Equipment
Edison Forged wedges offer performance for everyone
Terry Koehler is a wedge guy—and today, he officially announces the launch of Edison Forged wedges, the first product from the new Edison Golf Company.
Born from the concept that most wedges on the market don’t benefit the average golfer, Koehler has been on a mission to bring significant technology and innovation to wedges since his initial introduction to the wedge space in the mid-90s. The new Edison forged wedges combine years of experience and design into a club that can offer a tangible improvement in distance control and consistency for every player compared to a traditionally designed tour-style wedge, according to the company.
A shift in design philosophy
Edison Forged wedges look different because they are different. Compared to traditional tour-style wedges that place the majority of mass low in the clubhead, Edison wedges move more mass higher in the head and around the perimeter to increase MOI and consistency on shots hit around the face. Traditional wedges with low center of gravity (CG), cause shots to launch higher and with less spin—that might work for modern drivers, but it’s not something you want in your short game.
Amateur golfers’ largest struggle is consistent face contact. Professional golfers at the highest skill level, on the other hand, can benefit from traditional wedge designs by controlling exactly where the ball makes contact on the face to hit desired trajectories and vary spin. This variability in spin is something that amateur golfers don’t need in their games.
Terry Koehler:
“Tour professionals spend thousands of hours honing their exquisite skills. They have perfected those skills with wedges that really haven’t changed much in decades. I think there are complex reasons why wedges haven’t experienced the same technical revolutions we’ve seen in every other category”
The other difference is the signature TK Sole. The sole has been refined over the years to be as versatile as possible and eliminate the consumer confusion around trying to select just the right grinds for swing and turf conditions. Koehler’s design philosophy is that since turf conditions can vary greatly throughout the season, course to course, and shot to shot, a sole design needs to be able to handle anything you can throw at it. The rear portion of the sole has been given a huge amount of relief to make it lower bounce so it can handle tight lies, firm turf, and shallow swing paths. However, the leading portion of the sole has a high bounce, so that same wedge can handle softer lies and steeper swings.
“Very simply, it takes all that confusion and worry about bounce and throws it right out the window.” – Terry Koehler
Lasting consistency is the final part to this wedge spin equation. Edison Forged are pushing the limits of wedge face and groove design by fly-cutting the face to perfect flatness, then CNC-milling progressive grooves with varying width, depth, spacing, and wall angle. The company then adds a unique “X pattern” etching between the grooves to “push the wedge to USGA limits.”
The proof
Edison Golf doesn’t just want you to take your word for what they are promising with performance. They are offering up the Forged wedges have been proven by independent robotic testing to give you more penetrating trajectories (2-4 degrees lower than ‘tour design’ wedges), dramatically improved spin because of improved gear effect and more distance out of your mishits, particularly those high-face impacts that cost us strokes. The data can be seen below.
Edison Forged wedges: Specs and availability
Edison Forged wedges will come stock in lofts from 45 to 63 degrees in odd numbers only, starting in the spring of 2020, and currently only in right-handed.
Stock shaft offerings are from KBS including the KBS Tour, Tour 105, and Tour Graphite.
Special Offer
Edison is offering specially marked “One of 500” pre-production sets for pre-purchase through the Company’s website at www.EdisonWedges.com. Golfers that purchase one of these limited edition sets will be enrolled in the “Edison 500 Club”, and will receive a suite of special treatment, beginning with a package of Edison logo’d gifts, and includes special Ambassador status where these select Edison wedge owners can earn rewards and incentives for referring their friends to Edison Golf.
- LIKE96
- LEGIT8
- WOW3
- LOL5
- IDHT1
- FLOP5
- OB4
- SHANK22
Equipment
Limited-edition gear spotted at the PGA Championship
The second major of the season is here, and with it, custom gear aplenty! Taking inspiration from both Louisville, Kentucky, and host course Valhalla, the OEMs have been having some fun with the designs.
Check out PGA Championship staff bags, some custom kicks, and a very cool putter grip from SuperStroke.
2024 PGA Championship staff bags
Callaway
PGA Championship Staff Bag Giveaway ? See below how you can win the bag and headcovers being used this week by #TeamCallaway at the second major of the year:
-Follow @callawaygolf
-Tag 2 friends in the comments pic.twitter.com/8HbGdPHiFK— Callaway Golf (@CallawayGolf) May 13, 2024
Cobra
TaylorMade
From the stables to the fairway. ?
This year’s PGA Championship staff bag and accessories pay homage to the Derby City with callouts to the run for the roses, the fastest lap in track history and more.
Dive into all the details of this beauty: https://t.co/afhEVKHWLj pic.twitter.com/8eoP6tDZq1
— TaylorMade Golf (@TaylorMadeGolf) May 13, 2024
Scotty Cameron’s putter cover features the Scotty Dog in Viking helmet
Bettinardi’s KFC-inspired putter covers
Ping’s bourbon-inspired putter cover
Rory McIlroy’s Kentucky Bourbon Trail-inspired Nike Air Zoom Victory Tour 3 shoes
FootJoy x Todd Snyder Mint Julep Premier Series
Brooks Koepka’s Kentucky Bourbon Trail-inspired Nike Air Zoom Infinity Tour shoes
SuperStroke’s PGA Championship grip
Check out all of our photos from Valhalla here.
- LIKE0
- LEGIT0
- WOW0
- LOL0
- IDHT0
- FLOP0
- OB0
- SHANK0
Whats in the Bag
John Daly WITB 2024 (May)
- John Daly WITB accurate as of the PGA Championship. More photos from the event here.
Driver: Ping G430 LST (9 degrees)
Shaft: Newton Motion 6-Dot
3-wood: Ping G430 LST (15 degrees)
Shaft: Newton Motion 4-Dot
Hybrids: Ping G430 (17, 22, 26 degrees)
Shafts: True Temper Dynamic Gold
Irons: Sub70 659-CB (6-PW)
Shafts: True Temper Dynamic Gold S300
Wedges: Sub70 TAIII (50, 54, 60)
Shafts: True Temper Dynamic Gold S300
Putter: Odyssey Ai-One Milled One T CH
Grip: SuperStroke Zenergy Tour 2.0
Grips: SuperStroke custom
More photos of John Daly’s WITB in the forums.
View this post on Instagram
- LIKE6
- LEGIT0
- WOW1
- LOL0
- IDHT0
- FLOP0
- OB0
- SHANK0
Equipment
Toulon Golf collaborates with Valhalla Golf Club for latest Small Batch putter
Toulon Golf has today officially announced its latest Small Batch putter — the Valhalla.
Discussing the putter, Preston Toulon of Toulon Golf said: “This putter is a collaboration with the club at Valhalla and incorporates three of the many things that make the state of Kentucky great – horseracing, bourbon and championship golf. The head of the putter and headcover have several allusions to a jockey’s silk and there are thoroughbreds on the sole.”
Inspired by Toulon’s classic tri-sole Santa Monica design, the company sought to modernize the profile and design leveraging its 904 stainless steel and 6061 aircraft aluminium across the sole. Toulon describes the Valhalla’s profile as “slightly oversized blade whose proportions are meticulously balanced to maintain the look and feel of the Santa Monica, while increasing the putter’s inertia to create one of the most forgiving putters we have ever designed.”
Throughout numerous prototypes, Toulon paid particular attention to the L-neck, with its full shaft of offset, adding a bit of length for better blending with the slightly wider and longer blade.
On the rear of the putter are homages to horse racing in the form of jockey silk diamonds and Churchill Downs-inspired font.
The sole of the putter features a large cavity covered by a 6061 aircraft aluminum sole plate. According to Toulon, this allowed for the addition length to the putter and improved inertia as well as moving more mass to the perimeter for greater forgiveness.
In another nod to Valhalla, Toulon uses a milled watermarked limestone pattern, a reference to stone featured widely on the property.
As with all the Toulon Small Batch putters, the team paid particular attention to the topline thickness and radius to achieve a desired look. “Soft yet crisp was the design intent,” according to the company.
Toulon Golf Small Batch Valhalla specs
- Material: 904L Stainless Steel/6061 Aluminum Sole
- Face Mill: Fine Double Fly with Big Tuna
- Finish: Kentucky Bourbon PVD
- Grip: Custom Toulon Collection Vintage Blue Pistol
- Shaft: Chrome Stepless Steel
- Headcover: Valhalla Custom Leather
- Head Weight: 355 g
- Toe Hang: 40 degrees
- Loft: 3 degrees
- Lie: 70 degrees
Pricing and availability
The Small Batch Valhalla is available for purchase today via the company’s website — ToulonGolf.com.
Supply is extremely limited. The price is $1,800.
- LIKE0
- LEGIT0
- WOW0
- LOL0
- IDHT0
- FLOP0
- OB0
- SHANK0
-
19th Hole3 weeks ago
LET pro gives detailed financial breakdown of first week on tour…and the net result may shock you
-
19th Hole1 week ago
Report: LIV star turns down PGA Championship invite due to ‘personal commitments’
-
19th Hole2 weeks ago
Gary Player claims this is what ‘completely ruined’ Tiger Woods’ career
-
Equipment1 week ago
Details on Justin Thomas’ driver switch at the Wells Fargo Championship
-
Whats in the Bag2 weeks ago
Team McIlowry (Rory McIlroy, Shane Lowry) winning WITBs: 2024 Zurich Classic
-
Whats in the Bag1 week ago
Keegan Bradley WITB 2024 (May)
-
Equipment2 weeks ago
Golf fans left surprised by LIV’s choice of course for its 2024 individual championship event
-
Equipment2 weeks ago
Why Wesley Bryan is playing two 4-irons this week
Pingback: Edison Golf launches new Edison 2.0 wedges - Fly Pin High
Pingback: Edison Golf launches new Edison 2.0 wedges – GolfWRX
Unitzero
Jul 2, 2020 at 11:36 am
Fat chance they’ll be for “everyone “, lefty’s left out yet again!
myron miller
Dec 6, 2019 at 9:18 pm
Will they be as hard to hit as the SCOR sand wedges are? 52 and 60 are easy to hit in most situations but the 56 is really tough to hit consistantly in heavy sand. Even Scor’s regional rep had lots of trouble with the 56. I could hit it in the rough but never consistently in the sand.
Jed Barish
Dec 6, 2019 at 4:13 pm
I ordered it because I am a believer in his wedges. I love his design with SCOR Golf and been waiting for Terry to come up with a new one 🙂 Hope I’ll be ok with KBS Tour S shaft. Congrats on the comeback!
Kevin
Dec 5, 2019 at 10:58 pm
Excited for these. Thanks Terry
chip75
Dec 5, 2019 at 6:10 pm
Mentions that current wedges are designed for exceptionally skilled tour players, then backs up their wedge is best with robot testing. Is that irony? I think that’s irony.
Maybe show the data capture from average players?
They do look nice.
Terry B Koehler
Dec 5, 2019 at 6:30 pm
Hello Chip, I can see where you might see irony in the robotic testing, but let me explain the process. With the robot, we can precisely replicate contact at five different points on the face, so that we can quantify the variance in smash factor and all other performance aspects. What we set out to do, and achieved, is the most consistent smash factor around the face, so that you get more consistent results from your slight mishits. I hope that clears up the irony?
Thank you.
Terry Koehler
chip75
Dec 5, 2019 at 9:24 pm
Hi Terry. It was something I found amusing, that current wedges were designed for near perfect ball-strikers to your wedges getting tested by a perfect one.
The problem with robot testing is that the results are rarely repeatable (or relatable) to human testing. If we continually hit high toe pitches short due to the the drop-off in efficiency, we’ll eventually start adding speed, we’re constantly making adjustments, robots don’t, they just repeat results. I understand the allure of robot testing (it’s something I find fascinating (the testing itself), as human testing is by its very nature extremely variable.
Anyway, I look forward to seeing reviews, the wedges look great, and I appreciate the post.
Bifule
Dec 5, 2019 at 4:08 pm
If I don’t see these on the USGA conforming club list currently does that mean they have not gone through the approval process to be legal for tournament use?
Terry Koehler
Dec 5, 2019 at 6:32 pm
We will be submitting production articles to the USGA to be measured for the conforming list as we get into regular production. We assure you they will be made to conform to all USGA specifications and be conforming.
C
Dec 5, 2019 at 3:38 pm
Will there be discrete bounce angles between lofts? Or are the clubs bent to a loft within each loft group, thereby changing the bounce angles?
Allen
Dec 5, 2019 at 2:55 pm
Not for everyone…there are no lefty models yet! Maybe next year.
DB
Dec 5, 2019 at 1:57 pm
They look really nice actually. I’m a little confused because the picture shows 58 but the article says odd numbers only. Then the website is selling only the special edition set that is 51-55-59.
Dennis Corley
Dec 5, 2019 at 1:51 pm
No pricing provided. I went to the website and understand why. Are you kidding?
—————–
“One of 500” – Special Edition of EDISON FORGED Wedges
Regular price
$537.00
Shipping calculated at checkout.
—————-
I suppose there is no end to the madness.
Cody
Dec 5, 2019 at 2:43 pm
Looks like it’s for a set of 3 wedges. Pricey, but so are Vokeys.
cody
Dec 5, 2019 at 5:56 pm
I guess he didnt learn his lesson with Hogan…
Oh well these will be gone soon too.
Barrett
Dec 6, 2019 at 1:52 pm
In all fairness, that price is only to get in to their “500 Club”. I’m sure the wedges will cost less than $180 when they are available to the general public.
Randy Siedschlag
Sep 29, 2020 at 9:50 am
Still $179 so I don’t think so sadly. If these we $100-125 range I’d pull the trigger now.
C
Dec 5, 2019 at 1:37 pm
“Edison Forged wedges will come stock in lofts from 45 to 63 degrees in odd numbers only”
…shows picture of 58.
Ben Alberstadt
Dec 5, 2019 at 3:22 pm
The photos are of wedges that were built to even-numbered specs for testing purposes. Same wedges as will be at retail, save for the 1-degree loft differences.