Connect with us

Equipment

Ping launches new G400 Max driver, the “most forgiving driver in golf”

Published

on

As initially expected, the Ping G400 Max driver that officially launched today is made for more forgiveness, with a larger construction than it’s original G400 family members. In 2017, Ping launched its G400 driver line that included a standard model, a draw-biased SF Tec and a fade-biased LS Tec, each of which measured 445cc — below the 460cc legal limit of the USGA. Despite the smaller sizes, which helped reduce drag for more club head speed, they were actually more forgiving than their G-family predecessors due to aerodynamic improvements, thinner crowns, strategically-placed Tungsten weights and a new TS9+ titanium face.

Now, Ping’s new G400 Max driver has even more forgiveness than the already super-forgiving G400 drivers due to its larger size and additional weight in the rear of the golf club. Like the original G400 drivers, the G400 Max has a rear tungsten weight, except it’s even farther back and actually wraps around the sole of the G400 Max. The design means CG (center of gravity) is extremely low and rearward in the club head, and MOI (moment of inertia, a measure of forgiveness) is the highest reported on the market… or in other words, according to Ping, it’s the most forgiving driver out.

“Our engineers focused on increasing the forgiveness of the driver while maintaining the distance gains and powerful sound of the original G400 driver,” said John Solheim, the president of Ping. “It’s remarkable how long and straight the G400 Max flies. The forgiveness is off the charts and leads to tighter dispersion, which reveals just how consistent your distance and accuracy results will be on the golf course. We encourage all golfers to get fit and look closely at their dispersion, not just their one best shot on a launch monitor.”

When you hear about max forgiveness, you typically assume it’s a game-improvement driver that’s made for high-handicappers, right? While this driver will help recreational golfers who need help on off-center hits, the G400 Max driver is already in the bags of Ping staffers Aaron Baddeley and Seamus Power, and non-staffer Tony Finau, one of the longest drivers on the PGA Tour. According to Ping, despite having a larger size than the original G400 drivers, the G400 Max is still able to produce speed because of its forged, heat-treated T9S+ face that has a “thinner, hotter” impact area that raises ball speed.

Like the G400 drivers, the G400 Max comes stock with an Alta CB (counterbalanced) shaft that uses special, color-shifting paint technology to look great on the shelf with its copper color, but it looks black at address to reduce distractions. Read more about the shaft technology here. Ping’s Alta CB shaft is available in 55 (SR, R, S or X flex). Additional shaft options include Ping’s Tour 65 or 75 (R, S or X) for a $35 upcharge, or the following aftermarket shaft options for a $75 upcharge: Mitsubishi Kuro Kage Silver Dual-Core TiNi 60 (R, S or X flex), Project X HZRDUS Yellow 75 (5.5, 6.0 or 6.5 flex) or Aldila’s X-Torsion Copper (50R or 60S) shaft.

Ping’s G400 Max drivers, which are available now for pre-order, come in 9 and 10.5 degree options and with Golf Pride Tour Velvet 360 grips. They start selling for $435 apiece, plus any additional upcharges for shafts.

Discussion: See what GolfWRX members are saying about the Ping G400 Max drivers in our forums.

Your Reaction?
  • 255
  • LEGIT19
  • WOW17
  • LOL9
  • IDHT5
  • FLOP4
  • OB5
  • SHANK56

We share your golf passion. You can follow GolfWRX on Twitter @GolfWRX, Facebook and Instagram.

10 Comments

10 Comments

  1. Philip

    Jan 15, 2018 at 7:55 pm

    Okay, the last version reduced from 460 to 445 which helped to make it more forgiving and now they go back to 460 to make it more forgiving (with all of the other stuff for each version to of course). I wonder how they measure forgiveness … is it having 1000’s of real average golfers hitting balls and then tabulating the results between versions? Is it using a machine with a perfect swing? Or, is it more marketing fluff than anything else?

  2. Robert Parsons

    Jan 15, 2018 at 3:47 pm

    I would want to try a G400 Max LST.

    • Carl Schillinger

      Jan 15, 2018 at 4:03 pm

      Not available in the SFT or LST head.

      • Walter

        Jan 15, 2018 at 4:18 pm

        IOW it’s a gearhead hacker driver promising power and distance. Nothing new here.

  3. Watson

    Jan 15, 2018 at 2:17 pm

    Highest loft is 10.5º which means it’s only good for 100+++mph swing speeds.
    I just bought, for $40, a mint condition PING G2 400cc driver with 15.5º lofts to match my declining swing speed. It’s got a 47″ stock TFC 100D with Soft Regular shaft with ‘Tip Flex Control’ feature.
    It’s an oversized 3-wood which I can confidently hit 220+/- yards. The flex is high but I can handle it with my slower swing speed. It plays like a whippy hickory shafted driver!
    A perfect club for an aging golfer who once hit 250+ regularly. Fortunately my short game and putting is still fantastic.

  4. Jerry

    Jan 15, 2018 at 12:37 pm

    I can see pros swinging at 115-130 wanting more forgiveness. But I’m swingin at max 95 mph and with a decent swing, I really enjoy the sweet feel/sound and uber forgiveness of the G400.

  5. mM

    Jan 15, 2018 at 11:30 am

    I love this advertorial… it says the Max is larger than the 445 of the original G400. But doesn’t say what size it is.
    Well done Ping. Not.

    • Milton Gombo

      Jan 15, 2018 at 12:58 pm

      460cc. Shape may be more like the original ‘G’ design, which I preferred anyway.
      If you want to rant about Ping- why can’t they arrange a head-only exchange program, as there is nothing wrong with my G400 Tour 65 shaft? This new Max w/ Tour shaft runs $470, and the PGA trade in value for my 1 month old G400 is $135. They would have locked me in sight unseen with a head-only exchange program. Now I’ll be testing other brands as well.

      • Jerry

        Jan 15, 2018 at 1:38 pm

        Doubt if 15cc will make a difference. Find the shaft you like and bomb away. I did not like any of the stock offerings, did not care for the Tour Shaft, nothing special to me, and it took several months to find a shaft – using a VA Shafts 55, and have a TPT Golf 54g shaft when they release the new version this month after the show. I think shaft is key here. More than enough forgiveness.

    • Carl Schillinger

      Jan 15, 2018 at 4:02 pm

      It has a 460 cc head.

Leave a Reply

Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Whats in the Bag

Steve Stricker WITB 2024 (April)

Published

on

Driver: Titleist TSR3 (9 degrees, C4 SureFit setting)
Shaft: Fujikura Motore Speeder VC 7.2 X

3-wood: Titleist 915F (13.5 degrees)
Shaft: Mitsubishi Tensei CK Pro White 80 TX

Hybrid: Titleist 816 H1 (17 degrees)
Shaft: Fujikura Motore Speeder VC 9.2 X

Irons: Titleist T200 (3, 4), Titleist T100 (5-9)
Shafts: Project X 6.5

Wedges: Titleist Vokey SM8 (46-10F @55), Titleist Vokey SM10 (54-10S @53), Titleist Vokey SM4 (60 @59)
Shafts: True Temper Dynamic Gold X100 w/Sensicore

Putter: Odyssey White Hot No. 2

Ball: Titleist Pro V1x

Grips: Golf Pride Tour Velvet Grip Rite

Check out more in-hand photos of Steve Stricker’s clubs here.

Your Reaction?
  • 3
  • LEGIT0
  • WOW0
  • LOL0
  • IDHT1
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

Whats in the Bag

Alex Fitzpatrick WITB 2024 (April)

Published

on

  • Alex Fitzpatrick what’s in the bag accurate as of the Zurich Classic. 

Driver: Ping G430 LST (10.5 degrees)
Shaft: Fujikura Ventus Black 6 X

3-wood: TaylorMade Qi10 (15 degrees)
Shaft: Fujikura Ventus TR Black 7 X

Hybrid: Ping G430 (19 degrees)
Shaft: Fujikura Ventus Black HB 10 TX

Irons: Ping iCrossover (2), Titleist T100 (4-PW)
Shafts: Fujikura Ventus Black HB 9 TX (2), Nippon N.S. Pro Modus 3 Tour 120 X (4-9)

Wedges: Titleist Vokey Design SM10 (50-12F, 56-12D, 60-08M)
Shafts: Nippon N.S. Pro Modus 3 Tour 120 X

Putter: Bettinardi SS16 Dass

Grips: Golf Pride MCC

Check out more in-hand photos of Alex Fitzpatrick’s clubs here.

Your Reaction?
  • 2
  • LEGIT0
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

Equipment

What’s the perfect mini-driver/shaft combo? – GolfWRXers discuss

Published

on

In our forums, our members have been discussing Mini-Drivers and accompanying shafts. WRXer ‘JamesFisher1990’ is about to purchase a BRNR Mini and is torn on what shaft weight to use, and our members have been sharing their thoughts and set ups in our forum.

Here are a few posts from the thread, but make sure to check out the entire discussion and have your say at the link below.

  • PARETO: “New BRNR at 13.5. Took it over to TXG (Club Champ but TXG will always rule) in Calgary for a fit. Took the head down to 12, stuck in a Graphite Design AD at 3 wood length and 60g. Presto- numbers that rivaled my G430Max but with waaaaay tighter dispersion. Win.”
  • driveandputtmachine: “Still playing a MIni 300.  The head was only 208, so I ordered a heavier weight and play it at 3 wood length.  I am playing a Ventus Red 70.   I play 70 grams in my fairways.  I use it mainly to hit draws off the tee.  When I combine me, a driver, and trying to hit a draw it does not work out well most of the time.  So the MIni is for that. As an aside, I have not hit the newest BRNR, but the previous model wasn’t great off the deck.  The 300 Mini is very good off the deck.”
  • JAM01: “Ok, just put the BRNR in the bag along side a QI10 max and a QI10 3 wood. A load of top end redundancy. But, I have several holes at my two home courses where the flight and accuracy of the mini driver helps immensely. Mine is stock Proforce 65 at 13.5, I could see a heavier shaft, but to normal flex, as a nice alternative.”

Entire Thread: “What’s the perfect Mini-Driver/Shaft combo? – GolfWRXers discuss”

Your Reaction?
  • 3
  • LEGIT1
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK4

Continue Reading

WITB

Facebook

Trending