Equipment
TaylorMade Tour Preferred EF wedges
TaylorMade’s Tour Preferred EF wedges use chemistry to offer golfers longer-lasting, higher-spinning grooves.
Instead of milling or casting the grooves, like most wedges on the market, TaylorMade uses a chemical process called electroforming — thus the “EF” — to make a face insert with grooves that are consistently sharper and more durable than their predecessors.
The science is complicated, so I’ll do my best to simplify it.
Nickel and cobalt materials go through an ionization process in an electrolytic solution, then ions get plated onto a master model. The “master” is a mold that forms the grooves and micro-milling of the face insert. When the nickel cobalt solution lifts off the master, what’s left is a sheet of material that has taken the shape of the mold.
Think of a loose leaf piece of paper, but the lines are grooves.
The material is 0.25 millimeters thick — about the size of a piece of paper. Face inserts are then laser-cut from the sheet, and adhered to the 1025 carbon steel body.
[quote_box_center]”The insert material feels like a credit card,” says Clay Long, TaylorMade’s Director of Product Creation for TaylorMade Putters and Wedges. “You can bend it with your fingers.”[/quote_box_center]
The electroformed nickel cobalt insert is about 50 times harder than carbon steel, but according to Long, the increased hardness doesn’t mean a harder feel than the TaylorMade’s previous wedge models.
[quote_box_center]”The feel of the face when hitting a shot is no different than carbon steel,” he says. [/quote_box_center]
Since the insert is made from a master mold, each of the grooves are consistently sharp and won’t dull as fast as milled or cast grooves. The dark PVD finish will show signs of wear, but the grooves will last “for what seems like forever,” Long says.
While PGA Tour players like Dustin Johnson and Sergio Garcia don’t have a problem getting their hands on fresh new wedges whenever they want, both players have put the new wedges in the bag. Johnson won the Northern Trust Open with three Tour Preferred EF wedges (52, 56 and 60 degrees).
The shapes and sole grinds of the EF wedges are consistent with the original Tour Preferred models. They’re offered in two sole grinds, “Tour” and “ATV,” although the ATV grind has a slightly more narrow sole than the original. Also, a few more loft and bounce combinations have been added.
Tour Grind
The Tour Grind will be available in eight lofts (47, 50, 52, 54, 56, 58, 60 and 62 degrees) with bounce options ranging from 8 to 15 degrees.
ATV Grind
The ATV grind will be available in five lofts (52, 54, 56, 58 and 60 degrees).
The Tour Preferred EF wedges ($159) come stock with KBS Shafts, and will hit stores on April 10.
For more information, click on the spec sheet below.
See what GolfWRX members are saying about the wedges in the forums.
- LIKE112
- LEGIT21
- WOW11
- LOL6
- IDHT6
- FLOP10
- OB6
- SHANK37
Equipment
Coolest thing for sale in the GolfWRX Classifieds (4/18/24): TaylorMade BRNR mini driver head
At GolfWRX, we are a community of like-minded individuals that all experience and express our enjoyment of the game in many ways.
It’s that sense of community that drives day-to-day interactions in the forums on topics that range from best driver to what marker you use to mark your ball. It even allows us to share another thing we all love – buying and selling equipment.
Currently, in our GolfWRX buy/sell/trade (BST) forum, there is a listing for a TaylorMade BRNR mini driver head
From the seller: (@lasallen): “For sale is a BRNR mini 11.5 deg head only in brand new condition. $325 shipped.”
To check out the full listing in our BST forum, head through the link: TaylorMade BRNR mini driver head
This is the most impressive current listing from the GolfWRX BST, and if you are curious about the rules to participate in the BST Forum you can check them out here: GolfWRX BST Rules
- LIKE0
- LEGIT0
- WOW0
- LOL0
- IDHT0
- FLOP0
- OB0
- SHANK0
Equipment
Coolest thing for sale in the GolfWRX Classifieds (4/18/24): Ping PLD Limited Anser – 1988 Open Championship – #2 of only 88 Made
At GolfWRX, we are a community of like-minded individuals that all experience and express our enjoyment of the game in many ways.
It’s that sense of community that drives day-to-day interactions in the forums on topics that range from best driver to what marker you use to mark your ball. It even allows us to share another thing we all love – buying and selling equipment.
Currently, in our GolfWRX buy/sell/trade (BST) forum, there is a listing for a Ping PLD Limited Anser – 1988 Open Championship – #2 of only 88 Made.
From the seller: (@DLong72): “Ping PLD Limited Anser – 1988 Open Championship – #2 of only 88 Made. ?: $1150. ?? 100% milled collectors item from the limited releases commemorating when Ping putters won every major in 1988 (88 putters made). This was the model Seve Ballesteros used to win the 1988 Open Championship. Condition is brand new, never gamed, everything is in the original packaging as it came. Putter features the iconic sound slot.
Specs/ Additional Details
-100% Milled, Aluminum/Bronze Alloy (310g)
-Original Anser Design
-PING PP58 Grip
-Putter is built to standard specs.”
To check out the full listing in our BST forum, head through the link: Ping PLD Limited Anser – 1988 Open Championship – #2 of only 88 Made
This is the most impressive current listing from the GolfWRX BST, and if you are curious about the rules to participate in the BST Forum you can check them out here: GolfWRX BST Rules
- LIKE1
- LEGIT0
- WOW0
- LOL0
- IDHT0
- FLOP0
- OB0
- SHANK0
As you probably know by now, Collin Morikawa switched putters after the first round of The Masters, and he ultimately went on to finish T3.
The putter was far from the only change he made last week, however, and his bag is continuing to change this week at the 2024 RBC Heritage.
On the range of The Masters, Morikawa worked closely with Adrian Reitveld, TaylorMade’s Senior Manager of Tour at TaylorMade, to find the perfect driver and 3-wood setups.
Morikawa started off 2024 by switching into TaylorMade’s Qi10 Max driver, but since went back to his faithful TaylorMade SIM – yes, the original SIM from 2020. Somehow, some way, it seems Morikawa always ends up back in that driver, which he used to win the 2020 PGA Championship, and the 2021 Open Championship.
At The Masters, however, Rietveld said the duo found the driver head that allowed “zero compromise” on Morikawa’s preferred fade flight and spin. To match his preferences, they landed on a TaylorMade Qi10 LS 9-degree head, and the lie angle is a touch flatter than his former SIM.
“It’s faster than his gamer, and I think what we found is it fits his desired shot shape, with zero compromise” Rietveld told GolfWRX.com on Wednesday at the RBC Heritage.
Then, to replace his former SIM rocket 3-wood, Morikawa decided to switch into the TaylorMade Qi10 core model 13.5-degree rocket head, with an adjustable hosel.
“He likes the spin characteristics of that head,” Rietveld said. “Now he’s interesting because with Collin, you can turn up at a tournament, and you look at his 3-wood, and he’s changed the setting. One day there’s more loft on it, one day there’s less loft on it. He’s that type of guy. He’s not scared to use the adjustability of the club.
“And I think he felt our titanium head didn’t spin as low as his original SIM. So we did some work with the other head, just because he liked the feel of it. It was a little high launching, so we fit him into something with less loft. It’s a naughty little piece of equipment.”
In addition to the driver and fairway wood changes, Morikawa also debuted his new “MySymbol” jersey No. 5 TP5x golf ball at The Masters. Morikawa’s choice of symbols is likely tied to his love of the Los Angeles Dodgers baseball team.
Not enough changes for you? There’s one more.
On Wednesday at the 2024 RBC Heritage, Morikawa was spotted with a new TaylorMade “Proto” 4-iron in the bag. If you recall, it’s the same model that Rory McIlroy debuted at the 2024 Valero Texas Open.
According to Morikawa, the new Proto 4-iron will replace his old P-770 hollow-bodied 4-iron.
“I used to hit my P-770 on a string, but sometimes the distance would be a little unpredictable,” Morikawa told GolfWRX.com. “This one launches a touch higher, and I feel I can predict the distance better. I know Rory replaced his P-760 with it. I’m liking it so far.”
See Morikawa’s full WITB from the 2024 RBC Heritage here.
- LIKE56
- LEGIT7
- WOW2
- LOL6
- IDHT2
- FLOP4
- OB3
- SHANK6
Dave Portnoy places monstrous outright bet for the 2024 Masters
John Daly stuns fans into silence with brutal opening tee shot on PGA Tour Champions
Things got heated at the Houston Open between Tony Finau and Alejandro Tosti. Here’s why
Tiger Woods arrives at 2024 Masters equipped with a putter that may surprise you
Scottie Scheffler WITB 2024 (March)
Report: Tiger Woods has ‘eliminated sex’ in preparation for the 2024 Masters
Two star names reportedly blanked Jon Rahm all week at the Masters
2-time major champ announces shock retirement from the sport at age of 33
Neal Shipley presser ends in awkward fashion after reporter claims Tiger handed him note on 8th fairway
Paulina Gretzky opens up on receiving death threats following DJ’s move to LIV Golf
Collin Morikawa WITB 2024 (April)
Collin Morikawa what’s in the bag accurate as of the RBC Heritage. More photos from the event here. Driver: TaylorMade...
WITB Time Machine: Jordan Spieth’s winning WITB, 2022 RBC Heritage
At the 2022 RBC Heritage Jordan Spieth defeated Patrick Cantlay on the first playoff hole after nearly holing his greenside...
Jason Day WITB 2024 (April)
Jason Day what’s in the bag accurate as of the RBC Heritage. Driver: Ping G430 LST (9 degrees @10) Shaft: TPT...
Ludvig Åberg WITB 2024 (April)
Ludvig Åberg what’s in the bag accurate as of the RBC Heritage. Driver: Titleist TSR2 (9 degrees, D4 SureFit setting)...
-
19th Hole1 week agoDave Portnoy places monstrous outright bet for the 2024 Masters
-
19th Hole3 weeks agoThings got heated at the Houston Open between Tony Finau and Alejandro Tosti. Here’s why
-
19th Hole1 week agoTiger Woods arrives at 2024 Masters equipped with a putter that may surprise you
-
19th Hole2 weeks agoReport: Tiger Woods has ‘eliminated sex’ in preparation for the 2024 Masters
-
19th Hole5 days agoTwo star names reportedly blanked Jon Rahm all week at the Masters
-
19th Hole4 days agoNeal Shipley presser ends in awkward fashion after reporter claims Tiger handed him note on 8th fairway
-
19th Hole3 days agoReport: LIV Golf identifies latest star name they hope to sign to breakaway tour
-
19th Hole2 weeks agoAddiction, spinal fusion, and scam artists – Everything Anthony Kim revealed in candid interview with David Feherty
Nevin
May 24, 2015 at 7:39 pm
I played with two friends who have these in their bags now. Both are extremely happy with them and they are clearly spinning it more with these grooves. I think I’ll keep my SCOR’s for now but the do look and feel great.
Desmond
Apr 19, 2015 at 4:13 am
The insert gives it an odd look at address. The grooves should extend more outwards towards the toe so you actually hit a groove when opening the club face. TM can’t hit a home run with wedges… they are always fishing.
Gary
Apr 10, 2015 at 1:26 pm
I am very much into the Cally Mack Daddy 2 wedges and also like the Vokey SM5 very much. If the spin on these wedges is pretty good and the grooves are indeed long lasting, would have to say they would be very much worth a try. Hopefully the feel would be pretty decent too.
MRC
Apr 8, 2015 at 11:22 pm
Sticking w my Mizuno wedges….their forged.
Ken N
Apr 8, 2015 at 6:39 pm
While I like the overall look of the wedge on the back, I can’t help but look at the insert on the face and think “plastic insert.” Maybe it’s because there’s a tiny space between the bottom edge of the face and the insert, but the thing just doesn’t look clean to me. I suppose I expected better execution from TaylorMade. But if it’s good enough for DJ, shouldn’t it be good enough for us (a)’s? I just wonder, if he wasn’t bound to contractual obligations, which wedges would he choose from Titleist, Cleveland, Ping, etc?
Tom Duckworth
Apr 7, 2015 at 4:26 pm
Really like the finish. It sounds like a good idea I’m not a TM guy but not a hater. I would give them a honest try. I like the ATV grind on a 58 or 60.
Tom Stickney
Apr 7, 2015 at 1:05 am
Have them in my bag…flatter trajectory as well.
Jason
Apr 7, 2015 at 11:26 pm
I wouldn’t think most of us average golfers would need a flatter trajectory, especially with a wedge. Is that a good thing in your case?
Dan
Apr 6, 2015 at 9:29 pm
Not that it has anything to do with the wedges, but DJ lost the Northern Trust Open in a playoff to James Hahn.
Jeffrey Trigger
Apr 7, 2015 at 12:56 am
So, you’re saying he has a second place, to go with his first place, and his sixth place, and his top ten world ranking…
Gary
Jun 8, 2015 at 7:11 pm
DJ played great in that tournament but the winner hit two great putts in the playoff.
Gubment Cheez
Apr 6, 2015 at 6:29 pm
These wedges are junk
Might as well be pinemeadow
R
Apr 6, 2015 at 5:20 pm
The science, rather chemistry, is far from complicated. It’s a very simple “positive is attracted to negative” process.
Matt
Apr 6, 2015 at 3:35 pm
Nothing bad to say about these, love the finish and how they seem to sit at address from the pictures. Props TM, thumbs up from me
Chuck
Apr 6, 2015 at 1:10 pm
Very nice looking wedges. Props to TM on some very thoughtful design.
I still wish I knew why TM gave up on its old replaceable-face wedge designs. I never bought one; I never even played with one! But I always admired it as a good design idea. It came and went so fast, I just never found the opportunity to try one.
sgniwder99
Apr 6, 2015 at 4:47 pm
Some of their tour guys still use them, too.
christian
Apr 7, 2015 at 4:38 am
Still? Are they an old model or?
Chuck
Apr 7, 2015 at 3:18 pm
Yeah, an old design. From about 2010-11. I seem to recall their being around for about two years or so. Cleverly built, such that you could use the standard TM hosel torque wrench to replace faces. Here’s the great Wade Liles from the TM tour van way back in 2009(!):
https://www.youtube.com/watch?v=COPH6spfiKw
I always had a sneaking suspicion that both the introduction and the discontinuation had something to do with the 2010 groove rule. If I recall correctly, they came into the marketplace when the groove rule had been passed but had not yet gone into effect. Then there would have been the issue of whether you were using a conforming-groove wedge. Were the replacement faces marked for conformity? I don’t recall. Obviously, that is the whole idea, conforming or not; to be able to keep a wedge whose weight and shape and bounce and shaft were all perfect for you, but the grooves were worn out. So just replace the face. Still seems like a pretty cool idea to me.