player.

  5. bonifacj

    Jul 19, 2018 at 1:00 pm

    I still bag the z745s. Best looking, feeling and performing irons I have ever used. Not sure how Srixon could top them.

  6. Jim McPherson

    Jul 19, 2018 at 11:10 am

    I like what Srixon has done with the more player irons in the 7 & 9 series. No cheap looking plastic bling badges! Keep up the good work. Keep the back of the club clean and only the steel. Badges? We don’t need no stinking badges!

    #noironbadges

    • rondon

      Jul 19, 2018 at 12:38 pm

      These thick-faced cavity back irons may appeal to pros and good ams, but the huge majority of rec’n golfers will be playing hollow irons within 5 years. Hollow is hotter off the face and higher trajectories. It’s over for solid irons.

      • Funkaholic

        Jul 20, 2018 at 12:17 pm

        You obviously don’t know what you are talking about.

  7. Chilly Dipper

    Jul 19, 2018 at 7:18 am

    LMK when you spot a left handed 985…

  8. Brad

    Jul 19, 2018 at 6:42 am

    I much prefer the cleaner look of the z765 and the z745 irons before them. Not really a fan of the stepped cavity look on the z785 or the bling bling badging in the cavity of the new z585’s.

    I’ve had my eye on a set of z765’s for while and I might just have to go buy a set before they are replaced with these…their uglier cousins.

  9. Tom

    Jul 19, 2018 at 12:55 am

    There hasn’t been anything new in irons since the Ping Eye II…..blades or perimeter weighted….manufacturers just keep changing the back cavities cosmetically….gotta introduce a new model every year…Re-grip your old irons, you will probably hit them just as well as any of these “new” models.

    • Dave

      Jul 19, 2018 at 9:35 am

      except for tungsten weighting in heel and toe, sole changes especially in these to help turf interaction, power holes in wilsons make toe shots exactly like pured shots, slots in taylormade improve forgiveness on thin shots, some cast irons feel exactly like forged, oh and many sets have improved distance dramatically. pxg,taylormade, ping have polymer filled cavitys which produce great distance for those that need it, other than that they are all just metal.

      • rondon

        Jul 19, 2018 at 12:34 pm

        Don’t forget the hollow irons like PXG and P790s that are proving superior to traditional cavity back clubs. It’s the thin face on the hollow irons that make them better than thick face cavity backs. Pros can play the blades but the rec’n golfer market is hollow irons.

    • Rob Pfeil

      Jul 19, 2018 at 3:03 pm

      Except that Ping says the iBlades have a higher MOI than the Ping Eye 2’s. So those old irons aren’t as good as you think.

      • ogo

        Jul 19, 2018 at 11:21 pm

        A higher MOI means more inertia built into the clubhead… and that makes them harder to supinate through impact. Unless you desperately need more MOI in the head to compensate for your horrid off-center hits? The iBlades are admission of incompetence.

    • Herbert

      Jul 20, 2018 at 6:48 pm

      So True.

  10. rondon

    Jul 19, 2018 at 12:29 am

    Are these irons hollow? If they aren’t hollow they are an obsolete design.

    • carl

      Jul 19, 2018 at 10:00 am

      man, not sure what these companies are doing still creating all these obsolete designs. And whats with all those pga tour players that have obsolete designed blades in the bag

      • rondon

        Jul 19, 2018 at 12:30 pm

        With the hollow iron designs like PXG and P790s all the old designs will fade away because only pros can play true blades. The club companies will force the pros to play the hollow clubs if they want to get paid. It’s all about selling clubs to rec golfers.

    • Hintongolf

      Jul 19, 2018 at 10:09 am

      hahahahaha this is too funny, “if they aren’t hollow they are an obsolete design.” The Z785 aren’t designed for the golfer with an ego who plays from the wrong tees and in turn needs clubs to hit the ball further and straighter for them. These are designed with the lower handicap golfer in mind, those who are looking for better ball control and shot shape with a little help on slight mishits.

      • rondon

        Jul 19, 2018 at 12:27 pm

        OK…. if that’s the case then Srixon can expect to sell a thousand sets only because good amateurs and rec golfers will be playing PXG and P790s…. hollow clubs.

    • Funkaholic

      Jul 20, 2018 at 12:15 pm

      What is your obsession with hollow irons? Are you one of those PXG fanboys (the most overpriced, overrated clubs on the market)? I will always prefer a forged cavity or muscle back blade over any hollow iron.

  11. Travis

    Jul 19, 2018 at 12:05 am

    I like what I see so far!

Leave a Reply

Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Whats in the Bag

Steve Stricker WITB 2024 (April)

Published

on

Driver: Titleist TSR3 (9 degrees, C4 SureFit setting)
Shaft: Fujikura Motore Speeder VC 7.2 X

3-wood: Titleist 915F (13.5 degrees)
Shaft: Mitsubishi Tensei CK Pro White 80 TX

Hybrid: Titleist 816 H1 (17 degrees)
Shaft: Fujikura Motore Speeder VC 9.2 X

Irons: Titleist T100 (3-9)
Shafts: Project X 6.5

Wedges: Titleist Vokey SM8 (46-10F @55), Titleist Vokey SM10 (54-10S @53), Titleist Vokey SM4 (60 @59)
Shafts: True Temper Dynamic Gold X100 w/Sensicore

Putter: Odyssey White Hot No. 2

Ball: Titleist Pro V1x

Grips: Golf Pride Tour Velvet Grip Rite

Check out more in-hand photos of Steve Stricker’s clubs here.

Your Reaction?
  • 0
  • LEGIT0
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

Whats in the Bag

Alex Fitzpatrick WITB 2024 (April)

Published

on

  • Alex Fitzpatrick what’s in the bag accurate as of the Zurich Classic. 

Driver: Ping G430 LST (10.5 degrees)
Shaft: Fujikura Ventus Black 6 X

3-wood: TaylorMade Qi10 (15 degrees)
Shaft: Fujikura Ventus TR Black 7 X

Hybrid: Ping G430 (19 degrees)
Shaft: Fujikura Ventus Black HB 10 TX

Irons: Ping iCrossover (2), Titleist T100 (4-PW)
Shafts: Fujikura Ventus Black HB 9 TX (2), Nippon N.S. Pro Modus 3 Tour 120 X (4-9)

Wedges: Titleist Vokey Design SM10 (50-12F, 56-12D, 60-08M)
Shafts: Nippon N.S. Pro Modus 3 Tour 120 X

Putter: Bettinardi SS16 Dass

Grips: Golf Pride MCC

Check out more in-hand photos of Alex Fitzpatrick’s clubs here.

Your Reaction?
  • 0
  • LEGIT0
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

Equipment

What’s the perfect mini-driver/shaft combo? – GolfWRXers discuss

Published

on

In our forums, our members have been discussing Mini-Drivers and accompanying shafts. WRXer ‘JamesFisher1990’ is about to purchase a BRNR Mini and is torn on what shaft weight to use, and our members have been sharing their thoughts and set ups in our forum.

Here are a few posts from the thread, but make sure to check out the entire discussion and have your say at the link below.

  • PARETO: “New BRNR at 13.5. Took it over to TXG (Club Champ but TXG will always rule) in Calgary for a fit. Took the head down to 12, stuck in a Graphite Design AD at 3 wood length and 60g. Presto- numbers that rivaled my G430Max but with waaaaay tighter dispersion. Win.”
  • driveandputtmachine: “Still playing a MIni 300.  The head was only 208, so I ordered a heavier weight and play it at 3 wood length.  I am playing a Ventus Red 70.   I play 70 grams in my fairways.  I use it mainly to hit draws off the tee.  When I combine me, a driver, and trying to hit a draw it does not work out well most of the time.  So the MIni is for that. As an aside, I have not hit the newest BRNR, but the previous model wasn’t great off the deck.  The 300 Mini is very good off the deck.”
  • JAM01: “Ok, just put the BRNR in the bag along side a QI10 max and a QI10 3 wood. A load of top end redundancy. But, I have several holes at my two home courses where the flight and accuracy of the mini driver helps immensely. Mine is stock Proforce 65 at 13.5, I could see a heavier shaft, but to normal flex, as a nice alternative.”

Entire Thread: “What’s the perfect Mini-Driver/Shaft combo? – GolfWRXers discuss”

Your Reaction?
  • 3
  • LEGIT0
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

WITB

Facebook

Trending