Equipment
Edison Forged wedges offer performance for everyone
Terry Koehler is a wedge guy—and today, he officially announces the launch of Edison Forged wedges, the first product from the new Edison Golf Company.
Born from the concept that most wedges on the market don’t benefit the average golfer, Koehler has been on a mission to bring significant technology and innovation to wedges since his initial introduction to the wedge space in the mid-90s. The new Edison forged wedges combine years of experience and design into a club that can offer a tangible improvement in distance control and consistency for every player compared to a traditionally designed tour-style wedge, according to the company.
A shift in design philosophy
Edison Forged wedges look different because they are different. Compared to traditional tour-style wedges that place the majority of mass low in the clubhead, Edison wedges move more mass higher in the head and around the perimeter to increase MOI and consistency on shots hit around the face. Traditional wedges with low center of gravity (CG), cause shots to launch higher and with less spin—that might work for modern drivers, but it’s not something you want in your short game.
Amateur golfers’ largest struggle is consistent face contact. Professional golfers at the highest skill level, on the other hand, can benefit from traditional wedge designs by controlling exactly where the ball makes contact on the face to hit desired trajectories and vary spin. This variability in spin is something that amateur golfers don’t need in their games.
Terry Koehler:
“Tour professionals spend thousands of hours honing their exquisite skills. They have perfected those skills with wedges that really haven’t changed much in decades. I think there are complex reasons why wedges haven’t experienced the same technical revolutions we’ve seen in every other category”
The other difference is the signature TK Sole. The sole has been refined over the years to be as versatile as possible and eliminate the consumer confusion around trying to select just the right grinds for swing and turf conditions. Koehler’s design philosophy is that since turf conditions can vary greatly throughout the season, course to course, and shot to shot, a sole design needs to be able to handle anything you can throw at it. The rear portion of the sole has been given a huge amount of relief to make it lower bounce so it can handle tight lies, firm turf, and shallow swing paths. However, the leading portion of the sole has a high bounce, so that same wedge can handle softer lies and steeper swings.
“Very simply, it takes all that confusion and worry about bounce and throws it right out the window.” – Terry Koehler
Lasting consistency is the final part to this wedge spin equation. Edison Forged are pushing the limits of wedge face and groove design by fly-cutting the face to perfect flatness, then CNC-milling progressive grooves with varying width, depth, spacing, and wall angle. The company then adds a unique “X pattern” etching between the grooves to “push the wedge to USGA limits.”
The proof
Edison Golf doesn’t just want you to take your word for what they are promising with performance. They are offering up the Forged wedges have been proven by independent robotic testing to give you more penetrating trajectories (2-4 degrees lower than ‘tour design’ wedges), dramatically improved spin because of improved gear effect and more distance out of your mishits, particularly those high-face impacts that cost us strokes. The data can be seen below.
Edison Forged wedges: Specs and availability
Edison Forged wedges will come stock in lofts from 45 to 63 degrees in odd numbers only, starting in the spring of 2020, and currently only in right-handed.
Stock shaft offerings are from KBS including the KBS Tour, Tour 105, and Tour Graphite.
Special Offer
Edison is offering specially marked “One of 500” pre-production sets for pre-purchase through the Company’s website at www.EdisonWedges.com. Golfers that purchase one of these limited edition sets will be enrolled in the “Edison 500 Club”, and will receive a suite of special treatment, beginning with a package of Edison logo’d gifts, and includes special Ambassador status where these select Edison wedge owners can earn rewards and incentives for referring their friends to Edison Golf.
- LIKE96
- LEGIT8
- WOW3
- LOL5
- IDHT1
- FLOP5
- OB4
- SHANK22
Equipment
Coolest thing for sale in the GolfWRX Classifieds (4/18/24): TaylorMade BRNR mini driver head
At GolfWRX, we are a community of like-minded individuals that all experience and express our enjoyment of the game in many ways.
It’s that sense of community that drives day-to-day interactions in the forums on topics that range from best driver to what marker you use to mark your ball. It even allows us to share another thing we all love – buying and selling equipment.
Currently, in our GolfWRX buy/sell/trade (BST) forum, there is a listing for a TaylorMade BRNR mini driver head
From the seller: (@lasallen): “For sale is a BRNR mini 11.5 deg head only in brand new condition. $325 shipped.”
To check out the full listing in our BST forum, head through the link: TaylorMade BRNR mini driver head
This is the most impressive current listing from the GolfWRX BST, and if you are curious about the rules to participate in the BST Forum you can check them out here: GolfWRX BST Rules
- LIKE1
- LEGIT0
- WOW0
- LOL0
- IDHT0
- FLOP0
- OB0
- SHANK0
Equipment
Coolest thing for sale in the GolfWRX Classifieds (4/18/24): Ping PLD Limited Anser – 1988 Open Championship – #2 of only 88 Made
At GolfWRX, we are a community of like-minded individuals that all experience and express our enjoyment of the game in many ways.
It’s that sense of community that drives day-to-day interactions in the forums on topics that range from best driver to what marker you use to mark your ball. It even allows us to share another thing we all love – buying and selling equipment.
Currently, in our GolfWRX buy/sell/trade (BST) forum, there is a listing for a Ping PLD Limited Anser – 1988 Open Championship – #2 of only 88 Made.
From the seller: (@DLong72): “Ping PLD Limited Anser – 1988 Open Championship – #2 of only 88 Made. ?: $1150. ?? 100% milled collectors item from the limited releases commemorating when Ping putters won every major in 1988 (88 putters made). This was the model Seve Ballesteros used to win the 1988 Open Championship. Condition is brand new, never gamed, everything is in the original packaging as it came. Putter features the iconic sound slot.
Specs/ Additional Details
-100% Milled, Aluminum/Bronze Alloy (310g)
-Original Anser Design
-PING PP58 Grip
-Putter is built to standard specs.”
To check out the full listing in our BST forum, head through the link: Ping PLD Limited Anser – 1988 Open Championship – #2 of only 88 Made
This is the most impressive current listing from the GolfWRX BST, and if you are curious about the rules to participate in the BST Forum you can check them out here: GolfWRX BST Rules
- LIKE3
- LEGIT0
- WOW0
- LOL0
- IDHT0
- FLOP0
- OB0
- SHANK0
Equipment
Inside Collin Morikawa’s recent golf ball, driver, 3-wood, and “Proto” iron changes
As you probably know by now, Collin Morikawa switched putters after the first round of The Masters, and he ultimately went on to finish T3.
The putter was far from the only change he made last week, however, and his bag is continuing to change this week at the 2024 RBC Heritage.
On the range of The Masters, Morikawa worked closely with Adrian Reitveld, TaylorMade’s Senior Manager of Tour at TaylorMade, to find the perfect driver and 3-wood setups.
Morikawa started off 2024 by switching into TaylorMade’s Qi10 Max driver, but since went back to his faithful TaylorMade SIM – yes, the original SIM from 2020. Somehow, some way, it seems Morikawa always ends up back in that driver, which he used to win the 2020 PGA Championship, and the 2021 Open Championship.
At The Masters, however, Rietveld said the duo found the driver head that allowed “zero compromise” on Morikawa’s preferred fade flight and spin. To match his preferences, they landed on a TaylorMade Qi10 LS 9-degree head, and the lie angle is a touch flatter than his former SIM.
“It’s faster than his gamer, and I think what we found is it fits his desired shot shape, with zero compromise” Rietveld told GolfWRX.com on Wednesday at the RBC Heritage.
Then, to replace his former SIM rocket 3-wood, Morikawa decided to switch into the TaylorMade Qi10 core model 13.5-degree rocket head, with an adjustable hosel.
“He likes the spin characteristics of that head,” Rietveld said. “Now he’s interesting because with Collin, you can turn up at a tournament, and you look at his 3-wood, and he’s changed the setting. One day there’s more loft on it, one day there’s less loft on it. He’s that type of guy. He’s not scared to use the adjustability of the club.
“And I think he felt our titanium head didn’t spin as low as his original SIM. So we did some work with the other head, just because he liked the feel of it. It was a little high launching, so we fit him into something with less loft. It’s a naughty little piece of equipment.”
In addition to the driver and fairway wood changes, Morikawa also debuted his new “MySymbol” jersey No. 5 TP5x golf ball at The Masters. Morikawa’s choice of symbols is likely tied to his love of the Los Angeles Dodgers baseball team.
Not enough changes for you? There’s one more.
On Wednesday at the 2024 RBC Heritage, Morikawa was spotted with a new TaylorMade “Proto” 4-iron in the bag. If you recall, it’s the same model that Rory McIlroy debuted at the 2024 Valero Texas Open.
According to Morikawa, the new Proto 4-iron will replace his old P-770 hollow-bodied 4-iron.
“I used to hit my P-770 on a string, but sometimes the distance would be a little unpredictable,” Morikawa told GolfWRX.com. “This one launches a touch higher, and I feel I can predict the distance better. I know Rory replaced his P-760 with it. I’m liking it so far.”
See Morikawa’s full WITB from the 2024 RBC Heritage here.
- LIKE85
- LEGIT8
- WOW3
- LOL6
- IDHT2
- FLOP4
- OB3
- SHANK6
-
19th Hole1 week ago
Dave Portnoy places monstrous outright bet for the 2024 Masters
-
19th Hole3 weeks ago
Things got heated at the Houston Open between Tony Finau and Alejandro Tosti. Here’s why
-
19th Hole2 weeks ago
Tiger Woods arrives at 2024 Masters equipped with a putter that may surprise you
-
19th Hole2 weeks ago
Report: Tiger Woods has ‘eliminated sex’ in preparation for the 2024 Masters
-
19th Hole5 days ago
Two star names reportedly blanked Jon Rahm all week at the Masters
-
19th Hole5 days ago
Neal Shipley presser ends in awkward fashion after reporter claims Tiger handed him note on 8th fairway
-
19th Hole4 days ago
Report: LIV Golf identifies latest star name they hope to sign to breakaway tour
-
19th Hole3 weeks ago
Addiction, spinal fusion, and scam artists – Everything Anthony Kim revealed in candid interview with David Feherty
Pingback: Edison Golf launches new Edison 2.0 wedges - Fly Pin High
Pingback: Edison Golf launches new Edison 2.0 wedges – GolfWRX
Unitzero
Jul 2, 2020 at 11:36 am
Fat chance they’ll be for “everyone “, lefty’s left out yet again!
myron miller
Dec 6, 2019 at 9:18 pm
Will they be as hard to hit as the SCOR sand wedges are? 52 and 60 are easy to hit in most situations but the 56 is really tough to hit consistantly in heavy sand. Even Scor’s regional rep had lots of trouble with the 56. I could hit it in the rough but never consistently in the sand.
Jed Barish
Dec 6, 2019 at 4:13 pm
I ordered it because I am a believer in his wedges. I love his design with SCOR Golf and been waiting for Terry to come up with a new one 🙂 Hope I’ll be ok with KBS Tour S shaft. Congrats on the comeback!
Kevin
Dec 5, 2019 at 10:58 pm
Excited for these. Thanks Terry
chip75
Dec 5, 2019 at 6:10 pm
Mentions that current wedges are designed for exceptionally skilled tour players, then backs up their wedge is best with robot testing. Is that irony? I think that’s irony.
Maybe show the data capture from average players?
They do look nice.
Terry B Koehler
Dec 5, 2019 at 6:30 pm
Hello Chip, I can see where you might see irony in the robotic testing, but let me explain the process. With the robot, we can precisely replicate contact at five different points on the face, so that we can quantify the variance in smash factor and all other performance aspects. What we set out to do, and achieved, is the most consistent smash factor around the face, so that you get more consistent results from your slight mishits. I hope that clears up the irony?
Thank you.
Terry Koehler
chip75
Dec 5, 2019 at 9:24 pm
Hi Terry. It was something I found amusing, that current wedges were designed for near perfect ball-strikers to your wedges getting tested by a perfect one.
The problem with robot testing is that the results are rarely repeatable (or relatable) to human testing. If we continually hit high toe pitches short due to the the drop-off in efficiency, we’ll eventually start adding speed, we’re constantly making adjustments, robots don’t, they just repeat results. I understand the allure of robot testing (it’s something I find fascinating (the testing itself), as human testing is by its very nature extremely variable.
Anyway, I look forward to seeing reviews, the wedges look great, and I appreciate the post.
Bifule
Dec 5, 2019 at 4:08 pm
If I don’t see these on the USGA conforming club list currently does that mean they have not gone through the approval process to be legal for tournament use?
Terry Koehler
Dec 5, 2019 at 6:32 pm
We will be submitting production articles to the USGA to be measured for the conforming list as we get into regular production. We assure you they will be made to conform to all USGA specifications and be conforming.
C
Dec 5, 2019 at 3:38 pm
Will there be discrete bounce angles between lofts? Or are the clubs bent to a loft within each loft group, thereby changing the bounce angles?
Allen
Dec 5, 2019 at 2:55 pm
Not for everyone…there are no lefty models yet! Maybe next year.
DB
Dec 5, 2019 at 1:57 pm
They look really nice actually. I’m a little confused because the picture shows 58 but the article says odd numbers only. Then the website is selling only the special edition set that is 51-55-59.
Dennis Corley
Dec 5, 2019 at 1:51 pm
No pricing provided. I went to the website and understand why. Are you kidding?
—————–
“One of 500” – Special Edition of EDISON FORGED Wedges
Regular price
$537.00
Shipping calculated at checkout.
—————-
I suppose there is no end to the madness.
Cody
Dec 5, 2019 at 2:43 pm
Looks like it’s for a set of 3 wedges. Pricey, but so are Vokeys.
cody
Dec 5, 2019 at 5:56 pm
I guess he didnt learn his lesson with Hogan…
Oh well these will be gone soon too.
Barrett
Dec 6, 2019 at 1:52 pm
In all fairness, that price is only to get in to their “500 Club”. I’m sure the wedges will cost less than $180 when they are available to the general public.
Randy Siedschlag
Sep 29, 2020 at 9:50 am
Still $179 so I don’t think so sadly. If these we $100-125 range I’d pull the trigger now.
C
Dec 5, 2019 at 1:37 pm
“Edison Forged wedges will come stock in lofts from 45 to 63 degrees in odd numbers only”
…shows picture of 58.
Ben Alberstadt
Dec 5, 2019 at 3:22 pm
The photos are of wedges that were built to even-numbered specs for testing purposes. Same wedges as will be at retail, save for the 1-degree loft differences.