Connect with us

Equipment

’13 Callaway Irons: In-hand photos, video and specs

Published

on

Callaway X Hot Irons

Callaway’s X Hot and X Hot Pro irons were designed for two distinct categories of golfers, but they have one major similarity — they’re designed to fly a long way with consistent distance.

The X Hot is Callaway’s most forgiving iron in its 2013 lineup, featuring a deep cavity to improve distance and forgiveness. It’s a game-improvement iron, a category of irons that gets a bad rap for causing flyers — shots that are hit slightly above the center of the face and tend to fly unexpectedly far.

[youtube id=”OD5ltnU6GB4″ width=”620″ height=”360″]

That’s why Callaway removed the undercut that sits behind the top line of most cavity back irons. By reinforcing the top part of the face, engineers lowered the sweetspot to slightly below center (0.155 inches lower then than Callaway’s previous game-improvement model, the RAZR X), which is where most amateurs make contact with their irons. By doing this, Callaway engineers said they’ve removed the “high hot spot.”

“Golfers have a mortal fear of hitting the globe first, so they hit it thin,” said Dr. Alan Hocknell, vice president of R&D for Callaway. “That’s why these irons are very forgiving low on the face.”

X Hot 3 Iron

 X Hot Pro 3 Iron 

The X Hot Pro irons are designed for golfers who need forgiveness but don’t want to look at an oversize club. The Pro model has less off set, thinner soles, thinner top lines and 1-degree weaker lofts than the standard model. Like the standard version, engineers stiffened the upper part of the face to eliminate flyers and make the lower portion of the face more forgiving on mishits. The Pros also feature Callaway’s 20-degree close-spaced grooves, which Luke Williams, global director of woods and irons for Callaway, said increases backspin as much as 1000 rpms out of the rough.

“This is the first time that we’ve cast the groove that we’ve been forging,” Williams said. “It’s a harder, more expensive groove to make. But we wanted to put in in the (pro) line where players are more likely to notice.”

Both models are cast from 17-4 stainless and feature dual-material medallions in the iron cavities to improve sound and feel.

Click here for more in-depth photos and discussion in the “Tour/Pre-release equipment” forum.

Availability: Jan. 25, 2013

Price:

  • X Hot Irons: 3-PW or 4-AW — $699 (steel), $899 (graphite)
  • X Hot Pro Irons: 3-PW or 4-AW — $799 (steel)

X Hot Shafts: 

  • Steel — True Temper Speed Step 85 Lightweight, Regular (93 grams) and Stiff (95 grams)
  • Graphite — X Hot I-750, Light (68 grams), Regular (79 grams), Stiff (79 grams)

X Hot Pro Shaft:

  • Type: Project X 95 Flighted Steel [5.0 (R), 5.5 (S) and 6.0 (X)]
  • Weight: weight: 92.3 grams (R), 92.3 grams (S) and 97.3 grams (X)

Specs:

Click here for more in-depth photos and discussion in the “Tour/Pre-release equipment” forum.

 

 

Click here for more in-depth photos and discussion in the “Tour/Pre-release equipment” forum.

Your Reaction?
  • 39
  • LEGIT7
  • WOW3
  • LOL1
  • IDHT1
  • FLOP2
  • OB18
  • SHANK2

14 Comments

14 Comments

  1. Art

    May 14, 2014 at 8:35 pm

    Does anyone know if the Callaway X hot are bore through?

  2. Ed

    Apr 30, 2013 at 12:38 pm

    Had a fitting for irons by a leading Pro Fitter. I tried out the new TM Rocketbladez and the Callaway X-Hots. I hit my current 6 iron further and with closer ball dispersion than any of the TM 6 irons I tried out using a number of different shafts. The Callaway X-Hot went 10 yards further with the bog standard off-the-shelf shaft with equally close dispersion to my own iron. My current irons? – Callaway FT Fusions. And yet both these new 6 irons have the same loft as my old FT Fusion 5 iron!!!

  3. FCM

    Jan 13, 2013 at 5:48 pm

    Hallelujah on everyone calling out the ridiculous lofts from Callaway and TM. Of course they will be longer than the other brands. Even the X Hot Pro iron’s have much stronger lofts than the other better player irons. Titleist and Ping are two of the big companies still making true honest products. None of the marketing BS needed to back up their products too.

  4. Nick

    Dec 20, 2012 at 11:56 pm

    Golf Pro: “What makes your 2013 iron so good?”

    TMaG Sales Rep: “With the addition of the speed pocket in the Rocketbladez, we were able increase the size of the sweet spot from a pea to a quarter.”

    Callaway Sales Rep: “Forget about the sweet spot. We fixed the ‘high hot spot’ problem. You’ll never hit a flyer again!”

    • Joe Golfer

      Dec 21, 2012 at 4:10 am

      Exactly, Nick. They fixed the mythological “high hot spot”, that thing that exists on courses where unicorns roam.

  5. Lee

    Dec 20, 2012 at 4:34 am

    Certainly nothing special and cheap looking but at least Calli are using decent shafts especially in the Pro model. The loft specs get more and more rediculous every year however having grown up with a 50 deg PW they are now in a position I like. 5-AW is pretty much what 3-PW used to be so with these clubs you don’t need the 3 & 4 irons and can balance the business end of the bag accordingly.

  6. Joe Golfer

    Dec 20, 2012 at 2:19 am

    Repeating the other posts, Wow, those lofts really got strong. “Gotta keep up with the boys at TaylorMade”, said the
    Callaway R&D team, “even if it makes for a cruddier club”. Now even the “Pro” model has superstrong lofts.
    And that garbage about flyers is ridiculous. They talk about hitting the ball above the center of the face? Maybe off the tee on a par 3, but not off the turf. You’re not going to get spring effect from an older Callaway iron no matter how much you hit down on the ball, EVER. C’mon, Callaway, cut the crapola. New Callaway motto ought to be “We can’t make a better clubhead, so we’ll just hype it with a bunch of mularkey.”
    Want to hit a flyer? Hit out of rough and have grass get between ball and grooves, so you don’t get spin on the ball. That’s a flyer.
    On the GolfWRX homepage, there’s an article by Tom Wishon called “Wishon: The way golf clubs are being sold has harmed golf”. Everybody should read that article, as it explains why Callaway has just jumped the shark in terms of making a better club.

  7. cg

    Dec 18, 2012 at 12:40 pm

    they look just like titleist aps

    • Dominic Chong

      Dec 19, 2012 at 4:43 pm

      Exactly.
      I am looking into the AP1 right now.

  8. cg

    Dec 18, 2012 at 12:39 pm

    just last year, we were told the slot behind the face helped us get it higher. I have never met a golfer who said that was bad…now we hate fliers? most people would love a flier so they can get to the green. I think the designers are laughing at the public as they go back and fourth with the ULTIMATE club design that will never be beaten..until next year.
    forget a gap or a gap gap wedge..you need a gap gap gap wedge. Or else let us carry 16 clubs.

  9. Jeff

    Dec 17, 2012 at 10:01 pm

    Wow, they got really aggressive with increasing the lofts. The pitching wedge is 44*. If you have a standard 52* gap wedge there will be an 8* difference. Are we approaching the point of needing a gap gap wedge?

  10. Jay

    Dec 17, 2012 at 8:14 pm

    These are just ugly…
    – not in the high tech new design type of ugly
    – but in the cheap walmart type ugly

    Please Callaway, you have to get a new design team.

    No matter how the clubs perform, they are not going to sell well if they keep looking like this.

    Don’t believe guys on this forum who say they don’t care about looks as long as they perform. That’s total BS.

  11. luke keefner

    Dec 17, 2012 at 5:28 pm

    The Xhot 6 has a stronger loft than my Mizuno 5 iron

Leave a Reply

Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Whats in the Bag

Steve Stricker WITB 2024 (April)

Published

on

Driver: Titleist TSR3 (9 degrees, C4 SureFit setting)
Shaft: Fujikura Motore Speeder VC 7.2 X

3-wood: Titleist 915F (13.5 degrees)
Shaft: Mitsubishi Tensei CK Pro White 80 TX

Hybrid: Titleist 816 H1 (17 degrees)
Shaft: Fujikura Motore Speeder VC 9.2 X

Irons: Titleist T100 (3-9)
Shafts: Project X 6.5

Wedges: Titleist Vokey SM8 (46-10F @55), Titleist Vokey SM10 (54-10S @53), Titleist Vokey SM4 (60 @59)
Shafts: True Temper Dynamic Gold X100 w/Sensicore

Putter: Odyssey White Hot No. 2

Ball: Titleist Pro V1x

Grips: Golf Pride Tour Velvet Grip Rite

Check out more in-hand photos of Steve Stricker’s clubs here.

Your Reaction?
  • 0
  • LEGIT0
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

Whats in the Bag

Alex Fitzpatrick WITB 2024 (April)

Published

on

  • Alex Fitzpatrick what’s in the bag accurate as of the Zurich Classic. 

Driver: Ping G430 LST (10.5 degrees)
Shaft: Fujikura Ventus Black 6 X

3-wood: TaylorMade Qi10 (15 degrees)
Shaft: Fujikura Ventus TR Black 7 X

Hybrid: Ping G430 (19 degrees)
Shaft: Fujikura Ventus Black HB 10 TX

Irons: Ping iCrossover (2), Titleist T100 (4-PW)
Shafts: Fujikura Ventus Black HB 9 TX (2), Nippon N.S. Pro Modus 3 Tour 120 X (4-9)

Wedges: Titleist Vokey Design SM10 (50-12F, 56-12D, 60-08M)
Shafts: Nippon N.S. Pro Modus 3 Tour 120 X

Putter: Bettinardi SS16 Dass

Grips: Golf Pride MCC

Check out more in-hand photos of Alex Fitzpatrick’s clubs here.

Your Reaction?
  • 0
  • LEGIT0
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

Equipment

What’s the perfect mini-driver/shaft combo? – GolfWRXers discuss

Published

on

In our forums, our members have been discussing Mini-Drivers and accompanying shafts. WRXer ‘JamesFisher1990’ is about to purchase a BRNR Mini and is torn on what shaft weight to use, and our members have been sharing their thoughts and set ups in our forum.

Here are a few posts from the thread, but make sure to check out the entire discussion and have your say at the link below.

  • PARETO: “New BRNR at 13.5. Took it over to TXG (Club Champ but TXG will always rule) in Calgary for a fit. Took the head down to 12, stuck in a Graphite Design AD at 3 wood length and 60g. Presto- numbers that rivaled my G430Max but with waaaaay tighter dispersion. Win.”
  • driveandputtmachine: “Still playing a MIni 300.  The head was only 208, so I ordered a heavier weight and play it at 3 wood length.  I am playing a Ventus Red 70.   I play 70 grams in my fairways.  I use it mainly to hit draws off the tee.  When I combine me, a driver, and trying to hit a draw it does not work out well most of the time.  So the MIni is for that. As an aside, I have not hit the newest BRNR, but the previous model wasn’t great off the deck.  The 300 Mini is very good off the deck.”
  • JAM01: “Ok, just put the BRNR in the bag along side a QI10 max and a QI10 3 wood. A load of top end redundancy. But, I have several holes at my two home courses where the flight and accuracy of the mini driver helps immensely. Mine is stock Proforce 65 at 13.5, I could see a heavier shaft, but to normal flex, as a nice alternative.”

Entire Thread: “What’s the perfect Mini-Driver/Shaft combo? – GolfWRXers discuss”

Your Reaction?
  • 3
  • LEGIT0
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

WITB

Facebook

Trending