Connect with us

Equipment

SPOTTED: Srixon “Z785” and “Z585” irons

Published

on

Photos have recently popped up in our GolfWRX Forums of Srixon “Z785” and “Z585” irons. It’s been nearly two years since the company released it’s previous Z565, Z765 and Z965 irons, so it’s possible (if not likely), based on nomenclature, these could be the replacements for that series.

The photos in our forums show Z785 short irons (5-PW) and Z785 long irons (4 and 3), but it does not appear that the Z785 irons shown in the photos are driving irons, so it’s likely these photos come from a mixed set.

We do not have any official tech or release information about new irons from Srixon at this time, so we’re left to speculate for the time being. What do you think about the photos of these Srixon “Z785” and “Z585” irons?

Check out the photos of each below, and click here for more photos and discussion.

Srixon “Z785” irons

 

Srixon “Z585” irons

Click here for more photos and discussion.

Your Reaction?
  • 233
  • LEGIT24
  • WOW25
  • LOL3
  • IDHT2
  • FLOP1
  • OB1
  • SHANK21

We share your golf passion. You can follow GolfWRX on Twitter @GolfWRX, Facebook and Instagram.

31 Comments

31 Comments

  1. John

    Jul 20, 2018 at 4:47 pm

    How about a lefty gap wedge this time?

  2. ray

    Jul 20, 2018 at 9:14 am

    Best looking 7 series yet. Hated the look of the last ones so much I got rid of them. Couldn’t get past the gray stripe and the muscle toward the toe look of the 765. This one has the muscle more centered looking and no dumb stripe YES!!!

  3. KT89

    Jul 19, 2018 at 11:43 pm

    ogo do you have anything positive to add to anything being said? Some great openings for some solid discussion here and you managed to trash or belittle everyone you’ve responded to. Are you playing on TV but we just don’t know it? No? Bring it down a few notches and humble yourself a bit.

    • Shinton

      Jul 20, 2018 at 9:46 am

      Oh don’t worry about Ogo, he’s just trying to flex his finger muscles on here(prolly can’t get it done on the course). He is obviously much superior than any one else willing to give an opinion. We should all kneel in honor and submit to his excellence!

    • BD

      Jul 20, 2018 at 10:33 am

      Ogo is just a troll. Whatever he says has no merit.

  4. ogo

    Jul 19, 2018 at 2:38 pm

    Are these Srixon Z’s fully hot forged like Mizunos…. or are they just cheap castings that are stamped or cold coin forged that only minutely changes the surface grain structure? Biiiig difference!!! 😮

    • Hintongolf

      Jul 19, 2018 at 4:50 pm

      I play the Z965s 3-pw and can tell you they feel every bit as good as the Mizuno irons, nothing cheap about Srixon irons.

      • ogo

        Jul 19, 2018 at 11:13 pm

        Your ‘feeeel’ is irrelevant to the issue of the clubhead construction. In all likelihood your ‘feeeel’ is faulty or non-existent and thus worthless opinion. Keep your subjective feeeel to yourself.

        • Harambe

          Jul 19, 2018 at 11:31 pm

          they are endo forged. these feel softer than mizuno. 1020 carbon steel vs 1025. endo and miura are the best foundries in the game

        • Funkaholic

          Jul 20, 2018 at 12:08 pm

          That is an arrogant and uninformed comment. Those of us who know what “feel” means in a quality forged iron, value the subtle differences in feel. Materials, forging process and design all come together to create an experience for the player.

  5. bonifacj

    Jul 19, 2018 at 1:00 pm

    I still bag the z745s. Best looking, feeling and performing irons I have ever used. Not sure how Srixon could top them.

  6. Jim McPherson

    Jul 19, 2018 at 11:10 am

    I like what Srixon has done with the more player irons in the 7 & 9 series. No cheap looking plastic bling badges! Keep up the good work. Keep the back of the club clean and only the steel. Badges? We don’t need no stinking badges!

    #noironbadges

    • rondon

      Jul 19, 2018 at 12:38 pm

      These thick-faced cavity back irons may appeal to pros and good ams, but the huge majority of rec’n golfers will be playing hollow irons within 5 years. Hollow is hotter off the face and higher trajectories. It’s over for solid irons.

      • Funkaholic

        Jul 20, 2018 at 12:17 pm

        You obviously don’t know what you are talking about.

  7. Chilly Dipper

    Jul 19, 2018 at 7:18 am

    LMK when you spot a left handed 985…

  8. Brad

    Jul 19, 2018 at 6:42 am

    I much prefer the cleaner look of the z765 and the z745 irons before them. Not really a fan of the stepped cavity look on the z785 or the bling bling badging in the cavity of the new z585’s.

    I’ve had my eye on a set of z765’s for while and I might just have to go buy a set before they are replaced with these…their uglier cousins.

  9. Tom

    Jul 19, 2018 at 12:55 am

    There hasn’t been anything new in irons since the Ping Eye II…..blades or perimeter weighted….manufacturers just keep changing the back cavities cosmetically….gotta introduce a new model every year…Re-grip your old irons, you will probably hit them just as well as any of these “new” models.

    • Dave

      Jul 19, 2018 at 9:35 am

      except for tungsten weighting in heel and toe, sole changes especially in these to help turf interaction, power holes in wilsons make toe shots exactly like pured shots, slots in taylormade improve forgiveness on thin shots, some cast irons feel exactly like forged, oh and many sets have improved distance dramatically. pxg,taylormade, ping have polymer filled cavitys which produce great distance for those that need it, other than that they are all just metal.

      • rondon

        Jul 19, 2018 at 12:34 pm

        Don’t forget the hollow irons like PXG and P790s that are proving superior to traditional cavity back clubs. It’s the thin face on the hollow irons that make them better than thick face cavity backs. Pros can play the blades but the rec’n golfer market is hollow irons.

    • Rob Pfeil

      Jul 19, 2018 at 3:03 pm

      Except that Ping says the iBlades have a higher MOI than the Ping Eye 2’s. So those old irons aren’t as good as you think.

      • ogo

        Jul 19, 2018 at 11:21 pm

        A higher MOI means more inertia built into the clubhead… and that makes them harder to supinate through impact. Unless you desperately need more MOI in the head to compensate for your horrid off-center hits? The iBlades are admission of incompetence.

    • Herbert

      Jul 20, 2018 at 6:48 pm

      So True.

  10. rondon

    Jul 19, 2018 at 12:29 am

    Are these irons hollow? If they aren’t hollow they are an obsolete design.

    • carl

      Jul 19, 2018 at 10:00 am

      man, not sure what these companies are doing still creating all these obsolete designs. And whats with all those pga tour players that have obsolete designed blades in the bag

      • rondon

        Jul 19, 2018 at 12:30 pm

        With the hollow iron designs like PXG and P790s all the old designs will fade away because only pros can play true blades. The club companies will force the pros to play the hollow clubs if they want to get paid. It’s all about selling clubs to rec golfers.

    • Hintongolf

      Jul 19, 2018 at 10:09 am

      hahahahaha this is too funny, “if they aren’t hollow they are an obsolete design.” The Z785 aren’t designed for the golfer with an ego who plays from the wrong tees and in turn needs clubs to hit the ball further and straighter for them. These are designed with the lower handicap golfer in mind, those who are looking for better ball control and shot shape with a little help on slight mishits.

      • rondon

        Jul 19, 2018 at 12:27 pm

        OK…. if that’s the case then Srixon can expect to sell a thousand sets only because good amateurs and rec golfers will be playing PXG and P790s…. hollow clubs.

    • Funkaholic

      Jul 20, 2018 at 12:15 pm

      What is your obsession with hollow irons? Are you one of those PXG fanboys (the most overpriced, overrated clubs on the market)? I will always prefer a forged cavity or muscle back blade over any hollow iron.

  11. Travis

    Jul 19, 2018 at 12:05 am

    I like what I see so far!

Leave a Reply

Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Whats in the Bag

Chesson Hadley WITB 2024 (March)

Published

on

Driver: Titleist TSR3 (10 degrees, D1 SureFit setting)
Shaft: Mitsubishi Diamana D+ 70 TX

3-wood: Titleist TSR2+ (14.5 degrees, A1 SureFit setting)
Shaft: Mitsubishi Diamana D+ 80 TX

Irons: Titleist T200 (3), Titleist 620 CB (4, 5), Titleist 620 MB (6-PW)
Shafts: Graphite Design Tour AD DI 105 X (3), True Temper Dynamic Gold Tour Issue X100 (4-PW)

Wedges: Titleist Vokey Design SM10 (52-12F, 56-14F), WedgeWorks (60-K)
Shafts: True Temper Dynamic Gold Tour Issue S400

Putter: Odyssey White Hot OG 2-Ball
Grip: Odyssey

Grips: Golf Pride Tour Velvet

Ball: Titleist Pro V1x

Check out more in-hand photos Chesson Hadley’s clubs here.

Your Reaction?
  • 0
  • LEGIT0
  • WOW0
  • LOL1
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

Whats in the Bag

Gary Woodland WITB 2024 (March)

Published

on

Driver: Cobra Darkspeed X (8 degrees)
Shaft: Accra TZ5 70 M5

  • The white circle that appears at the top of the face a removable sticker that’s used for launch monitor tracking, and Woodland removes it for competition!

3-wood: Cobra Darkspeed X (14 degrees)
Shaft: Accra TZ5 GW100 Prototype

7-wood: Cobra LTDx LS prototype (20 degrees)
Shaft: Accra TZ5 GW100 Prototype

Irons: Wilson Staff (18 degrees), Cobra King MB (4-PW)
Shafts: KBS Tour C-Taper Limited X

Wedges: Cobra SB (48), Titleist Vokey Design SM10 (52-08F, 56-14F), Cobra King (60)
Shafts: KBS Tour C-Taper Limited X (48 degrees), KBS Tour V-Ten 125

Putter: Scotty Cameron T-5 Proto
Grip: SuperStroke Zenergy Tour 3.0P

Ball: Titleist Pro V1x

Grips: Golf Pride Tour Velvet Cord

See more in-hand photos of Gary Woodland’s WITB in the forums.

Your Reaction?
  • 4
  • LEGIT1
  • WOW2
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

Equipment

Q&A: Martin Trainer on his Bobby Grace “Greg Chalmers” putter, 6.5-degree driver, and “butter knife” 2-iron

Published

on

As unbiasedly as I can put it, Martin Trainer has one of the coolest club setups in professional golf. (At some point soon, I’ll put together a top-10 list of “coolest club setups on Tour,” but I know that Trainer will be in the top-10)

What a lineup. He plays a 6.5-degree Wilson prototype driver, a 13-degree Wilson prototype 3-wood, a true blade Wilson Staff Model 2-iron, and a Bobby Grace “Greg Chalmers Commemorative” putter!

 

View this post on Instagram

 

A post shared by GolfWRX (@golfwrx)

I mean, look at this 2-iron from address…

To quote the great author R.L. Stine: “Goosebumps.”

On Wednesday at the 2024 Texas Children’s Houston Open, I caught up with Trainer to learn more about his bag setup.

Here’s what he had to say:

You have the Internet going crazy over your bag setup, and your putter. Where’d you pick the Bobby Grace-Greg Chalmers putter up? How long have you had it?

MT: This was from when Bobby Grace came to my course in California: Cal Club. And for whatever reason, they just started having them in the shop. So then I took my buddy’s, started using it, and made, like, a million putts in a row, which is how every putter story begins, I guess.

And then, I bought a couple of my own, used it for years, got to the Tour with it, won on Tour with it (the 2019 Puerto Rico Open). Then, about a year later, started using another putter, did that for a couple years, but now it’s back in the bag.

When did it come back in the bag?

MT: December of this past year. So a few months ago.

What year would you say was the first time you threw that in the bag, or, like, when you bought it?

MT: God…Probably, 2016, maybe? 2018?

Do you remember how much you paid for it?

MT: I don’t know, actually. Maybe $100-150 bucks or something. I think that’s the only golf club I’ve bought between high school and now. Well, two, since I bought two of them.

The driver is interesting, too. What went into the prototyping process?

MT: That was a version of the current driver, but it was the prototype that they first came out with for Tour guys to try. And for whatever reason, I just never switched out to the new one.

It’s just 6.5 degrees, right?

MT: Yeah. Very low loft, yeah.

What kind of ball speed do you have with that these days?

MT: Like high 170’s.

Yeah, that’ll work. And then a 2-iron blade? We’re seeing fewer and fewer of those out here.

MT: Yeah. The butter knife.

Very cool thing to have in the bag. Have you done any testing with driving irons? 

MT: Yeah, I used to have a thicker one, but it was a little offset, and I never hit it that well. And then finally, I started messing around with the butter knife. And I remember the first time I looked down at it, I was terrified. And then I ended up getting used to it, putting it in play, and it’s been in place since. It’s a pretty good club for me.

How far do you carry that? 

MT: Like 235.

A good little wind club, I’m sure.

MTL Yeah, exactly. I can hit it very low. It’s great.

I love it. You have people shook looking at that. Thanks for the time, man. 

MT: Absolutely.

To see more photos and discussion of Trainer’s bag, click here.

Your Reaction?
  • 28
  • LEGIT4
  • WOW1
  • LOL1
  • IDHT0
  • FLOP0
  • OB1
  • SHANK0

Continue Reading

WITB

Facebook

Trending