Connect with us

Equipment

’13 Callaway Irons: In-hand photos, video and specs

Published

on

Callaway X Hot Irons

Callaway’s X Hot and X Hot Pro irons were designed for two distinct categories of golfers, but they have one major similarity — they’re designed to fly a long way with consistent distance.

The X Hot is Callaway’s most forgiving iron in its 2013 lineup, featuring a deep cavity to improve distance and forgiveness. It’s a game-improvement iron, a category of irons that gets a bad rap for causing flyers — shots that are hit slightly above the center of the face and tend to fly unexpectedly far.

[youtube id=”OD5ltnU6GB4″ width=”620″ height=”360″]

That’s why Callaway removed the undercut that sits behind the top line of most cavity back irons. By reinforcing the top part of the face, engineers lowered the sweetspot to slightly below center (0.155 inches lower then than Callaway’s previous game-improvement model, the RAZR X), which is where most amateurs make contact with their irons. By doing this, Callaway engineers said they’ve removed the “high hot spot.”

“Golfers have a mortal fear of hitting the globe first, so they hit it thin,” said Dr. Alan Hocknell, vice president of R&D for Callaway. “That’s why these irons are very forgiving low on the face.”

X Hot 3 Iron

 X Hot Pro 3 Iron 

The X Hot Pro irons are designed for golfers who need forgiveness but don’t want to look at an oversize club. The Pro model has less off set, thinner soles, thinner top lines and 1-degree weaker lofts than the standard model. Like the standard version, engineers stiffened the upper part of the face to eliminate flyers and make the lower portion of the face more forgiving on mishits. The Pros also feature Callaway’s 20-degree close-spaced grooves, which Luke Williams, global director of woods and irons for Callaway, said increases backspin as much as 1000 rpms out of the rough.

“This is the first time that we’ve cast the groove that we’ve been forging,” Williams said. “It’s a harder, more expensive groove to make. But we wanted to put in in the (pro) line where players are more likely to notice.”

Both models are cast from 17-4 stainless and feature dual-material medallions in the iron cavities to improve sound and feel.

Click here for more in-depth photos and discussion in the “Tour/Pre-release equipment” forum.

Availability: Jan. 25, 2013

Price:

  • X Hot Irons: 3-PW or 4-AW — $699 (steel), $899 (graphite)
  • X Hot Pro Irons: 3-PW or 4-AW — $799 (steel)

X Hot Shafts: 

  • Steel — True Temper Speed Step 85 Lightweight, Regular (93 grams) and Stiff (95 grams)
  • Graphite — X Hot I-750, Light (68 grams), Regular (79 grams), Stiff (79 grams)

X Hot Pro Shaft:

  • Type: Project X 95 Flighted Steel [5.0 (R), 5.5 (S) and 6.0 (X)]
  • Weight: weight: 92.3 grams (R), 92.3 grams (S) and 97.3 grams (X)

Specs:

Click here for more in-depth photos and discussion in the “Tour/Pre-release equipment” forum.

 

 

Click here for more in-depth photos and discussion in the “Tour/Pre-release equipment” forum.

Your Reaction?
  • 39
  • LEGIT7
  • WOW3
  • LOL1
  • IDHT1
  • FLOP2
  • OB18
  • SHANK2

14 Comments

14 Comments

  1. Art

    May 14, 2014 at 8:35 pm

    Does anyone know if the Callaway X hot are bore through?

  2. Ed

    Apr 30, 2013 at 12:38 pm

    Had a fitting for irons by a leading Pro Fitter. I tried out the new TM Rocketbladez and the Callaway X-Hots. I hit my current 6 iron further and with closer ball dispersion than any of the TM 6 irons I tried out using a number of different shafts. The Callaway X-Hot went 10 yards further with the bog standard off-the-shelf shaft with equally close dispersion to my own iron. My current irons? – Callaway FT Fusions. And yet both these new 6 irons have the same loft as my old FT Fusion 5 iron!!!

  3. FCM

    Jan 13, 2013 at 5:48 pm

    Hallelujah on everyone calling out the ridiculous lofts from Callaway and TM. Of course they will be longer than the other brands. Even the X Hot Pro iron’s have much stronger lofts than the other better player irons. Titleist and Ping are two of the big companies still making true honest products. None of the marketing BS needed to back up their products too.

  4. Nick

    Dec 20, 2012 at 11:56 pm

    Golf Pro: “What makes your 2013 iron so good?”

    TMaG Sales Rep: “With the addition of the speed pocket in the Rocketbladez, we were able increase the size of the sweet spot from a pea to a quarter.”

    Callaway Sales Rep: “Forget about the sweet spot. We fixed the ‘high hot spot’ problem. You’ll never hit a flyer again!”

    • Joe Golfer

      Dec 21, 2012 at 4:10 am

      Exactly, Nick. They fixed the mythological “high hot spot”, that thing that exists on courses where unicorns roam.

  5. Lee

    Dec 20, 2012 at 4:34 am

    Certainly nothing special and cheap looking but at least Calli are using decent shafts especially in the Pro model. The loft specs get more and more rediculous every year however having grown up with a 50 deg PW they are now in a position I like. 5-AW is pretty much what 3-PW used to be so with these clubs you don’t need the 3 & 4 irons and can balance the business end of the bag accordingly.

  6. Joe Golfer

    Dec 20, 2012 at 2:19 am

    Repeating the other posts, Wow, those lofts really got strong. “Gotta keep up with the boys at TaylorMade”, said the
    Callaway R&D team, “even if it makes for a cruddier club”. Now even the “Pro” model has superstrong lofts.
    And that garbage about flyers is ridiculous. They talk about hitting the ball above the center of the face? Maybe off the tee on a par 3, but not off the turf. You’re not going to get spring effect from an older Callaway iron no matter how much you hit down on the ball, EVER. C’mon, Callaway, cut the crapola. New Callaway motto ought to be “We can’t make a better clubhead, so we’ll just hype it with a bunch of mularkey.”
    Want to hit a flyer? Hit out of rough and have grass get between ball and grooves, so you don’t get spin on the ball. That’s a flyer.
    On the GolfWRX homepage, there’s an article by Tom Wishon called “Wishon: The way golf clubs are being sold has harmed golf”. Everybody should read that article, as it explains why Callaway has just jumped the shark in terms of making a better club.

  7. cg

    Dec 18, 2012 at 12:40 pm

    they look just like titleist aps

    • Dominic Chong

      Dec 19, 2012 at 4:43 pm

      Exactly.
      I am looking into the AP1 right now.

  8. cg

    Dec 18, 2012 at 12:39 pm

    just last year, we were told the slot behind the face helped us get it higher. I have never met a golfer who said that was bad…now we hate fliers? most people would love a flier so they can get to the green. I think the designers are laughing at the public as they go back and fourth with the ULTIMATE club design that will never be beaten..until next year.
    forget a gap or a gap gap wedge..you need a gap gap gap wedge. Or else let us carry 16 clubs.

  9. Jeff

    Dec 17, 2012 at 10:01 pm

    Wow, they got really aggressive with increasing the lofts. The pitching wedge is 44*. If you have a standard 52* gap wedge there will be an 8* difference. Are we approaching the point of needing a gap gap wedge?

  10. Jay

    Dec 17, 2012 at 8:14 pm

    These are just ugly…
    – not in the high tech new design type of ugly
    – but in the cheap walmart type ugly

    Please Callaway, you have to get a new design team.

    No matter how the clubs perform, they are not going to sell well if they keep looking like this.

    Don’t believe guys on this forum who say they don’t care about looks as long as they perform. That’s total BS.

  11. luke keefner

    Dec 17, 2012 at 5:28 pm

    The Xhot 6 has a stronger loft than my Mizuno 5 iron

Leave a Reply

Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Equipment

Coolest thing for sale in the GolfWRX Classifieds (4/18/24): TaylorMade BRNR mini driver head

Published

on

At GolfWRX, we are a community of like-minded individuals that all experience and express our enjoyment of the game in many ways.

It’s that sense of community that drives day-to-day interactions in the forums on topics that range from best driver to what marker you use to mark your ball. It even allows us to share another thing we all love – buying and selling equipment.

Currently, in our GolfWRX buy/sell/trade (BST) forum, there is a listing for a TaylorMade BRNR mini driver head

From the seller: (@lasallen): “For sale is a BRNR mini 11.5 deg head only in brand new condition.  $325 shipped.”

To check out the full listing in our BST forum, head through the link: TaylorMade BRNR mini driver head 

This is the most impressive current listing from the GolfWRX BST, and if you are curious about the rules to participate in the BST Forum you can check them out here: GolfWRX BST Rules

Your Reaction?
  • 0
  • LEGIT0
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

Equipment

Coolest thing for sale in the GolfWRX Classifieds (4/18/24): Ping PLD Limited Anser – 1988 Open Championship – #2 of only 88 Made

Published

on

At GolfWRX, we are a community of like-minded individuals that all experience and express our enjoyment of the game in many ways.

It’s that sense of community that drives day-to-day interactions in the forums on topics that range from best driver to what marker you use to mark your ball. It even allows us to share another thing we all love – buying and selling equipment.

Currently, in our GolfWRX buy/sell/trade (BST) forum, there is a listing for a Ping PLD Limited Anser – 1988 Open Championship – #2 of only 88 Made.

From the seller: (@DLong72): “Ping PLD Limited Anser – 1988 Open Championship – #2 of only 88 Made. ?: $1150. ?? 100% milled collectors item from the limited releases commemorating when Ping putters won every major in 1988 (88 putters made). This was the model Seve Ballesteros used to win the 1988 Open Championship. Condition is brand new, never gamed, everything is in the original packaging as it came. Putter features the iconic sound slot.

Specs/ Additional Details

-100% Milled, Aluminum/Bronze Alloy (310g)

-Original Anser Design

-PING PP58 Grip

-Putter is built to standard specs.”

To check out the full listing in our BST forum, head through the link: Ping PLD Limited Anser – 1988 Open Championship – #2 of only 88 Made

This is the most impressive current listing from the GolfWRX BST, and if you are curious about the rules to participate in the BST Forum you can check them out here: GolfWRX BST Rules

Your Reaction?
  • 1
  • LEGIT0
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

Equipment

Inside Collin Morikawa’s recent golf ball, driver, 3-wood, and “Proto” iron changes

Published

on

As you probably know by now, Collin Morikawa switched putters after the first round of The Masters, and he ultimately went on to finish T3.

The putter was far from the only change he made last week, however, and his bag is continuing to change this week at the 2024 RBC Heritage.

On the range of The Masters, Morikawa worked closely with Adrian Reitveld, TaylorMade’s Senior Manager of Tour at TaylorMade, to find the perfect driver and 3-wood setups.

Morikawa started off 2024 by switching into TaylorMade’s Qi10 Max driver, but since went back to his faithful TaylorMade SIM – yes, the original SIM from 2020. Somehow, some way, it seems Morikawa always ends up back in that driver, which he used to win the 2020 PGA Championship, and the 2021 Open Championship.

At The Masters, however, Rietveld said the duo found the driver head that allowed “zero compromise” on Morikawa’s preferred fade flight and spin. To match his preferences, they landed on a TaylorMade Qi10 LS 9-degree head, and the lie angle is a touch flatter than his former SIM.

“It’s faster than his gamer, and I think what we found is it fits his desired shot shape, with zero compromise” Rietveld told GolfWRX.com on Wednesday at the RBC Heritage.

Then, to replace his former SIM rocket 3-wood, Morikawa decided to switch into the TaylorMade Qi10 core model 13.5-degree rocket head, with an adjustable hosel.

“He likes the spin characteristics of that head,” Rietveld said. “Now he’s interesting because with Collin, you can turn up at a tournament, and you look at his 3-wood, and he’s changed the setting. One day there’s more loft on it, one day there’s less loft on it. He’s that type of guy. He’s not scared to use the adjustability of the club.

“And I think he felt our titanium head didn’t spin as low as his original SIM. So we did some work with the other head, just because he liked the feel of it. It was a little high launching, so we fit him into something with less loft. It’s a naughty little piece of equipment.” 

In addition to the driver and fairway wood changes, Morikawa also debuted his new “MySymbol” jersey No. 5 TP5x golf ball at The Masters. Morikawa’s choice of symbols is likely tied to his love of the Los Angeles Dodgers baseball team.

Not enough changes for you? There’s one more.

On Wednesday at the 2024 RBC Heritage, Morikawa was spotted with a new TaylorMade “Proto” 4-iron in the bag. If you recall, it’s the same model that Rory McIlroy debuted at the 2024 Valero Texas Open.

According to Morikawa, the new Proto 4-iron will replace his old P-770 hollow-bodied 4-iron.

“I used to hit my P-770 on a string, but sometimes the distance would be a little unpredictable,” Morikawa told GolfWRX.com. “This one launches a touch higher, and I feel I can predict the distance better. I know Rory replaced his P-760 with it. I’m liking it so far.” 

See Morikawa’s full WITB from the 2024 RBC Heritage here. 

Your Reaction?
  • 75
  • LEGIT8
  • WOW2
  • LOL6
  • IDHT2
  • FLOP4
  • OB3
  • SHANK6

Continue Reading

WITB

Facebook

Trending