Connect with us

Equipment

SPOTTED: Srixon “Z785” and “Z585” irons

Published

on

Photos have recently popped up in our GolfWRX Forums of Srixon “Z785” and “Z585” irons. It’s been nearly two years since the company released it’s previous Z565, Z765 and Z965 irons, so it’s possible (if not likely), based on nomenclature, these could be the replacements for that series.

The photos in our forums show Z785 short irons (5-PW) and Z785 long irons (4 and 3), but it does not appear that the Z785 irons shown in the photos are driving irons, so it’s likely these photos come from a mixed set.

We do not have any official tech or release information about new irons from Srixon at this time, so we’re left to speculate for the time being. What do you think about the photos of these Srixon “Z785” and “Z585” irons?

Check out the photos of each below, and click here for more photos and discussion.

Srixon “Z785” irons

 

Srixon “Z585” irons

Click here for more photos and discussion.

Your Reaction?
  • 233
  • LEGIT24
  • WOW25
  • LOL3
  • IDHT2
  • FLOP1
  • OB1
  • SHANK21

We share your golf passion. You can follow GolfWRX on Twitter @GolfWRX, Facebook and Instagram.

31 Comments

31 Comments

  1. John

    Jul 20, 2018 at 4:47 pm

    How about a lefty gap wedge this time?

  2. ray

    Jul 20, 2018 at 9:14 am

    Best looking 7 series yet. Hated the look of the last ones so much I got rid of them. Couldn’t get past the gray stripe and the muscle toward the toe look of the 765. This one has the muscle more centered looking and no dumb stripe YES!!!

  3. KT89

    Jul 19, 2018 at 11:43 pm

    ogo do you have anything positive to add to anything being said? Some great openings for some solid discussion here and you managed to trash or belittle everyone you’ve responded to. Are you playing on TV but we just don’t know it? No? Bring it down a few notches and humble yourself a bit.

    • Shinton

      Jul 20, 2018 at 9:46 am

      Oh don’t worry about Ogo, he’s just trying to flex his finger muscles on here(prolly can’t get it done on the course). He is obviously much superior than any one else willing to give an opinion. We should all kneel in honor and submit to his excellence!

    • BD

      Jul 20, 2018 at 10:33 am

      Ogo is just a troll. Whatever he says has no merit.

  4. ogo

    Jul 19, 2018 at 2:38 pm

    Are these Srixon Z’s fully hot forged like Mizunos…. or are they just cheap castings that are stamped or cold coin forged that only minutely changes the surface grain structure? Biiiig difference!!! 😮

    • Hintongolf

      Jul 19, 2018 at 4:50 pm

      I play the Z965s 3-pw and can tell you they feel every bit as good as the Mizuno irons, nothing cheap about Srixon irons.

      • ogo

        Jul 19, 2018 at 11:13 pm

        Your ‘feeeel’ is irrelevant to the issue of the clubhead construction. In all likelihood your ‘feeeel’ is faulty or non-existent and thus worthless opinion. Keep your subjective feeeel to yourself.

        • Harambe

          Jul 19, 2018 at 11:31 pm

          they are endo forged. these feel softer than mizuno. 1020 carbon steel vs 1025. endo and miura are the best foundries in the game

        • Funkaholic

          Jul 20, 2018 at 12:08 pm

          That is an arrogant and uninformed comment. Those of us who know what “feel” means in a quality forged iron, value the subtle differences in feel. Materials, forging process and design all come together to create an experience for the player.

  5. bonifacj

    Jul 19, 2018 at 1:00 pm

    I still bag the z745s. Best looking, feeling and performing irons I have ever used. Not sure how Srixon could top them.

  6. Jim McPherson

    Jul 19, 2018 at 11:10 am

    I like what Srixon has done with the more player irons in the 7 & 9 series. No cheap looking plastic bling badges! Keep up the good work. Keep the back of the club clean and only the steel. Badges? We don’t need no stinking badges!

    #noironbadges

    • rondon

      Jul 19, 2018 at 12:38 pm

      These thick-faced cavity back irons may appeal to pros and good ams, but the huge majority of rec’n golfers will be playing hollow irons within 5 years. Hollow is hotter off the face and higher trajectories. It’s over for solid irons.

      • Funkaholic

        Jul 20, 2018 at 12:17 pm

        You obviously don’t know what you are talking about.

  7. Chilly Dipper

    Jul 19, 2018 at 7:18 am

    LMK when you spot a left handed 985…

  8. Brad

    Jul 19, 2018 at 6:42 am

    I much prefer the cleaner look of the z765 and the z745 irons before them. Not really a fan of the stepped cavity look on the z785 or the bling bling badging in the cavity of the new z585’s.

    I’ve had my eye on a set of z765’s for while and I might just have to go buy a set before they are replaced with these…their uglier cousins.

  9. Tom

    Jul 19, 2018 at 12:55 am

    There hasn’t been anything new in irons since the Ping Eye II…..blades or perimeter weighted….manufacturers just keep changing the back cavities cosmetically….gotta introduce a new model every year…Re-grip your old irons, you will probably hit them just as well as any of these “new” models.

    • Dave

      Jul 19, 2018 at 9:35 am

      except for tungsten weighting in heel and toe, sole changes especially in these to help turf interaction, power holes in wilsons make toe shots exactly like pured shots, slots in taylormade improve forgiveness on thin shots, some cast irons feel exactly like forged, oh and many sets have improved distance dramatically. pxg,taylormade, ping have polymer filled cavitys which produce great distance for those that need it, other than that they are all just metal.

      • rondon

        Jul 19, 2018 at 12:34 pm

        Don’t forget the hollow irons like PXG and P790s that are proving superior to traditional cavity back clubs. It’s the thin face on the hollow irons that make them better than thick face cavity backs. Pros can play the blades but the rec’n golfer market is hollow irons.

    • Rob Pfeil

      Jul 19, 2018 at 3:03 pm

      Except that Ping says the iBlades have a higher MOI than the Ping Eye 2’s. So those old irons aren’t as good as you think.

      • ogo

        Jul 19, 2018 at 11:21 pm

        A higher MOI means more inertia built into the clubhead… and that makes them harder to supinate through impact. Unless you desperately need more MOI in the head to compensate for your horrid off-center hits? The iBlades are admission of incompetence.

    • Herbert

      Jul 20, 2018 at 6:48 pm

      So True.

  10. rondon

    Jul 19, 2018 at 12:29 am

    Are these irons hollow? If they aren’t hollow they are an obsolete design.

    • carl

      Jul 19, 2018 at 10:00 am

      man, not sure what these companies are doing still creating all these obsolete designs. And whats with all those pga tour players that have obsolete designed blades in the bag

      • rondon

        Jul 19, 2018 at 12:30 pm

        With the hollow iron designs like PXG and P790s all the old designs will fade away because only pros can play true blades. The club companies will force the pros to play the hollow clubs if they want to get paid. It’s all about selling clubs to rec golfers.

    • Hintongolf

      Jul 19, 2018 at 10:09 am

      hahahahaha this is too funny, “if they aren’t hollow they are an obsolete design.” The Z785 aren’t designed for the golfer with an ego who plays from the wrong tees and in turn needs clubs to hit the ball further and straighter for them. These are designed with the lower handicap golfer in mind, those who are looking for better ball control and shot shape with a little help on slight mishits.

      • rondon

        Jul 19, 2018 at 12:27 pm

        OK…. if that’s the case then Srixon can expect to sell a thousand sets only because good amateurs and rec golfers will be playing PXG and P790s…. hollow clubs.

    • Funkaholic

      Jul 20, 2018 at 12:15 pm

      What is your obsession with hollow irons? Are you one of those PXG fanboys (the most overpriced, overrated clubs on the market)? I will always prefer a forged cavity or muscle back blade over any hollow iron.

  11. Travis

    Jul 19, 2018 at 12:05 am

    I like what I see so far!

Leave a Reply

Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Equipment

Why Rory McIlroy will likely use the new TaylorMade BRNR Mini Driver Copper at the RBC Heritage

Published

on

Although we spotted Rory McIlroy testing the new TaylorMade BRNR Mini Driver Copper last week during practice rounds at the Masters, he ultimately didn’t decide to use the club in competition.

It seems that will change this week at the 2024 RBC Heritage, played at the short-and-tight Harbour Town Golf Links in Hilton Head.

When asked on Wednesday following his morning Pro-Am if he’d be using the new, nostalgic BRNR Copper this week, McIlroy said, “I think so.”

“I like it,” McIlroy told GolfWRX.com on Tuesday regarding the BRNR. “This would be a good week for it.”

 

View this post on Instagram

 

A post shared by GolfWRX (@golfwrx)

According to Adrian Rietveld, the Senior Manager of Tour at TaylorMade, the BRNR Mini Driver can help McIlroy position himself properly off the tee at the tight layout.

Here’s what Rietveld told GolfWRX.com on Wednesday:

“For someone like Rory, who’s that long at the top end of the bag, and then you put him on a course like Harbour Town, it’s tough off the tee. It’s tight into the greens, and you have to put yourself in position off the tee to have a shot into the green. It kind of reminds me of Valderrama in Spain, where you can be in the fairway and have no shot into the green.

“I’m caddying for Tommy [Fleetwood] this week, so I was walking the course last night and looking at a few things. There’s just such a small margin for error. You can be standing in the fairway at 300 yards and have a shot, but at 320 you don’t. So if you don’t hit a perfect shot, you could be stuck behind a tree. And then if you’re back at 280, it might be a really tough shot into the small greens.

“So for Rory [with the BRNR], it’s a nice course-specific golf club for him. He’s got both shots with it; he can move it right-to-left or left-to-right. And the main thing about this club has been the accuracy and the dispersion with it. I mean, it’s been amazing for Tommy.

“This was the first event Tommy used a BRNR last year, and I remember talking to him about it, and he said he couldn’t wait to play it at Augusta next year. And he just never took it out of the bag because he’s so comfortable with it, and hitting it off the deck.

“So you look at Rory, and you want to have the tools working to your advantage out here, and the driver could hand-cuff him a bit with all of the shots you’d have to manufacture.”

So, although McIlroy might not be making a permanent switch into the new TaylorMade BRNR Mini Driver Copper, he’s likely to switch into it this week.

His version is lofted at 13.5 degrees, and equipped with a Fujikura Ventus Black 7X shaft.

See more photos of Rory testing the BRNR Mini here

Your Reaction?
  • 19
  • LEGIT1
  • WOW0
  • LOL1
  • IDHT0
  • FLOP0
  • OB1
  • SHANK3

Continue Reading

Equipment

Spotted: TaylorMade P-UDI driving iron

Published

on

It seems like the RBC Heritage is full of new gear to be spotted, and you can add TaylorMade’s P-UDI utility irons to that list.

We spotted a 17-degree P-UDI 2-iron in Nick Dunlap’s bag yesterday, and now have some photos of both the 3- and 4-irons. Nick has his P-UDI 2-iron setup with a Project X HZRDUS Black 4th Gen 105g TX shaft.

From what we can tell, this new P-UDI utility iron looks to have some of the usual TaylorMade technology as we can see the Speed Slot on the sole of the club for additional face flexibility. A toe screw is usually used to close off the hollow body design that will probably be filled with a version of TaylorMade’s Speed Foam that is present in the current iron lineup. This hollow body, foam-filled design should offer additional ball speed, soft feel, and sound, as well as an optimized CG for ball flight.

“Forged” is etched into the hosel, so we can assume that either the face, body, or both are forged for a soft and responsive feel. The club looks good from behind and at address, where we can see just a little offset and a topline that I would consider medium thickness. We don’t have the full details on what is under the hood or how many loft options will be available yet.

TaylorMade P-UDI 3-iron – 20°

TaylorMade P-UDI 4-iron – 22°

Your Reaction?
  • 12
  • LEGIT1
  • WOW3
  • LOL0
  • IDHT0
  • FLOP1
  • OB0
  • SHANK1

Continue Reading

Whats in the Bag

Collin Morikawa WITB 2024 (April)

Published

on

Driver: TaylorMade Qi10 LS (9 degrees)
Shaft: Mitsubishi Diamana D+ Limited 60 TX (45 inches)

3-wood: TaylorMade Qi10 (13.5 degrees)
Shaft: Mitsubishi Diamana D+ Limited 80 TX

5-wood: TaylorMade Qi10 (18 degrees)
Shaft: Mitsubishi Diamana D+ Limited 80 TX

Irons: TaylorMade P770 (4), P7MC (5-6), P730 (7-PW)
Shafts: True Temper Dynamic Gold Tour Issue Mid 115 X100 (4-6), True Temper Dynamic Gold Tour Issue X100 (7-PW)

Wedges: TaylorMade MG4 (50-SB09, 56-LB08), TaylorMade MG4 TW (60-TW11)
Shafts: True Temper Dynamic Gold Tour Issue S400

Putter: TaylorMade TP Soto
Grip: SuperStroke Zenergy Tour 2.0

Grips: Golf Pride Z-Grip Cord

Ball: TaylorMade TP5x

Your Reaction?
  • 5
  • LEGIT0
  • WOW1
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK1

Continue Reading

WITB

Facebook

Trending