Connect with us

Equipment

Vokey releases SM6 V Grind on WedgeWorks

Published

on

Last July, I had the opportunity to be fit for wedges by Bob Vokey, the wedge guru behind Titleist’s Vokey wedges. It was an incredible learning experience, which I detailed in my in-depth review of the Vokey’s SM6 wedges. Vokey decided the best lob wedge for me was a V Grind, which I had to custom order through Titleist since it wasn’t part of the retail SM5 line. So Vokey’s decision to release a V Grind SM6 wedge through WedgeWorks has personal significance.

V-Grind-54TC-60OC

Like other SM6 wedges, the SM6 V Grind has the company’s new progressive center of gravity design to improve consistency. As I’ve learned since my fitting, there’s legion of golfers who prize their V Grind wedges more than any other club in their bag — both amateurs and Tour players. What makes the V Grind work so well for them and me is its dual-bounce design, which has a high measured bounce forward on the sole. On square shots, it keeps the leading edge from digging, which is great for golfers with steeper attack angles. On open-face shots, however, a V-Grind plays like a much lower-bounce wedge, with a heavily relieved heel, toe and trailing edge areas to help golfers hit lobs and flops from tight lies.

Vokey V Grind 60° TC RH

“The forward bounce of the V Grind is essential in helping players lower ball flight on full and square faced shots,” says Vokey Tour Rep Aaron Dill. “The grind in the back of the wedge allows players to open the wedge and hug the ground a little easier for tight lies around the green. Tour players are always looking for lower flight, but still need to have options around the green when hitting off of firm, tight turf.”

According to Bob Vokey, the decision to release the V Grind to the public was prompted by requests from the Tour. Many players like the shape of the M grind, which is a stock option, but desired more bounce.

Vokey V Grind 58° OC RH

“It got me thinking about one of my original grinds, Vokey said. “The V Grind is one design that provides more bounce forward on the sole, with enhanced relief in the heel, trailing edge and toe. It’s a really versatile wedge around the green.”

Whether you’re a V Grind candidate or not, keep in mind that added bounce on a wedge tends to lower impact point on the face, which lowers trajectory and increases spin. For drivers, that’s usually a bad thing, but for better players, it’s a great thing for their wedge game.

Vokey V Grind-1

The V Grind wedges ($195 each) are available in two finishes (Brushed Chrome and Oil Can) and lofts of 54 (RH only) 56 (RH only), 58 and 60 degrees. As part of WedgeWorks, the V Grind wedges can be customized with personalized stamping up to eight characters and one of 12 paint fill colors. Golfers can choose from four toe engravings with custom paint fill options, as well as a wide selection of custom shafts, grips, shaft bands and ferrules. Learn more at vokey.com.

Titleist Tour players currently using the Vokey V Grind include Robert Streb, John Peterson and Ben Crane.

Your Reaction?
  • 130
  • LEGIT9
  • WOW9
  • LOL0
  • IDHT1
  • FLOP2
  • OB2
  • SHANK5

14 Comments

14 Comments

  1. mitch

    Jun 16, 2016 at 2:21 pm

    I will stick with edel!

  2. Joshuaplaysgolf

    Jun 16, 2016 at 12:19 pm

    I’m not really understanding. It’s pretty frustrating that they are slow-releasing grinds when they already had them at their disposal. Probably would have been a really good fit for me, but I already dropped $500 on 3 new vokeys this year. No way I’m about to run around and drop $195, plus custom shafts to get this grind. Why is it $45 more than the other grinds? Does it cost more to produce this grind?? (Honest question, not rhetorical) I’ve been a Titleist guy for years, but this doesn’t make much sense to me. Not a lot of people are shopping for golf clubs in the middle of the season.

  3. Rand

    Jun 15, 2016 at 5:56 pm

    Cheap, hard 8620 cast by the thousands for way too much money. Unfortunately callaway feel into this with the MD3 line. If the fan boys wouldn’t buy vokeys for the name they would lower the price.

  4. Chuck D

    Jun 15, 2016 at 4:47 pm

    +1 Nolanski!

  5. Juan Carlos

    Jun 15, 2016 at 11:24 am

    Looks like the Clevelands that were leaked last week.

  6. leon

    Jun 15, 2016 at 11:04 am

    Way over priced and feels harsh. The wedges from mizuno, bridgestone or other forged ones from Japan feel much much more softer, aliveness and responsive. And they perform exactly as good as Vokey’s

  7. Jafar

    Jun 15, 2016 at 10:50 am

    So which grind does the v grind compare to ?

    • Zak Kozuchowski

      Jun 15, 2016 at 11:06 am

      It’s similar to an M Grind, but with more bounce and more aggressive relief.

      • Jafar

        Jun 15, 2016 at 12:25 pm

        Is it a good club for sand shots? or would I be better off with a k grind rather then a V.. Thanks for the response

  8. CW

    Jun 15, 2016 at 10:09 am

    Oil can for the love of all that is sacred!

  9. matt_bear

    Jun 15, 2016 at 9:34 am

    nice job leaving the lefties out…again. :-\

  10. Grinding

    Jun 15, 2016 at 9:30 am

    $195? Whatever. Just re-release the oil can and get this to the public for the same price as all the other grinds. Give the people what they want!

  11. Nolanski

    Jun 15, 2016 at 8:30 am

    Cool but pricey. I play super soft fairways so the S grind will suffice for my game.

Leave a Reply

Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Equipment

Coolest thing for sale in the GolfWRX Classifieds (4/18/24): TaylorMade BRNR mini driver head

Published

on

At GolfWRX, we are a community of like-minded individuals that all experience and express our enjoyment of the game in many ways.

It’s that sense of community that drives day-to-day interactions in the forums on topics that range from best driver to what marker you use to mark your ball. It even allows us to share another thing we all love – buying and selling equipment.

Currently, in our GolfWRX buy/sell/trade (BST) forum, there is a listing for a TaylorMade BRNR mini driver head

From the seller: (@lasallen): “For sale is a BRNR mini 11.5 deg head only in brand new condition.  $325 shipped.”

To check out the full listing in our BST forum, head through the link: TaylorMade BRNR mini driver head 

This is the most impressive current listing from the GolfWRX BST, and if you are curious about the rules to participate in the BST Forum you can check them out here: GolfWRX BST Rules

Your Reaction?
  • 0
  • LEGIT0
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

Equipment

Coolest thing for sale in the GolfWRX Classifieds (4/18/24): Ping PLD Limited Anser – 1988 Open Championship – #2 of only 88 Made

Published

on

At GolfWRX, we are a community of like-minded individuals that all experience and express our enjoyment of the game in many ways.

It’s that sense of community that drives day-to-day interactions in the forums on topics that range from best driver to what marker you use to mark your ball. It even allows us to share another thing we all love – buying and selling equipment.

Currently, in our GolfWRX buy/sell/trade (BST) forum, there is a listing for a Ping PLD Limited Anser – 1988 Open Championship – #2 of only 88 Made.

From the seller: (@DLong72): “Ping PLD Limited Anser – 1988 Open Championship – #2 of only 88 Made. ?: $1150. ?? 100% milled collectors item from the limited releases commemorating when Ping putters won every major in 1988 (88 putters made). This was the model Seve Ballesteros used to win the 1988 Open Championship. Condition is brand new, never gamed, everything is in the original packaging as it came. Putter features the iconic sound slot.

Specs/ Additional Details

-100% Milled, Aluminum/Bronze Alloy (310g)

-Original Anser Design

-PING PP58 Grip

-Putter is built to standard specs.”

To check out the full listing in our BST forum, head through the link: Ping PLD Limited Anser – 1988 Open Championship – #2 of only 88 Made

This is the most impressive current listing from the GolfWRX BST, and if you are curious about the rules to participate in the BST Forum you can check them out here: GolfWRX BST Rules

Your Reaction?
  • 1
  • LEGIT0
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

Equipment

Inside Collin Morikawa’s recent golf ball, driver, 3-wood, and “Proto” iron changes

Published

on

As you probably know by now, Collin Morikawa switched putters after the first round of The Masters, and he ultimately went on to finish T3.

The putter was far from the only change he made last week, however, and his bag is continuing to change this week at the 2024 RBC Heritage.

On the range of The Masters, Morikawa worked closely with Adrian Reitveld, TaylorMade’s Senior Manager of Tour at TaylorMade, to find the perfect driver and 3-wood setups.

Morikawa started off 2024 by switching into TaylorMade’s Qi10 Max driver, but since went back to his faithful TaylorMade SIM – yes, the original SIM from 2020. Somehow, some way, it seems Morikawa always ends up back in that driver, which he used to win the 2020 PGA Championship, and the 2021 Open Championship.

At The Masters, however, Rietveld said the duo found the driver head that allowed “zero compromise” on Morikawa’s preferred fade flight and spin. To match his preferences, they landed on a TaylorMade Qi10 LS 9-degree head, and the lie angle is a touch flatter than his former SIM.

“It’s faster than his gamer, and I think what we found is it fits his desired shot shape, with zero compromise” Rietveld told GolfWRX.com on Wednesday at the RBC Heritage.

Then, to replace his former SIM rocket 3-wood, Morikawa decided to switch into the TaylorMade Qi10 core model 13.5-degree rocket head, with an adjustable hosel.

“He likes the spin characteristics of that head,” Rietveld said. “Now he’s interesting because with Collin, you can turn up at a tournament, and you look at his 3-wood, and he’s changed the setting. One day there’s more loft on it, one day there’s less loft on it. He’s that type of guy. He’s not scared to use the adjustability of the club.

“And I think he felt our titanium head didn’t spin as low as his original SIM. So we did some work with the other head, just because he liked the feel of it. It was a little high launching, so we fit him into something with less loft. It’s a naughty little piece of equipment.” 

In addition to the driver and fairway wood changes, Morikawa also debuted his new “MySymbol” jersey No. 5 TP5x golf ball at The Masters. Morikawa’s choice of symbols is likely tied to his love of the Los Angeles Dodgers baseball team.

Not enough changes for you? There’s one more.

On Wednesday at the 2024 RBC Heritage, Morikawa was spotted with a new TaylorMade “Proto” 4-iron in the bag. If you recall, it’s the same model that Rory McIlroy debuted at the 2024 Valero Texas Open.

According to Morikawa, the new Proto 4-iron will replace his old P-770 hollow-bodied 4-iron.

“I used to hit my P-770 on a string, but sometimes the distance would be a little unpredictable,” Morikawa told GolfWRX.com. “This one launches a touch higher, and I feel I can predict the distance better. I know Rory replaced his P-760 with it. I’m liking it so far.” 

See Morikawa’s full WITB from the 2024 RBC Heritage here. 

Your Reaction?
  • 77
  • LEGIT8
  • WOW2
  • LOL6
  • IDHT2
  • FLOP4
  • OB3
  • SHANK6

Continue Reading

WITB

Facebook

Trending