Connect with us

Equipment

Spotted: Titleist’s new Vokey SM7 wedges

Published

on

As promised by Bob Vokey on our new 19th Hole podcast (around the 19-minute mark), Titleist has unveiled its new Vokey SM7 wedges at the Shriner Hospitals for Children Open in Las Vegas. We have so many in-hand photos of the new wedges they needed to be broken up into two photo albums; here’s Part 1 and Part 2 of the photos.

SM6 (left) vs new SM7

VokeySM7wedgesWRX

From the photos, we can tell that Titleist is sticking with it’s progressive center of gravity (CG) design that was featured in its SM6 wedges, highlighted by the curves on the back cavities of the new SM7 wedges. Although in this year’s model — at least when comparing the 46-degree F Grinds — it appears the curve is going in the opposite direction, possibly relocating the CG for different launch, flight characteristics and spin.

Among some aesthetic changes, such as the placement of grind stampings, Titleist is also apparently introducing a new “D” grind into this lineup. Some GolfWRX members speculate it could stand for “Dill,” as in Titleist’s PGA Tour rep and grind master Aaron Dill, or as in PGA Tour player and major champion Jason Dufner, who uses a unique grind in his wedges.

e74c9587c333520b48de1b455148b8e9

We’ll be on the lookout for more information on design, specs and release dates for the new SM7 wedges, but for now, enjoy the photos from Las Vegas.

More Photos of the SM7 wedges

Discussion: See what GolfWRX members are saying about the SM7 wedges in Pt. 1 and Pt. 2 in our forums

Your Reaction?
  • 169
  • LEGIT25
  • WOW16
  • LOL8
  • IDHT3
  • FLOP8
  • OB6
  • SHANK59

We share your golf passion. You can follow GolfWRX on Twitter @GolfWRX, Facebook and Instagram.

21 Comments

21 Comments

  1. Acew7iron

    Oct 31, 2017 at 2:50 pm

    jwowzer…ban is for USGA sanctioned events and amateurs can play the old grooves until 2022. guess your a pro though, so don’t you already have the SM8s?

    By then Ill have the face as smooth as babys bottom and ready to buy a 6 yo SM7 inlike new condition for $25

  2. Dan

    Oct 31, 2017 at 1:42 pm

    Looks great!! I really wish Bob will produce the entire Iron range with his wedge design before he retires.

  3. Bob Jacobs

    Oct 31, 2017 at 12:53 pm

    looks like just another wedge to me…tough to get all that excited

  4. C.B.

    Oct 31, 2017 at 3:04 am

    No CBs? Where’s the Cleveland copy from Titleist? I need to make my AP1 set complete and I need a set of AP1 type wedge in SW and LW. lol

  5. TigerMom

    Oct 30, 2017 at 8:39 pm

    The SM6 looks frowny 🙁 and the SM7 looks smiley 🙂

  6. ronnie

    Oct 30, 2017 at 8:34 pm

    Awesome Vokey’s and I want them in my Fantasy WITB

  7. Acew7iron

    Oct 30, 2017 at 5:09 pm

    So I just purchased a 06 model Vokey 200 series 60 deg wedge off ebay for $25 in like new condition.

    What is *better about this one than what Im bagging?

    • Steve

      Oct 30, 2017 at 5:39 pm

      It’s Vokey/Titleist “brand new” and the latest shiny bright Vokey Design.
      Yours is old and second hand and has no new mojo designed into it by Vokey Design.
      Otherwise, there is no significant difference if you are a decent golfer and you don’t flaunt your WITB.

    • Jwowzer

      Oct 30, 2017 at 5:41 pm

      The SM7 wedges are conforming to the rules, whereas yours is not. Hope you don’t plan on playing in any events ever.

      • Dat

        Oct 30, 2017 at 8:45 pm

        jwowzer…ban is for USGA sanctioned events and amateurs can play the old grooves until 2022. guess your a pro though, so don’t you already have the SM8s?

        • Chuck

          Oct 31, 2017 at 4:21 am

          2024 actually. And even then, the decision of the USGA might be to just let it go anyway.

          Remember that the old grooves have never been made illegal. The USGA imposed its rule only on wedges built after a certain date. (After 12/31/10, if memory serves me.) And only via a “condition of competition,” which the USGA recommends be utilized only in elite-level competitions.

          • Darryl

            Nov 16, 2017 at 7:53 am

            As I’m given to understand also, the onus is on the tournament committee to prove your club is non conforming, which means they need to have the (no doubt very expensive) test rig.

            Someone may correct me on that.

            Either way my Mizuno TP 2000’s are good until 2024 :-))

  8. Stinger26

    Oct 30, 2017 at 4:51 pm

    still no forged offerings. much of the same.

    • The dude

      Oct 30, 2017 at 8:45 pm

      Why do you want a forged wedge?.

      • Steve Sands

        Oct 30, 2017 at 10:44 pm

        Everybody wants a Forged wedge….why don’t you? We’ve been asking Vokey forever, and he makes them for the Japanese market which is much smaller than the USA market. Have you ever hit a Callaway X Forged wedges flush or a Mizuno MP series? There is no comparing a Forged wedge to the cast.

        • The dude

          Oct 31, 2017 at 8:50 am

          ….I knew you’d say that….point is..you don’t know the difference…(don’t bother saying you do)….with a high lofted club…it’s almost impossible to distinguish. And Cast has the benefit of durability for amateurs. Also…Why do you think so many tour players use Vokes?

        • Pat

          Dec 8, 2017 at 11:24 am

          Steve Sands, cost. Would you buy a set of 3 wedges at $350 each JUST because they’re forged?

  9. Geof

    Oct 30, 2017 at 3:51 pm

    this is a joke!

Leave a Reply

Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Whats in the Bag

Steve Stricker WITB 2024 (April)

Published

on

Driver: Titleist TSR3 (9 degrees, C4 SureFit setting)
Shaft: Fujikura Motore Speeder VC 7.2 X

3-wood: Titleist 915F (13.5 degrees)
Shaft: Mitsubishi Tensei CK Pro White 80 TX

Hybrid: Titleist 816 H1 (17 degrees)
Shaft: Fujikura Motore Speeder VC 9.2 X

Irons: Titleist T200 (3, 4), Titleist T100 (5-9)
Shafts: Project X 6.5

Wedges: Titleist Vokey SM8 (46-10F @55), Titleist Vokey SM10 (54-10S @53), Titleist Vokey SM4 (60 @59)
Shafts: True Temper Dynamic Gold X100 w/Sensicore

Putter: Odyssey White Hot No. 2

Ball: Titleist Pro V1x

Grips: Golf Pride Tour Velvet Grip Rite

Check out more in-hand photos of Steve Stricker’s clubs here.

Your Reaction?
  • 4
  • LEGIT0
  • WOW0
  • LOL0
  • IDHT1
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

Whats in the Bag

Alex Fitzpatrick WITB 2024 (April)

Published

on

  • Alex Fitzpatrick what’s in the bag accurate as of the Zurich Classic. 

Driver: Ping G430 LST (10.5 degrees)
Shaft: Fujikura Ventus Black 6 X

3-wood: TaylorMade Qi10 (15 degrees)
Shaft: Fujikura Ventus TR Black 7 X

Hybrid: Ping G430 (19 degrees)
Shaft: Fujikura Ventus Black HB 10 TX

Irons: Ping iCrossover (2), Titleist T100 (4-PW)
Shafts: Fujikura Ventus Black HB 9 TX (2), Nippon N.S. Pro Modus 3 Tour 120 X (4-9)

Wedges: Titleist Vokey Design SM10 (50-12F, 56-12D, 60-08M)
Shafts: Nippon N.S. Pro Modus 3 Tour 120 X

Putter: Bettinardi SS16 Dass

Grips: Golf Pride MCC

Check out more in-hand photos of Alex Fitzpatrick’s clubs here.

Your Reaction?
  • 2
  • LEGIT0
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

Equipment

What’s the perfect mini-driver/shaft combo? – GolfWRXers discuss

Published

on

In our forums, our members have been discussing Mini-Drivers and accompanying shafts. WRXer ‘JamesFisher1990’ is about to purchase a BRNR Mini and is torn on what shaft weight to use, and our members have been sharing their thoughts and set ups in our forum.

Here are a few posts from the thread, but make sure to check out the entire discussion and have your say at the link below.

  • PARETO: “New BRNR at 13.5. Took it over to TXG (Club Champ but TXG will always rule) in Calgary for a fit. Took the head down to 12, stuck in a Graphite Design AD at 3 wood length and 60g. Presto- numbers that rivaled my G430Max but with waaaaay tighter dispersion. Win.”
  • driveandputtmachine: “Still playing a MIni 300.  The head was only 208, so I ordered a heavier weight and play it at 3 wood length.  I am playing a Ventus Red 70.   I play 70 grams in my fairways.  I use it mainly to hit draws off the tee.  When I combine me, a driver, and trying to hit a draw it does not work out well most of the time.  So the MIni is for that. As an aside, I have not hit the newest BRNR, but the previous model wasn’t great off the deck.  The 300 Mini is very good off the deck.”
  • JAM01: “Ok, just put the BRNR in the bag along side a QI10 max and a QI10 3 wood. A load of top end redundancy. But, I have several holes at my two home courses where the flight and accuracy of the mini driver helps immensely. Mine is stock Proforce 65 at 13.5, I could see a heavier shaft, but to normal flex, as a nice alternative.”

Entire Thread: “What’s the perfect Mini-Driver/Shaft combo? – GolfWRXers discuss”

Your Reaction?
  • 3
  • LEGIT1
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK4

Continue Reading

WITB

Facebook

Trending