Equipment
Patrick Reed’s irons and playing golf club detective
As golf writers with a specialty in golf club technology and an understanding of how the industry and supply chains work, it’s usually not overly difficult for us to draw some conclusions as to where particular clubs might come from. The reason being that as far as top-end quality components go, there are only so many places that have the capability to produce them—especially when it comes to creating thin cast/forged titanium woods or forged irons.
When a new club shows up, this puts us in the position of reading between the lines, closely comparing pictures, club designs, and even fonts, in an attempt to connect the dots.
One of the first examples of this in 2019 was Francesco Molinari’s custom Callaway irons—obviously different from the standard Apex MB model. Francesco even divulged some information about their Japanese roots in an interview with Golf.com’s Jonathan Wall “These [Apex MB] forged blades are made, I think, in Japan, so they’re slightly different from the standard muscle back.” I took a deep dive on these in a piece that can be found here.
OEM Oversight
Don’t think for a second it’s only equipment junkies on the outside doing research to learn more about their favorite clubs or trying to track down prototype information—OEMs and equipment manufacturers do it too; they even have teams dedicated to the task.
One of the best examples of this is a group of engineers located in Titleist HQ in Fairhaven Massachusetts. Their primary role is to monitor their supply chain, but the other key part of their role is to keep up to date on what other overseas manufacturers are doing with their balls, including the “white label” balls being sold under various brands—a hot topic that has been discussed many times over. The reason this is key for Titleist/Acushnet is they are both designers and patent holders when it comes to golf ball IP (intellectual property), and Acushnet also owns its manufacturing, something only the largest companies can afford to do.
The “Patrick Reed Signature” Irons
Photo By: Royce Thompson (PGA Tour)
This brings us to Patrick Reed’s new “signature” irons, spotted earlier this week at the Hero World Challenge in the Bahamas. Patrick has been quiet on the subject beyond a few details including that he’s been working on them for over a year with a small Japanese company, and we would be hearing more at the beginning of January. First reported by PGA Tour’s Andrew Tursky, thanks to some digging on the USGA Conforming List, the irons are Manufactured by Emery JPN Co.
Here’s where the detective work kicks in: I went beyond the USGA’s list and starting searching for Emery JPN Co. online and came back mostly empty-handed until I had an idea. The USGA isn’t the only governing body to have conforming lists so I went to the R&A, and BINGO!
A quick search for Emery resulted in them being the parent company for a number of quality component OEMs including GrindWorks.jp , SAQRA , and Patrick Reed.
Just like with golf balls, phones or computers, smaller companies don’t own their manufacturing and instead rely on creating a design to then be built by a much large facility. With phones, that means Foxconn, with golf balls that means a few large companies in Taiwan and China, and for forged irons, that generally leads to Endo—one of the largest forging companies in the world—they even have they own in house brand, Epon. Considering that GrindWorks irons are known to be forged at Endo, I would be happy to draw a straight line to the Patrick Reed irons also being forged there too.
Until we have further details this is still speculation, but to see what other are saying in the GolfWRX forums check out the discussion here: GolfWRX Forums: Patrick Reed with new Irons
- LIKE184
- LEGIT31
- WOW15
- LOL6
- IDHT3
- FLOP8
- OB6
- SHANK50
- Kevin Tway what’s in the bag accurate as of the Wells Fargo Championship. More photos from the event here.
Driver: Ping G430 LST (10.5 degrees)
Shaft: Fujikura Ventus Black 6 X
3-wood: TaylorMade Stealth 2 (15 degrees)
Shaft: Mitsubishi Diamana D+ 80 TX
5-wood: TaylorMade Stealth 2 (18 degrees)
Shaft: Mitsubishi Diamana D+ 90 TX
Irons: Wilson Staff Utility (2), Titleist T100 (4-9)
Shafts: Mitsubishi MMT 100 TX (2), True Temper Dynamic Gold Tour Issue X100 (4-9)
Wedges: Titleist Vokey Design SM10 (48-10F @47, 52-12F @51, 56-14F), SM7 (60-10S)
Shafts: True Temper Dynamic Gold Tour Issue X100 (48-56), True Temper Dynamic Gold Tour Issue S400 (60)
Putter: Scotty Cameron T-5 Proto
Grip: Scotty Cameron Black Baby T
Grips: Golf Pride Tour Velvet Plus4
More photos of Kevin Tway’s WITB in the forums.
- LIKE0
- LEGIT0
- WOW0
- LOL0
- IDHT0
- FLOP0
- OB0
- SHANK0
Editor’s note: This is an excerpt from a piece our Andrew Tursky originally wrote for PGATour.com’s Equipment Report. Head over there for the full article.
The timing of Lowry’s putter changeup was curious: Was he just using a Spider putter because he was paired with McIlroy, who’s been using a Spider Tour X head throughout 2024? Was Lowry just being festive because it’s the Zurich Classic, and he wanted to match his teammate? Did McIlroy let Lowry try his putter, and he liked it so much he actually switched into it?
Well, as it turns out, McIlroy’s only influence was inspiring Lowry to make more putts.
When asked if McIlroy had an influence on the putter switch, Lowry had this to say: “No, it’s actually a different putter than what he uses. Maybe there was more pressure there because I needed to hole some more putts if we wanted to win,” he said with a laugh.
To Lowry’s point, McIlroy plays the Tour X model, whereas Lowry switched into the Tour Z model, which has a sleeker shape in comparison, and the two sole weights of the club are more towards the face.
Lowry’s Spider Tour Z has a white True Path Alignment channel on the crown of his putter, which is reminiscent of Lowry’s former 2-ball designs, thus helping to provide a comfort factor despite the departure from his norm. Instead of a double-bend hosel, which Lowry used in his 2-ball putters, his new Spider Tour Z is designed with a short slant neck.
“I’ve been struggling on the greens, and I just needed something with a fresh look,” Lowry told GolfWRX.com on Wednesday at the 2024 Wells Fargo Championship. “It has a different neck on it, as well, so it moves a bit differently, but it’s similar. It has a white line on the back of it [like my 2-ball], and it’s a mallet style. So it’s not too drastic of a change.
“I just picked it up on the putting green and I liked the look of it, so I was like, ‘Let’s give it a go.’”
Read the rest of the piece over at PGATour.com.
- LIKE0
- LEGIT0
- WOW0
- LOL0
- IDHT0
- FLOP0
- OB0
- SHANK0
Equipment
Webb Simpson equipment Q&A: Titleist’s new 2-wood, 680 blade irons, and switching to a broomstick Jailbird
With seven career wins on the PGA Tour, including a U.S. Open victory, Webb Simpson is a certified veteran on the course. But he’s also a certified veteran in the equipment world, too. He’s a gearhead who truly knows his stuff, and he’s even worked closely with Titleist on making his own custom 682.WS irons.
On Wednesday at the 2024 Wells Fargo Championship, I caught up with Simpson to hear about his experience with Titleist’s new prototype 2-wood, how Titleist’s 680 Forged irons from 2003 ended up back in his bag, and why he’s switching into an Odyssey Ai-One Jailbird Cruiser broomstick putter this week for the first time.
Click here to read our full story about Simpson’s putter switch on PGATOUR.com’s Equipment Report, or continue reading below for my full Q&A with Simpson at Quail Hollow Club on Wednesday.
See Webb Simpson’s full WITB from the 2024 Wells Fargo Championship here
GolfWRX: It seems like you’ve been a little all over the place with your irons in the past six months or so, and now going back to the 680’s. Is that just a comfort thing? What’s been going on with the irons?
Webb Simpson: Titleist has been so great at working with me, and R&D, on trying to get an iron that kind of modernizes the 680. And so the 682.WS took the T100 grooves, but kinda took the look and the bulk and the build of the 680’s into one club. They’re beautiful, and awesome looking. I just never hit them that well for a consistent period of time. It was probably me, but then I went to T100’s and loved them. I loved the spin, the trajectory, the yardage, but again, I never went on good runs. Going through the ground, I couldn’t feel the club as well as with the blade. So last week, I’m like, ‘Alright. I’m gonna go back more for…comfort, and see if I can get on a nice little run of ball striking.’
So that’s why I went back.
View this post on Instagram
OK, that makes sense. I know you had done some 2-wood testing recently. Is that in the bag right now?
It’s like day-by-day. I used it at Hilton Head every day. Valero, I used it one round. And this week, me and my caddie will do the book every morning, and if it’s a day where we think we need it, we’ll just put it in and take the 3-wood out. I love it because it’s a super simple swap. Like, it doesn’t really change much.
Yeah, can you tell me about that club? I mean, we don’t really know anything about it yet. You know? I haven’t hit it or anything, obviously.
It has grooves like a 3-wood. Spin is perfect. And it’s honestly, like, everything is in the middle of a 3-wood and driver number. Trajectory, spin, carry, all of it. So, a Hilton Head golf course is almost too easy to talk about because, you know, there, so many holes are driver 3-wood.
Valero, our thinking was we had two par-5’s into the wind, and we knew that it would take two great shots to get there in two. So instead of hitting driver-driver, we just put it in. And I used it on those holes.
Hilton was a little easier because it was off-the-tee kind of questions. But Colonial will be a golf course where, you know, there’s a lot of driver or 3-woods. It’s kind of like a backup putter or driver for me now. I’ll bring it to every tournament.
So it’s, like, in your locker right now, probably?
Well, it would be. It’s in my house [because Webb lives near by Quail Hollow Club, and is a member at the course.] It’s in the garage.
Oh, yeah, that’s right. Do you know what holes you might use it out here if it goes in play?
Potentially 15, depending on the wind. Second shot on 10. Could be 14 off the tee. The chances here are pretty low (that he’ll use the 2-wood). But, like, Greensboro would be an awesome club all day. I’m trying to think of any other golf courses.
There’s plenty that it’ll be a nice weapon to have.
It’s interesting, the wave of 2-woods and mini drivers. Like, it’s just really taken off on Tour, and all the companies have seemed to embrace it.
Yeah. The thing I had to learn, it took me, like, at least a week to learn about it is you gotta tee it up lower than you think. I kept teeing it up too high. You need it low, like barely higher than a 3-wood. And that was where I got optimal spin and carry. If you tee it up too high, you just don’t get as much spin and lose distance, I don’t know if that’s just a mini driver thing.
And you obviously have a Jailbird putter this week. What spurred that on?
Inconsistent putting. I’m stubborn in a lot of ways when it comes to my equipment, but I have to be open minded – I just hadn’t putted consistently well in a while. And I’m like, ‘Man, I feel my ball-striking coming along. Like I feel better; for real, better.’
If I can just get something in my hands that I’m consistent with. Being on Tour, you see it every year, guys get on little runs. I can put together four to five tournaments where I’m all the sudden back in the majors, or in the FedExCup Playoffs. You can turn things around quick out here. I’m like, ‘Man, whatever’s going to get me there, great.’
My caddie, David Cook, caddied for Akshay at the Houston Open and he putted beautifully. Then, I watched Akshay on TV at Valero, and he putted beautifully. And, I’m like, ‘I’m just going to try it.’
I’ve never tried it for more than a putt or two, and I just ordered what Akshay uses. It was pretty awkward at first, but the more I used it, the more I’m like, ‘Man, it’s pretty easy.’ And a buddy of mine who’s a rep out here, John Tyler Griffin, he helped me with some setup stuff. And he said at Hilton Head, he wasn’t putting well, then tried it, and now he makes everything. He was very confident. So I’m like, ‘Alright, I’ll try it.’”
And you’re going with it this week?
Hundred percent.
Alright, I love it. Thank you, I always love talking gear with you. Play well this week.
Thanks, man.
See Webb Simpson’s full WITB from the 2024 Wells Fargo Championship here
- LIKE24
- LEGIT2
- WOW1
- LOL1
- IDHT0
- FLOP0
- OB0
- SHANK2
Dave Portnoy places monstrous outright bet for the 2024 Masters
Things got heated at the Houston Open between Tony Finau and Alejandro Tosti. Here’s why
Justin Thomas on the equipment choice of Scottie Scheffler that he thinks is ‘weird’
Tiger Woods arrives at 2024 Masters equipped with a putter that may surprise you
‘Absolutely crazy’ – Major champ lays into Patrick Cantlay over his decision on final hole of RBC Heritage
Report: Tiger Woods has ‘eliminated sex’ in preparation for the 2024 Masters
Two star names reportedly blanked Jon Rahm all week at the Masters
Report: LIV Golf identifies latest star name they hope to sign to breakaway tour
Neal Shipley presser ends in awkward fashion after reporter claims Tiger handed him note on 8th fairway
What we know about Bryson DeChambeau’s 3D-printed Avoda irons
Kevin Tway WITB 2024 (May)
Kevin Tway what’s in the bag accurate as of the Wells Fargo Championship. More photos from the event here. Driver:...
Matthieu Pavon WITB 2024 (May)
Pavon’s WITB accurate as of the Wells Fargo Championship. More photos from the event here. Driver: Ping G430 Max (9...
WITB Time Machine: Rory McIlroy’s winning WITB, 2015 Wells Fargo Championship
Then-No. 1 player in the world Rory McIlroy began the week at the Wells Fargo Championship at 3-1 odds, if...
Akshay Bhatia WITB 2024 (May)
Akshay Bhatia what’s in the bag accurate as of the Wells Fargo Championship. Bhatia is deciding between drivers. More photos...
-
19th Hole3 weeks agoJustin Thomas on the equipment choice of Scottie Scheffler that he thinks is ‘weird’
-
19th Hole3 weeks ago‘Absolutely crazy’ – Major champ lays into Patrick Cantlay over his decision on final hole of RBC Heritage
-
19th Hole2 weeks agoLET pro gives detailed financial breakdown of first week on tour…and the net result may shock you
-
19th Hole3 days agoReport: LIV star turns down PGA Championship invite due to ‘personal commitments’
-
19th Hole1 week agoGary Player claims this is what ‘completely ruined’ Tiger Woods’ career
-
Whats in the Bag2 weeks agoTeam McIlowry (Rory McIlroy, Shane Lowry) winning WITBs: 2024 Zurich Classic
-
Equipment1 week agoGolf fans left surprised by LIV’s choice of course for its 2024 individual championship event
-
19th Hole1 week ago
LIV star splits with swing coach after working together for 14 years
Pingback: TOUR REPORT: John Daly’s bizarre irons, Tiger’s surprising equipment changes – GolfWRX
john
Dec 24, 2019 at 7:36 am
Like the man himself, they should probably be a lot chunkier.
jgpl001
Dec 16, 2019 at 4:10 pm
These look a little cheap and 1970’s to me
No drooling here..
Randy Copeland
Dec 12, 2019 at 7:43 pm
Muira’s made for Nike with Far Par stamped on them for sure no doubt.
lance
Dec 10, 2019 at 2:13 pm
Shovel back > muscle back
Tyler Durden
Dec 9, 2019 at 12:48 pm
This iron is specially ground in the back to make scooping sand or other impediments easier to sweep away
Caroline
Dec 7, 2019 at 8:44 pm
all the big OEM golf companies are in the business to make money and many to satisfy stock holders…it is very simple you make the best equipment you can with the highest margin you can. And when you sit down with that pencil to figure out how to make a good margin finding someone to make your product is always a consideration…
ewfnick
Dec 7, 2019 at 4:50 am
Wondered what the fuss was about and just seen what he did, nothing worse than a cheat, if he was playing in any of the groups I play with he would have caught a smack in the gob
Elvis Pwessley
Dec 7, 2019 at 12:34 am
Awww….my whittle comment got deweated!
Pricilla Presley
Dec 7, 2019 at 12:19 am
Uh oh, can he be the new douche Kooch replacement? I never liked his rolled shoulders and that smug look on his mug or that silly skip step as he pulls his ball out of the cup. Just an all around douche!
Dyson Bochambeau
Dec 6, 2019 at 8:51 pm
I hear his clubs give you improved lies
Brandon
Dec 6, 2019 at 7:36 pm
Fake news. Patrick Reed forged these himself using nothing but the finest American carbon steel and good old fashioned determination. He just had to move a little sand first in his backyard foundry so he could swing his sledge hammer better.
Clint
Dec 6, 2019 at 4:43 pm
These look like they have just enough sole to push some sand away from your ball in the bunker.
Rory
Dec 6, 2019 at 7:08 pm
No such thing as bad publicity, but I’m betting that’s not the first close up they wanted…..
Hdtvman
Dec 6, 2019 at 2:49 pm
Nice work, Lt. Columbia. What I like about Reed, like Tiger, he’s there to win, not chasing the money from major manufacturer’s. I’m sure he could name his price with any of them, but he plays what he likes and what works best for him.
jr
Dec 26, 2019 at 5:50 pm
Or maybe no sponsor wants him.
Hoganben
Dec 6, 2019 at 1:59 pm
Almost all forged irons look the same so may as well have one or two companies make them and they all look the same because one or two companies make them. Ps….I could design Tiger’s new irons…his irons are always the same with just a different brand name on them!!
Geoffrey Holland
Dec 6, 2019 at 1:48 pm
The loost art of proofreading strikes again.
“the irons are Manufactured by Emory JPN Co.
Here’s where the detective work kicks in: I went beyond the USGA’s list and starting searching for Emery JPN Co.”
Paul
Dec 6, 2019 at 2:27 pm
Who cares, get a life.
Jethro
Dec 6, 2019 at 3:28 pm
Your name is misspelled. It should be Jeffrey. Lol!
Waka waka
Dec 6, 2019 at 4:26 pm
Preach!!!!
Geoffery The Girraffe
Dec 6, 2019 at 4:21 pm
ironic typo in his own comment then!
Rory
Dec 6, 2019 at 7:06 pm
I think he has looooost his mind
Tim
Dec 7, 2019 at 8:18 am
Loost..Proof..???
Gary
Dec 6, 2019 at 11:51 am
As soon as I saw them I thought Epon. The shape and finishing just looks like what I’m used to seeing from Epon.
Also if you connect the dots you’ll probably find that Endo forges the blanks that Artisan uses. That’s probably where the connection started.