Equipment
Vokey releases SM6 V Grind on WedgeWorks
Last July, I had the opportunity to be fit for wedges by Bob Vokey, the wedge guru behind Titleist’s Vokey wedges. It was an incredible learning experience, which I detailed in my in-depth review of the Vokey’s SM6 wedges. Vokey decided the best lob wedge for me was a V Grind, which I had to custom order through Titleist since it wasn’t part of the retail SM5 line. So Vokey’s decision to release a V Grind SM6 wedge through WedgeWorks has personal significance.
Like other SM6 wedges, the SM6 V Grind has the company’s new progressive center of gravity design to improve consistency. As I’ve learned since my fitting, there’s legion of golfers who prize their V Grind wedges more than any other club in their bag — both amateurs and Tour players. What makes the V Grind work so well for them and me is its dual-bounce design, which has a high measured bounce forward on the sole. On square shots, it keeps the leading edge from digging, which is great for golfers with steeper attack angles. On open-face shots, however, a V-Grind plays like a much lower-bounce wedge, with a heavily relieved heel, toe and trailing edge areas to help golfers hit lobs and flops from tight lies.
“The forward bounce of the V Grind is essential in helping players lower ball flight on full and square faced shots,” says Vokey Tour Rep Aaron Dill. “The grind in the back of the wedge allows players to open the wedge and hug the ground a little easier for tight lies around the green. Tour players are always looking for lower flight, but still need to have options around the green when hitting off of firm, tight turf.”
According to Bob Vokey, the decision to release the V Grind to the public was prompted by requests from the Tour. Many players like the shape of the M grind, which is a stock option, but desired more bounce.
“It got me thinking about one of my original grinds, Vokey said. “The V Grind is one design that provides more bounce forward on the sole, with enhanced relief in the heel, trailing edge and toe. It’s a really versatile wedge around the green.”
Whether you’re a V Grind candidate or not, keep in mind that added bounce on a wedge tends to lower impact point on the face, which lowers trajectory and increases spin. For drivers, that’s usually a bad thing, but for better players, it’s a great thing for their wedge game.
The V Grind wedges ($195 each) are available in two finishes (Brushed Chrome and Oil Can) and lofts of 54 (RH only) 56 (RH only), 58 and 60 degrees. As part of WedgeWorks, the V Grind wedges can be customized with personalized stamping up to eight characters and one of 12 paint fill colors. Golfers can choose from four toe engravings with custom paint fill options, as well as a wide selection of custom shafts, grips, shaft bands and ferrules. Learn more at vokey.com.
Titleist Tour players currently using the Vokey V Grind include Robert Streb, John Peterson and Ben Crane.
- LIKE130
- LEGIT9
- WOW9
- LOL0
- IDHT1
- FLOP2
- OB2
- SHANK5
Whats in the Bag
Steve Stricker WITB 2024 (April)
- Steve Stricker WITB accurate as of the Zurich Classic. More photos from the event here.
Driver: Titleist TSR3 (9 degrees, C4 SureFit setting)
Shaft: Fujikura Motore Speeder VC 7.2 X
3-wood: Titleist 915F (13.5 degrees)
Shaft: Mitsubishi Tensei CK Pro White 80 TX
Hybrid: Titleist 816 H1 (17 degrees)
Shaft: Fujikura Motore Speeder VC 9.2 X
Irons: Titleist T200 (3, 4), Titleist T100 (5-9)
Shafts: Project X 6.5
Wedges: Titleist Vokey SM8 (46-10F @55), Titleist Vokey SM10 (54-10S @53), Titleist Vokey SM4 (60 @59)
Shafts: True Temper Dynamic Gold X100 w/Sensicore
Putter: Odyssey White Hot No. 2
Ball: Titleist Pro V1x
Grips: Golf Pride Tour Velvet Grip Rite
Check out more in-hand photos of Steve Stricker’s clubs here.
- LIKE5
- LEGIT0
- WOW0
- LOL0
- IDHT1
- FLOP0
- OB0
- SHANK0
Whats in the Bag
Alex Fitzpatrick WITB 2024 (April)
- Alex Fitzpatrick what’s in the bag accurate as of the Zurich Classic.
Driver: Ping G430 LST (10.5 degrees)
Shaft: Fujikura Ventus Black 6 X
3-wood: TaylorMade Qi10 (15 degrees)
Shaft: Fujikura Ventus TR Black 7 X
Hybrid: Ping G430 (19 degrees)
Shaft: Fujikura Ventus Black HB 10 TX
Irons: Ping iCrossover (2), Titleist T100 (4-PW)
Shafts: Fujikura Ventus Black HB 9 TX (2), Nippon N.S. Pro Modus 3 Tour 120 X (4-9)
Wedges: Titleist Vokey Design SM10 (50-12F, 56-12D, 60-08M)
Shafts: Nippon N.S. Pro Modus 3 Tour 120 X
Putter: Bettinardi SS16 Dass
Grips: Golf Pride MCC
Check out more in-hand photos of Alex Fitzpatrick’s clubs here.
- LIKE2
- LEGIT0
- WOW0
- LOL0
- IDHT0
- FLOP0
- OB0
- SHANK0
Equipment
What’s the perfect mini-driver/shaft combo? – GolfWRXers discuss
In our forums, our members have been discussing Mini-Drivers and accompanying shafts. WRXer ‘JamesFisher1990’ is about to purchase a BRNR Mini and is torn on what shaft weight to use, and our members have been sharing their thoughts and set ups in our forum.
Here are a few posts from the thread, but make sure to check out the entire discussion and have your say at the link below.
- PARETO: “New BRNR at 13.5. Took it over to TXG (Club Champ but TXG will always rule) in Calgary for a fit. Took the head down to 12, stuck in a Graphite Design AD at 3 wood length and 60g. Presto- numbers that rivaled my G430Max but with waaaaay tighter dispersion. Win.”
- driveandputtmachine: “Still playing a MIni 300. The head was only 208, so I ordered a heavier weight and play it at 3 wood length. I am playing a Ventus Red 70. I play 70 grams in my fairways. I use it mainly to hit draws off the tee. When I combine me, a driver, and trying to hit a draw it does not work out well most of the time. So the MIni is for that. As an aside, I have not hit the newest BRNR, but the previous model wasn’t great off the deck. The 300 Mini is very good off the deck.”
- JAM01: “Ok, just put the BRNR in the bag along side a QI10 max and a QI10 3 wood. A load of top end redundancy. But, I have several holes at my two home courses where the flight and accuracy of the mini driver helps immensely. Mine is stock Proforce 65 at 13.5, I could see a heavier shaft, but to normal flex, as a nice alternative.”
Entire Thread: “What’s the perfect Mini-Driver/Shaft combo? – GolfWRXers discuss”
- LIKE3
- LEGIT1
- WOW0
- LOL0
- IDHT0
- FLOP0
- OB0
- SHANK4
-
19th Hole2 weeks ago
Dave Portnoy places monstrous outright bet for the 2024 Masters
-
19th Hole4 days ago
Justin Thomas on the equipment choice of Scottie Scheffler that he thinks is ‘weird’
-
19th Hole2 weeks ago
Tiger Woods arrives at 2024 Masters equipped with a putter that may surprise you
-
19th Hole4 days ago
‘Absolutely crazy’ – Major champ lays into Patrick Cantlay over his decision on final hole of RBC Heritage
-
19th Hole2 weeks ago
Two star names reportedly blanked Jon Rahm all week at the Masters
-
19th Hole1 week ago
Report: LIV Golf identifies latest star name they hope to sign to breakaway tour
-
19th Hole2 weeks ago
Neal Shipley presser ends in awkward fashion after reporter claims Tiger handed him note on 8th fairway
-
19th Hole1 week ago
Brandel Chamblee has ‘no doubt’ who started the McIlroy/LIV rumor and why
mitch
Jun 16, 2016 at 2:21 pm
I will stick with edel!
Joshuaplaysgolf
Jun 16, 2016 at 12:19 pm
I’m not really understanding. It’s pretty frustrating that they are slow-releasing grinds when they already had them at their disposal. Probably would have been a really good fit for me, but I already dropped $500 on 3 new vokeys this year. No way I’m about to run around and drop $195, plus custom shafts to get this grind. Why is it $45 more than the other grinds? Does it cost more to produce this grind?? (Honest question, not rhetorical) I’ve been a Titleist guy for years, but this doesn’t make much sense to me. Not a lot of people are shopping for golf clubs in the middle of the season.
Rand
Jun 15, 2016 at 5:56 pm
Cheap, hard 8620 cast by the thousands for way too much money. Unfortunately callaway feel into this with the MD3 line. If the fan boys wouldn’t buy vokeys for the name they would lower the price.
Chuck D
Jun 15, 2016 at 4:47 pm
+1 Nolanski!
Juan Carlos
Jun 15, 2016 at 11:24 am
Looks like the Clevelands that were leaked last week.
leon
Jun 15, 2016 at 11:04 am
Way over priced and feels harsh. The wedges from mizuno, bridgestone or other forged ones from Japan feel much much more softer, aliveness and responsive. And they perform exactly as good as Vokey’s
Jafar
Jun 15, 2016 at 10:50 am
So which grind does the v grind compare to ?
Zak Kozuchowski
Jun 15, 2016 at 11:06 am
It’s similar to an M Grind, but with more bounce and more aggressive relief.
Jafar
Jun 15, 2016 at 12:25 pm
Is it a good club for sand shots? or would I be better off with a k grind rather then a V.. Thanks for the response
CW
Jun 15, 2016 at 10:09 am
Oil can for the love of all that is sacred!
Squirt
Jun 16, 2016 at 9:56 am
That’s what I’m talkin about!
matt_bear
Jun 15, 2016 at 9:34 am
nice job leaving the lefties out…again. :-\
Grinding
Jun 15, 2016 at 9:30 am
$195? Whatever. Just re-release the oil can and get this to the public for the same price as all the other grinds. Give the people what they want!
Nolanski
Jun 15, 2016 at 8:30 am
Cool but pricey. I play super soft fairways so the S grind will suffice for my game.