Equipment
Patrick Reed’s irons and playing golf club detective
As golf writers with a specialty in golf club technology and an understanding of how the industry and supply chains work, it’s usually not overly difficult for us to draw some conclusions as to where particular clubs might come from. The reason being that as far as top-end quality components go, there are only so many places that have the capability to produce them—especially when it comes to creating thin cast/forged titanium woods or forged irons.
When a new club shows up, this puts us in the position of reading between the lines, closely comparing pictures, club designs, and even fonts, in an attempt to connect the dots.
One of the first examples of this in 2019 was Francesco Molinari’s custom Callaway irons—obviously different from the standard Apex MB model. Francesco even divulged some information about their Japanese roots in an interview with Golf.com’s Jonathan Wall “These [Apex MB] forged blades are made, I think, in Japan, so they’re slightly different from the standard muscle back.” I took a deep dive on these in a piece that can be found here.
OEM Oversight
Don’t think for a second it’s only equipment junkies on the outside doing research to learn more about their favorite clubs or trying to track down prototype information—OEMs and equipment manufacturers do it too; they even have teams dedicated to the task.
One of the best examples of this is a group of engineers located in Titleist HQ in Fairhaven Massachusetts. Their primary role is to monitor their supply chain, but the other key part of their role is to keep up to date on what other overseas manufacturers are doing with their balls, including the “white label” balls being sold under various brands—a hot topic that has been discussed many times over. The reason this is key for Titleist/Acushnet is they are both designers and patent holders when it comes to golf ball IP (intellectual property), and Acushnet also owns its manufacturing, something only the largest companies can afford to do.
The “Patrick Reed Signature” Irons
This brings us to Patrick Reed’s new “signature” irons, spotted earlier this week at the Hero World Challenge in the Bahamas. Patrick has been quiet on the subject beyond a few details including that he’s been working on them for over a year with a small Japanese company, and we would be hearing more at the beginning of January. First reported by PGA Tour’s Andrew Tursky, thanks to some digging on the USGA Conforming List, the irons are Manufactured by Emery JPN Co.
Here’s where the detective work kicks in: I went beyond the USGA’s list and starting searching for Emery JPN Co. online and came back mostly empty-handed until I had an idea. The USGA isn’t the only governing body to have conforming lists so I went to the R&A, and BINGO!
A quick search for Emery resulted in them being the parent company for a number of quality component OEMs including GrindWorks.jp , SAQRA , and Patrick Reed.
Just like with golf balls, phones or computers, smaller companies don’t own their manufacturing and instead rely on creating a design to then be built by a much large facility. With phones, that means Foxconn, with golf balls that means a few large companies in Taiwan and China, and for forged irons, that generally leads to Endo—one of the largest forging companies in the world—they even have they own in house brand, Epon. Considering that GrindWorks irons are known to be forged at Endo, I would be happy to draw a straight line to the Patrick Reed irons also being forged there too.
Until we have further details this is still speculation, but to see what other are saying in the GolfWRX forums check out the discussion here: GolfWRX Forums: Patrick Reed with new Irons
- LIKE184
- LEGIT31
- WOW15
- LOL6
- IDHT3
- FLOP8
- OB6
- SHANK50
Whats in the Bag
Michael Block WITB 2024 (May)
- Michael Block what’s in the bag accurate as of the PGA Championship.
Driver: TaylorMade Qi10 “Dot” (9 degrees @7.5)
Shaft: Fujikura Ventus Black 6 X
3-wood: TaylorMade Qi10 Tour (15 degrees @14.25)
Shaft: 2024 Fujikura Ventus Blue 7 X
5-wood: TaylorMade M5 (19 degrees @17)
Shaft: Mitsubishi Tensei CK Orange 70 TX
Irons: TaylorMade Stealth UDI (4), TaylorMade Proto (5-9)
Shafts: Graphite Design Tour AD DI Hybrid 85 X (4), Project X 6.5 (5-9)
Wedges: TaylorMade Milled Grind 4 (46-09SB, 60 [unconfirmed]), TaylorMade Milled Grind 2 (52-09S, 56)
Shafts: True Temper Dynamic Gold Tour Issue S400
Putter: Odyssey White Hot 2-Ball
Grips: Golf Pride MCC
See the rest of Michael Block’s WITB in the forums.
- LIKE0
- LEGIT0
- WOW0
- LOL0
- IDHT0
- FLOP0
- OB0
- SHANK1
Whats in the Bag
Brooks Koepka WITB 2024 (May)
- Brooks Koepka what’s in the bag accurate as of the PGA Championship.
Driver: TaylorMade Qi10 “Dot” (10.5 degrees @9.75)
Shaft: Mitsubishi Diamana D Limited 60 TX (44.5 inches, tipped 1 inch)
3-wood: TaylorMade M2 Tour HL (16.5 degrees)
Shaft: Mitsubishi Diamana D+ 80 TX
Irons: Nike Vapor Pro (3), Srixon ZX7 Mk II (4-9)
Shaft: Fujikura Pro Tour Spec 95 X (3), True Temper Dynamic Gold Tour Issue X100 (4-9)
Wedges: Cleveland RTX ZipCore Tour Rack Raw (46-10 Mid), RTX6 ZipCore Tour Rack (52-10 Mid, 56-10 Mid, 60-6 Low)
Shaft: True Temper Dynamic Gold Tour Issue X100 (46), True Temper Dynamic Gold Tour Issue S400 (52-60)
Putter: Scotty Cameron T-5.5
Grips: Golf Pride Tour Velvet Cord (Midsize)
Ball: Srixon Z-Star Diamond
Check out more in-hand photos of Brooks Koepka’s clubs here.
- LIKE0
- LEGIT0
- WOW0
- LOL0
- IDHT0
- FLOP0
- OB0
- SHANK0
Equipment
Coolest thing for sale in the GolfWRX Classifieds (5/13/24): Full set of ‘Tiger Slam’ clubs
At GolfWRX, we are a community of like-minded individuals that all experience and express our enjoyment of the game in many ways.
It’s that sense of community that drives day-to-day interactions in the forums on topics that range from best driver to what marker you use to mark your ball. It even allows us to share another thing we all love – buying and selling equipment.
Currently, in our GolfWRX buy/sell/trade (BST) forum, there is a listing for a full set of ‘Tiger Slam’ clubs.
From the seller: (@CaymanS): “During the year of recovery from leg surgery that never quite healed, I was bored. One thing led to another, and I ended up gradually building/acquiring the individual pieces to complete a set of “Tiger Slam” clubs. They are what Tiger played to win 4 consecutive majors, which nobody has ever done. This is not an exact replica of course, but something close that fit me to play a few times per year and experience what Tiger did. But my bad leg, 4 shoulder tears, and age prevents me from the ball-striking needed to enjoy these to their fullest. They may not be everyone’s cup of tea, especially since the driver and fairway shafts are regular flex and most players good enough to play these will need to change them, but it’s not a perfect world. I am not a historian on this stuff, but my research indicates these are the same models Tiger used, with slightly different specs to fit me.
Full set $1,600, or…
…a donation for a Pro Kids fundraiser, or…
Driver: $70
Fairway: $250
Irons: $1,100
Wedges: $100
Putter: $350″
To check out the full listing in our BST forum, head through the link: Full set of ‘Tiger Slam’ clubs
This is the most impressive current listing from the GolfWRX BST, and if you are curious about the rules to participate in the BST Forum you can check them out here: GolfWRX BST Rules
- LIKE6
- LEGIT2
- WOW1
- LOL0
- IDHT0
- FLOP1
- OB0
- SHANK2
-
19th Hole2 weeks ago
LET pro gives detailed financial breakdown of first week on tour…and the net result may shock you
-
19th Hole6 days ago
Report: LIV star turns down PGA Championship invite due to ‘personal commitments’
-
19th Hole2 weeks ago
Gary Player claims this is what ‘completely ruined’ Tiger Woods’ career
-
Equipment5 days ago
Details on Justin Thomas’ driver switch at the Wells Fargo Championship
-
Whats in the Bag2 weeks ago
Team McIlowry (Rory McIlroy, Shane Lowry) winning WITBs: 2024 Zurich Classic
-
Whats in the Bag6 days ago
Keegan Bradley WITB 2024 (May)
-
Equipment2 weeks ago
Golf fans left surprised by LIV’s choice of course for its 2024 individual championship event
-
19th Hole2 weeks ago
LIV star splits with swing coach after working together for 14 years
Pingback: TOUR REPORT: John Daly’s bizarre irons, Tiger’s surprising equipment changes – GolfWRX
john
Dec 24, 2019 at 7:36 am
Like the man himself, they should probably be a lot chunkier.
jgpl001
Dec 16, 2019 at 4:10 pm
These look a little cheap and 1970’s to me
No drooling here..
Randy Copeland
Dec 12, 2019 at 7:43 pm
Muira’s made for Nike with Far Par stamped on them for sure no doubt.
lance
Dec 10, 2019 at 2:13 pm
Shovel back > muscle back
Tyler Durden
Dec 9, 2019 at 12:48 pm
This iron is specially ground in the back to make scooping sand or other impediments easier to sweep away
Caroline
Dec 7, 2019 at 8:44 pm
all the big OEM golf companies are in the business to make money and many to satisfy stock holders…it is very simple you make the best equipment you can with the highest margin you can. And when you sit down with that pencil to figure out how to make a good margin finding someone to make your product is always a consideration…
ewfnick
Dec 7, 2019 at 4:50 am
Wondered what the fuss was about and just seen what he did, nothing worse than a cheat, if he was playing in any of the groups I play with he would have caught a smack in the gob
Elvis Pwessley
Dec 7, 2019 at 12:34 am
Awww….my whittle comment got deweated!
Pricilla Presley
Dec 7, 2019 at 12:19 am
Uh oh, can he be the new douche Kooch replacement? I never liked his rolled shoulders and that smug look on his mug or that silly skip step as he pulls his ball out of the cup. Just an all around douche!
Dyson Bochambeau
Dec 6, 2019 at 8:51 pm
I hear his clubs give you improved lies
Brandon
Dec 6, 2019 at 7:36 pm
Fake news. Patrick Reed forged these himself using nothing but the finest American carbon steel and good old fashioned determination. He just had to move a little sand first in his backyard foundry so he could swing his sledge hammer better.
Clint
Dec 6, 2019 at 4:43 pm
These look like they have just enough sole to push some sand away from your ball in the bunker.
Rory
Dec 6, 2019 at 7:08 pm
No such thing as bad publicity, but I’m betting that’s not the first close up they wanted…..
Hdtvman
Dec 6, 2019 at 2:49 pm
Nice work, Lt. Columbia. What I like about Reed, like Tiger, he’s there to win, not chasing the money from major manufacturer’s. I’m sure he could name his price with any of them, but he plays what he likes and what works best for him.
jr
Dec 26, 2019 at 5:50 pm
Or maybe no sponsor wants him.
Hoganben
Dec 6, 2019 at 1:59 pm
Almost all forged irons look the same so may as well have one or two companies make them and they all look the same because one or two companies make them. Ps….I could design Tiger’s new irons…his irons are always the same with just a different brand name on them!!
Geoffrey Holland
Dec 6, 2019 at 1:48 pm
The loost art of proofreading strikes again.
“the irons are Manufactured by Emory JPN Co.
Here’s where the detective work kicks in: I went beyond the USGA’s list and starting searching for Emery JPN Co.”
Paul
Dec 6, 2019 at 2:27 pm
Who cares, get a life.
Jethro
Dec 6, 2019 at 3:28 pm
Your name is misspelled. It should be Jeffrey. Lol!
Waka waka
Dec 6, 2019 at 4:26 pm
Preach!!!!
Geoffery The Girraffe
Dec 6, 2019 at 4:21 pm
ironic typo in his own comment then!
Rory
Dec 6, 2019 at 7:06 pm
I think he has looooost his mind
Tim
Dec 7, 2019 at 8:18 am
Loost..Proof..???
Gary
Dec 6, 2019 at 11:51 am
As soon as I saw them I thought Epon. The shape and finishing just looks like what I’m used to seeing from Epon.
Also if you connect the dots you’ll probably find that Endo forges the blanks that Artisan uses. That’s probably where the connection started.