Connect with us

Equipment

New 2020 Cleveland Launcher HB Turbo driver

Published

on

The all-new-for-2020 Cleveland Launcher driver has been designed to hit the ball higher, straighter, and—thanks to a redesigned cup face, and higher balance point shaft—faster, too.

The Cleveland Launcher name is synonymous with distance. Multiple versions of the flagship Launcher driver found their way into players bags dating back to pre-400cc drivers, through composite products (Cleveland Comp, anyone?). It’s not an understatement to say the club transformed Cleveland’s metal wood segment.

2020 cleveland launcher

2020 Cleveland Launcher crown detail.

After a bit of a hiatus, the Launcher name was relaunched (sorry, had to do it) two years ago to glowing reviews and positive player feedback. The engineers at Cleveland decided 2020 was the time to turbocharge the new Cleveland driver.

 “(With the Launcher HB Turbo) We’ve squeezed discretionary weight out of every corner of the head in order to produce one of the most forgiving drivers we’ve ever made.”

-Vice President of Research and Development at Cleveland Golf Jeff Brunski

2020 cleveland driver face

2020 Cleveland Launcher HB Turbo: Details

When talking about discretionary mass, every single gram matters. In a 200g driver head, every two grams saved is one percent more mass to move around. When talking about a driver head and collisions taking place at over 100 mph, every percentage point matters. One of the most wasteful parts of any clubhead is the hosel—whether it be because of adjustability or just a traditional glue in a non-adjustable head.

The original Cleveland Launcher HB was not adjustable, which meant it was already saving some mass, but the engineers at Cleveland went a step further with the new HB Turbo and implemented more than just one technology beyond the hosel to make this new Cleveland driver even faster.

2020 cleveland launcher hb turbo crown

  • Ultralight hosel: By redesigning the hosel both inside and outside of the head, more mass was able to be distributed low and further away from the face to increase forgiveness.
  • Turbocharged CupFace: OEMs cant make the center of the head faster— it’s the rules—but it doesn’t mean they cant speed up more of the face. The new Turbocharged CupFace, has been enhanced with a new variable face thickness to provide higher CT (characteristic time) over a larger area for increased ball speeds and more distance—because nobody hits the middle every time.
  • HiBore Crown: The newly shaped crown on the Launcher HB Turbo lowers the CG (center of gravity) by a full 2.2mm when compared to the Launcher HB. This improves overall forgiveness and helps to better optimize launch parameters for shots hit all over the face.

When it comes to improvements, Cleveland isn’t stopping with the clubhead either. The new Launcher HB Turbo is being paired with a new proprietary high-balance point Miyazaki C. Kua shaft. By raising the center of gravity closer to the grip end of the club, players have the ability to swing the driver faster, even though more mass has been added to the head to give the Launcher HB Turbo an MOI boost.

This is where club designers are looking beyond just the driver head and analyzing the club as a whole system. The better the whole system works together, the better you are going to hit the ball. It’s also beneficial that Cleveland is under the SRI Sports Umbrella, which also includes Srixon and Miyazaki. Miyazaki shafts are extremely high quality and are all proprietary to SRI products.

New Cleveland driver: Options and availability

The Cleveland Launcher HB Turbo driver is available in two different models

Standard/neutral weighting will be available in lofts of 9, 10.5, and 12 degrees.

There will also be a Launcher HB Turbo Draw model with more discretionary weight placed towards the heel. It will come in a 10.5-degree loft.

cleveland-launcher-hb-turbo-driver-specs

The suggested retail price of both models will be $349.99, and the drivers will be available starting October 4.

Your Reaction?
  • 194
  • LEGIT20
  • WOW18
  • LOL6
  • IDHT3
  • FLOP4
  • OB2
  • SHANK28

Ryan Barath is a club-fitter & master club builder with more than 17 years of experience working with golfers of all skill levels, including PGA Tour players. He is the former Build Shop Manager & Social Media Coordinator for Modern Golf. He now works independently from his home shop and is a member of advisory panels to a select number of golf equipment manufacturers. You can find Ryan on Twitter and Instagram where he's always willing to chat golf, and share his passion for club building, course architecture and wedge grinding.

14 Comments

14 Comments

  1. Carolina Golfer

    Sep 10, 2019 at 7:54 am

    Another WRX article with negative replies. Do you guys like anything or just like to complain?

    • JP

      Sep 11, 2019 at 3:16 am

      I like to complain about poor golf design ideas.

  2. SV

    Sep 9, 2019 at 4:51 pm

    I don’t see the lack of adjustability as a problem. As a whole most people are probably better off without it. Find the right loft and leave it alone (says the guy always adjusting). But come on Cleveland, only one option for lefties? At least give us two (9* & 12* or 10.5* & 12*).

  3. George Steer

    Sep 9, 2019 at 2:52 pm

    All of the writing on the clubhead comes off as cheap. If they feel the need to explain the features, utilize peel of stickers.

    • Donn

      Sep 14, 2019 at 7:27 pm

      peel off stickers seem cheapo to me. I prefer them writing on the clubhead. a few years down the line and you are shopping used, the info written on the clubhead helps you to know what’s the important design stuff.

  4. JP

    Sep 9, 2019 at 2:10 pm

    Turbo? Why? Why? Why?

    Do they actually know what a turbo is?

  5. DukeOfChinoHills

    Sep 9, 2019 at 12:32 pm

    I had a Launcher back around 2004-05ish and really liked it. This new one looks cool, but I’m not in the market now.

  6. Getemgoose

    Sep 9, 2019 at 12:24 pm

    So the Cleveland Turbo threw on some Ping turbulators. Cool story.

  7. Jarnio Bubly

    Sep 9, 2019 at 11:49 am

    It’s always faster than last year! The faster we say it is the more consumers will get over how hideous it looks. Get out your pocket book! ????

  8. 15th Club

    Sep 9, 2019 at 11:21 am

    Wait just a minute. Is this a non-adjustable hosel? If so; uh, yeah it will be lighter. A lot lighter. At the cost of any adjustability. If I am wrong about this, somebody please correct me ASAP.

    Also; this is just me talking but how many players who are GolfWRX readers want and need a higher-launching driver? For my part, a driver head that launches LOWER is usually better, all other things being equal. I would love to own a driver with 10.5 degrees of loft. But I would hit it way too high. More static loft = more control and more straight. Like a 7-iron. But that kind of loft produces balloon drives. I want the highest loft possible, in the lowest-hitting driver possible.

  9. PI

    Sep 9, 2019 at 10:05 am

    I’ve been testing this driver out for the last year or so and I have to say it is right up there with the best drivers. I have the TS3 in play now and this club in testing was just as good if not better than the TS3.

  10. JP

    Sep 9, 2019 at 9:47 am

    Seriously?!? Writing on the crown?!? And why do they all have to copy each other with raised fins on top? It’s busy and ugly.

    • Angus

      Sep 9, 2019 at 3:11 pm

      What on earth has the writing got to do with anything, you can’t even see it when using the club, how it performs is what is important

      • JP

        Sep 12, 2019 at 3:55 am

        You’re blind if you can’t read all about the hibore tech on the crown at address…

Leave a Reply

Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Whats in the Bag

Kris Kim WITB 2024 (May)

Published

on

Driver: TaylorMade Qi10 (9 degrees @7)
Shaft: Mitsubishi Tensei 1K White 60 TX

3-wood: TaylorMade Qi10 Tour (15 degrees @13.5)
Shaft: Mitsubishi Diamana WB 73 TX

Irons: TaylorMade P770 (2, 4), TaylorMade P7MB (5-PW)
Shafts: Mitsubishi Tensei 1K White 80 TX (2), Nippon N.S. Pro Modus3 Tour 120 X

Wedges: TaylorMade MG4 (50-09SB, 56-12SB, 60-11TW)
Shafts: Nippon N.S. Pro Modus3 WV 125

Putter: TaylorMade Spider Tour

Grips: Golf Pride Tour Velvet Cord

Check out more in-hand photos of Kris Kim’s equipment here.

 

View this post on Instagram

 

A post shared by GolfWRX (@golfwrx)

Your Reaction?
  • 0
  • LEGIT0
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

Equipment

Welcome to the family: TaylorMade launches PUDI and PDHY utility irons

Published

on

TaylorMade is continuing its UDI/DHY series with the successor to the Stealth UDI and DHY utility irons: PUDI and PDHY (which the company styles as P·UDI and P·DHY). TaylorMade is folding the designs in with its P Series of irons.

TaylorMade outlined the process of developing its new utilities this way. The company started with the data on utility iron usage. Not surprisingly, better players — i.e. those who generate more clubhead speed and strike the ball more precisely — were found to gravitate toward the UDI model. DHY usage, however, covered a wider swath than the company might have expected with six-to-18 handicappers found to be bagging the club.

TaylorMade also found that the majority of golfers playing UDI or DHY utilities were playing P Series irons at the top of their iron configurations.

Can you see where this is going?

Matt Bovee, Director of Product Creation, Iron and Wedge at TaylorMade: “As we look to the future, beyond the tech and the design language, we are excited about repositioning our utility irons into the P·Series family. P·UDI is an easy pair for players that currently play P·Series product and P·DHY is an extremely forgiving option for players of all skill levels. It is a natural fit to give these players the performance in this category that they are looking for.”

 

View this post on Instagram

 

A post shared by GolfWRX (@golfwrx)

TaylorMade PUDI

TaylorMade PUDI technology cutaway (via TaylorMade)

Crafted with tour player input, TaylorMade sought to develop a confidence-inspiring utility iron that blends with the rest of the P Series irons. Also of note: Interestingly, the PUDI has a more compact head than the P790.

In comparison to past UDI products, the PUDI has a more traditional iron shape, slimmer toplines, and less offset with a little of the backbar visible at address.

TaylorMade PDHY

TaylorMade PDHY tech cutaway (via TaylorMade).

Larger in profile than the PUDI, the PDHY seeks to position center of gravity (CG) lower in the club for ease of launch. The toe height is larger and the profile is larger at address — roughly five millimeters longer than PUDI — the sole of the club is wider for improved forgiveness.

Club Junkie’s take

Golfers who feel like they are missing something at the top of the bag could find the PUDI or PDHY a great option. The look of the PUDI should fit the most discerning eye with a more compact look, less offset, and a thinner topline. If you want a little more confidence looking down the P-DHY will be slightly larger while still being a good-looking utility iron.

For being small packages both models pack a pretty good punch with fast ball speeds, even off-center. The feel is soft and you get a solid feel of the ball compressing off the face when you strike it well. Your ears are greeted with a nice heavy thud as the ball and club come together. The PDHY will launch a little higher for players who need it while the PUDI offers a more penetrating ball flight. Both utility irons could be the cure for an open spot in the top end of the bag.

PUDI, PDHY, or Rescue?

TaylorMade offers the following notes to assist golfers in filling out their bags:

  • PUDI has mid-CG right behind the center face to create a more penetrating mid-to-low ball flight
  • PDHY has a lower center of gravity to produce an easier-to-launch mid-to-high ball flight.
  • Both PUDI and PDHY are lower-flying than the company’s hybrid/Rescue clubs.
  • PUDI is more forgiving than P790.
  • PDHY is the most forgiving iron in the entire TaylorMade iron family

Pricing, specs, and availability

Price: $249.99

At retail: Now

Stock shafts: UST Mamiya’s Recoil DART (105 X, 90 S and 75 R – only in PDHY)

Stock grip: Golf Pride’s ZGrip (black/grey)

PUDI lofts: 2-17°, 3-20°, 4-22° in both left and right-handed

PDHY lofts: 2-18°, 3-20° and 4-22° in both left and right-handed

Your Reaction?
  • 15
  • LEGIT4
  • WOW3
  • LOL3
  • IDHT1
  • FLOP2
  • OB2
  • SHANK5

Continue Reading

Equipment

Coolest thing for sale in the GolfWRX Classifieds (5/3/24): Scotty Cameron Champions Choice 2.5+ putter

Published

on

At GolfWRX, we are a community of like-minded individuals that all experience and express our enjoyment of the game in many ways.

It’s that sense of community that drives day-to-day interactions in the forums on topics that range from best driver to what marker you use to mark your ball. It even allows us to share another thing we all love – buying and selling equipment.

Currently, in our GolfWRX buy/sell/trade (BST) forum, there is a listing for a Scotty Cameron Champions Choice 2.5+ putter

From the seller: (@wwcl): “Has been gamed as pics show. 33.5 includes original h/c and grip. $575 includes shipping and PP fees.”

To check out the full listing in our BST forum, head through the link: Scotty Cameron Champions Choice 2.5+ putter

This is the most impressive current listing from the GolfWRX BST, and if you are curious about the rules to participate in the BST Forum you can check them out here: GolfWRX BST Rules

Your Reaction?
  • 1
  • LEGIT1
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

WITB

Facebook

Trending