Equipment
TaylorMade’s new M3 and M4 irons, with “RibCOR” technology
With its new M3 and M4 irons, TaylorMade has introduced a “RibCOR” technology that’s designed to produce more speed on mishits. Before we get into what exactly that design is, let’s see why this concept is important.
COR, or coefficient of restitution, is the measure of energy transfer between two objects. For golf club manufacturers, especially when making game-improvement irons, the goal is to get COR as high as possible; this means ensuring as much energy gets transferred from the club face to the golf ball as possible during impact. Of course, the USGA sets a limit on COR of golf clubs so they can only go so far.
Many companies these days have figured out how to maximize COR on the center of the club face. Now, the game for engineers across the industry has become “how high can we make COR on shots hit off-center.” The goal obviously being to produce as much speed on off-center hits as possible, or, minimizing energy loss at impact.
TaylorMade, for its new M3 and M4 irons, has introduced RibCOR technology that uses two ribs, or beams, on the outer portions of the heel and toe as pictured below.
This provides internal support on the outer portions of the club so that the face can flex as much as possible at impact, thus retaining energy transfer from the club the golf ball. So while the center of the face may not produce more speed compared to its M1 and M2 predecessors, this design should impart more ball speed across the face. That means more forgiveness, or MOI (moment of inertia).
The RibCOR design couples with a number of familiar technologies from the company’s past including inverted cone technology, speed pockets and face slots. These are all designed for to produce higher ball speeds and more forgiveness, helping golfers who don’t hit the center of the face every time to launch the ball high and far.
As with the M1 and M2 irons they replace, the lower-numbered M3 iron has a more compact look and is designed for slightly better players, whereas the higher-numbered M4 iron is built for more distance and forgiveness, and has a larger head profile.
For more photos and discussion click here, or read below for more info on each of the offerings. Both the M3 and M4 irons will be available at retail on February 16.
Taylormade M4 irons
As the more forgiving of the two M-family offerings, TaylorMade’s M4 irons have fluted hosels, 1mm toplines, and what TaylorMade calls its “thinnest ever leading edge.” Also, along with the RibCOR technology that’s in both the M3 and M4 irons, additional mass has been placed on the toe and heel portions of the M4 irons to produce great forgiveness on off-center hits.
Overall, the M4 club heads have 24 percent higher MOI than the M2 2017 heads, according to TaylorMade, so golfers will find them to be more forgiving than their predecessors.
The M4 irons (4-LW) will come stock with either KBS Max 85 steel shafts (R and S flex), Fujikura Atmos shafts (5A, 6R, 7S), or additional custom shafts, with TM Dual Feel grips. Steel will sell for $899 per set, while graphite will sell for $999.
Taylormade M3 irons
The TaylorMade M3 irons, while housing some of the same technologies as the M4 irons, are made for those players who want a more compact shape and are looking for more trajectory control. To help achieve this look without sacrificing much by way of forgiveness, TaylorMade ha added a 15-gram tungsten weight to the soles of the M3 irons; this lowers CG in the head.
The irons have a 180-degree fluted hosel — that means it’s not as visible at address compared to the 360-degree fluted hosel in the M4 irons — to help move weight away from the heel. The irons have a thinner topline than the M1 irons they replace, according to TaylorMade, and have soles designed with more bounce for better turf interaction.
M3 sets (3-SW) come stock with either True Temper XP100 steel shafts (R300, S300), Mitsubishi’s Tensei graphite shafts (70R or 80S), or additional custom shafts, and with Lamkin UTx NC grips. M3 irons will sell for $999 with steel shafts or $1199 with graphite.
Click here for more photos and discussion on the M3 and M4 irons
- LIKE95
- LEGIT11
- WOW7
- LOL9
- IDHT4
- FLOP11
- OB7
- SHANK118
Whats in the Bag
Rory McIlroy’s winning WITB: 2024 Wells Fargo Championship
Driver: TaylorMade Qi10 (9 degrees @8.25) Buy here.
Shaft: Fujikura Ventus Black 6 X
3-wood: TaylorMade Qi10 (15 degrees) Buy here.
Shaft: Fujikura Ventus Black 8 X
5-wood: TaylorMade Qi10 (18 degrees) Buy here.
Shaft: Fujikura Ventus Black 9 X
Irons: TaylorMade Proto (4), TaylorMade Rors Proto (5-9) Buy here.
Shaft: Project X 7.0 (4-9)
Wedges: TaylorMade MG4 (46-09SB, 50-09SB, 54-11SB) Buy here, Titleist Vokey Design WedgeWorks (58-K @59) Buy here.
Shafts: Project X 6.5 (46-54), Project X 6.5 Wedge (60)
Putter: TaylorMade Spider Tour X3 Buy here.
Grip: SuperStroke Zenergy Pistol Tour
Ball: 2024 TaylorMade TP5x Buy here.
Grips: Golf Pride MCC
Check out more in-hand photos of Rory McIlroy’s WITB in the forums.
View this post on Instagram
The winning WITB is presented by 2nd Swing Golf. 2nd Swing has more than 100,000 new and pre-swung golf clubs available in six store locations and online. Check them out here.
- LIKE11
- LEGIT2
- WOW1
- LOL0
- IDHT0
- FLOP0
- OB0
- SHANK1
Whats in the Bag
Kevin Tway WITB 2024 (May)
- Kevin Tway what’s in the bag accurate as of the Wells Fargo Championship. More photos from the event here.
Driver: Ping G430 LST (10.5 degrees)
Shaft: Fujikura Ventus Black 6 X
3-wood: TaylorMade Stealth 2 (15 degrees)
Shaft: Mitsubishi Diamana D+ 80 TX
5-wood: TaylorMade Stealth 2 (18 degrees)
Shaft: Mitsubishi Diamana D+ 90 TX
Irons: Wilson Staff Utility (2), Titleist T100 (4-9)
Shafts: Mitsubishi MMT 100 TX (2), True Temper Dynamic Gold Tour Issue X100 (4-9)
Wedges: Titleist Vokey Design SM10 (48-10F @47, 52-12F @51, 56-14F), SM7 (60-10S)
Shafts: True Temper Dynamic Gold Tour Issue X100 (48-56), True Temper Dynamic Gold Tour Issue S400 (60)
Putter: Scotty Cameron T-5 Proto
Grip: Scotty Cameron Black Baby T
Grips: Golf Pride Tour Velvet Plus4
More photos of Kevin Tway’s WITB in the forums.
- LIKE5
- LEGIT0
- WOW0
- LOL0
- IDHT0
- FLOP0
- OB0
- SHANK0
Equipment
Did Rory McIlroy inspire Shane Lowry’s putter switch?
Editor’s note: This is an excerpt from a piece our Andrew Tursky originally wrote for PGATour.com’s Equipment Report. Head over there for the full article.
The timing of Lowry’s putter changeup was curious: Was he just using a Spider putter because he was paired with McIlroy, who’s been using a Spider Tour X head throughout 2024? Was Lowry just being festive because it’s the Zurich Classic, and he wanted to match his teammate? Did McIlroy let Lowry try his putter, and he liked it so much he actually switched into it?
Well, as it turns out, McIlroy’s only influence was inspiring Lowry to make more putts.
When asked if McIlroy had an influence on the putter switch, Lowry had this to say: “No, it’s actually a different putter than what he uses. Maybe there was more pressure there because I needed to hole some more putts if we wanted to win,” he said with a laugh.
To Lowry’s point, McIlroy plays the Tour X model, whereas Lowry switched into the Tour Z model, which has a sleeker shape in comparison, and the two sole weights of the club are more towards the face.
Lowry’s Spider Tour Z has a white True Path Alignment channel on the crown of his putter, which is reminiscent of Lowry’s former 2-ball designs, thus helping to provide a comfort factor despite the departure from his norm. Instead of a double-bend hosel, which Lowry used in his 2-ball putters, his new Spider Tour Z is designed with a short slant neck.
“I’ve been struggling on the greens, and I just needed something with a fresh look,” Lowry told GolfWRX.com on Wednesday at the 2024 Wells Fargo Championship. “It has a different neck on it, as well, so it moves a bit differently, but it’s similar. It has a white line on the back of it [like my 2-ball], and it’s a mallet style. So it’s not too drastic of a change.
“I just picked it up on the putting green and I liked the look of it, so I was like, ‘Let’s give it a go.’”
Read the rest of the piece over at PGATour.com.
- LIKE4
- LEGIT1
- WOW0
- LOL1
- IDHT0
- FLOP0
- OB0
- SHANK2
-
19th Hole3 weeks ago
Justin Thomas on the equipment choice of Scottie Scheffler that he thinks is ‘weird’
-
19th Hole3 weeks ago
‘Absolutely crazy’ – Major champ lays into Patrick Cantlay over his decision on final hole of RBC Heritage
-
19th Hole2 weeks ago
LET pro gives detailed financial breakdown of first week on tour…and the net result may shock you
-
19th Hole6 days ago
Report: LIV star turns down PGA Championship invite due to ‘personal commitments’
-
19th Hole2 weeks ago
Gary Player claims this is what ‘completely ruined’ Tiger Woods’ career
-
Equipment5 days ago
Details on Justin Thomas’ driver switch at the Wells Fargo Championship
-
Whats in the Bag2 weeks ago
Team McIlowry (Rory McIlroy, Shane Lowry) winning WITBs: 2024 Zurich Classic
-
Whats in the Bag6 days ago
Keegan Bradley WITB 2024 (May)
S
Jan 9, 2018 at 12:26 pm
I can see why pros are leaving TM…
ran
Jan 30, 2018 at 10:11 am
Wonder if the M3 and M4 have the same face caving issue that the M1/M2 irons have…..many people reporting face cave on irons….TM just replaces them with same iroins that eventually cave again.
Tom Newsted
Jan 3, 2018 at 10:52 am
RIBCORE they stole that from their time with Addidas. That has been on a hockey stick for years. its a gimmick.
mel
Jan 2, 2018 at 8:32 pm
TM M3 and M4 state-of-the-art iron designs look like winners to me, and leaving behind all those offering gel-filled hollow irons …. opps that means the P790 are obsolete now …lol … that was fast … lolol
George
Jan 2, 2018 at 12:33 pm
i need me some ribcor