Connect with us

Equipment

Raw Vokey SM6 wedges now available

Published

on

Jordan Spieth plays the same Vokey SM6 wedges golfers can currently buy in stores with one exception; Spieth’s wedges have a raw finish — technically no finish — while off-the-rack SM6 wedges have one of three finishes: Tour Chrome, Steel Gray or Jet Black.

Related: Jordan Spieth WITB 2016

That changes today, when golfers will be able to purchase SM6 Raw wedges that will rust just like Spieth’s. They’ll cost $195 each, and are available on Vokey.com in six different lofts and four different grinds.

A Vokey Hand Ground wedge with a raw finish (above).

A Vokey SM6 wedge in Tour Chrome (bottom) and a Vokey Hand Ground wedge with a raw finish.

“Raw means there is no additional finish applied to the wedge, which is made of 8620 carbon steel,” says Bob Vokey, Masters Craftsman for Titleist. “It has what I like to call a satin appearance that will start to rust after some use. On tour, the raw heads give us the flexibility to grind wedges based on a player’s needs. But guys just love the look of that raw steel – some players like it even more as it rusts, kind of like a trusty hammer or another tool. These are their scoring tools.”

The Lofts and Grinds

Vokey SM6 Raw-3863

  • 50.08 F Grind
  • 52.08 F Grind
  • 54.08 M Grind, 54.10 S Grind
  • 56.08 M Grind, 56.10 S Grind
  • 58.08 M Grind, 58.10 S Grind, 58.12 K Grind
  • 60.08 M Grind, 60.10 S Grind, 60.12 K Grind

Every SM6 Raw wedge can be customized through Vokey’s WedgeWorks program, which allows golfers to choose custom stamping of up to eight characters and one of 12 paintfill colors. Golfers also have their choice from a variety of custom shafts, grips, shaft bands and ferrules.

To learn more about Vokey’s SM6 wedges, read our official review.

Your Reaction?
  • 73
  • LEGIT8
  • WOW2
  • LOL7
  • IDHT3
  • FLOP2
  • OB1
  • SHANK35

23 Comments

23 Comments

  1. MikeA

    May 18, 2016 at 10:22 am

    The prices of golf clubs have reached the ridiculous point. So we the consumer pay outrageous prices for clubs that provide for multi-millionaire professionals to get their clubs for free. I’m not buying it…

  2. Paul Adams

    May 14, 2016 at 6:12 am

    Or you can buy the black finish, just like the SM5s, and place them in CLR for 3 hours and its takes the finish off, leaving you with a raw wedge. did the same to all of mine. don’t let the Titleist machine take your money folks

  3. MP-4

    May 12, 2016 at 2:55 pm

    What is the point in having only one of your wedges with no finish?
    Titleist Raw finish wedges should be offered MOTO in all the lofts and grinds.
    No luck if you need 46, 52.12, or K grinds.
    Hope you like M grinds.

  4. Steve

    May 11, 2016 at 6:21 pm

    Charge more for doing less work. I love this country. Alot here will buy it, have too Spieth uses it

    • Rwj

      May 11, 2016 at 6:24 pm

      Exactly, people will buy because the name. More money for no finish

    • Busty McGoo

      May 13, 2016 at 2:36 am

      Agreed. Incredible how many products cost more because they have less features or are ‘limited edition’. And yet, they’ll sell like crazy. Like the $89 bikini my girl wants. Got to be what, 7 or 8 square inches of fabric there? I digress. The clubs are nice looking but the golf industry just doesn’t seem to get it if they are aiming to grow the sport and get the poor kids out there.

  5. MI6

    May 11, 2016 at 4:51 pm

    they chunked into the drink on 12 at Augusta so I’ll pass…

  6. jgpl

    May 11, 2016 at 4:37 pm

    I just bought 2 black ones last weekend – sucker

    Really annoyed about this and especially the fact raw is not a std option

    Solution: this weekend €3 for 2 litres of Coke ans a plastic bucket….it better work!

    • Bryan

      May 11, 2016 at 8:37 pm

      I soaked mine in CRL for a couple hours and then used a green scrub pad. The finish comes right off with a little elbow grease and they look great. The black finish is a little more durable than the old oil cans, coke may not work. Hope this helps.

    • MattM

      May 11, 2016 at 11:47 pm

      I don’t think the coke will work on the black wedges. The coke is meant to be used for rust since the acidity will help dissolve the metal oxidation which is the rust. The finish on the black Titleist wedge is PVD which is a similar process to chrome but it is meant to wear off to a degree. CLR is a better option to try to weaken the PVD but that still won’t work hence the elbow grease. If he was scrubbing it that hard then I would say the CLR very little. The strongest acid you will get over the shelf and without some EPA permission for non-commercial use is Muriatic Acid which is the same stuff you use in pools to balance the p.H. You can but it at Home Depot or Lowes for about $7-10 per gallon. Soak the wedge in that for a few hours to see if it does anything. Then, take a fine sandpaper (over 200 grit) and start on the sole to see if it will come off easily. I would then use an even finer sand paper on the face. Make sure to rub in the direction of the grooves and never up and down the face. I would then take a re-grooving tool and make sure they are nice and sharp and you are ready to go!

      By the way, the oil can finish was to stop the rusting at the stores so people weren’t buying “rusty” clubs. The finish is meant to wear so the final product after a few months was to look like the raw wedges you see on tour. I have a couple of sets of the oil cans that I refinish every season and reapply the oil can look with browning chemical. I have owned the same wedges for 6 years and my numbers on trackman or GC2 or no different than a brand new set of wedges. Once you raw them, you can continue to rehab them back to life. It is a beautiful thing! I hate having to buy new clubs because the finish goes. I think that is one of the reasons why they sell them for more to be honest. Most people who buy raw or oil can wedges buy fewer wedges in the long run because they look the same after 6 months or 3 years unless you hit a massive rock or do something stupid! Titleist has gotta get paid son!

      • norcalgolf

        May 12, 2016 at 11:06 am

        The Jet Black finish is a QPQ treatment, not PVD! The PVD finish was on the last TVD blk ion wedges. You can remove QPQ, but its not as easy as the oil can or blk ox finishes of the past. Also the QPQ finish seems harder and tougher to bend in my opinion.

  7. Blake

    May 11, 2016 at 1:39 pm

    Wow! titleist screwed this one up. this should be a standard option since every wedge is raw originally

  8. Offensively priced

    May 11, 2016 at 11:14 am

    What did the (19)5 fingers say to the face? SLAP.

  9. James

    May 11, 2016 at 10:41 am

    I don’t get it. Every single wedge out of the factory is raw. Why charge more to save them the trouble of adding a finish?

  10. Nolanski

    May 11, 2016 at 9:24 am

    Cant you just buy some black ones and take the finish off?

    • rechlo67

      May 11, 2016 at 1:27 pm

      Yes you can, it even says on the shaft band that the black finish will fade and rust over time.

      You can strip them easily for under five bucks. put them in a bucket and pour coke and fanta on them and let them sit for a couple of hours.

  11. SHANK

    May 11, 2016 at 9:20 am

    Vokey is insane charging these prices anymore. The oil can that rusted was the same price as their other wedges and they got rid of them. Why? Probably $$$$

  12. Beau Foster

    May 11, 2016 at 8:57 am

    So you cut out the finishing step(s), but are charging $50 more? How many suckers are gonna buy these because they rust?

  13. Weekend Duffer

    May 11, 2016 at 7:56 am

    $200 each lmao

    • David Labbe

      May 11, 2016 at 8:31 am

      $200 each and I heard they don’t work very well on the 12th hole at Augusta.

Leave a Reply

Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Whats in the Bag

Matthieu Pavon WITB 2024 (May)

Published

on

Driver: Ping G430 Max (9 degrees)
Shaft: Fujikura Ventus TR Black 6 X

3-wood: Ping G430 LST (15 degrees)
Shaft: Fujikura Ventus TR Black 7 X

Hybrid: Ping G430 (19 degrees)
Shaft: Fujikura Ventus Black 10 X

Irons: Ping i230 (3-PW)
Shafts: Nippon Modus3 Tour 120 X

Wedges: Ping Si59 (52-12S, 58-8B)
Shafts: Nippon Modus3 Tour 120 X

Putter: Ping Cadence TR Tomcat C
Grip: SuperStroke Claw 1.0P

Grips: Golf Pride MCC Align

Ball: Titleist Pro V1

Check out more in-hand photos of Pavon’s gear here.

 

 

Your Reaction?
  • 1
  • LEGIT1
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

Equipment

Spotted: Tommy Fleetwood’s TaylorMade Spider Tour X Prototype putter

Published

on

Tommy Fleetwood has been attached to his Odyssey White Hot Pro #3 putter for years now. However, this week at the Wells Fargo Championship, we did spot him testing a new putter that is very different, yet somewhat similar, to his current gamer.

This new putter is a TaylorMade Spider Tour X head but with a brand new neck we haven’t seen on a Spider before. A flow neck is attached to the Spider head and gives the putter about a 1/2 shaft offset. This style neck will usually increase the toe hang of the putter and we can guess it gets the putter close to his White Hot Pro #3.

Another interesting design is that lack of TaylorMade’s True Path alignment on the top of the putter. Instead of the large white center stripe, Tommy’s Spider just has a very short white site line milled into it. As with his Odyssey, Tommy seems to be a fan of soft inserts and this Spider prototype looks to have the TPU Pure Roll insert with 45° grooves for immediate topspin and less hopping and skidding.

The sole is interesting as well in that the rear weights don’t look to be interchangeable and are recessed deep into the ports. This setup could be used to push the CG forward in the putter for a more blade-like feel during the stroke, like TaylorMade did with the Spider X Proto Scottie Scheffler tested out.

Tommy’s putter is finished off with an older Super Stroke Mid Slim 2.0 grip in blue and white. The Mid Slim was designed to fit in between the Ultra Slim 1.0 and the Slim 3.0 that was a popular grip on tour.

Your Reaction?
  • 13
  • LEGIT2
  • WOW2
  • LOL1
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

Equipment

Club Junkie WITB, league night week 4: Some old, some new

Published

on

We enter week 4 of Thursday night men’s league feeling a little more confident in the game. BK is hoping to go a little lower and reduce the mistakes out there with these clubs in the bag. Watch the video for the full breakdown of why these clubs are getting the starting nod this week!

Driver: Titleist TSR2 (10 degrees, neutral setting)
Shaft: Mitsubishi Diamana WB 63 X

3-wood: TaylorMade Qi10 (15 degrees)
Shaft: UST Mamiya Lin-Q M40X TSPX Blue 7F5

7-wood: Ping G430 Max (-1 degree, flat Ssetting)
Shaft: Fujikura Ventus TR Blue 8 S

Iron: Mizuno Pro Fli-Hi 4
Shaft: Aerotech Steelfiber hls880 S

Irons: PXG 0317 Tour (5-PW)
Shaft: LA Golf A-Series 105 Low (4)

Wedge: Titleist Vokey SM10 (50-08F)
Shaft: UST Mamiya Dart V 105 F4 Wedge

Wedge: Ping S159 (56-10H)
Shaft: Ping Z-Z115

Wedge: Ping S159 (60-08B)
Shaft: Ping Z-Z115

Putter: PXG Battle Ready II Brandon
Shaft: BGT Stability Tour Spec One

Ball: Callaway Chrome Tour X

Your Reaction?
  • 2
  • LEGIT2
  • WOW2
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK2

Continue Reading

WITB

Facebook

Trending