Equipment
Tour Treatment: Did you know you can order a custom Vokey?
By Richard A
GolfWRX Staff 7/2012
First off… for those that didn’t know- YOU CAN CUSTOM ORDER A VOKEY WEDGE!!! Here is a link to the Vokey Wedgeworks micro site where you can customize you own. Now this isn’t an advertisement. However this is an article to make golfers aware that we can get the same treatment that only tour pros could historically receive.
In the summer of 2010, Vokey.com launched WedgeWorks, which allowed the masses to purchase Vokey Tour Van Design (TVD) wedges directly from the source in Mr. Vokey’s facility in Carlsbad, Ca. Special grinds, exclusive finishes, limited releases Tour-issue heads and unique engraving became available to all golfers. WedgeWorks is unlike the Scotty Cameron custom shop, in that it is not just a place to send a club for reconditioning or customization, although those services are available too. Through WedgeWorks, Vokey.com is able to release many prototype and special edition wedges to the public, as well as exclusive models that cannot be purchased at most stores.
Click here to see more photo and read the discussion in the forums
Now here is the wedge I just received. This wedge is sick. TVD52 w/ Black Oxide, easyyy (my GolfWRX screen name) stamping, snow no fill. Also Vokey did a special touch for me and added “GolfWRX” on the shaft.
Better than that the finish started to wear like I wanted it to on the face and looks better used. I will add some pics next week. We did an article about the Vokey Wedgeworks were you can get this done for yourself. Click here to see the article. But we don’t hear that much about it on WRX.
I am surprised how many of my friends that are gear heads don’t know that Wedgeworks is available for them. I am thinking of getting a 56* now.
Click here to see more photo and read the discussion in the forums
I wish we could all design our favorite wedge and post pics here in this thread but it is to hard to do for many. I think you have to do a green dump to show the final pic of your design. Then attach the screen dump here.
Anyway I think Vokey did it right. Awesome service and this is not some info commercial. This is me being a equipment ho as I know how to do.
Click here to see an interview with Bob Vokey at the Vokey Factory
Click here to see the Vokey factory photo gallery
- LIKE4
- LEGIT1
- WOW2
- LOL2
- IDHT1
- FLOP1
- OB1
- SHANK5
Whats in the Bag
Steve Stricker WITB 2024 (April)
- Steve Stricker WITB accurate as of the Zurich Classic. More photos from the event here.
Driver: Titleist TSR3 (9 degrees, C4 SureFit setting)
Shaft: Fujikura Motore Speeder VC 7.2 X
3-wood: Titleist 915F (13.5 degrees)
Shaft: Mitsubishi Tensei CK Pro White 80 TX
Hybrid: Titleist 816 H1 (17 degrees)
Shaft: Fujikura Motore Speeder VC 9.2 X
Irons: Titleist T200 (3, 4), Titleist T100 (5-9)
Shafts: Project X 6.5
Wedges: Titleist Vokey SM8 (46-10F @55), Titleist Vokey SM10 (54-10S @53), Titleist Vokey SM4 (60 @59)
Shafts: True Temper Dynamic Gold X100 w/Sensicore
Putter: Odyssey White Hot No. 2
Ball: Titleist Pro V1x
Grips: Golf Pride Tour Velvet Grip Rite
Check out more in-hand photos of Steve Stricker’s clubs here.
- LIKE27
- LEGIT2
- WOW0
- LOL1
- IDHT1
- FLOP0
- OB0
- SHANK1
Whats in the Bag
Alex Fitzpatrick WITB 2024 (April)
- Alex Fitzpatrick what’s in the bag accurate as of the Zurich Classic.
Driver: Ping G430 LST (10.5 degrees)
Shaft: Fujikura Ventus Black 6 X
3-wood: TaylorMade Qi10 (15 degrees)
Shaft: Fujikura Ventus TR Black 7 X
Hybrid: Ping G430 (19 degrees)
Shaft: Fujikura Ventus Black HB 10 TX
Irons: Ping iCrossover (2), Titleist T100 (4-PW)
Shafts: Fujikura Ventus Black HB 9 TX (2), Nippon N.S. Pro Modus 3 Tour 120 X (4-9)
Wedges: Titleist Vokey Design SM10 (50-12F, 56-12D, 60-08M)
Shafts: Nippon N.S. Pro Modus 3 Tour 120 X
Putter: Bettinardi SS16 Dass
Grips: Golf Pride MCC
Check out more in-hand photos of Alex Fitzpatrick’s clubs here.
- LIKE12
- LEGIT0
- WOW1
- LOL1
- IDHT1
- FLOP0
- OB0
- SHANK0
Equipment
What’s the perfect mini-driver/shaft combo? – GolfWRXers discuss
In our forums, our members have been discussing Mini-Drivers and accompanying shafts. WRXer ‘JamesFisher1990’ is about to purchase a BRNR Mini and is torn on what shaft weight to use, and our members have been sharing their thoughts and set ups in our forum.
Here are a few posts from the thread, but make sure to check out the entire discussion and have your say at the link below.
- PARETO: “New BRNR at 13.5. Took it over to TXG (Club Champ but TXG will always rule) in Calgary for a fit. Took the head down to 12, stuck in a Graphite Design AD at 3 wood length and 60g. Presto- numbers that rivaled my G430Max but with waaaaay tighter dispersion. Win.”
- driveandputtmachine: “Still playing a MIni 300. The head was only 208, so I ordered a heavier weight and play it at 3 wood length. I am playing a Ventus Red 70. I play 70 grams in my fairways. I use it mainly to hit draws off the tee. When I combine me, a driver, and trying to hit a draw it does not work out well most of the time. So the MIni is for that. As an aside, I have not hit the newest BRNR, but the previous model wasn’t great off the deck. The 300 Mini is very good off the deck.”
- JAM01: “Ok, just put the BRNR in the bag along side a QI10 max and a QI10 3 wood. A load of top end redundancy. But, I have several holes at my two home courses where the flight and accuracy of the mini driver helps immensely. Mine is stock Proforce 65 at 13.5, I could see a heavier shaft, but to normal flex, as a nice alternative.”
Entire Thread: “What’s the perfect Mini-Driver/Shaft combo? – GolfWRXers discuss”
- LIKE6
- LEGIT1
- WOW0
- LOL0
- IDHT2
- FLOP1
- OB0
- SHANK7
-
19th Hole3 weeks ago
Dave Portnoy places monstrous outright bet for the 2024 Masters
-
19th Hole6 days ago
Justin Thomas on the equipment choice of Scottie Scheffler that he thinks is ‘weird’
-
19th Hole3 weeks ago
Tiger Woods arrives at 2024 Masters equipped with a putter that may surprise you
-
19th Hole6 days ago
‘Absolutely crazy’ – Major champ lays into Patrick Cantlay over his decision on final hole of RBC Heritage
-
19th Hole2 weeks ago
Two star names reportedly blanked Jon Rahm all week at the Masters
-
19th Hole2 weeks ago
Report: LIV Golf identifies latest star name they hope to sign to breakaway tour
-
19th Hole2 weeks ago
Neal Shipley presser ends in awkward fashion after reporter claims Tiger handed him note on 8th fairway
-
19th Hole2 weeks ago
Brandel Chamblee has ‘no doubt’ who started the McIlroy/LIV rumor and why
Lewistitleist88
Jan 7, 2013 at 7:21 pm
Hi all,
I am pretty new to GolfWRX but I am loving what I am seeing. I am after a little advice, I was looking to purchase new wedges but I am undecided between sm4 and TVD. As I live in the UK I am unable to try the TVD wedges before I order them from BV USA. Any advice would be much appreciated. Which wedges spin the most? And does anybody know if you can order a different bounce than stated on the form? Many thanks Lewis
Rob Price
Jan 9, 2013 at 7:44 am
i have some in the uk which will be available soon on a well known auction site, rpgolf
Sapnah
Oct 6, 2012 at 11:23 pm
Marty-Current Vokey Design wedges do not fetuare grooves that will conform with the new regulation, however, we will offer new wedges that do. Keep in mind, also, that unless you plan to qualify and/or compete in elite-level professional events (i.e., PGA Tour, U.S. Open) in 2010, your current wedges will be legal for play until 2014, and possibly until 2024 depending on the types of tournaments in which you compete.
Kalob
Sep 18, 2012 at 12:52 am
I’ve been using the TVD’s all summer and I love them they are every thing I could want in a wedge.
Christian
Jul 18, 2012 at 10:30 am
I just ordered my 60° TVD last week..Cant wait!
Great pix!
Evan
Jul 17, 2012 at 1:50 pm
Yes. I did know that.