Equipment
New for 2020, Callaway Jaws MD5 wedges boast more bite
Say hello to the new 2020 Callaway Jaws MD5 wedges from Callaway Golf. Redesigned from the ground up to create ultimate performance on all shots, the new Jaws wedges are being marketed as the most aggressive grooves in golf.
It’s been almost 10 years since we’ve seen the Jaws name used as part of the Callaway wedge lineup, but with the introduction of the new MD5 (Mack Daddy 5) Jaws wedges and their completely rethought-out groove design, Callaway felt that if there was a time to bring it back, it’s now!
Callaway Jaws MD5 wedges: The story
The Rules of Golf have limits set on everything, but when you have a lot of smart people trying to solve problems, those limits just mean you have to get creative with design. That’s exactly what the engineers have done with the new Callaway wedge and its Jaws grooves. By changing the overall shape compared to all previous models, they have increased not just spin but total control. That’s probably the most overlooked part of the wedge equation: creating greater control and consistency. Sure, more spin is great, but if it fluctuates from shot to shot, you are in no way better off.
The new proprietary groove design of the Jaws wedge is a change to the whole shape, including a different way to get the contact radius right to the limit, and when we say right to the limit, we mean it. In fact, when initially prototyped and brought to Callaway’s manufacturing partners for scaled-up manufacturing, the initial response from the factory after test runs was “sorry, we just can’t do this.” The reason? Fail rate was close to 50 percent becoming nonconforming which is a big no-go in the world of manufacturing. Such a situation would drive cost (because of losses) through the proverbial roof, especially when you consider each wedge’s face takes 10 minutes of machine time—not including the microgrooves.
The solution for Callaway? Changing the cutting tool every 15 wedges. Sure, you could attempt to get more life out of each tool, but when you have everyone from recreational players to the world’s best putting them in play, you can’t make sacrifices.
The end result is the MD5 Jaws spins over 10 percent more on shots hit around the green compared to the Callaway MD4 and launches lower by one degree (for those wondering if one degree matters: yes it does). Lower launch might not seem like something you want with a wedge, but if you talk to any short game coach with a launch monitor, or Roger Cleveland in Callaway’s case, you will quickly realize that being able to control launch with a wedge is just as important and is it with a driver. A lower-launching wedge means the coefficient of friction is higher since the ball isn’t riding/sliding up the face—and boom, you have a greater ability to hit the better-player-preferred “low checker.”
Now beyond the grooves, Callaway and the wedge team re-evaluated the whole shape and profile of the MD5 Jaws, along with the grind options. As the trend of more players swapping their stock pitching wedges for wedges that match the lower end of the bag (up to 45-46 degrees). Callaway designers decided to reshape the lower lofted wedges from the 46-56 degrees to have a smaller profile and flow better from the lowest to highest loft in the wedge set. Don’t think this is just for looks either—smaller heads allow for more concentrated mass and with a smaller shape comes better workability. There is no sense in trying to replace your stock set pitching wedge with a less versatile option.
The other reason for this change in the MD5 Jaws wedges is that data and player testing shows the 46- 56-degree clubs are used a lot more often for full shots compared to the higher lofted wedges, which are more likely than not to be hit with a more open face. This creates the ability to flight and control the ball better with the “full swing” clubs, yet still gives more face surface area to hit when the higher lofted “around the green” clubs and opened up. It’s a “best of both worlds” design philosophy. Instead of committing to a single size and shape for the whole line—which from a manufacturing perspective is less expensive—Callaway pulled out all the stops in making the Jaws wedges better, not just newer.
With all the talk of reshaping, the last part of this puzzle are the sole grinds. From the C Grind to the W (wide) sole wedges, everything has been tweaked. One of the best examples of this tweaking is the new lower bounce W (Wide) sole wedge. Mr. Roger Cleveland himself was doing a lot of customizing for tour players to tweak the stock MD4 W Grinds to reduce bounce and width of the soles, and after seeing this trend, the most popular tweak has now become a stock option on the MD5 Jaws.
There is even additional heel relief to help those players that want to open the face up for shots around the green. The opposite could be said about the new C Grind; with more effective bounce thanks to a wider center of the sole—but more playability with aggressive heel and toe relief. What seem like small changes are really a commitment to continued improvement by the wedge team at Callaway Golf, and I think with the MD5 Jaws wedges they have a winner destined to take a BITE out of the wedge market (Give me credit for taking this long to make a shark pun).
Customs
With the new MD5 Jaws, Callaway is upping its Customs game with 10 different “zones” to choose from, including the paint fill on the sole, the hosel, new medallion options (including emojis), and the back of the club. More ways to customize your wedge than ever before!
Callaway Jaws MD5 wedges: Availability and options
Shafts
Steel: True Temper Tour Issue 115 with a blue and silver shaft band
Graphite: Project X Catalyst 80g
Grip: Lamkin UTX Blue
Price: $159.99
- LIKE156
- LEGIT21
- WOW7
- LOL10
- IDHT1
- FLOP8
- OB9
- SHANK25
Whats in the Bag
Steve Stricker WITB 2024 (April)
- Steve Stricker WITB accurate as of the Zurich Classic. More photos from the event here.
Driver: Titleist TSR3 (9 degrees, C4 SureFit setting)
Shaft: Fujikura Motore Speeder VC 7.2 X
3-wood: Titleist 915F (13.5 degrees)
Shaft: Mitsubishi Tensei CK Pro White 80 TX
Hybrid: Titleist 816 H1 (17 degrees)
Shaft: Fujikura Motore Speeder VC 9.2 X
Irons: Titleist T200 (3, 4), Titleist T100 (5-9)
Shafts: Project X 6.5
Wedges: Titleist Vokey SM8 (46-10F @55), Titleist Vokey SM10 (54-10S @53), Titleist Vokey SM4 (60 @59)
Shafts: True Temper Dynamic Gold X100 w/Sensicore
Putter: Odyssey White Hot No. 2
Ball: Titleist Pro V1x
Grips: Golf Pride Tour Velvet Grip Rite
Check out more in-hand photos of Steve Stricker’s clubs here.
- LIKE0
- LEGIT0
- WOW0
- LOL0
- IDHT1
- FLOP0
- OB0
- SHANK0
Whats in the Bag
Alex Fitzpatrick WITB 2024 (April)
- Alex Fitzpatrick what’s in the bag accurate as of the Zurich Classic.
Driver: Ping G430 LST (10.5 degrees)
Shaft: Fujikura Ventus Black 6 X
3-wood: TaylorMade Qi10 (15 degrees)
Shaft: Fujikura Ventus TR Black 7 X
Hybrid: Ping G430 (19 degrees)
Shaft: Fujikura Ventus Black HB 10 TX
Irons: Ping iCrossover (2), Titleist T100 (4-PW)
Shafts: Fujikura Ventus Black HB 9 TX (2), Nippon N.S. Pro Modus 3 Tour 120 X (4-9)
Wedges: Titleist Vokey Design SM10 (50-12F, 56-12D, 60-08M)
Shafts: Nippon N.S. Pro Modus 3 Tour 120 X
Putter: Bettinardi SS16 Dass
Grips: Golf Pride MCC
Check out more in-hand photos of Alex Fitzpatrick’s clubs here.
- LIKE1
- LEGIT0
- WOW0
- LOL0
- IDHT0
- FLOP0
- OB0
- SHANK0
Equipment
What’s the perfect mini-driver/shaft combo? – GolfWRXers discuss
In our forums, our members have been discussing Mini-Drivers and accompanying shafts. WRXer ‘JamesFisher1990’ is about to purchase a BRNR Mini and is torn on what shaft weight to use, and our members have been sharing their thoughts and set ups in our forum.
Here are a few posts from the thread, but make sure to check out the entire discussion and have your say at the link below.
- PARETO: “New BRNR at 13.5. Took it over to TXG (Club Champ but TXG will always rule) in Calgary for a fit. Took the head down to 12, stuck in a Graphite Design AD at 3 wood length and 60g. Presto- numbers that rivaled my G430Max but with waaaaay tighter dispersion. Win.”
- driveandputtmachine: “Still playing a MIni 300. The head was only 208, so I ordered a heavier weight and play it at 3 wood length. I am playing a Ventus Red 70. I play 70 grams in my fairways. I use it mainly to hit draws off the tee. When I combine me, a driver, and trying to hit a draw it does not work out well most of the time. So the MIni is for that. As an aside, I have not hit the newest BRNR, but the previous model wasn’t great off the deck. The 300 Mini is very good off the deck.”
- JAM01: “Ok, just put the BRNR in the bag along side a QI10 max and a QI10 3 wood. A load of top end redundancy. But, I have several holes at my two home courses where the flight and accuracy of the mini driver helps immensely. Mine is stock Proforce 65 at 13.5, I could see a heavier shaft, but to normal flex, as a nice alternative.”
Entire Thread: “What’s the perfect Mini-Driver/Shaft combo? – GolfWRXers discuss”
- LIKE3
- LEGIT1
- WOW0
- LOL0
- IDHT0
- FLOP0
- OB0
- SHANK2
-
19th Hole2 weeks ago
Dave Portnoy places monstrous outright bet for the 2024 Masters
-
19th Hole4 days ago
Justin Thomas on the equipment choice of Scottie Scheffler that he thinks is ‘weird’
-
19th Hole2 weeks ago
Tiger Woods arrives at 2024 Masters equipped with a putter that may surprise you
-
19th Hole4 days ago
‘Absolutely crazy’ – Major champ lays into Patrick Cantlay over his decision on final hole of RBC Heritage
-
19th Hole2 weeks ago
Two star names reportedly blanked Jon Rahm all week at the Masters
-
19th Hole1 week ago
Report: LIV Golf identifies latest star name they hope to sign to breakaway tour
-
19th Hole2 weeks ago
Neal Shipley presser ends in awkward fashion after reporter claims Tiger handed him note on 8th fairway
-
19th Hole1 week ago
Brandel Chamblee has ‘no doubt’ who started the McIlroy/LIV rumor and why
Pingback: Ein genauerer Blick auf die neuen Callaway Jaws Raw Wedges - Nach Welt
Pingback: GolfWRX Spotted: Prototype Callaway Jaws wedge – GolfWRX
Pingback: Best wedges of 2021: Traditional – GolfWRX
Sean
Oct 9, 2019 at 6:14 am
Great wedges. Well worth the investment.
chadj
Sep 10, 2019 at 8:13 pm
No LH 46 degree or 64 degree, but 5 different LH options for a 60 degree. Seems fair callaway….idiots
Milo
Sep 10, 2019 at 7:07 pm
Why are wedges so damn expensive?
gwelfgulfer
Sep 11, 2019 at 9:00 am
Because people continue to pay the prices. Lemmings will always lemming.
DB
Sep 10, 2019 at 3:10 pm
They look good, forged or cast?
Greg
Sep 10, 2019 at 12:31 pm
The steel shaft offering sucks.
Travisty
Sep 10, 2019 at 9:26 am
These are actually a nice step forward from MD4 (and MD3 before that). Callaway is doing great things in their wedge department. The black finish here IMO is much better than before too.
Off-Centre ChromeSoft
Sep 10, 2019 at 8:05 am
Find it, cut it.
Bradley
Sep 10, 2019 at 7:46 am
I wonder if Callaway clubs are off like there golf balls?