Equipment
TaylorMade Tour Preferred EF wedges
TaylorMade’s Tour Preferred EF wedges use chemistry to offer golfers longer-lasting, higher-spinning grooves.
Instead of milling or casting the grooves, like most wedges on the market, TaylorMade uses a chemical process called electroforming — thus the “EF” — to make a face insert with grooves that are consistently sharper and more durable than their predecessors.
The science is complicated, so I’ll do my best to simplify it.
Nickel and cobalt materials go through an ionization process in an electrolytic solution, then ions get plated onto a master model. The “master” is a mold that forms the grooves and micro-milling of the face insert. When the nickel cobalt solution lifts off the master, what’s left is a sheet of material that has taken the shape of the mold.
Think of a loose leaf piece of paper, but the lines are grooves.
The material is 0.25 millimeters thick — about the size of a piece of paper. Face inserts are then laser-cut from the sheet, and adhered to the 1025 carbon steel body.
[quote_box_center]”The insert material feels like a credit card,” says Clay Long, TaylorMade’s Director of Product Creation for TaylorMade Putters and Wedges. “You can bend it with your fingers.”[/quote_box_center]
The electroformed nickel cobalt insert is about 50 times harder than carbon steel, but according to Long, the increased hardness doesn’t mean a harder feel than the TaylorMade’s previous wedge models.
[quote_box_center]”The feel of the face when hitting a shot is no different than carbon steel,” he says. [/quote_box_center]
Since the insert is made from a master mold, each of the grooves are consistently sharp and won’t dull as fast as milled or cast grooves. The dark PVD finish will show signs of wear, but the grooves will last “for what seems like forever,” Long says.
While PGA Tour players like Dustin Johnson and Sergio Garcia don’t have a problem getting their hands on fresh new wedges whenever they want, both players have put the new wedges in the bag. Johnson won the Northern Trust Open with three Tour Preferred EF wedges (52, 56 and 60 degrees).
The shapes and sole grinds of the EF wedges are consistent with the original Tour Preferred models. They’re offered in two sole grinds, “Tour” and “ATV,” although the ATV grind has a slightly more narrow sole than the original. Also, a few more loft and bounce combinations have been added.
Tour Grind
The Tour Grind will be available in eight lofts (47, 50, 52, 54, 56, 58, 60 and 62 degrees) with bounce options ranging from 8 to 15 degrees.
ATV Grind
The ATV grind will be available in five lofts (52, 54, 56, 58 and 60 degrees).
The Tour Preferred EF wedges ($159) come stock with KBS Shafts, and will hit stores on April 10.
For more information, click on the spec sheet below.
See what GolfWRX members are saying about the wedges in the forums.
- LIKE112
- LEGIT21
- WOW11
- LOL6
- IDHT6
- FLOP10
- OB6
- SHANK37
Cobra released its first commercially available 3D-printed steel putter in 2020. Now, the company is bringing its first 3D-printed irons to retail with new LIMIT3D irons, which Cobra’s vice president of product architecture, Jose Miraflor, calls “the most significant technological advancement to happen to the category in the past 20 years” and “a look into the future of golf club design and performance.”
Cobra leveraged the expertise of computational design software firm nTop to create an ambitious design: a compact players blade that offers similar forgiveness as a larger, game-improvement style club and forged iron feel.
Speaking on the partnership, Mike Yagley, Vice President of Innovation & AI, Cobra Golf said, “nTop’s computational design tools integrated with 3D printing, also known as additive manufacturing, allowed us to create an incredible new design that looks and feels like a forged blade but performs like a larger, game-improvement iron. No one has done this before, and we’re excited to introduce these unique irons to the world.”
As Cobra explains, more forgiving irons are traditionally larger and sacrifice feel. Due to the limitations of casting and forging, creating a more compact, better-feeling iron that still delivers forgiveness was only possible with 3D printing. The resulting profile of Cobra’s LIMIT3D irons is smaller than Cobra’s King Tour irons.
LIMIT3D irons are 3D printed for 316L stainless steel with an internal lattice structure, which allowed engineers to position 33 percent of the iron’s overall weight to the exterior for greater MOI. 100 grams of tungsten is positioned in the heel and toe of each clubhead for low CG for ease of launch and high MOI for greater forgiveness.
Additionally, using nTop’s design software and additive manufacturing allowed for a substantially faster prototyping process, which enabled engineers to test more designs and mass placements for a superior finished product.
Cobra LIMIT3D irons: Pricing, specs, availability
- 350 individually numbered sets available in the U.S. and Canada (500 sets total worldwide)
- Available for custom order June 7
- Price: $3,000
- Set: 4-PW, RH only
- Full range of aftermarket shafts, grips
- LIKE3
- LEGIT1
- WOW1
- LOL0
- IDHT0
- FLOP0
- OB0
- SHANK0
Equipment
Coolest thing for sale in the GolfWRX Classifieds (5/14/24): Mizuno Pro 241 Azalea Edition irons
At GolfWRX, we are a community of like-minded individuals that all experience and express our enjoyment of the game in many ways.
It’s that sense of community that drives day-to-day interactions in the forums on topics that range from best driver to what marker you use to mark your ball. It even allows us to share another thing we all love – buying and selling equipment.
Currently, in our GolfWRX buy/sell/trade (BST) forum, there is a listing for a set of Mizuno Pro 241 Azalea Edition irons.
From the seller: (@ayc25): “Brand new in box / plastic. 4-PW. Custom shaft bands, grips, ferrules. Dynamic Gold S200 Tour Issue. NO TRADES. Ships next day UPS Ground from Northern Virginia. $1695 shipped or best offer.”
To check out the full listing in our BST forum, head through the link: Mizuno Pro 241 Azalea Edition irons
This is the most impressive current listing from the GolfWRX BST, and if you are curious about the rules to participate in the BST Forum you can check them out here: GolfWRX BST Rules
- LIKE0
- LEGIT0
- WOW1
- LOL0
- IDHT0
- FLOP0
- OB0
- SHANK0
- Michael Block what’s in the bag accurate as of the PGA Championship.
Driver: TaylorMade Qi10 “Dot” (9 degrees @7.5)
Shaft: Fujikura Ventus Black 6 X
3-wood: TaylorMade Qi10 Tour (15 degrees @14.25)
Shaft: 2024 Fujikura Ventus Blue 7 X
5-wood: TaylorMade M5 (19 degrees @17)
Shaft: Mitsubishi Tensei CK Orange 70 TX
Irons: TaylorMade Stealth UDI (4), TaylorMade Proto (5-9)
Shafts: Graphite Design Tour AD DI Hybrid 85 X (4), Project X 6.5 (5-9)
Wedges: TaylorMade Milled Grind 4 (46-09SB, 60 [unconfirmed]), TaylorMade Milled Grind 2 (52-09S, 56)
Shafts: True Temper Dynamic Gold Tour Issue S400
Putter: Odyssey White Hot 2-Ball
Grips: Golf Pride MCC
See the rest of Michael Block’s WITB in the forums.
- LIKE16
- LEGIT1
- WOW1
- LOL4
- IDHT1
- FLOP1
- OB1
- SHANK5
Dave Portnoy places monstrous outright bet for the 2024 Masters
Things got heated at the Houston Open between Tony Finau and Alejandro Tosti. Here’s why
Justin Thomas on the equipment choice of Scottie Scheffler that he thinks is ‘weird’
Tiger Woods arrives at 2024 Masters equipped with a putter that may surprise you
‘Absolutely crazy’ – Major champ lays into Patrick Cantlay over his decision on final hole of RBC Heritage
Report: Tiger Woods has ‘eliminated sex’ in preparation for the 2024 Masters
Two star names reportedly blanked Jon Rahm all week at the Masters
Report: LIV Golf identifies latest star name they hope to sign to breakaway tour
Neal Shipley presser ends in awkward fashion after reporter claims Tiger handed him note on 8th fairway
What we know about Bryson DeChambeau’s 3D-printed Avoda irons
Michael Block WITB 2024 (May)
Michael Block what’s in the bag accurate as of the PGA Championship. Driver: TaylorMade Qi10 “Dot” (9 degrees @7.5) Shaft:...
Brooks Koepka WITB 2024 (May)
Brooks Koepka what’s in the bag accurate as of the PGA Championship. Driver: TaylorMade Qi10 “Dot” (10.5 degrees @9.75) Shaft:...
Rory McIlroy’s winning WITB: 2024 Wells Fargo Championship
Driver: TaylorMade Qi10 (9 degrees @8.25) Buy here. Shaft: Fujikura Ventus Black 6 X 3-wood: TaylorMade Qi10 (15 degrees) Buy here. Shaft:...
Kevin Tway WITB 2024 (May)
Kevin Tway what’s in the bag accurate as of the Wells Fargo Championship. More photos from the event here. Driver:...
-
19th Hole3 weeks agoLET pro gives detailed financial breakdown of first week on tour…and the net result may shock you
-
19th Hole7 days agoReport: LIV star turns down PGA Championship invite due to ‘personal commitments’
-
19th Hole2 weeks agoGary Player claims this is what ‘completely ruined’ Tiger Woods’ career
-
Equipment6 days agoDetails on Justin Thomas’ driver switch at the Wells Fargo Championship
-
Whats in the Bag2 weeks agoTeam McIlowry (Rory McIlroy, Shane Lowry) winning WITBs: 2024 Zurich Classic
-
Whats in the Bag7 days agoKeegan Bradley WITB 2024 (May)
-
Equipment2 weeks agoGolf fans left surprised by LIV’s choice of course for its 2024 individual championship event
-
Equipment2 weeks agoWhy Wesley Bryan is playing two 4-irons this week
Nevin
May 24, 2015 at 7:39 pm
I played with two friends who have these in their bags now. Both are extremely happy with them and they are clearly spinning it more with these grooves. I think I’ll keep my SCOR’s for now but the do look and feel great.
Desmond
Apr 19, 2015 at 4:13 am
The insert gives it an odd look at address. The grooves should extend more outwards towards the toe so you actually hit a groove when opening the club face. TM can’t hit a home run with wedges… they are always fishing.
Gary
Apr 10, 2015 at 1:26 pm
I am very much into the Cally Mack Daddy 2 wedges and also like the Vokey SM5 very much. If the spin on these wedges is pretty good and the grooves are indeed long lasting, would have to say they would be very much worth a try. Hopefully the feel would be pretty decent too.
MRC
Apr 8, 2015 at 11:22 pm
Sticking w my Mizuno wedges….their forged.
Ken N
Apr 8, 2015 at 6:39 pm
While I like the overall look of the wedge on the back, I can’t help but look at the insert on the face and think “plastic insert.” Maybe it’s because there’s a tiny space between the bottom edge of the face and the insert, but the thing just doesn’t look clean to me. I suppose I expected better execution from TaylorMade. But if it’s good enough for DJ, shouldn’t it be good enough for us (a)’s? I just wonder, if he wasn’t bound to contractual obligations, which wedges would he choose from Titleist, Cleveland, Ping, etc?
Tom Duckworth
Apr 7, 2015 at 4:26 pm
Really like the finish. It sounds like a good idea I’m not a TM guy but not a hater. I would give them a honest try. I like the ATV grind on a 58 or 60.
Tom Stickney
Apr 7, 2015 at 1:05 am
Have them in my bag…flatter trajectory as well.
Jason
Apr 7, 2015 at 11:26 pm
I wouldn’t think most of us average golfers would need a flatter trajectory, especially with a wedge. Is that a good thing in your case?
Dan
Apr 6, 2015 at 9:29 pm
Not that it has anything to do with the wedges, but DJ lost the Northern Trust Open in a playoff to James Hahn.
Jeffrey Trigger
Apr 7, 2015 at 12:56 am
So, you’re saying he has a second place, to go with his first place, and his sixth place, and his top ten world ranking…
Gary
Jun 8, 2015 at 7:11 pm
DJ played great in that tournament but the winner hit two great putts in the playoff.
Gubment Cheez
Apr 6, 2015 at 6:29 pm
These wedges are junk
Might as well be pinemeadow
R
Apr 6, 2015 at 5:20 pm
The science, rather chemistry, is far from complicated. It’s a very simple “positive is attracted to negative” process.
Matt
Apr 6, 2015 at 3:35 pm
Nothing bad to say about these, love the finish and how they seem to sit at address from the pictures. Props TM, thumbs up from me
Chuck
Apr 6, 2015 at 1:10 pm
Very nice looking wedges. Props to TM on some very thoughtful design.
I still wish I knew why TM gave up on its old replaceable-face wedge designs. I never bought one; I never even played with one! But I always admired it as a good design idea. It came and went so fast, I just never found the opportunity to try one.
sgniwder99
Apr 6, 2015 at 4:47 pm
Some of their tour guys still use them, too.
christian
Apr 7, 2015 at 4:38 am
Still? Are they an old model or?
Chuck
Apr 7, 2015 at 3:18 pm
Yeah, an old design. From about 2010-11. I seem to recall their being around for about two years or so. Cleverly built, such that you could use the standard TM hosel torque wrench to replace faces. Here’s the great Wade Liles from the TM tour van way back in 2009(!):
https://www.youtube.com/watch?v=COPH6spfiKw
I always had a sneaking suspicion that both the introduction and the discontinuation had something to do with the 2010 groove rule. If I recall correctly, they came into the marketplace when the groove rule had been passed but had not yet gone into effect. Then there would have been the issue of whether you were using a conforming-groove wedge. Were the replacement faces marked for conformity? I don’t recall. Obviously, that is the whole idea, conforming or not; to be able to keep a wedge whose weight and shape and bounce and shaft were all perfect for you, but the grooves were worn out. So just replace the face. Still seems like a pretty cool idea to me.