Connect with us

Equipment

Spotted: TaylorMade’s 2017 M1 Fairway Woods and Hybrids

Published

on

A slot and a sliding weight? That’s what we’re seeing in a photo of a new TaylorMade M1 fairway wood, which is making the rounds in our forum after being posted on Instagram by an account associated with custom club maker TourQualityGolf in Broken Arrow, Oklahoma.

The photo of the fairway wood, which presumably is part of TaylorMade’s 2017 line, has the same graphics and color scheme as the M1 460 driver that appeared yesterday on social media.

The photo of the new driver was revealing because it indicates that TaylorMade will use more carbon fiber in the design of its 2017 drivers. While the new M1 fairway wood does not appear to use carbon fiber in the same way, there are some noteworthy changes.

TaylorMade_M1_fairway_2015_2017

For one, the fairway wood’s sliding-weight track has been moved to the rear of the sole. In previous models, the M1 and the R15, a front weight track was used. According to TaylorMade, the front weight track created a low, forward center of gravity that encouraged the high-launching, low-spinning ball flight most golfers want from a fairway wood. With the weight track moved rearward, it’s clear that TaylorMade has found other means of moving the necessary amount of weight low and forward in the clubhead.

The rearward weight track also allowed TaylorMade to add a slot to the front of the club sole, a design strategy the company has been employing since its debut of the RBZ fairway woods in 2011. The slot is of the flat, handle bar-shaped variety used on TaylorMade’s M1 hybrids that were released in 2015. It is said to increase the flexibility of a club face, leading to increased ball speed, a higher launch angle and reduced spin, particularly on shots contacted low on the club face.

TaylorMade_M1_hybrid_2017

A photo of TaylorMade’s 2017 M1 hybrid posted in our forum by user Ricky Ross shows that the company’s new hybrids will likely take the same approach as the company’s new fairway woods. It also appears to employ a rear sliding weight track and a flat, handle bar-shaped slot on the front of the sole.

Your Reaction?
  • 150
  • LEGIT22
  • WOW153
  • LOL12
  • IDHT0
  • FLOP5
  • OB6
  • SHANK95

24 Comments

24 Comments

  1. suhdude

    Nov 14, 2016 at 2:12 pm

    taylorlame. sorry bruh.

  2. Rimjob

    Nov 3, 2016 at 3:05 am

    The slot of the Jetspeed with the added adjustability. Best of both worlds. These are gonna be heaters

  3. Mats B

    Nov 2, 2016 at 6:33 am

    One of the first Equipment signs that Adidas and Nike are discussing an Equipment deal with Nike as a new owner of Taylor Made. Look at the yellow/green colour of the 1 in M1. Same och very simular to the one used by Nike. The fact that McIlroy and Koepka has made a move to Taylor Made Woods is just adding to the fact that soon Taylor Made will be under new wings…..

    • Rimjob

      Nov 2, 2016 at 2:19 pm

      Nah. But this comment is an indication that you’re an idiot

    • Yawn

      Nov 2, 2016 at 9:54 pm

      Cut n pasting your own dribble?
      Good effort.

    • TomyD

      Nov 3, 2016 at 2:41 am

      It’s Lime not Volt… and why would they stop golf equipment to focus on clothes/shoes and buy a equipment brand few weeks later which is on sale for the same reason they cut their production… make no sense.

      • Mats B

        Nov 3, 2016 at 6:32 pm

        Tomy,
        Who knows!? There’s more than one way to get to the Top! After 15 years of trying to be one of the big brands without being successful even though they had one of the greatest Sport stars in their team and then went on to sign McIlroy without any added success. I guess then it’s time for a change of direction. Even though Taylor Made has flooded the market with new equipment launches, using a 6 months lifetime cycle, they still remain in the very front edge of performance, especially on their woods, where they outperform most, if not all of the competition…..no further explanation needed….Adidas has had it for sale for quite some time now and I think it’s getting to a point where they have to let it go for a bargain, compared to what they expected. I think that Nike has made their fair share of calculations and this can be the right time to make a move and get straight to the Top, quicker and with a lot less effort than continuing to knock their own head’s into a concrete wall! I guess we’ll have to wait and see!? I may be wrong!? But I wouldn’t be surprised if Nike will be involved somehow in Taylor Made in the future. 🙂

  4. FNM

    Nov 2, 2016 at 2:43 am

    I am going to murder that 3wood, I know I will

  5. JThunder

    Nov 2, 2016 at 12:36 am

    Actually M1 was just over a year ago, and M2 was end of Jan 2016. That’s only “dialed back” for TM, still fast for anyone else.

  6. Clay

    Nov 1, 2016 at 10:45 pm

    That hybrid looks awful. I was looking for words like Talor-Fit. It looks like a Chinese knock off of an actual hybrid.

  7. M1 Smizzle

    Nov 1, 2016 at 4:31 pm

    They look sweet!

  8. rechlo67

    Nov 1, 2016 at 1:47 pm

    If that 3 wood has a combination between the M2 (front slot) and M1 (track) that thing is going to be ridiculously hot.

  9. Dat

    Nov 1, 2016 at 11:35 am

    M1 Hybrids are gonna require a clean pick of the ball…if you have a less than ideal strike or lie the weight track will be a mud track.

  10. Chris

    Nov 1, 2016 at 11:20 am

    Any idea if the weight on the sliding weights is heavier or lighter than the 2016 M1?

  11. mitch

    Nov 1, 2016 at 9:55 am

    why do they need new woods out already! they just keep flooding the market!

    • Sean

      Nov 1, 2016 at 10:02 am

      If they dont release until after the pga show the driver would have had a full two year cycle. Callaway and other companies have flooded more in that time period. Just saying

      • Alan

        Nov 1, 2016 at 10:39 am

        How can it be a full 2 year cycle when the original M1 was unveiled and launched in September 2015?

      • Shooters Tour

        Nov 1, 2016 at 10:42 am

        …word.

    • cgasucks

      Nov 1, 2016 at 10:09 am

      They’ve actually dialed back the release frequency. The last time they debuted new woods was a year ago and will continue to dial back its offerings, especially since it’s up for sale and don’t want to scare off any potential buyers that they’re back to their old ways (which got them in trouble in the first place).

    • rolltherock

      Nov 1, 2016 at 10:36 am

      Calm down Mitch

    • SteveID

      Nov 1, 2016 at 12:04 pm

      Mitch, does it affect you at all?

      • mitch

        Nov 1, 2016 at 12:24 pm

        I guess time just flies and it seems like it has not been as long that they have been out idk..

Leave a Reply

Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Whats in the Bag

Kris Kim WITB 2024 (May)

Published

on

Driver: TaylorMade Qi10 (9 degrees @7)
Shaft: Mitsubishi Tensei 1K White 60 TX

3-wood: TaylorMade Qi10 Tour (15 degrees @13.5)
Shaft: Mitsubishi Diamana WB 73 TX

Irons: TaylorMade P770 (2, 4), TaylorMade P7MB (5-PW)
Shafts: Mitsubishi Tensei 1K White 80 TX (2), Nippon N.S. Pro Modus3 Tour 120 X

Wedges: TaylorMade MG4 (50-09SB, 56-12SB, 60-11TW)
Shafts: Nippon N.S. Pro Modus3 WV 125

Putter: TaylorMade Spider Tour

Grips: Golf Pride Tour Velvet Cord

Check out more in-hand photos of Kris Kim’s equipment here.

 

View this post on Instagram

 

A post shared by GolfWRX (@golfwrx)

Your Reaction?
  • 0
  • LEGIT0
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

Equipment

Welcome to the family: TaylorMade launches PUDI and PDHY utility irons

Published

on

TaylorMade is continuing its UDI/DHY series with the successor to the Stealth UDI and DHY utility irons: PUDI and PDHY (which the company styles as P·UDI and P·DHY). TaylorMade is folding the designs in with its P Series of irons.

TaylorMade outlined the process of developing its new utilities this way. The company started with the data on utility iron usage. Not surprisingly, better players — i.e. those who generate more clubhead speed and strike the ball more precisely — were found to gravitate toward the UDI model. DHY usage, however, covered a wider swath than the company might have expected with six-to-18 handicappers found to be bagging the club.

TaylorMade also found that the majority of golfers playing UDI or DHY utilities were playing P Series irons at the top of their iron configurations.

Can you see where this is going?

Matt Bovee, Director of Product Creation, Iron and Wedge at TaylorMade: “As we look to the future, beyond the tech and the design language, we are excited about repositioning our utility irons into the P·Series family. P·UDI is an easy pair for players that currently play P·Series product and P·DHY is an extremely forgiving option for players of all skill levels. It is a natural fit to give these players the performance in this category that they are looking for.”

 

View this post on Instagram

 

A post shared by GolfWRX (@golfwrx)

TaylorMade PUDI

TaylorMade PUDI technology cutaway (via TaylorMade)

Crafted with tour player input, TaylorMade sought to develop a confidence-inspiring utility iron that blends with the rest of the P Series irons. Also of note: Interestingly, the PUDI has a more compact head than the P790.

In comparison to past UDI products, the PUDI has a more traditional iron shape, slimmer toplines, and less offset with a little of the backbar visible at address.

TaylorMade PDHY

TaylorMade PDHY tech cutaway (via TaylorMade).

Larger in profile than the PUDI, the PDHY seeks to position center of gravity (CG) lower in the club for ease of launch. The toe height is larger and the profile is larger at address — roughly five millimeters longer than PUDI — the sole of the club is wider for improved forgiveness.

Club Junkie’s take

Golfers who feel like they are missing something at the top of the bag could find the PUDI or PDHY a great option. The look of the PUDI should fit the most discerning eye with a more compact look, less offset, and a thinner topline. If you want a little more confidence looking down the P-DHY will be slightly larger while still being a good-looking utility iron.

For being small packages both models pack a pretty good punch with fast ball speeds, even off-center. The feel is soft and you get a solid feel of the ball compressing off the face when you strike it well. Your ears are greeted with a nice heavy thud as the ball and club come together. The PDHY will launch a little higher for players who need it while the PUDI offers a more penetrating ball flight. Both utility irons could be the cure for an open spot in the top end of the bag.

PUDI, PDHY, or Rescue?

TaylorMade offers the following notes to assist golfers in filling out their bags:

  • PUDI has mid-CG right behind the center face to create a more penetrating mid-to-low ball flight
  • PDHY has a lower center of gravity to produce an easier-to-launch mid-to-high ball flight.
  • Both PUDI and PDHY are lower-flying than the company’s hybrid/Rescue clubs.
  • PUDI is more forgiving than P790.
  • PDHY is the most forgiving iron in the entire TaylorMade iron family

Pricing, specs, and availability

Price: $249.99

At retail: Now

Stock shafts: UST Mamiya’s Recoil DART (105 X, 90 S and 75 R – only in PDHY)

Stock grip: Golf Pride’s ZGrip (black/grey)

PUDI lofts: 2-17°, 3-20°, 4-22° in both left and right-handed

PDHY lofts: 2-18°, 3-20° and 4-22° in both left and right-handed

Your Reaction?
  • 12
  • LEGIT4
  • WOW3
  • LOL2
  • IDHT1
  • FLOP1
  • OB1
  • SHANK2

Continue Reading

Equipment

Coolest thing for sale in the GolfWRX Classifieds (5/3/24): Scotty Cameron Champions Choice 2.5+ putter

Published

on

At GolfWRX, we are a community of like-minded individuals that all experience and express our enjoyment of the game in many ways.

It’s that sense of community that drives day-to-day interactions in the forums on topics that range from best driver to what marker you use to mark your ball. It even allows us to share another thing we all love – buying and selling equipment.

Currently, in our GolfWRX buy/sell/trade (BST) forum, there is a listing for a Scotty Cameron Champions Choice 2.5+ putter

From the seller: (@wwcl): “Has been gamed as pics show. 33.5 includes original h/c and grip. $575 includes shipping and PP fees.”

To check out the full listing in our BST forum, head through the link: Scotty Cameron Champions Choice 2.5+ putter

This is the most impressive current listing from the GolfWRX BST, and if you are curious about the rules to participate in the BST Forum you can check them out here: GolfWRX BST Rules

Your Reaction?
  • 1
  • LEGIT1
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

WITB

Facebook

Trending