Connect with us

Equipment

Titleist T-Series irons: Ultimate tour performance

Published

on

New technology, new name: The Titleist T-Series irons.

The concept behind the T-Series started with one goal: To produce the best performing, most technology packed, playable irons, ever produced by Titleist…simply put: mission accomplished! With the launch of the new T100, T200, and T300s, Titleist is ushering in a new era of forgiveness, speed, and control with Max Impact.

What does that mean? Before diving into Max Impact, let’s start with the control part. With the launch of the new T-Series, Titleist is reminding golfers that fitting is the key to maximizing your set. From wedges to woods, each club should serve a distinct purpose and earn its spot in your bag—never carry a club because you “think” you need it, carry the clubs you know you will use.

Titleist calls this is the 3D Fitting Process

  • Distance
  • Dispersion
  • Descent

Focusing on these factors ensures each iron in your bag is creating the proper parameters to improve scoring. Statistics prove that the closer you hit it to your target (descent and dispersion) the likelihood of getting the next shot closer (or in the hole) goes way up—it’s the strokes gained principle pioneered by Mark Broadie. Each iron in the T-Series has been designed to blend with the other models including the 620 series blades and CBs to make sure regardless of your final set make up it transitions on both looks and performance. With the new T-Series, the larger the number model 100, 200, 300, the faster the ball speeds and the higher the launch. Add the all-new Max Impact Technology, and you have three distinct iron sets designed to help any player find the performance they are looking for.

Titleist T100 irons

Built from the ground up with direct input from Titleist’s PGA Tour staff, the mission statement from the design team for the new T100 was to simply create the best performing tour iron ever—NOT “the best AP2.” With a shape that is distinctly Titleist but completely redefined as far as offset, top line, sole width, camber, and blade length, the T100 gives players looking for a tour performance iron more playability than ever before.

Co-forged with large amounts of tungsten (66g on average in the 3-7 irons) in the heel and toe, the T100 looks a lot more like a single-piece forged players cavity back than multi-piece forgiveness monster, but looks can be deceiving. It has the thinnest face they have ever built into a true forged players club, which allows designers to push more mass around the head and create greater ball speed, which is a never a bad thing especially when you consider that it still has a fully supported face.

Just like with club technology, turf conditions are always evolving with new grass types and mower techniques. This means where the club contacts the ground has to evolve too, which is exactly what has happened to the whole T-Series including the T100. Sole width and profiles have been reduced to offer more camber and radius, which through the testing process has lead players to say the same thing over and over: “they feel faster through the turf.” That’s from Marni Ines, Director, Titleist Irons Development. It’s not that they actually go through that much faster but they react through the ground much more efficiently, which means as course conditions vary, whether through the season or thanks to traveling, you are going to great results shot after shot.

(Club fitter thought break for a moment)

I can’t reiterate this enough: In the world of designing golf clubs, the rules set forth by the governing bodies along with mass totals for club heads will always create a unique challenge for engineers. Every single gram saved is valuable in creating higher MOI, better COG placement, and optimizing ball speed. Tweaks that might appear to be small can actually make a big difference for some players, for example; a simple change in sole shape. What we are seeing is the practice of marginal gains, which can be summed up by this practical application: rather than attempt to improve one thing by 10 percent, improve 10 things by 1 percent to equal better results. Now take it further and imagine if you improve 10 measurable factors by 1.5 percent, these are tangible numbers for increased performance.

So why do I bring this up? It’s because this is how engineers work to help you play better golf. All these small changes compounded together make for big improvements to your golf game. It’s about using every technology available in both production and design to create improvement. If you can change three parameters to get angle of decent two percent higher from 43 degrees to 45 degrees that’s greater stopping power to help you get closer to flags, equaling the potential to score better. Something we all want to do.

Speaking to technology jumps, this bring us to…

MAX Impact

Max Impact is a combination of technologies that pairs the thinnest faces Titleist has ever produced with structural support and polymer core behind the geometric center of the face to increase speed, launch, and improve feel.

So about the supporting polymer: It’s not some run of the mill, “Hey that sound like a good idea,” piece of just anything. If there is one thing Titleist knows beyond how to make the number one irons on tour, it’s polymers. With help from the golf ball R&D Team, the Titleist Iron engineers went through a multitude of options before settling on the what was the final variation based on density, rebound properties and finally acoustic enhancement. As they explained,

“Think of the unsupported face like a trampoline, pulled tight with a huge potential for rebound. Now take that trampoline and put an exercise ball underneath it right in the middle. You’re going to bounce higher and increase the rebound not only in the middle but also when you don’t catch the middle of the trampoline – That’s the application of the Max Impact.”

So what do we do about all of this speed? The one thing players often talk about is the inconsistency in distance they see from irons with unsupported faces (“hotspots”) that occur on shots hit around the face. During my discussion with the engineering team, I asked if these “hotspots” still really exist on modern irons and to my surprise I was told in one way or the other “YES…BUT.” These shots that go further don’t actually come from the face being hotter in one area, they come from gear effect from shots usually hit high on the face above the center of percussion…

Center of percussion? Let’s explain that before going any further (Thanks Harvard Natural Sciences Lecture) “The center of percussion (COP) is the place on a bat, racket, or golf club where it may be struck without causing reaction at the point of support. When a ball is hit at this spot, the contact feels good and the ball seems to spring away with its greatest speed and therefore this is often referred to as the sweet spot.”

Just like with a driver, shots hit above that area will launch higher with less spin—that creates parameters for shots to go further. But if you can prevent that from happening or shrink that area, the likelihood of those shots occurring goes WAY down and you get a much more consistent ball flight. That’s part of the genius of Max Impact, not only does it help create greater speed but creates more consistent speed and launch conditions all over the face. Everything you want in an iron built for speed in a players package.

Titleist T200 irons

The first thing you’ll notice that makes the T200 unique from any Titleist iron before it is Max Impact Technology. I realize this sounds very different from any Titleist iron before it and…well…that’s because it is.

Thanks to new materials and manufacturing techniques, along with lessons learned through the introduction of the Concept Series and Speed Project, the T200 has an unsupported (by metal) Forged L-Face that not only feels great but flexes for more ball speed. Thanks to the weight savings of the thinner Forged L-face, more tungsten (average of 90g from the 4-7-irons) can be placed low and on the perimeter of the club to increase forgiveness and overall total stability where players need it.

That’s part of the reason stronger lofts are required—these things really do LAUNCH. Max Impact isn’t found in every T200 though, it has been placed in the 4- 7 irons because Titleist player testing and data crunching proved time after time that as players get away from their scoring clubs distance gapping and dispersion becomes an issue. This is where the 3D fitting process makes sure every club in the set has a purpose and hits a proper flight and distance.

Titleist T300 irons

If you just look at the spec for the T300, I already know what you’re going to say “WOW, these lofts are jacked, no wonder they go so far.” That’s not the full story, and at this point in golf technology, I’m completely over hearing that as an excuse for players to NOT trying a club. This comes from the perspective of a fitter rather than a player—not the other way around.

The T300 is the hottest and most forgiving Titleist iron ever made. Just like its smaller brother, the T200, it uses the same Max Impact Technology to both add rebound and improve overall feel. The unsupported face is stretched across a larger area thanks to the bigger face size, wider sole, and undercut perimeter to push the COG low and away from the face—if the T200 launches, then the T300 REALLY Launches! This deep COG and thin fast face is what makes this club launch so high, it’s also the reason stronger lofts are necessary. If it wasn’t for strong lofts, then with the speed and spin they would create at “standard” lofts, ball flight would end up uncontrollable. Basically the exact opposite of what you want in an iron.

Part of how they were able to make the T300 the most forgiving Titleist iron ever is by actually eliminating a part of the club that was beneficial in previous models (like the AP1)—hollow-body construction. Even with a hollow-body design, there is unnecessary weight placed high along the back of the club.

Generally for many designs this is fine because the wall thickness is minimal, and thanks to smarter people than me, this allows for more flexing of the body of the club to enhance ball speeds. But if given the option between the two, a fully undercut iron would have a higher MOI and help create that same trampoline when engineered properly and free up more discretionary mass. For the T300, Max Impact is found in the 4-7 irons to again help with launch and speed and create proper set gapping.

Stock Shafts & Availability

Titleist has one of the largest available shaft matrices available through custom order, but the stock shafts for each model are as follows.

Steel

T100 – True Temper AMT Tour White AMT White
T200- True Temper AMT Black AMT Black
T300- True Temper AMT Red AMT Red

Graphite

This is a new one for Titleist. Just like with the original True Temper AMT, they will be the first to offer the Mitsubishi MCA Tensei AM2 (stands for ascending mass) shafts that will come in  versions White, Blue, & Red.

T100 – Mitsubishi MCA Tensei White AM2 | Low launch, low spin | 94-108g (2g per club)
T200- Mitsubishi MCA Tensei Blue AM2 | Mid launch, mid spin | 74-88g (2g per club)
T300- Mitsubishi MCA Tensei Red AM2 | High launch, mid-high spin | 54-68g (2g per club)

T-SERIES AVAILABILITY: New Titleist T-Series irons will be available in golf shops worldwide beginning Aug. 30, with fittings beginning Aug. 8. With Pricing of the T100 and 200 set at $175 per club with steel ($1,399/set of 8) and $187.50 per club ($1,499 /set of 8) graphite

T300 will be $125 per club ($999/set of 8) Steel & $137.50 per club ($1,099/set of 8) graphite

Your Reaction?
  • 136
  • LEGIT12
  • WOW7
  • LOL9
  • IDHT3
  • FLOP7
  • OB6
  • SHANK63

Ryan Barath is a club-fitter & master club builder with more than 17 years of experience working with golfers of all skill levels, including PGA Tour players. He is the former Build Shop Manager & Social Media Coordinator for Modern Golf. He now works independently from his home shop and is a member of advisory panels to a select number of golf equipment manufacturers. You can find Ryan on Twitter and Instagram where he's always willing to chat golf, and share his passion for club building, course architecture and wedge grinding.

23 Comments

23 Comments

  1. B LANEY

    Aug 19, 2019 at 4:24 pm

    Do you guys have an editor? If not, please hire one. The spelling and grammar errors across the site are sloppy very unprofessional.

  2. bill

    Aug 19, 2019 at 3:20 pm

    whats the offset?

  3. Nate

    Aug 19, 2019 at 2:06 pm

    You negate the question, but then don’t answer it – WHY does Titleist use these ridiculous loft angles!? PSA to anyone at Titleist – I was actually getting into the idea of getting these T200s, but when I see these loft angles, I just think that you guys are trying to fool us into thinking our X iron goes further than the competition and that makes me really not want to get these. Is there a reasonable explanation why??

  4. Aztec

    Aug 17, 2019 at 1:55 am

    These are UGLY…

  5. s

    Aug 8, 2019 at 5:10 pm

    Now that PW is a 150yd club, we will need to buy 5-6 Vokey wedges to fill the gap. Way to go, Titleist!

  6. Pelling

    Aug 8, 2019 at 6:31 am

    Junk.

    • Bing Hogan

      Aug 8, 2019 at 10:20 am

      Yep, and embarrassing to have in the bag.

  7. Bobby

    Aug 7, 2019 at 8:32 pm

    The T300 will be in my bag ASAP. AP1s were great. If these are better, sign me up.

  8. Bing Hogan

    Aug 7, 2019 at 9:43 am

    Time to have a PW distance contest

  9. Robstercsi

    Aug 7, 2019 at 5:16 am

    See you’ve changed the spelling of ‘descent’ now – no thanks needed, and best wishes, Rob

  10. Mark

    Aug 7, 2019 at 2:05 am

    Dear Mr. Barath,

    I have an interest in golf club technology but possess limited knowledge. Given your extensive knowledge, please would you be so kind as to explain what the terms “tour performance” and “tour iron” mean.

    Yours appreciatively,

    Mark B.

  11. Kansaslefty

    Aug 7, 2019 at 12:25 am

    No thanks

  12. Spyy

    Aug 6, 2019 at 11:03 pm

    One ugly set of irons, a huge glob stuck in cavity’s…….pitiful loony

  13. Chuckies In love

    Aug 6, 2019 at 10:41 pm

    Oh look!! Fashion irons, the penny loafer and tie bar on a stick!

  14. Brent

    Aug 6, 2019 at 10:38 pm

    I’d be interested in AP1 irons this fall, but not the new T300s. Ryan, any idea if both sets will be available for custom orders for a few more months, or only the new irons?

  15. DJ

    Aug 6, 2019 at 8:54 pm

    I want the T300 11* one iron

  16. dat

    Aug 6, 2019 at 8:47 pm

    Hideous

  17. Curt

    Aug 6, 2019 at 8:29 pm

    Cool clubs. To much technology. Should be banned on tour. I’ll never understand why pros are so spoiled. Be like the MLB finally allowing metal bats. Just making the sport easier and easier every day. Personally do not believe modern pros are any better and every record breaker needs an asterisk *****.

  18. Scott

    Aug 6, 2019 at 5:57 pm

    Mizuno MP 20 release is 9/5

  19. Cc Shop

    Aug 6, 2019 at 5:04 pm

    Much better look in person. Plus I couldn’t argue with results. Current 718 Ap2 are two degrees strong loft and I was getting nearly identical distance and spin numbers out of the T100 at its stock loft. If your an AP2 player give the New CB a strong look. A little higher spin for me but feel and forgiveness was outstanding.

  20. JCGolf

    Aug 6, 2019 at 2:15 pm

    Changing descent angle from 43 degrees to 45 degrees is a 4.6% difference. Not a 2% difference.

  21. BettiBoop

    Aug 6, 2019 at 1:50 pm

    Those have to be the ugliest irons I’ve seen in a long time. All of them are just plain ugly.

  22. duke

    Aug 6, 2019 at 11:39 am

    Beautiful clubs and T100 for me. Wow 43* PW. OEM’s are on a “pw loft” competition.

Leave a Reply

Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Whats in the Bag

Patrick Reed WITB 2021 (July)

Published

on

Patrick Reed what’s in the bag accurate as of The Olympics. 

Driver: Titleist TSi3 (9 degrees)
Shaft: Aldila Rogue Silver 125 MSI 70 TX

(Photo via Sports Marketing Surveys)

3-wood: TaylorMade SIM (15 degrees)
Shaft: Aldila Rogue Black 130 MSI 80 TX

Hybrid: Callaway Apex Pro (20 degrees)
Shaft: UST Mamiya Recoil Prototype 95

Irons: Grindworks PR-202 (4) Grindworks PR-101A (5-PW)
Shafts:  True Temper Dynamic Gold Tour Issue X100

Wedges: Artisan Proto (51), Vokey SM8 (56-08M), Vokey WedgeWorks Proto (60)
Shafts: True Temper Dynamic Gold Tour Issue S400

(Photo via Sports Marketing Surveys)

Putter: Odyssey White Hot Pro 3

Ball: Titleist Pro V1

Featured image via @sms_on_tour

Your Reaction?
  • 0
  • LEGIT0
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK1

Continue Reading

Equipment

Titleist launches new U505 utility and T200 long irons

Published

on

Titleist has introduced its new U505 utility and T200 long irons, which are available for fittings today and will hit retail on August 26.

The new U505 utility irons and T200 long irons from Titleist will offer players seven new opportunities for golfers looking to increase launch and spin from their utility and long irons, including four options in the new U505 model and three irons from the new T200 family.

Note: This is the tour U505. The retail version doesn’t have the hotmelt port.

“The new U•505 is the direct result of tour player feedback of the originalU•500 and U•510utility irons. The U•505 combines the best of both, and the result is our highest performing and most playable utility iron yet. The new T200 long irons offer similar high launch and speed with the look and feel of an iron set at the top of the bag.” – Josh Talge, Vice President, Titleist Golf Club Marketing

2021 Titleist U•505 utility: ‘The Players Utility Irons’

The new U•505 utility iron from Titleist is a wide-soled, high-launching club designed for the player looking to increase launch and speed from their long irons with a faster face.

With a thinner forged L-Face and the infusion of Max Impact Technology (Max Impact 2.0), the U•505 is Titleist’s highest COR utility iron ever.

The club features a new reconfigured hollow body, core support structure, and enhanced high resilience polymer core in design to ensure that dynamic speed generation now comes with a superior feel and sound.

Utilizing Denser D18 tungsten weights and a brazing process used in aerospace construction, Titleist engineers could concentrate weight more efficiently and be even more precise with CG placement. In the U•505 utility iron, that meant sliding it lower and towards the heel, where according to the company, tour pros and better players felt it improved launch dynamics the most.

The U•505 was designed with a shorter blade and shallow face but kept the wide sole to maintain all of the performance advantages of its predecessors while moving towards a look that feels more in line with an irons set.

Specs & Pricing

The new Titleist U•505 utility irons are priced at $249 (HZRDUS shaft) per club.

2021 Titleist T200 long irons: ‘Performance and Technology’

The new T200 long irons are designed for the better player looking for long irons to increase launch and speed at the top of their bag.

The improved Max Impact Technology in the new long irons from Titleist includes a core support design and an enhanced high resilience polymer core designed to improve both off-center speed and mass efficiency at impact across a forged, high COR SUP-10 L-Face Insert.

An engineered muscle plate contributes to precision sound tuning and saves weight which is optimized in a streamlined 17-4 chassis.

The retail version doesn’t have the hotmelt port.

The T200 long irons also feature a shorter blade length, less offset (same as the new T100), narrower topline and thinner sole. The combination of all of this is in design to provide long irons with a tour-inspired look and feel while delivering maximum speed and distance.

In addition, the long irons utilize denser D18 tungsten weights, which seek to provide greater mass efficiency, while also allowing Titleist engineers to position the CG more precisely in design for faster, more forgiving, and higher launching long irons.

Specs & Pricing

The new Titleist T200 long irons are priced at $249 (Project X HZRDUS shaft).

Your Reaction?
  • 2
  • LEGIT0
  • WOW0
  • LOL0
  • IDHT1
  • FLOP0
  • OB0
  • SHANK2

Continue Reading

Equipment

Titleist introduces next-generation T-Series irons

Published

on

After much anticipation since tour seeding started in June, Titleist has introduced its latest iteration of the T100 iron with four models: 2021 T100, T100S, T200, and T300, coming to retail on August 26.

The new T-Series iron family features new materials, processes, and refinements designed to provide exacting precision, performance, and unmatched feel, with a model for every golfer’s needs, according to the company. 

“The new T-Series irons represent another step forward in Titleist iron design and technology. With these new irons, across the board, every detail matters. They provide the best precision and performance in their respective iron category with stunning aesthetics and feel. Golfers don’t buy an iron ‘line’, they want specialization, and that’s what each of these models offer.” – Josh Talge, Vice President, Titleist Golf Club Marketing

2021 Titleist T100 iron: ‘The Modern Tour Iron’

The “player’s iron” of the new family, the T100 iron features an all-new Tour-designed sole, which was inspired by discussions with both the tour staff and the Vokey wedge design team. It features a new variable bounce sole design, which provides less bounce in the heel and more bounce in the toe to facilitate better turf interaction and improved feel.

The new T100 face features a continuous cradle construction that aims to provide a seamless striking surface and a more uniform leading edge than its predecessor.

A fully forged, dual cavity supports the face construction, and the faces on the 3-7 irons have been redesigned to impart slightly more spin for improved shot-shaping and increased control. The 8-PW are forged with one-piece 1025 carbon steel.

In addition, by utilizing a denser version of tungsten (D18) weights in the heel and toe of the 3-7 irons for greater mass efficiency and a brazing process used in aerospace construction, Titleist engineers were able to eliminate weld points and be even more precise with CG placement to produce the highest MOI in a “players iron.’

Jordan Spieth put the new T100 irons (4-9) in his bag earlier this month at The Open Championship, and speaking on the new clubs said

“The sole just glides through the ground so nicely. With the added bounce off the toe and the reduced bounce in the heel similar to the wedges that we have on those grinds, it just allows for some consistency when you get a little bit off. The idea that you can be on uneven lies and have it kind of make up for that, and then if you get in the rough and have it not drag as much, but instead slide through just as easily, that’s where we see the improvement in these irons.”

Jessica Korda is another high profile player to put the T100 irons (5-9) into play recently as well as a T200 4-iron, and said on the new irons from Titleist:

“They’re just really pure. It’s like I’m hitting blades, but you’re not. I loved how solid they felt. The height on them is incredible. It’s exactly what I’m looking for, especially in the longer irons.

“The consistency is what I look for. Because when I’m standing over the ball and I need this thing to travel a number that I have in my head, and I can rely on that and just be like, just make a good swing, it takes so much of the guesswork out of it and it makes you commit to the shot more. I don’t change often. It has to beat what I have, and this is really nice. To be even better, to help me hold greens like I need to with the longer irons, especially going into par fives, it’s really, really nice.”

Specs & Pricing

The new Titleist T100 irons are priced at $186 per club and $1,299 per 7-piece set (steel).

2021 Titleist T100S irons: ‘The Faster Tour Iron’

Aimed at players who want the feel of a tour iron but who want added distance, the new T100S head dimensions exactly match the specs of the T100, except for being engineered – not bent – two degrees stronger.

The iron also features the same fully forged face, backed by an innovative Muscle Channel designed to add both speed and launch. 

Like the T100, the new T100S face features a continuous cradle construction designed to create a seamless striking surface and a more uniform leading edge.

A fully forged, dual cavity supports the face construction, with the 3-7 iron faces redesigned to impart slightly more spin for improved shot-shaping and increased control, while the 8-W are forged with one-piece 1025 carbon steel.

In addition, utilizing denser D18 tungsten weights and a brazing process used in aerospace construction, the T100S irons feature the exact precise CG calibration as the T100 irons.

Weight savings from the Muscle Channel are shifted to produce even lower CG and higher launch, resulting in improved MOI and increased ball speed from a solid, fully forged design.

“The uniqueness of the T100•S comes from the fact that we engineered the 2* stronger loft into the iron rather than just bend them. The reason for this is to keep the integrity of the sole and optimize its performance through the turf. That would be lost by simply bending a T100.

“In addition, the ‘S’ represents ‘speed’ and the new Muscle Channel delivers it through the long and mid irons by providing longer distance, tighter dispersion and higher angle of descent for greater consistency and scoring opportunities. It has the same look and feel of the T100 but longer flight for those who want it.” – Marni Ines, Director, Titleist Irons Development, Golf Club R&D

Specs & Pricing

The new Titleist T100S irons are priced at $186 per club and $1,299 per 7-piece set (steel).

2021 Titleist T200 irons: ‘The Tour’s Distance Iron’

The retail T200 doesn’t have the hotmelt port pictured on the tour version.

With 10 different patents utilized, Titleist is calling its new T200 iron its most advanced iron ever.

The improved Max Impact Technology (Max Impact 2.0) in the T200 iron now includes a core support design and an enhanced high resilience polymer core designed to improve both off-center speed and mass efficiency at impact across a forged, high COR SUP-10 L-Face Insert.

An engineered muscle plate seeks to contribute to precision sound tuning and saves weight, which is optimized in the new, streamlined 17-4 chassis.

A shorter blade length, less offset (same as T100), narrower topline and thinner sole provides a tour-inspired look and feel while still aiming to provide maximum speed and distance.

As with the other clubs in the T-series family, Titleist utilized denser D18 tungsten weights in the 3-7 irons of the T200 irons for greater mass efficiency and a brazing process used in aerospace construction allowed engineers to position the CG more precisely for maximum benefit in every club.

“Many golfers want the benefit of advanced technology in an iron –and the T200 is our most advanced iron yet – but they don’t necessarily want to see it. All of that ‘Max Impact’ technology-and more-is now ‘under the hood’ in the new T200, so it looks and feels like a Tour-played iron but has the game improvement qualities preferred or required by this golfer.

“With the evolution of Max Impact, we were able to include an Engineered Muscle Plate that allowed us to free up weight and add lightweight polymer and over 100g of high-density tungsten to the design. The result was extremely high MOI properties at Tour inspired blade lengths which allows the iron face to return more energy to the golf ball on off center shots and produce tighter dispersion and more consistent distance.” – Marni Ines, Director, Titleist Irons Development, Golf Club R&D

Specs & Pricing

The new Titleist T200 irons are priced at $186 per club and $1,299 per 7-piece set (steel).

2021 Titleist T300 irons: ‘The Ultimate Game Improvement Iron’

Aimed at those seeking high launch along with long-distance and forgiveness, the new T300 iron features Max Impact technology which seeks to maximize speed across a new variable face thickness (VFT) design.

The Max Impact 2.0 technology in the T300 irons is hidden under the badge. A cantilever core support structure features a new high resilience polymer core in design to deliver maximum speed and distance control.

The T300 now employs a High COR Variable Face Design that is thinner towards the heel in the long and mid irons to improve performance at what is traditionally one of the least effective strike points.

The high-density tungsten (D18) weights are utilized in the heel and toe of the 4-7 irons for greater mass efficiency. In addition, Titleist engineers were able to add 40 percent more tungsten than was in the previous generation T300 through a brazing process applied from aerospace construction usually reserved for Tour-played irons.

The size and shape of the T300 is designed to provide confidence, while a new chrome-plated finish offers a premium look.

“The T300 is the ultimate Titleist game improvement iron. It is for the golfer who wants high launch, long distance and forgiveness, and wants to see the technology they are using. This model utilizes the Max Impact 2.0 technology which is featured in a sleek, clean package at addres sfor which Titleist irons are known.

The design team retained the offset, shape and size, but was able to add 40 percent more tungsten to this iron, precisely lower the CG and meet the performance needs of this golfer.” – Josh Talge, Vice President, Titleist Golf Club Marketing

Specs & Pricing

The new Titleist T200 irons are priced at $143 per club and $999 per 7-piece set (steel).

Related forum threads

Your Reaction?
  • 25
  • LEGIT2
  • WOW1
  • LOL2
  • IDHT0
  • FLOP0
  • OB0
  • SHANK1

Continue Reading

WITB

Facebook

Trending