Equipment

’13 Callaway Irons: In-hand photos, video and specs

Published

11 years ago

Dec 17, 2012

Callaway’s X Hot and X Hot Pro irons were designed for two distinct categories of golfers, but they have one major similarity — they’re designed to fly a long way with consistent distance.

The X Hot is Callaway’s most forgiving iron in its 2013 lineup, featuring a deep cavity to improve distance and forgiveness. It’s a game-improvement iron, a category of irons that gets a bad rap for causing flyers — shots that are hit slightly above the center of the face and tend to fly unexpectedly far.

[youtube id=”OD5ltnU6GB4″ width=”620″ height=”360″]

That’s why Callaway removed the undercut that sits behind the top line of most cavity back irons. By reinforcing the top part of the face, engineers lowered the sweetspot to slightly below center (0.155 inches lower then than Callaway’s previous game-improvement model, the RAZR X), which is where most amateurs make contact with their irons. By doing this, Callaway engineers said they’ve removed the “high hot spot.”

“Golfers have a mortal fear of hitting the globe first, so they hit it thin,” said Dr. Alan Hocknell, vice president of R&D for Callaway. “That’s why these irons are very forgiving low on the face.”

X Hot 3 Iron

X Hot Pro 3 Iron

The X Hot Pro irons are designed for golfers who need forgiveness but don’t want to look at an oversize club. The Pro model has less off set, thinner soles, thinner top lines and 1-degree weaker lofts than the standard model. Like the standard version, engineers stiffened the upper part of the face to eliminate flyers and make the lower portion of the face more forgiving on mishits. The Pros also feature Callaway’s 20-degree close-spaced grooves, which Luke Williams, global director of woods and irons for Callaway, said increases backspin as much as 1000 rpms out of the rough.

“This is the first time that we’ve cast the groove that we’ve been forging,” Williams said. “It’s a harder, more expensive groove to make. But we wanted to put in in the (pro) line where players are more likely to notice.”

Both models are cast from 17-4 stainless and feature dual-material medallions in the iron cavities to improve sound and feel.

Click here for more in-depth photos and discussion in the “Tour/Pre-release equipment” forum.

Availability: Jan. 25, 2013

Price:

X Hot Irons: 3-PW or 4-AW — $699 (steel), $899 (graphite)
X Hot Pro Irons: 3-PW or 4-AW — $799 (steel)

X Hot Shafts:

Steel — True Temper Speed Step 85 Lightweight, Regular (93 grams) and Stiff (95 grams)
Graphite — X Hot I-750, Light (68 grams), Regular (79 grams), Stiff (79 grams)

X Hot Pro Shaft:

Type: Project X 95 Flighted Steel [5.0 (R), 5.5 (S) and 6.0 (X)]
Weight: weight: 92.3 grams (R), 92.3 grams (S) and 97.3 grams (X)

Specs:

Click here for more in-depth photos and discussion in the “Tour/Pre-release equipment” forum.

Your Reaction?

LIKE39
LEGIT7
WOW3
LOL1
IDHT1
FLOP2
OB18
SHANK2

Related Topics:Callaway

Up Next

In-hand photos: ’13 Adams Super LS and S Drivers

Don't Miss

2013 Callaway X Hot and X Hot Pro Hybrids

Zak Kozuchowski

14 Comments

Art

May 14, 2014 at 8:35 pm

Does anyone know if the Callaway X hot are bore through?

Reply Report comment
Ed

Apr 30, 2013 at 12:38 pm

Had a fitting for irons by a leading Pro Fitter. I tried out the new TM Rocketbladez and the Callaway X-Hots. I hit my current 6 iron further and with closer ball dispersion than any of the TM 6 irons I tried out using a number of different shafts. The Callaway X-Hot went 10 yards further with the bog standard off-the-shelf shaft with equally close dispersion to my own iron. My current irons? – Callaway FT Fusions. And yet both these new 6 irons have the same loft as my old FT Fusion 5 iron!!!

Reply Report comment
FCM

Jan 13, 2013 at 5:48 pm

Hallelujah on everyone calling out the ridiculous lofts from Callaway and TM. Of course they will be longer than the other brands. Even the X Hot Pro iron’s have much stronger lofts than the other better player irons. Titleist and Ping are two of the big companies still making true honest products. None of the marketing BS needed to back up their products too.

Reply Report comment
Nick

Dec 20, 2012 at 11:56 pm

Golf Pro: “What makes your 2013 iron so good?”

TMaG Sales Rep: “With the addition of the speed pocket in the Rocketbladez, we were able increase the size of the sweet spot from a pea to a quarter.”

Callaway Sales Rep: “Forget about the sweet spot. We fixed the ‘high hot spot’ problem. You’ll never hit a flyer again!”

Reply Report comment
- Joe Golfer
  
  Dec 21, 2012 at 4:10 am
  
  Exactly, Nick. They fixed the mythological “high hot spot”, that thing that exists on courses where unicorns roam.
  
  Reply Report comment
  - FCM
    
    Jan 13, 2013 at 5:48 pm
    
    LMAO!! Great!!
    
    Reply Report comment
Lee

Dec 20, 2012 at 4:34 am

Certainly nothing special and cheap looking but at least Calli are using decent shafts especially in the Pro model. The loft specs get more and more rediculous every year however having grown up with a 50 deg PW they are now in a position I like. 5-AW is pretty much what 3-PW used to be so with these clubs you don’t need the 3 & 4 irons and can balance the business end of the bag accordingly.

Reply Report comment
Joe Golfer

Dec 20, 2012 at 2:19 am

Repeating the other posts, Wow, those lofts really got strong. “Gotta keep up with the boys at TaylorMade”, said the
Callaway R&D team, “even if it makes for a cruddier club”. Now even the “Pro” model has superstrong lofts.
And that garbage about flyers is ridiculous. They talk about hitting the ball above the center of the face? Maybe off the tee on a par 3, but not off the turf. You’re not going to get spring effect from an older Callaway iron no matter how much you hit down on the ball, EVER. C’mon, Callaway, cut the crapola. New Callaway motto ought to be “We can’t make a better clubhead, so we’ll just hype it with a bunch of mularkey.”
Want to hit a flyer? Hit out of rough and have grass get between ball and grooves, so you don’t get spin on the ball. That’s a flyer.
On the GolfWRX homepage, there’s an article by Tom Wishon called “Wishon: The way golf clubs are being sold has harmed golf”. Everybody should read that article, as it explains why Callaway has just jumped the shark in terms of making a better club.

Reply Report comment
cg

Dec 18, 2012 at 12:40 pm

they look just like titleist aps

Reply Report comment
- Dominic Chong
  
  Dec 19, 2012 at 4:43 pm
  
  Exactly.
  I am looking into the AP1 right now.
  
  Reply Report comment
cg

Dec 18, 2012 at 12:39 pm

just last year, we were told the slot behind the face helped us get it higher. I have never met a golfer who said that was bad…now we hate fliers? most people would love a flier so they can get to the green. I think the designers are laughing at the public as they go back and fourth with the ULTIMATE club design that will never be beaten..until next year.
forget a gap or a gap gap wedge..you need a gap gap gap wedge. Or else let us carry 16 clubs.

Reply Report comment
Jeff

Dec 17, 2012 at 10:01 pm

Wow, they got really aggressive with increasing the lofts. The pitching wedge is 44*. If you have a standard 52* gap wedge there will be an 8* difference. Are we approaching the point of needing a gap gap wedge?

Reply Report comment
Jay

Dec 17, 2012 at 8:14 pm

These are just ugly…
– not in the high tech new design type of ugly
– but in the cheap walmart type ugly

Please Callaway, you have to get a new design team.

No matter how the clubs perform, they are not going to sell well if they keep looking like this.

Don’t believe guys on this forum who say they don’t care about looks as long as they perform. That’s total BS.

Reply Report comment
luke keefner

Dec 17, 2012 at 5:28 pm

The Xhot 6 has a stronger loft than my Mizuno 5 iron

Reply Report comment

Cancel reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Equipment

A shocking Backstryke putter appearance + 7 interesting gear photos from the Zurich Classic

Published

10 hours ago

Apr 25, 2024

Andrew Tursky

Welcome to New Orleans, where TPC Louisiana plays host to the 2024 Zurich Classic. In between breakfast beignets and nightly Creole feasts, PGA Tour players are also competing in the unique two-man format at the Zurich this week.

Although the vibes in Nawlins are a bit lighter-fare than the recent back-to-back competitions the Masters and the RBC Heritage signature event), the gear news was no less serious this week.

We spotted some recent changes from Rory McIlroy, a very rare Odyssey Backstryke putter, dove into the bag of legendary New Orleans Saints quarterback Drew Brees, and spotted Patrick Cantlay continuing to test new equipment.

Get your beads out and crack your crawfish, because it’s time for an equipment rundown from The Big Easy (meaning New Orleans, of course, not Ernie Els).

See all of our photos from the Zurich Classic here

Rory’s on-and-off lob wedge

Since the end of 2023, Rory McIlroy has had an on-again, off-again relationship with a Titleist Vokey K-Grind lob wedge. In his last start, it was on, and the wedge is back in the bag again this week. We got a great look at the complicated grind that McIlroy uses.

View this post on Instagram

A post shared by GolfWRX (@golfwrx)

A full look into McIlroy’s bag above also shows that he switched out of the TaylorMade BRNR Mini Copper that he used at the RBC Heritage, and he’s back into the Qi10 core 3-wood. As we discussed last week, McIlroy will likely keep the BRNR around as a course-specific club, trading it in and out for the 3-wood.

See Rory McIlroy’s full 2024 WITB from the Zurich here

Turning Back the clock

Unless Tommy Gainey is in the field, it’s unlikely you’ll ever see Odyssey’s Backstryke technology make an appearance on the PGA Tour.

But then, when you least expect it, Russ Cochran shows up.

For more than a decade – since the 2013 Sony Open in Hawai’i – Cochran has been stuck on 599 PGA Tour starts. This week will be his 600th.

Cochran is in the field at the Zurich this week playing alongside Eric Cole, whose regular caddie is Reed Cochran, Russ’s son.

The Backstryke putter was first released back in 2010, and its unique design helps shift the axis point of the putter closer to the CG of the head. And, the putter is getting a nod this week at the Zurich Classic, thanks to Cochran’s 600th career PGA Tour start.

The putter is certainly awesome, but don’t forget to check out Cochran’s full WITB from this week.

Drew Brees with a Super Bowl winning Scotty Cameron putter

Drew Brees, a legendary retired quarterback for the hometown New Orleans Saints, made an appearance at the Zurich’s Wednesday Pro-Am, playing alongside Zach Johnson, Ryan Palmer, and current Saints QB Derek Carr.

Brees’ bag included a TaylorMade Stealth2 Plus driver, a BRNR Mini 13.5-degree, a Stealth 5-wood, a mixed set of P-790 and P-760 irons, Milled Grind Hi-Toe wedges, and a custom Scotty Cameron “New Orleans Saints” putter, which Scotty made for Brees following his Super Bowl MVP-winning performance in 2010.

View this post on Instagram

A post shared by GolfWRX (@golfwrx)

It should also be noted that Brees has his Venmo QR code as a bag tag.

If you’re gambling with Brees on the course, just know that not having cash won’t work as an excuse.

Brilliant.

See Drew Brees’ full WITB from the Zurich here

Stricker’s unrecognizable putter

Steve Stricker has made numerous upgrades to his bag recently, including a new TSR3 driver and T100 irons, but his longtime Odyssey White Hot No. 2 putter is still going strong. It’s the most recognizable unrecognizable putter ever.

Here’s a better look at Stricker’s flatstick, which he started using back in 2007.

View this post on Instagram

A post shared by GolfWRX (@golfwrx)

Patrick Cantlay has opened the equipment-switching floodgates

Over on the PGA Tour’s Equipment Report this week, we covered Cantlay’s recent switch into Ping Blueprint S irons, and a Titleist TSR2 driver.

Cantlay hadn’t switched irons for about seven years, so the iron switch he made at The 2024 Masters came as a shock to the norm. He simply isn’t one to change gear very often, so anytime Cantlay makes a switch, it’s news.

It seems the floodgates of equipment testing have opened up a bit for Cantlay, who was also spotted testing a custom Scotty Cameron blade putter on Tuesday this week. By Wednesday, Cantlay was back practicing with his familiar Scotty Cameron T5 Proto mallet, but it’s certainly something to keep an eye on going forward.

Daniel Berger’s custom Jailbird site lines

Berger, who’s currently using Odyssey’s Ai-One Mini Jailbird mallet putter, has a unique 3-dot, 2-line alignment on the crown of his navy-white-navy-white mallet putter. Looking down at the putter, it’s easy to see why this alignment system would help; it just seems impossible to set up to the ball off-center, or misaligned to the target.

Also, for anyone worried, you can rest easy. Yes, he’s still playing the 2013 TaylorMade TP MC irons, which we highlighted in our recent “Modern Classics: Old vs. New” video testing series.

FitzMagic teams back up

Brothers Matthew and Alex Fitzpatrick are teaming up once again at the Zurich this year, and Bettinardi Golf hooked them up with some festive “FitzMagic” headcovers to match this week.

See what else is in Alex Fitzpatrick’s WITB here

And, with that, we say goodbye to the Zurich Classic in New Orleans. Don’t forget to check out all of our photos from this week, including 30 unique photo galleries full of equipment photos.

We’ll see you next week in Texas for the 2024 CJ Cup Byron Nelson!

Your Reaction?