Equipment
Photos of Cobra prototype irons made for Bryson DeChambeau
News came on Tuesday that amateur standout Bryson DeChambeau entered the 2016 RBC Heritage as a professional, and signed deals with Cobra-Puma (apparel/equipment) and Bridgestone (golf ball).
Although Cobra-Puma reported DeChambeau will play the RBC Heritage with his familiar Edel prototype irons, we spotted single-length Cobra King CB and MB prototype irons made for him, while live at the event.
We do not know if and when these irons will go into play, or if these are the same irons he reportedly played at the 2016 Georgia Cup. But check out more photos of the prototype Cobra irons below.
See what GolfWRX members are saying about the irons here.
See what GolfWRX members are saying about the irons here.
- LIKE194
- LEGIT32
- WOW26
- LOL6
- IDHT4
- FLOP8
- OB6
- SHANK50
Whats in the Bag
Michael Block WITB 2024 (May)
- Michael Block what’s in the bag accurate as of the PGA Championship.
Driver: TaylorMade Qi10 “Dot” (9 degrees @7.5)
Shaft: Fujikura Ventus Black 6 X
3-wood: TaylorMade Qi10 Tour (15 degrees @14.25)
Shaft: 2024 Fujikura Ventus Blue 7 X
5-wood: TaylorMade M5 (19 degrees @17)
Shaft: Mitsubishi Tensei CK Orange 70 TX
Irons: TaylorMade Stealth UDI (4), TaylorMade Proto (5-9)
Shafts: Graphite Design Tour AD DI Hybrid 85 X (4), Project X 6.5 (5-9)
Wedges: TaylorMade Milled Grind 4 (46-09SB, 60 [unconfirmed]), TaylorMade Milled Grind 2 (52-09S, 56)
Shafts: True Temper Dynamic Gold Tour Issue S400
Putter: Odyssey White Hot 2-Ball
Grips: Golf Pride MCC
See the rest of Michael Block’s WITB in the forums.
- LIKE9
- LEGIT0
- WOW0
- LOL0
- IDHT0
- FLOP0
- OB0
- SHANK3
Whats in the Bag
Brooks Koepka WITB 2024 (May)
- Brooks Koepka what’s in the bag accurate as of the PGA Championship.
Driver: TaylorMade Qi10 “Dot” (10.5 degrees @9.75)
Shaft: Mitsubishi Diamana D Limited 60 TX (44.5 inches, tipped 1 inch)
3-wood: TaylorMade M2 Tour HL (16.5 degrees)
Shaft: Mitsubishi Diamana D+ 80 TX
Irons: Nike Vapor Pro (3), Srixon ZX7 Mk II (4-9)
Shaft: Fujikura Pro Tour Spec 95 X (3), True Temper Dynamic Gold Tour Issue X100 (4-9)
Wedges: Cleveland RTX ZipCore Tour Rack Raw (46-10 Mid), RTX6 ZipCore Tour Rack (52-10 Mid, 56-10 Mid, 60-6 Low)
Shaft: True Temper Dynamic Gold Tour Issue X100 (46), True Temper Dynamic Gold Tour Issue S400 (52-60)
Putter: Scotty Cameron T-5.5
Grips: Golf Pride Tour Velvet Cord (Midsize)
Ball: Srixon Z-Star Diamond
Check out more in-hand photos of Brooks Koepka’s clubs here.
- LIKE4
- LEGIT0
- WOW1
- LOL1
- IDHT0
- FLOP0
- OB0
- SHANK1
Equipment
Coolest thing for sale in the GolfWRX Classifieds (5/13/24): Full set of ‘Tiger Slam’ clubs
At GolfWRX, we are a community of like-minded individuals that all experience and express our enjoyment of the game in many ways.
It’s that sense of community that drives day-to-day interactions in the forums on topics that range from best driver to what marker you use to mark your ball. It even allows us to share another thing we all love – buying and selling equipment.
Currently, in our GolfWRX buy/sell/trade (BST) forum, there is a listing for a full set of ‘Tiger Slam’ clubs.
From the seller: (@CaymanS): “During the year of recovery from leg surgery that never quite healed, I was bored. One thing led to another, and I ended up gradually building/acquiring the individual pieces to complete a set of “Tiger Slam” clubs. They are what Tiger played to win 4 consecutive majors, which nobody has ever done. This is not an exact replica of course, but something close that fit me to play a few times per year and experience what Tiger did. But my bad leg, 4 shoulder tears, and age prevents me from the ball-striking needed to enjoy these to their fullest. They may not be everyone’s cup of tea, especially since the driver and fairway shafts are regular flex and most players good enough to play these will need to change them, but it’s not a perfect world. I am not a historian on this stuff, but my research indicates these are the same models Tiger used, with slightly different specs to fit me.
Full set $1,600, or…
…a donation for a Pro Kids fundraiser, or…
Driver: $70
Fairway: $250
Irons: $1,100
Wedges: $100
Putter: $350″
To check out the full listing in our BST forum, head through the link: Full set of ‘Tiger Slam’ clubs
This is the most impressive current listing from the GolfWRX BST, and if you are curious about the rules to participate in the BST Forum you can check them out here: GolfWRX BST Rules
- LIKE13
- LEGIT2
- WOW1
- LOL0
- IDHT0
- FLOP1
- OB0
- SHANK5
-
19th Hole2 weeks ago
LET pro gives detailed financial breakdown of first week on tour…and the net result may shock you
-
19th Hole6 days ago
Report: LIV star turns down PGA Championship invite due to ‘personal commitments’
-
19th Hole2 weeks ago
Gary Player claims this is what ‘completely ruined’ Tiger Woods’ career
-
Equipment6 days ago
Details on Justin Thomas’ driver switch at the Wells Fargo Championship
-
Whats in the Bag2 weeks ago
Team McIlowry (Rory McIlroy, Shane Lowry) winning WITBs: 2024 Zurich Classic
-
Whats in the Bag6 days ago
Keegan Bradley WITB 2024 (May)
-
Equipment2 weeks ago
Golf fans left surprised by LIV’s choice of course for its 2024 individual championship event
-
Equipment2 weeks ago
Why Wesley Bryan is playing two 4-irons this week
Tour Pro
Jun 9, 2016 at 6:26 am
No OEM will ever release a single length set. At best it will be a “custom option” if its ever offered.
Matt Vernot
Apr 18, 2016 at 10:37 am
These are really interesting. In comparing these side by side with his Edel set, there is no external weight on these. Cobra’s R&D department must have done an exceptional job to get the weight into the head (probably the toe side) and making them look “normal”
Bruce Gerhold
Apr 16, 2016 at 11:35 am
Reply to “lost in the convo”. I fabricated and play a set of “2 length” irons: 2 length because of difficulty with large weight adjustments required when using off the shelf iron heads. My 3,4,5,6 irons are 37 inches long and my 7,8,9,PW are 36 inches long. Love the simplicity – one swing and 2 different ball positions covers all irons; play much better.
1. single length irons, and 2 length irons require lie adjustment assigning a lie to each club length. Note minimal lie adjustment (small changes) when using 2 lengths.
2. The notion of loosing length with lon g irons is a myth propagated by those taking our $ for old style irons. I hit my 3 iron 195 and my PW 105 which is very similar to old style irons.
The science (new term for golf clubs) is : at club-ball impact, MOMENTUM is conserved. Momentum – ( head mass) x (head velocity). Now, my 3 iron is 2 inches shorter than standard (about 5%) which costs 5% head velocity. BUT the club head is 21 g heavier which is 8.6% higher than old style heads. Thus, the momentum transfer to the ball – think ball velocity – actually increases with same length or 2 length irons. YOU DO NOT SACRIFICE DISTANCE OR SUFFER FROM SMALL DISTANCE INCREMENTS BETWEEN IRONS.
As a bonus, the shorter clubs help you make solid strikes for added consistency and length.
jeff
Apr 17, 2016 at 10:22 pm
momentum is MV^2
Hawk
Apr 19, 2016 at 8:54 am
All the research I’ve ever done on this has always showed one thing in regards to length of club in irons. Since most irons use a .5″ increment that translates into less than 2 yard distance in length between clubs. So really if all the clubs were the same exact loft and one the length was different you would increase or decrease distance by 2 yards for every .5″ difference in length. Loft however; has a much higher difference in distance, which is why same length clubs with proper loft gaps works!
As always though all the clubs have to be the same exact weight, head weight, shaft, grip, swing weight, and so forth for the same length shaft to actually work properly. This is also the reason why you can’t make a set unless you buy custom heads and shafts.
Chuck D
Apr 15, 2016 at 3:14 am
I recently saw Ping Scottsdale’s selling for $299 in Torrance California at a shop called Golf Exchange.
:-p
Apr 15, 2016 at 3:08 am
I would like to touch those irons, just once :-ppppp
Eye4golf
Apr 13, 2016 at 11:28 pm
Does anyone know where I can find selling prices for a old Scottsdale PO box ping putter , I own one and want to see what it’s worth? Kushin model.
Matty
Apr 13, 2016 at 12:16 pm
I have a question about single-length irons. Does the offset have to be constant throughout, or should there be small changes in offset?
Scott
Apr 13, 2016 at 3:16 pm
Tom Wishon’s site has some good information on that. Tom has a set designed to be single length.
nathan
Apr 13, 2016 at 5:04 pm
All the clubs should have the same offset. Not sure why Tom’s set varies the offset from club to club.
Teaj
Apr 13, 2016 at 6:40 pm
+1 as I believe offset is to help with the squaring of the club of a longer moment.
WillThaPill
Apr 14, 2016 at 5:55 pm
+1
setter02
May 3, 2016 at 8:25 pm
Don’t tell Butch he can’t teach because he can’t play as well as his students…
Lost in the convo
Apr 13, 2016 at 10:38 am
is the fact that the lie angle in his dingle length set is due his particular swing. For anyone else that is thinking of trying single length irons the lie angle doesn’t have to be so upright. I would think the biggest issue for anyone wanting to attempt single length irons would be the club head weights all the same and handling the yardage gaps. I think a lot of guys are sticking w/ tradition here and not even willing to try a set of single length clubs. Would be interested in trying if a company stepped up and did like the new Ben Hogan Golf irons and allowed a 30 day trial of a few clubs. Just my 2 cents.
Joshuaplaysgolf
Apr 13, 2016 at 12:11 pm
‘Dingle length’ lol. I’m not sure if your asking actual questions, since your post of void of actual punctuation…but if you are actually asking, yes, weighting and distance falling is the challenge here. My buddy is going through the process of getting single length irons dialed in right now. The lie angle is unique to Dechambeau’s stance/swing. It’s VERY upright and he takes most of the angle out of his wrists at address, so his arms and the shaft are almost parallel. If your going the single length route, you’ll just have to have the lie angle measured for your swing, most likely not 13* upright.
SirBigSpur
Apr 13, 2016 at 12:31 pm
“your post of void of actual punctuation.”
Dude. You’re that guy aren’t you?
Joshuaplaysgolf
Apr 13, 2016 at 5:25 pm
Lol. Not intentionally, it just makes it really difficult to discern if it’s a rhetorical question or for real asking. But sure, I’ll be ‘that guy’ in this instance.
Smoking gun
Apr 13, 2016 at 10:09 am
Like the song say’s, ” money money money mon’ey, money”!!!
M
Apr 13, 2016 at 8:50 am
Yikes, not sure I could look down at a neck that is that rounded, Cobra may have to work on that a little, maybe get Miura to forge them with spin welded hosels and stamp cobra on them
Chuck D
Apr 13, 2016 at 6:31 am
Wait a minute, they’ve been forcing this Einstein golfer dude and his crude scientific looking equipment down our throats for the past year and he jumps ship, to now hit traditional “looking” I know, I know already, they’re still one length, settle down, golf gear?! Sheesh, what’s next, he’s
gonna switch to a baseball cap, or stop the presses, a visor? Or maybe white pants? Well Edel, he couldn’t win the Mahztaz with your gear, so now the musical clubs begin. You….uhhh….GO DECHAMBEAU, or however he spells his name.
MLECUNI
Apr 13, 2016 at 3:23 am
I still don’t know why edel made him a new set recently. Sad for them to put hard work and have to let him go.
jordy
Apr 12, 2016 at 11:22 pm
Those are some upright looking lie angles!
cody
Apr 12, 2016 at 6:58 pm
interesting that it is blade low lofts and cavity high lofts. kinda backwards isnt it?
Greg Moore
Apr 12, 2016 at 7:40 pm
There is a full set of muscle back irons and a full set of cavity back irons. Not sure if he will put either one in play this week
Richard
Apr 13, 2016 at 12:05 am
Money talks, he will play a Cobra Iron before long even if it is not one of these two….and you can bet Cobra is biting at the bit to get it set so they can make a version for the public…I would think if your playing a one length set of irons you will have to be fit for lie angle for sure…
cody
Apr 13, 2016 at 11:21 am
thanks, it seemed so strange to me.
Teaj
Apr 13, 2016 at 6:47 pm
could be two sets. it could also be that the CB with the added weight to the lower lofted irons spins to much due to the added weight to the head to bring the swing weight up because of the shorter shaft length.