Equipment
Vokey adds SM5 raw wedges to WedgeWorks
Titleist has expanded its Vokey SM5 wedge line with the addition of a new raw finish, which is a favorite of many PGA Tour players.
[quote_box_center]“Raw means there is no additional finish applied to the wedge, which is made of 8620 carbon steel,” said Bob Vokey, the company’s master wedge craftsman. “It has what I like to call a satin appearance that will start to rust after some use.”[/quote_box_center]
The raw-finished wedges were only available through the Titleist Tour Van or the Vokey Tour Department in the past, but they’re now available to the masses for purchase through the company’s WedgeWorks program on Vokey.com for $180 and up, depending on custom options.
Raw wedge heads are used on the PGA Tour to give club makers the ability to customize the sole, shape and weight of the club to a specific player’s needs, but they’re also preferred by players because of their look and feel. Because there is no finish on the clubs, they will rust over time, creating a unique, glare-free look.
[quote_box_center]”Some players like it even more as it rusts, kind of like a trusty hammer or another tool,” Vokey said.[/quote_box_center]
The raw SM5 wedges are offered in four lofts (54, 56, 58 and 60) and three of Vokey’s most popular sole grinds (S, M and K) creating 10 different configurations. Through WedgeWorks, golfers can also customize the wedges with personal stampings and up to six characters, as well as one of 12 paintfill options. A selection of custom grips, shafts, shaft bands and ferrules are also available.
Like Vokey’s retail SM5 wedges, which are offered in three finishes (Tour Chrome, Gold Nickel and Raw Black), the SM5 raw wedges have the company’s Spin Milled TX3 grooves.
- LIKE151
- LEGIT16
- WOW3
- LOL8
- IDHT4
- FLOP8
- OB2
- SHANK23
Whats in the Bag
Alex Fitzpatrick WITB 2024 (April)
- Alex Fitzpatrick what’s in the bag accurate as of the Zurich Classic.
Driver: Ping G430 LST (10.5 degrees)
Shaft: Fujikura Ventus Black 6 X
3-wood: TaylorMade Qi10 (15 degrees)
Shaft: Fujikura Ventus TR Black 7 X
Hybrid: Ping G430 (19 degrees)
Shaft: Fujikura Ventus Black HB 10 TX
Irons: Ping iCrossover (2), Titleist T100 (4-PW)
Shafts: Fujikura Ventus Black HB 9 TX (2), Nippon N.S. Pro Modus 3 Tour 120 X (4-9)
Wedges: Titleist Vokey Design SM10 (50-12F, 56-12D, 60-08M)
Shafts: Nippon N.S. Pro Modus 3 Tour 120 X
Putter: Bettinardi SS16 Dass
Grips: Golf Pride MCC
Check out more in-hand photos of Alex Fitzpatrick’s clubs here.
- LIKE0
- LEGIT0
- WOW0
- LOL0
- IDHT0
- FLOP0
- OB0
- SHANK0
Equipment
What’s the perfect mini-driver/shaft combo? – GolfWRXers discuss
In our forums, our members have been discussing Mini-Drivers and accompanying shafts. WRXer ‘JamesFisher1990’ is about to purchase a BRNR Mini and is torn on what shaft weight to use, and our members have been sharing their thoughts and set ups in our forum.
Here are a few posts from the thread, but make sure to check out the entire discussion and have your say at the link below.
- PARETO: “New BRNR at 13.5. Took it over to TXG (Club Champ but TXG will always rule) in Calgary for a fit. Took the head down to 12, stuck in a Graphite Design AD at 3 wood length and 60g. Presto- numbers that rivaled my G430Max but with waaaaay tighter dispersion. Win.”
- driveandputtmachine: “Still playing a MIni 300. The head was only 208, so I ordered a heavier weight and play it at 3 wood length. I am playing a Ventus Red 70. I play 70 grams in my fairways. I use it mainly to hit draws off the tee. When I combine me, a driver, and trying to hit a draw it does not work out well most of the time. So the MIni is for that. As an aside, I have not hit the newest BRNR, but the previous model wasn’t great off the deck. The 300 Mini is very good off the deck.”
- JAM01: “Ok, just put the BRNR in the bag along side a QI10 max and a QI10 3 wood. A load of top end redundancy. But, I have several holes at my two home courses where the flight and accuracy of the mini driver helps immensely. Mine is stock Proforce 65 at 13.5, I could see a heavier shaft, but to normal flex, as a nice alternative.”
Entire Thread: “What’s the perfect Mini-Driver/Shaft combo? – GolfWRXers discuss”
- LIKE1
- LEGIT0
- WOW0
- LOL0
- IDHT0
- FLOP0
- OB0
- SHANK0
Equipment
Coolest thing for sale in the GolfWRX Classifieds (4/26/24): Artisan 0521 custom putter
At GolfWRX, we are a community of like-minded individuals that all experience and express our enjoyment of the game in many ways.
It’s that sense of community that drives day-to-day interactions in the forums on topics that range from best driver to what marker you use to mark your ball. It even allows us to share another thing we all love – buying and selling equipment.
Currently, in our GolfWRX buy/sell/trade (BST) forum, there is a listing for an Artisan 0521 custom putter
From the seller: (@Nobody2): “$775 -Artisan 0521 custom putter PVD (black finish) with sweep neck hosel. There are no personal stampings other than my player # in very small print on the side of the hosel (all Artisan products have this along with the date it was made). This putter looks absolutely amazing and has only been used for 3 rounds. It has a black steel shaft and has a very Cam Smith look to it. The putter looks new and has no wear marks anywhere on the putter. It comes with extra weights (one set of of 5 gram weights and one set of 15 gram weights). The head cover is a a navy blue ‘quilted blade putter cover.’ If you are wondering why I am selling…I flat out have the yips and the only thing saving me is a broomstick. New, this putter is $1085, so if the specs work for you (grip, length and lie can certainly be tweaked) it will save you some good money and 2 month wait time.
Specs:
To check out the full listing in our BST forum, head through the link: Artisan 0521 custom putter
This is the most impressive current listing from the GolfWRX BST, and if you are curious about the rules to participate in the BST Forum you can check them out here: GolfWRX BST Rules
- LIKE1
- LEGIT0
- WOW0
- LOL0
- IDHT0
- FLOP0
- OB0
- SHANK0
-
19th Hole2 weeks ago
Dave Portnoy places monstrous outright bet for the 2024 Masters
-
19th Hole4 days ago
Justin Thomas on the equipment choice of Scottie Scheffler that he thinks is ‘weird’
-
19th Hole2 weeks ago
Tiger Woods arrives at 2024 Masters equipped with a putter that may surprise you
-
19th Hole4 days ago
‘Absolutely crazy’ – Major champ lays into Patrick Cantlay over his decision on final hole of RBC Heritage
-
19th Hole2 weeks ago
Two star names reportedly blanked Jon Rahm all week at the Masters
-
19th Hole1 week ago
Report: LIV Golf identifies latest star name they hope to sign to breakaway tour
-
19th Hole2 weeks ago
Neal Shipley presser ends in awkward fashion after reporter claims Tiger handed him note on 8th fairway
-
19th Hole1 week ago
Brandel Chamblee has ‘no doubt’ who started the McIlroy/LIV rumor and why
LukasM
Jul 15, 2015 at 6:34 am
Hi admin, i see your page needs fresh content. Daily updates will rank your blog in google higher, content is king nowadays. If you are to lazy to write unique articles everyday you should search in google for:
Ightsero’s Essential Tool
Insurance
Jul 10, 2015 at 6:53 pm
Just. No. The price point for this club is way off the mark. High-volume cast-stamped steel with an upcharge finish? The std wedges are already way overpriced for what they are and now this? Come on Titleist. Gives us tour-grade forged wedges and charge $180, we might just take it.
I will say it looks cool. So they got that part right.
Clemson Sucks
Jul 10, 2015 at 9:37 am
They’ve actually started offering many different bounce/grind combinations in the SM5’s. And they’re wedges.. What do expect?
John Daly
Jul 10, 2015 at 12:41 am
No thanks on $180 wedge that is a rusting pos.
Rwj
Jul 8, 2015 at 8:50 pm
Wedge that is $180 a piece. Cast 8620 steel that size is very cheap, the labor price is high, but hand grinding a wedge is not a two hour process, so not significant. The price comes from the titleist name and brand. The company has a large number of senior vp, then vp’s, then directors, then managers, etc. the overhead is outrageous
Matto
Jul 9, 2015 at 6:18 pm
Doesn’t explain the fact that all (now) 4 Sm5’s are made from the same steel. 3 get get a final process, Chrome, Nickel, Black.
The last of the 4 gets no final process yet somehow costs $50 more.
It’s a rort, pure & simple.
This is a wedge that people can have and now think, “yeah, I got one like Adam Scott & Spetih.” (Looks great though!!!!)
Matto
Jul 8, 2015 at 7:42 pm
Or you could buy mine, all listed online at the moment. 46,50,54,58.
Ping Glides for me now. ????????
Brian T
Jul 8, 2015 at 6:14 pm
Pay an extra $50 for them to not apply an extra manufacturing step? Am I missing something? If anything they should cost less.
Rich
Jul 9, 2015 at 7:31 am
+1
jgpl001
Jul 8, 2015 at 5:11 pm
DAMN I just bought 2 Gold Nickel Vokeys last week because I got tired waiting for a raw version…
How could Titleist not offer the raw version retail from day one???
Clemson Sucks
Jul 8, 2015 at 3:10 pm
Or, you could save $50 by buying the wedge in raw black, then strip the finish off…
Chuck
Jul 9, 2015 at 2:08 pm
Have you actually done that? I recall the process for easily stripping the “Oil Can” finish off Vokeys some years ago, with household products.
But isn’t the black some sort of anodizing? How do you get that off, if it is electroplated on? Of course one way to get it off would be to hit 5,000 bunker shots with it. And the side benefit is that you’d be the best bunker player in your Saturday morning foursome.
But seriously, how do you strip the black finish off?
Clemson Sucks
Jul 10, 2015 at 9:33 am
http://www.golfwrx.com/forums/topic/1042473-vokey-sm5-removing-black-finish-down-to-raw-a-how-to-pic-heavy/
Chuck
Jul 10, 2015 at 12:22 pm
How did I ever miss that thread? It’s brilliant; thanks for posting the link.
Steve
Jul 8, 2015 at 2:05 pm
Never liked vokeys, just always felt harsh.
Rusty
Jul 9, 2015 at 11:45 am
Try hitting the ball in the sweetspot. Then they feel like butter 😉
Andrew
Jul 8, 2015 at 1:30 pm
Why no 46/48 or 50??
John Aiello
Jul 8, 2015 at 12:55 pm
You didn’t say when the were going to become available.
Clemson Sucks
Jul 8, 2015 at 2:57 pm
Says they are coming soon, on the website.
Terry Shell PGA
Jul 8, 2015 at 12:53 pm
Finally raw wedges without hand ground price. Now we need the “j” and “e” grinds.
me
Jul 8, 2015 at 12:52 pm
So the standard SM5 are $130, but the “process” of NOT adding a finish to the club adds an additional $50 to the price tag?
Matt
Jul 8, 2015 at 3:20 pm
Supply and demand, baby. Supply and demand.
Rwj
Jul 8, 2015 at 8:47 pm
Doubt fits into supply demand concept. I imagine there are plenty who want finished wedges as much as raw, so demand is probably the same. Supply, the raw wedges are every wedge, finish is added to the raw state, so supply is constant
BustyMagoo
Jul 8, 2015 at 10:37 pm
Yah so we’re paying more for less. It does suck but that is indeed supply and demand. Either way, I’m over paying high prices for clubs.
Chuck
Jul 9, 2015 at 2:12 pm
It’s a fair point! Why pay more, for less?
I haven’t bought a Wedgeworks wedge yet; are there things offered with Wedgeworks clubs that can’t be had with other Vokeys? Shafts? Grinds? Stamping?
Chuck
Jul 8, 2015 at 12:48 pm
Looks like Vokey is reading GolfWRX.com, and I propose to reward Vokey with the purchase of a raw SM5!
Next up; new Vokey remakes of the 400 series wedges. Let’s do this!
Jon443
Jul 8, 2015 at 7:52 pm
The new sm6 look very similar to the 400 series. You will love them if your a 400 lover.