Connect with us

Equipment

TaylorMade Tour Preferred EF wedges

Published

on

TaylorMade’s Tour Preferred EF wedges use chemistry to offer golfers longer-lasting, higher-spinning grooves.

Instead of milling or casting the grooves, like most wedges on the market, TaylorMade uses a chemical process called electroforming — thus the “EF” — to make a face insert with grooves that are consistently sharper and more durable than their predecessors.

The science is complicated, so I’ll do my best to simplify it.

Nickel and cobalt materials go through an ionization process in an electrolytic solution, then ions get plated onto a master model. The “master” is a mold that forms the grooves and micro-milling of the face insert. When the nickel cobalt solution lifts off the master, what’s left is a sheet of material that has taken the shape of the mold.

Think of a loose leaf piece of paper, but the lines are grooves.

The material is 0.25 millimeters thick — about the size of a piece of paper. Face inserts are then laser-cut from the sheet, and adhered to the 1025 carbon steel body.

[quote_box_center]”The insert material feels like a credit card,” says Clay Long, TaylorMade’s Director of Product Creation for TaylorMade Putters and Wedges. “You can bend it with your fingers.”[/quote_box_center]

The electroformed nickel cobalt insert is about 50 times harder than carbon steel, but according to Long, the increased hardness doesn’t mean a harder feel than the TaylorMade’s previous wedge models.

[quote_box_center]”The feel of the face when hitting a shot is no different than carbon steel,” he says. [/quote_box_center]

Since the insert is made from a master mold, each of the grooves are consistently sharp and won’t dull as fast as milled or cast grooves. The dark PVD finish will show signs of wear, but the grooves will last “for what seems like forever,” Long says.

While PGA Tour players like Dustin Johnson and Sergio Garcia don’t have a problem getting their hands on fresh new wedges whenever they want, both players have put the new wedges in the bag. Johnson won the Northern Trust Open with three Tour Preferred EF wedges (52, 56 and 60 degrees).

The shapes and sole grinds of the EF wedges are consistent with the original Tour Preferred models. They’re offered in two sole grinds, “Tour” and “ATV,” although the ATV grind has a slightly more narrow sole than the original. Also, a few more loft and bounce combinations have been added.

Tour Grind

83feb0d9ba7f568e655dc93d4e92ee8c

The Tour Grind will be available in eight lofts (47, 50, 52, 54, 56, 58, 60 and 62 degrees) with bounce options ranging from 8 to 15 degrees.

ATV Grind

ATVtaylormade

The ATV grind will be available in five lofts (52, 54, 56, 58 and 60 degrees).

The Tour Preferred EF wedges ($159) come stock with KBS Shafts, and will hit stores on April 10.

For more information, click on the spec sheet below.

Screen Shot 2015-04-06 at 10.57.37 AM

See what GolfWRX members are saying about the wedges in the forums. 

Your Reaction?
  • 112
  • LEGIT21
  • WOW11
  • LOL6
  • IDHT6
  • FLOP10
  • OB6
  • SHANK37

He played on the Hawaii Pacific University Men's Golf team and earned a Masters degree in Communications. He also played college golf at Rutgers University, where he graduated with a Bachelor of Arts in Journalism.

18 Comments

18 Comments

  1. Nevin

    May 24, 2015 at 7:39 pm

    I played with two friends who have these in their bags now. Both are extremely happy with them and they are clearly spinning it more with these grooves. I think I’ll keep my SCOR’s for now but the do look and feel great.

  2. Desmond

    Apr 19, 2015 at 4:13 am

    The insert gives it an odd look at address. The grooves should extend more outwards towards the toe so you actually hit a groove when opening the club face. TM can’t hit a home run with wedges… they are always fishing.

  3. Gary

    Apr 10, 2015 at 1:26 pm

    I am very much into the Cally Mack Daddy 2 wedges and also like the Vokey SM5 very much. If the spin on these wedges is pretty good and the grooves are indeed long lasting, would have to say they would be very much worth a try. Hopefully the feel would be pretty decent too.

  4. MRC

    Apr 8, 2015 at 11:22 pm

    Sticking w my Mizuno wedges….their forged.

  5. Ken N

    Apr 8, 2015 at 6:39 pm

    While I like the overall look of the wedge on the back, I can’t help but look at the insert on the face and think “plastic insert.” Maybe it’s because there’s a tiny space between the bottom edge of the face and the insert, but the thing just doesn’t look clean to me. I suppose I expected better execution from TaylorMade. But if it’s good enough for DJ, shouldn’t it be good enough for us (a)’s? I just wonder, if he wasn’t bound to contractual obligations, which wedges would he choose from Titleist, Cleveland, Ping, etc?

  6. Tom Duckworth

    Apr 7, 2015 at 4:26 pm

    Really like the finish. It sounds like a good idea I’m not a TM guy but not a hater. I would give them a honest try. I like the ATV grind on a 58 or 60.

  7. Tom Stickney

    Apr 7, 2015 at 1:05 am

    Have them in my bag…flatter trajectory as well.

    • Jason

      Apr 7, 2015 at 11:26 pm

      I wouldn’t think most of us average golfers would need a flatter trajectory, especially with a wedge. Is that a good thing in your case?

  8. Dan

    Apr 6, 2015 at 9:29 pm

    Not that it has anything to do with the wedges, but DJ lost the Northern Trust Open in a playoff to James Hahn.

    • Jeffrey Trigger

      Apr 7, 2015 at 12:56 am

      So, you’re saying he has a second place, to go with his first place, and his sixth place, and his top ten world ranking…

    • Gary

      Jun 8, 2015 at 7:11 pm

      DJ played great in that tournament but the winner hit two great putts in the playoff.

  9. Gubment Cheez

    Apr 6, 2015 at 6:29 pm

    These wedges are junk
    Might as well be pinemeadow

  10. R

    Apr 6, 2015 at 5:20 pm

    The science, rather chemistry, is far from complicated. It’s a very simple “positive is attracted to negative” process.

  11. Matt

    Apr 6, 2015 at 3:35 pm

    Nothing bad to say about these, love the finish and how they seem to sit at address from the pictures. Props TM, thumbs up from me

  12. Chuck

    Apr 6, 2015 at 1:10 pm

    Very nice looking wedges. Props to TM on some very thoughtful design.

    I still wish I knew why TM gave up on its old replaceable-face wedge designs. I never bought one; I never even played with one! But I always admired it as a good design idea. It came and went so fast, I just never found the opportunity to try one.

    • sgniwder99

      Apr 6, 2015 at 4:47 pm

      Some of their tour guys still use them, too.

      • christian

        Apr 7, 2015 at 4:38 am

        Still? Are they an old model or?

        • Chuck

          Apr 7, 2015 at 3:18 pm

          Yeah, an old design. From about 2010-11. I seem to recall their being around for about two years or so. Cleverly built, such that you could use the standard TM hosel torque wrench to replace faces. Here’s the great Wade Liles from the TM tour van way back in 2009(!):

          https://www.youtube.com/watch?v=COPH6spfiKw

          I always had a sneaking suspicion that both the introduction and the discontinuation had something to do with the 2010 groove rule. If I recall correctly, they came into the marketplace when the groove rule had been passed but had not yet gone into effect. Then there would have been the issue of whether you were using a conforming-groove wedge. Were the replacement faces marked for conformity? I don’t recall. Obviously, that is the whole idea, conforming or not; to be able to keep a wedge whose weight and shape and bounce and shaft were all perfect for you, but the grooves were worn out. So just replace the face. Still seems like a pretty cool idea to me.

Leave a Reply

Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Equipment

Q&A: Martin Trainer on his Bobby Grace “Greg Chalmers” putter, 6.5-degree driver, and “butter knife” 2-iron

Published

on

As unbiasedly as I can put it, Martin Trainer has one of the coolest club setups in professional golf. (At some point soon, I’ll put together a top-10 list of “coolest club setups on Tour,” but I know that Trainer will be in the top-10)

What a lineup. He plays a 6.5-degree Wilson prototype driver, a 13-degree Wilson prototype 3-wood, a true blade Wilson Staff Model 2-iron, and a Bobby Grace “Greg Chalmers Commemorative” putter!

 

View this post on Instagram

 

A post shared by GolfWRX (@golfwrx)

I mean, look at this 2-iron from address…

To quote the great author R.L. Stine: “Goosebumps.”

On Wednesday at the 2024 Texas Children’s Houston Open, I caught up with Trainer to learn more about his bag setup.

Here’s what he had to say:

You have the Internet going crazy over your bag setup, and your putter. Where’d you pick the Bobby Grace-Greg Chalmers putter up? How long have you had it?

MT: This was from when Bobby Grace came to my course in California: Cal Club. And for whatever reason, they just started having them in the shop. So then I took my buddy’s, started using it, and made, like, a million putts in a row, which is how every putter story begins, I guess.

And then, I bought a couple of my own, used it for years, got to the Tour with it, won on Tour with it (the 2019 Puerto Rico Open). Then, about a year later, started using another putter, did that for a couple years, but now it’s back in the bag.

When did it come back in the bag?

MT: December of this past year. So a few months ago.

What year would you say was the first time you threw that in the bag, or, like, when you bought it?

MT: God…Probably, 2016, maybe? 2018?

Do you remember how much you paid for it?

MT: I don’t know, actually. Maybe $100-150 bucks or something. I think that’s the only golf club I’ve bought between high school and now. Well, two, since I bought two of them.

The driver is interesting, too. What went into the prototyping process?

MT: That was a version of the current driver, but it was the prototype that they first came out with for Tour guys to try. And for whatever reason, I just never switched out to the new one.

It’s just 6.5 degrees, right?

MT: Yeah. Very low loft, yeah.

What kind of ball speed do you have with that these days?

MT: Like high 170’s.

Yeah, that’ll work. And then a 2-iron blade? We’re seeing fewer and fewer of those out here.

MT: Yeah. The butter knife.

Very cool thing to have in the bag. Have you done any testing with driving irons? 

MT: Yeah, I used to have a thicker one, but it was a little offset, and I never hit it that well. And then finally, I started messing around with the butter knife. And I remember the first time I looked down at it, I was terrified. And then I ended up getting used to it, putting it in play, and it’s been in place since. It’s a pretty good club for me.

How far do you carry that? 

MT: Like 235.

A good little wind club, I’m sure.

MTL Yeah, exactly. I can hit it very low. It’s great.

I love it. You have people shook looking at that. Thanks for the time, man. 

MT: Absolutely.

To see more photos and discussion of Trainer’s bag, click here.

Your Reaction?
  • 7
  • LEGIT2
  • WOW1
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

Equipment

Coolest thing for sale in the GolfWRX Classifieds (3/28/24): L.A.B. Golf Mezz.1 Max Broomstick with LA Golf Paige Spiranac shaft

Published

on

At GolfWRX, we are a community of like-minded individuals that all experience and express our enjoyment of the game in many ways.

It’s that sense of community that drives day-to-day interactions in the forums on topics that range from best driver to what marker you use to mark your ball. It even allows us to share another thing we all love – buying and selling equipment.

Currently, in our GolfWRX buy/sell/trade (BST) forum, there is a listing for a L.A.B. Golf Mezz.1 Max Broomstick putter with LA Golf Paige Spiranac shaft.

From the seller: (@hibcam): “L.A.B. GOLF Mezz.1 Max Broomstick- LA Golf Paige Spiranac Shaft- 44″/79.5. Brand new, never used brown leather cover. The head was professionally anodized from Orange to Blue (Orange looked bad with the Pink shaft so I had it changed). Only a few rounds on this combo. Please see last pic- slight ding on back corner. 8.5-10 condition. THE SHAFT COST $475/ THE PUTTER $625. $799 shipped in the US. ONLY $699 SHIPPED.”

To check out the full listing in our BST forum, head through the link: L.A.B. Golf Mezz.1 Max Broomstick with LA Golf Paige Spiranac shaft

This is the most impressive current listing from the GolfWRX BST, and if you are curious about the rules to participate in the BST Forum you can check them out here: GolfWRX BST Rules

Your Reaction?
  • 0
  • LEGIT0
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

Equipment

Spotted: Tony Finau’s driver shaft change at the 2024 Texas Children’s Houston Open

Published

on

Tony Finau has always been known as one of the longest players on the PGA Tour, but he has recently been working on adding a little more distance. Last year, Finau averaged 118.3 mph club head speed and 178.08 mph ball speed, all while playing a Mitsubishi Diamana D+ Limited 70 TX driver shaft. This year, he has increased his club head speed to 123.93 mph and his ball speed to 183.32 mph.

However, Finau’s overall distance has decreased by two yards in that time. From a fitting perspective, something was amiss. We asked Tony about the shaft change at the Texas Children’s Hospital Open.

“[I’m seeing] better numbers with the spin. My driver’s been a little high spin for me over the last month or so, and so I just figured it was time to probably check out the equipment,” Finau said. “And it definitely showed me that I was using a shaft that’s maybe a little too tip-stiff for me, the way I load the club now. [I’m seeing] better numbers with the spin.”

Finau switched from the Mitsubishi Diamana D+ Limited 70 TX into the Diamana GT 70 TX. The newer Diamana GT has a slightly different profile than the D+ Limited with the stiffest handle section in the Diamana lineup. The mid sections between the two are similar stiffness but the tip is just slightly stiffer in the Diamana GT. Both shafts are within one gram of each other in the 70 TX. The torque rating on the GT is 0.1 higher than the D+Limited’s 2.7 measurement.

Mitsubishi lists the Diamana GT as a shaft between the mid-launching Diamana TB and the new low-launch Diamana WB shafts. For most players, it would be considered a mid/low launch and low-spin shaft option. Mitsubishi’s Xlink Tech Resin System makes sure the maximum carbon fiber content is there for smooth feel without reducing the strength of the shaft. MR70 carbon fiber is used for reinforcing the shaft and boron is used in the tip for its high strength and compression properties.

Finau is still using his trusty Ping G430 LST driver in 9 degrees and has the adjustable hosel set to -1 degree of loft (standard lie angle). Finau’s long-time favorite Lamkin UTX Green grip is installed. He definitely has a few extra wraps of tape under that grip as you can see the bulge down where the grip meets the shaft.

One final note: Per Ping’s PGA Tour rep Kenton Oates, Finau’s driver is also adjusted to play with an additional degree of loft to help dial in his desired launch.

We’ll see how he fares with the new setup this week in Houston!

Your Reaction?
  • 18
  • LEGIT4
  • WOW4
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

WITB

Facebook

Trending