Equipment
Photos of Cobra prototype irons made for Bryson DeChambeau
News came on Tuesday that amateur standout Bryson DeChambeau entered the 2016 RBC Heritage as a professional, and signed deals with Cobra-Puma (apparel/equipment) and Bridgestone (golf ball).
Although Cobra-Puma reported DeChambeau will play the RBC Heritage with his familiar Edel prototype irons, we spotted single-length Cobra King CB and MB prototype irons made for him, while live at the event.
We do not know if and when these irons will go into play, or if these are the same irons he reportedly played at the 2016 Georgia Cup. But check out more photos of the prototype Cobra irons below.
See what GolfWRX members are saying about the irons here.
See what GolfWRX members are saying about the irons here.
- LIKE194
- LEGIT32
- WOW26
- LOL6
- IDHT4
- FLOP8
- OB6
- SHANK50
Equipment
Why Rory McIlroy will likely use the new TaylorMade BRNR Mini Driver Copper at the RBC Heritage
Although we spotted Rory McIlroy testing the new TaylorMade BRNR Mini Driver Copper last week during practice rounds at the Masters, he ultimately didn’t decide to use the club in competition.
It seems that will change this week at the 2024 RBC Heritage, played at the short-and-tight Harbour Town Golf Links in Hilton Head.
When asked on Wednesday following his morning Pro-Am if he’d be using the new, nostalgic BRNR Copper this week, McIlroy said, “I think so.”
“I like it,” McIlroy told GolfWRX.com on Tuesday regarding the BRNR. “This would be a good week for it.”
View this post on Instagram
According to Adrian Rietveld, the Senior Manager of Tour at TaylorMade, the BRNR Mini Driver can help McIlroy position himself properly off the tee at the tight layout.
Here’s what Rietveld told GolfWRX.com on Wednesday:
“For someone like Rory, who’s that long at the top end of the bag, and then you put him on a course like Harbour Town, it’s tough off the tee. It’s tight into the greens, and you have to put yourself in position off the tee to have a shot into the green. It kind of reminds me of Valderrama in Spain, where you can be in the fairway and have no shot into the green.
“I’m caddying for Tommy [Fleetwood] this week, so I was walking the course last night and looking at a few things. There’s just such a small margin for error. You can be standing in the fairway at 300 yards and have a shot, but at 320 you don’t. So if you don’t hit a perfect shot, you could be stuck behind a tree. And then if you’re back at 280, it might be a really tough shot into the small greens.
“So for Rory [with the BRNR], it’s a nice course-specific golf club for him. He’s got both shots with it; he can move it right-to-left or left-to-right. And the main thing about this club has been the accuracy and the dispersion with it. I mean, it’s been amazing for Tommy.
“This was the first event Tommy used a BRNR last year, and I remember talking to him about it, and he said he couldn’t wait to play it at Augusta next year. And he just never took it out of the bag because he’s so comfortable with it, and hitting it off the deck.
“So you look at Rory, and you want to have the tools working to your advantage out here, and the driver could hand-cuff him a bit with all of the shots you’d have to manufacture.”
So, although McIlroy might not be making a permanent switch into the new TaylorMade BRNR Mini Driver Copper, he’s likely to switch into it this week.
His version is lofted at 13.5 degrees, and equipped with a Fujikura Ventus Black 7X shaft.
See more photos of Rory testing the BRNR Mini here
- LIKE12
- LEGIT0
- WOW0
- LOL1
- IDHT0
- FLOP0
- OB0
- SHANK1
Equipment
Spotted: TaylorMade P-UDI driving iron
It seems like the RBC Heritage is full of new gear to be spotted, and you can add TaylorMade’s P-UDI utility irons to that list.
We spotted a 17-degree P-UDI 2-iron in Nick Dunlap’s bag yesterday, and now have some photos of both the 3- and 4-irons. Nick has his P-UDI 2-iron setup with a Project X HZRDUS Black 4th Gen 105g TX shaft.
From what we can tell, this new P-UDI utility iron looks to have some of the usual TaylorMade technology as we can see the Speed Slot on the sole of the club for additional face flexibility. A toe screw is usually used to close off the hollow body design that will probably be filled with a version of TaylorMade’s Speed Foam that is present in the current iron lineup. This hollow body, foam-filled design should offer additional ball speed, soft feel, and sound, as well as an optimized CG for ball flight.
“Forged” is etched into the hosel, so we can assume that either the face, body, or both are forged for a soft and responsive feel. The club looks good from behind and at address, where we can see just a little offset and a topline that I would consider medium thickness. We don’t have the full details on what is under the hood or how many loft options will be available yet.
TaylorMade P-UDI 3-iron – 20°
TaylorMade P-UDI 4-iron – 22°
- Check out the rest of our photos from the 2024 RBC Heritage
- LIKE11
- LEGIT1
- WOW2
- LOL0
- IDHT0
- FLOP0
- OB0
- SHANK1
Whats in the Bag
Collin Morikawa WITB 2024 (April)
- Collin Morikawa what’s in the bag accurate as of the RBC Heritage. More photos from the event here.
Driver: TaylorMade Qi10 LS (9 degrees)
Shaft: Mitsubishi Diamana D+ Limited 60 TX (45 inches)
3-wood: TaylorMade Qi10 (13.5 degrees)
Shaft: Mitsubishi Diamana D+ Limited 80 TX
5-wood: TaylorMade Qi10 (18 degrees)
Shaft: Mitsubishi Diamana D+ Limited 80 TX
Irons: TaylorMade P770 (4), P7MC (5-6), P730 (7-PW)
Shafts: True Temper Dynamic Gold Tour Issue Mid 115 X100 (4-6), True Temper Dynamic Gold Tour Issue X100 (7-PW)
Wedges: TaylorMade MG4 (50-SB09, 56-LB08), TaylorMade MG4 TW (60-TW11)
Shafts: True Temper Dynamic Gold Tour Issue S400
Putter: TaylorMade TP Soto
Grip: SuperStroke Zenergy Tour 2.0
Grips: Golf Pride Z-Grip Cord
Ball: TaylorMade TP5x
- LIKE3
- LEGIT0
- WOW1
- LOL0
- IDHT0
- FLOP0
- OB0
- SHANK1
-
19th Hole1 week ago
Dave Portnoy places monstrous outright bet for the 2024 Masters
-
19th Hole2 weeks ago
Things got heated at the Houston Open between Tony Finau and Alejandro Tosti. Here’s why
-
19th Hole1 week ago
Tiger Woods arrives at 2024 Masters equipped with a putter that may surprise you
-
19th Hole2 weeks ago
Report: Tiger Woods has ‘eliminated sex’ in preparation for the 2024 Masters
-
19th Hole3 days ago
Two star names reportedly blanked Jon Rahm all week at the Masters
-
19th Hole3 days ago
Neal Shipley presser ends in awkward fashion after reporter claims Tiger handed him note on 8th fairway
-
19th Hole2 weeks ago
Addiction, spinal fusion, and scam artists – Everything Anthony Kim revealed in candid interview with David Feherty
-
19th Hole2 weeks ago
Anthony Kim says doctors told him that he ‘may not have much time left’ ahead of LIV return
Tour Pro
Jun 9, 2016 at 6:26 am
No OEM will ever release a single length set. At best it will be a “custom option” if its ever offered.
Matt Vernot
Apr 18, 2016 at 10:37 am
These are really interesting. In comparing these side by side with his Edel set, there is no external weight on these. Cobra’s R&D department must have done an exceptional job to get the weight into the head (probably the toe side) and making them look “normal”
Bruce Gerhold
Apr 16, 2016 at 11:35 am
Reply to “lost in the convo”. I fabricated and play a set of “2 length” irons: 2 length because of difficulty with large weight adjustments required when using off the shelf iron heads. My 3,4,5,6 irons are 37 inches long and my 7,8,9,PW are 36 inches long. Love the simplicity – one swing and 2 different ball positions covers all irons; play much better.
1. single length irons, and 2 length irons require lie adjustment assigning a lie to each club length. Note minimal lie adjustment (small changes) when using 2 lengths.
2. The notion of loosing length with lon g irons is a myth propagated by those taking our $ for old style irons. I hit my 3 iron 195 and my PW 105 which is very similar to old style irons.
The science (new term for golf clubs) is : at club-ball impact, MOMENTUM is conserved. Momentum – ( head mass) x (head velocity). Now, my 3 iron is 2 inches shorter than standard (about 5%) which costs 5% head velocity. BUT the club head is 21 g heavier which is 8.6% higher than old style heads. Thus, the momentum transfer to the ball – think ball velocity – actually increases with same length or 2 length irons. YOU DO NOT SACRIFICE DISTANCE OR SUFFER FROM SMALL DISTANCE INCREMENTS BETWEEN IRONS.
As a bonus, the shorter clubs help you make solid strikes for added consistency and length.
jeff
Apr 17, 2016 at 10:22 pm
momentum is MV^2
Hawk
Apr 19, 2016 at 8:54 am
All the research I’ve ever done on this has always showed one thing in regards to length of club in irons. Since most irons use a .5″ increment that translates into less than 2 yard distance in length between clubs. So really if all the clubs were the same exact loft and one the length was different you would increase or decrease distance by 2 yards for every .5″ difference in length. Loft however; has a much higher difference in distance, which is why same length clubs with proper loft gaps works!
As always though all the clubs have to be the same exact weight, head weight, shaft, grip, swing weight, and so forth for the same length shaft to actually work properly. This is also the reason why you can’t make a set unless you buy custom heads and shafts.
Chuck D
Apr 15, 2016 at 3:14 am
I recently saw Ping Scottsdale’s selling for $299 in Torrance California at a shop called Golf Exchange.
:-p
Apr 15, 2016 at 3:08 am
I would like to touch those irons, just once :-ppppp
Eye4golf
Apr 13, 2016 at 11:28 pm
Does anyone know where I can find selling prices for a old Scottsdale PO box ping putter , I own one and want to see what it’s worth? Kushin model.
Matty
Apr 13, 2016 at 12:16 pm
I have a question about single-length irons. Does the offset have to be constant throughout, or should there be small changes in offset?
Scott
Apr 13, 2016 at 3:16 pm
Tom Wishon’s site has some good information on that. Tom has a set designed to be single length.
nathan
Apr 13, 2016 at 5:04 pm
All the clubs should have the same offset. Not sure why Tom’s set varies the offset from club to club.
Teaj
Apr 13, 2016 at 6:40 pm
+1 as I believe offset is to help with the squaring of the club of a longer moment.
WillThaPill
Apr 14, 2016 at 5:55 pm
+1
setter02
May 3, 2016 at 8:25 pm
Don’t tell Butch he can’t teach because he can’t play as well as his students…
Lost in the convo
Apr 13, 2016 at 10:38 am
is the fact that the lie angle in his dingle length set is due his particular swing. For anyone else that is thinking of trying single length irons the lie angle doesn’t have to be so upright. I would think the biggest issue for anyone wanting to attempt single length irons would be the club head weights all the same and handling the yardage gaps. I think a lot of guys are sticking w/ tradition here and not even willing to try a set of single length clubs. Would be interested in trying if a company stepped up and did like the new Ben Hogan Golf irons and allowed a 30 day trial of a few clubs. Just my 2 cents.
Joshuaplaysgolf
Apr 13, 2016 at 12:11 pm
‘Dingle length’ lol. I’m not sure if your asking actual questions, since your post of void of actual punctuation…but if you are actually asking, yes, weighting and distance falling is the challenge here. My buddy is going through the process of getting single length irons dialed in right now. The lie angle is unique to Dechambeau’s stance/swing. It’s VERY upright and he takes most of the angle out of his wrists at address, so his arms and the shaft are almost parallel. If your going the single length route, you’ll just have to have the lie angle measured for your swing, most likely not 13* upright.
SirBigSpur
Apr 13, 2016 at 12:31 pm
“your post of void of actual punctuation.”
Dude. You’re that guy aren’t you?
Joshuaplaysgolf
Apr 13, 2016 at 5:25 pm
Lol. Not intentionally, it just makes it really difficult to discern if it’s a rhetorical question or for real asking. But sure, I’ll be ‘that guy’ in this instance.
Smoking gun
Apr 13, 2016 at 10:09 am
Like the song say’s, ” money money money mon’ey, money”!!!
M
Apr 13, 2016 at 8:50 am
Yikes, not sure I could look down at a neck that is that rounded, Cobra may have to work on that a little, maybe get Miura to forge them with spin welded hosels and stamp cobra on them
Chuck D
Apr 13, 2016 at 6:31 am
Wait a minute, they’ve been forcing this Einstein golfer dude and his crude scientific looking equipment down our throats for the past year and he jumps ship, to now hit traditional “looking” I know, I know already, they’re still one length, settle down, golf gear?! Sheesh, what’s next, he’s
gonna switch to a baseball cap, or stop the presses, a visor? Or maybe white pants? Well Edel, he couldn’t win the Mahztaz with your gear, so now the musical clubs begin. You….uhhh….GO DECHAMBEAU, or however he spells his name.
MLECUNI
Apr 13, 2016 at 3:23 am
I still don’t know why edel made him a new set recently. Sad for them to put hard work and have to let him go.
jordy
Apr 12, 2016 at 11:22 pm
Those are some upright looking lie angles!
cody
Apr 12, 2016 at 6:58 pm
interesting that it is blade low lofts and cavity high lofts. kinda backwards isnt it?
Greg Moore
Apr 12, 2016 at 7:40 pm
There is a full set of muscle back irons and a full set of cavity back irons. Not sure if he will put either one in play this week
Richard
Apr 13, 2016 at 12:05 am
Money talks, he will play a Cobra Iron before long even if it is not one of these two….and you can bet Cobra is biting at the bit to get it set so they can make a version for the public…I would think if your playing a one length set of irons you will have to be fit for lie angle for sure…
cody
Apr 13, 2016 at 11:21 am
thanks, it seemed so strange to me.
Teaj
Apr 13, 2016 at 6:47 pm
could be two sets. it could also be that the CB with the added weight to the lower lofted irons spins to much due to the added weight to the head to bring the swing weight up because of the shorter shaft length.