Connect with us

Equipment

TaylorMade Expands Forged Iron Offerings With P-730, P-790

Published

on

“Like a surgeon’s scalpel.”

That’s how TaylorMade’s Senior Director of Irons, Tomo Bystedt, describes the company’s new P-730 irons, which he and his team designed to meet the needs of three of the top-ranked golfers in the world: Rory McIlroy, Justin Rose, and Dustin Johnson.

Dustin Johnson has been testing Taylormade's P730 irons.

Dustin Johnson has been testing Taylormade’s P-730 irons.

“It’s pretty simple,” Bystedt says. “These guys have incredibly sensitive hands. When [Dustin Johnson] wants to hit a 5-yard cut into a right pin, you don’t see him doing anything differently. He just does it. What these players need is a very low-inertia club that they can [manipulate] easily, almost like a surgeon’s scalpel.”

Discussion: See what GolfWRXers are saying about the P-730 irons

Give average golfers a set of musclebacks like the P-730, and their results probably won’t be surgical. More than likely, they’ll butcher their scorecard. That’s where TaylorMade’s new P-790 irons come in. They aim to merge the classic look and feel of muscleback irons with the boost in distance and forgiveness that’s possible from the latest technologies.

TaylorMade_P790_Face

The P-790 irons debut a new construction from TaylorMade, using 4140 steel club faces that are forged into an L-shape. The club faces wrap around the sole of the irons, where they’re welded to iron bodies made of 8630 steel. The design allowed TaylorMade engineers to make the leading edge of the irons thinner and more consistent, according to Bystedt, which helps improve the distance and consistency of the irons.

What’s most intriguing about the P-790 irons, however, is what golfer can’t see. There’s a screw on the toe of each iron, which is an access port to the inside of the club. Through it, TaylorMade fills each P-790 iron with a lightweight, flexible material it calls “Speed Foam.” The Speed Foam serves two purposes, the first of which is providing support to the club face so that TaylorMade designers could make it thinner to improve the distance and forgiveness of the irons. The filler also helps absorb vibrations during impact, which creates a more desirable feel.

TaylorMade_P790_Address

In the two years TaylorMade spent developing the P-790 irons, it tested several filler materials, one of which was thermoplastic elastomer (TPE), the material PXG uses to fill the inside of its 0311 irons. “The problem with the TPE is that it completely kills your COR,” Bystedt says.

256286-P790-17_Exploded Club V3-a7a2ec-original-1503332771

COR, or coefficient of restitution, is the measure of spring-like effect of a golf club. The higher the number, the faster a golf ball rebounds off the club face. To keep the COR of the P-790 irons as high as possible, TaylorMade’s iron design developed Speed Foam. Think of it like EVA, or ethylene vinyl acetate, the cushioning material used in running shoe, Bystedt says. Then think of something “much softer and less dense than that.”

TaylorMade_P790_Back

There is a place for density in the P-790 irons, and it comes in the way of tungsten weights that are positioned inside the irons, which weigh as much as 11 grams. They’re positioned uniquely in each iron to create a center of gravity (CG) that’s directly in the center of the club face.

Compared to TaylorMade’s PSi irons, which the P-790 irons replace, Bystedt calls the shaping “more angular.” They also have a “slightly flatter sole.” “It’s clearly a players iron,” Bystedt says. “We’re not targeting this for the 0-5 guy, but we’re confident that the guy who’s a 10-handicap, avid golfer, is going to be able to play this.”

TaylorMade_P790_Sole

The P-790’s L-shaped club faces are welded to the bodies the irons at their “Speed Pocket,” a slot on the sole that increases face flexion for more distance and consistency.

The P-790 irons will sell for $1299.99 with steel shafts, $1499.99 with graphite shafts for an eight-piece set. They’re available in 3-PW, AW. The stock steel shaft is True Temper’s Dynamic Gold 105. The stock graphite shaft is a new model from UST Mamiya, the company’s 760/780 ES SmacWrap. They’ll be in stores Sept. 15.

The P-730 irons ($1399.99 for an eight-piece set) are available in 3-PW on Nov. 1. The stock shaft is True Temper’s Dynamic Gold S300.

Discussion: See what GolfWRXers are saying about the P-790 irons in our forum.

Your Reaction?
  • 316
  • LEGIT33
  • WOW26
  • LOL12
  • IDHT2
  • FLOP6
  • OB7
  • SHANK67

44 Comments

44 Comments

  1. Fredo

    Sep 12, 2017 at 10:37 pm

    Breaking News… PXG just filed a lawsuit against Taylormade and the distributors for patent infringement. Better buy em quick, haha.

  2. AV

    Aug 31, 2017 at 12:19 am

    TM call the 790 “forged construction” on their website:
    Wonder how much is actually forged in the overall construction of the clubhead.
    Sounds ambiguous and even misleading to me.

    • AV

      Aug 31, 2017 at 12:20 am

    • Golf Engineer

      Sep 26, 2017 at 11:11 am

      Can anybody tell us if the P-790 is ‘fully’ forged back and face, or, is it ‘co-forged’ with a cast steel back and a thin roll forged face plate welded to the steel back? There seems to be some contradictory reporting on this issue, like here:
      —————————
      It’s not quite all forged though, as the wrap around face is forged from 4140 Carbon Steel and then welded onto a cast 8620 carbon steel body. Therefore the bit you hit the ball with is forged, so you have that feel….”
      http://www.golfalot.com/equipment-reviews/taylormade-p790-irons-review-3888.aspx
      ——————–
      “The key to the P790 performance is a hollow, cavity-free construction that features forged 8620 carbon steel in the body and forged 4140 carbon steel in the clubface.
      http://www.golf.com/equipment/2017/08/22/first-look-taylormade-p790-forged-irons
      ———————
      From what I see of the exploded internal view of the P790, the body looks too complex to be a forging. So who is right? Golfalot.com or Golf.com.?
      GolfWRX Staff must investigate and inform us…. fully forged or co-forged? Ask TM because putting the word “forged” on a cast hosel may be disingenuous.

  3. Realist

    Aug 26, 2017 at 10:08 am

    I’ll pick these up on the Bay in about 3 weeks for $200.

  4. JR

    Aug 25, 2017 at 12:03 pm

    Buttocks!

  5. Derrick

    Aug 25, 2017 at 12:25 am

    The Magic of Tungsten and TPE jello inside the hollow heads makes impact sweeeet. I love the new technology from the technologically advanced OEMs.

  6. Tippy Canoe

    Aug 24, 2017 at 11:33 am

    Cool, I was wondering when the R9 irons were going to come back. All you have to do with the big boys, is research what they did 10-15 years ago. Nothing is new…buy some lessons people! Titleist is also on the move towards Gimmick Land now that went public, but still the best bang for your disposable bucks!

  7. Allan

    Aug 24, 2017 at 1:05 am

    P-790 —- Hollow body, foam injected, tungsten toe weight, forged face. This is not a golf club, it’s a sucker club for incompetent wannabe golfers.

  8. MAGA

    Aug 23, 2017 at 2:02 pm

    Fake forged

    • Bert

      Aug 28, 2017 at 7:47 pm

      Agree +1 guess the definition of a forged club is ambiguous at best.

  9. Chris

    Aug 23, 2017 at 8:43 am

    Epon 502s with the Inner Gel comes to mind.

  10. Rich Douglas

    Aug 22, 2017 at 9:16 pm

    Where’s the SL version? Oh, right. Pass.

  11. rex235

    Aug 22, 2017 at 7:05 pm

    The Taylor Made P-790 model is this generations Beauwood PSS (perfect sweet spot) iron model, with
    adjustable weighting and urethane reinforced interiors. Made in the early ’80s.

    The Taylor Made P-730 in the latest refinement of the Mizuno MS-9/MP-11 iron models. Offered in late ’80s, early ’90s by Mizuno.

    You should be able to compare these designs with these “new” iron models from TaylorMade.

    Neither Beauwood nor Mizuno offered these iron models LH, so even though it is 2017, and these designs have been around for a while, both appear to be new versions of the RH Only theme.
    Because… “tiny.”

    • Heich

      Aug 22, 2017 at 8:38 pm

      Another new ID, Obs? Why can’t you just stay away and take your pills

  12. Phil

    Aug 22, 2017 at 5:19 pm

    Mizuno > Taylormade

  13. FyearoldGolfer

    Aug 22, 2017 at 2:49 pm

    My local Pro is a Taylormade Rep, I’ll ask him what his fitted price is on a new set of clubs. Thinking $1100 for the P730’s. Oh, don’t forget our “new” 10% sales tax rate.

  14. Engineer Jim

    Aug 22, 2017 at 1:57 pm

    Only the face of the P-790 is forged. The body is a complex casting if you look at the blow-up picture of the head internals. You could never forge a complex body like that. TM have ‘forged’ on the hosel but that’s only marketing deception.

    • BV

      Aug 22, 2017 at 4:13 pm

      Ya they are ‘forged’ like in ‘fake’.

    • rex235

      Aug 23, 2017 at 12:42 am

      I agree, the P790 body is cast steel and the thin face is forged. Why they put ‘forged’ on the cast hosel is puzzling but it’s wrong and deceptive. TM should just fess up and admit as much.

  15. Dat

    Aug 22, 2017 at 12:22 pm

    The P-790 irons will sell for $1299.99 with steel shafts, $1499.99 with graphite shafts for an eight-piece set. They’re available in 3-PW, AW. The stock steel shaft is True Temper’s Dynamic Gold 105. The stock graphite shaft is a new model from UST Mamiya, the company’s 760/780 ES SmacWrap.

    The P-730 irons ($1399.99 for an eight-piece set) are available in 3-PW on Nov. 1. The stock shaft is True Temper’s Dynamic Gold S300.

    Is there going to be a reasonably priced set?

  16. The Dude

    Aug 22, 2017 at 11:08 am

    In an effort to clean up the club….2 why use 730’s…just use 7.

  17. CCGolfTx

    Aug 22, 2017 at 10:23 am

    These clubs actually intrigue me. Seems like they out. Lot of thought into the construction but did not Callaway us on the price.

  18. Shanklampard147

    Aug 22, 2017 at 10:02 am

    I call on all lefties to boycott taylormade. No 730’s in left hand is a joke. I was going to get the new m1 woods but now I can’t give them my money and still look at myself in the mirror. As sad as it is, I might have to go to pxg. They are the only company that makes every club available to lefties.

    • Ummmm

      Aug 22, 2017 at 10:53 am

      Easy to be able to afford the production of lh irons when you overcharge like PXG does

      Boycott them? They can’t make everything for your side of the ball, it’s not fiscally responsible. If you owned a golf club company and wanted to make a ton of high end LH stuff you wouldn’t be in business long.

      • Shanklampard147

        Aug 22, 2017 at 2:06 pm

        It’s easy though, all they need to do it a little research. How many bad left handed golfers do you see? In Minnesota it’s rare. On the other hand, the majority of right handed golfers are hacks, so they can play the big clunky irons. Blades and small cb’s for lefties, clunky cast giants for you righties.

      • LeftyBlades

        Aug 22, 2017 at 6:00 pm

        PING…every club RH or LH, and never a doubt about product quality or performance.

    • Heich

      Aug 22, 2017 at 11:28 am

      You can go to Callaway, Shank. And have a nice day.

    • gioreeko

      Aug 22, 2017 at 1:11 pm

      Just play righty. I can swing lefty almost as well as I do righty. Practice, or quit whining.

      • Shanklampard147

        Aug 22, 2017 at 2:00 pm

        Serious question, Is producing enough drivers and woods for every citizen of the world fiscally responsible? There are more taylormade drivers in PGA superstores than there are golfers in this country.

        • Heich

          Aug 22, 2017 at 3:41 pm

          Lets not exaggerate, shall we, Shankpard?

          • Shanklampard147

            Aug 22, 2017 at 4:36 pm

            I apologize, that was for the guys telling me to learn to play right handed. That wasn’t directed at you.

      • Shanklampard147

        Aug 22, 2017 at 4:33 pm

        Good response, moron. That would be like me telling you to stop liking guys. We are all born how we are born.

    • Mike

      Aug 22, 2017 at 4:10 pm

      Learn to play right handed.. problem solved.

  19. Chuck

    Aug 22, 2017 at 9:49 am

    “Speed Foam” LOL is that like Flubber?

    • birdy

      Aug 22, 2017 at 11:43 am

      lol +1

      i think TM technology and engineering department is top notch.

      their marketing department needs revamped. the silly names are dumbing down their products

      • BV

        Aug 22, 2017 at 4:18 pm

        How about “Fast Foam” or “Shave Foam” — like shaving strokes off your game.

  20. Hcho

    Aug 22, 2017 at 9:47 am

    but where is the 2 iron UDI :(((

    • BV

      Aug 22, 2017 at 4:21 pm

      Since a 4i is really a 2i, a 2i would be a zero-iron.. or a -1i.

      • Hcho

        Aug 22, 2017 at 5:05 pm

        Lol I didnt check the lofts till you commented… that 19 degree 3 iron will do fine with a tour ad shaft

  21. DumbledoreBigD420

    Aug 22, 2017 at 9:39 am

    First!!!!

Leave a Reply

Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Equipment

Did Rory McIlroy inspire Shane Lowry’s putter switch?

Published

on

Editor’s note: This is an excerpt from a piece our Andrew Tursky originally wrote for PGATour.com’s Equipment Report. Head over there for the full article.

The timing of Lowry’s putter changeup was curious: Was he just using a Spider putter because he was paired with McIlroy, who’s been using a Spider Tour X head throughout 2024? Was Lowry just being festive because it’s the Zurich Classic, and he wanted to match his teammate? Did McIlroy let Lowry try his putter, and he liked it so much he actually switched into it?

Well, as it turns out, McIlroy’s only influence was inspiring Lowry to make more putts.

When asked if McIlroy had an influence on the putter switch, Lowry had this to say: “No, it’s actually a different putter than what he uses. Maybe there was more pressure there because I needed to hole some more putts if we wanted to win,” he said with a laugh.

To Lowry’s point, McIlroy plays the Tour X model, whereas Lowry switched into the Tour Z model, which has a sleeker shape in comparison, and the two sole weights of the club are more towards the face.

Lowry’s Spider Tour Z has a white True Path Alignment channel on the crown of his putter, which is reminiscent of Lowry’s former 2-ball designs, thus helping to provide a comfort factor despite the departure from his norm. Instead of a double-bend hosel, which Lowry used in his 2-ball putters, his new Spider Tour Z is designed with a short slant neck.

“I’ve been struggling on the greens, and I just needed something with a fresh look,” Lowry told GolfWRX.com on Wednesday at the 2024 Wells Fargo Championship. “It has a different neck on it, as well, so it moves a bit differently, but it’s similar. It has a white line on the back of it [like my 2-ball], and it’s a mallet style. So it’s not too drastic of a change.

“I just picked it up on the putting green and I liked the look of it, so I was like, ‘Let’s give it a go.’”

Read the rest of the piece over at PGATour.com.

Your Reaction?
  • 0
  • LEGIT0
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

Equipment

Webb Simpson equipment Q&A: Titleist’s new 2-wood, 680 blade irons, and switching to a broomstick Jailbird

Published

on

With seven career wins on the PGA Tour, including a U.S. Open victory, Webb Simpson is a certified veteran on the course. But he’s also a certified veteran in the equipment world, too. He’s a gearhead who truly knows his stuff, and he’s even worked closely with Titleist on making his own custom 682.WS irons.

On Wednesday at the 2024 Wells Fargo Championship, I caught up with Simpson to hear about his experience with Titleist’s new prototype 2-wood, how Titleist’s 680 Forged irons from 2003 ended up back in his bag, and why he’s switching into an Odyssey Ai-One Jailbird Cruiser broomstick putter this week for the first time.

Click here to read our full story about Simpson’s putter switch on PGATOUR.com’s Equipment Report, or continue reading below for my full Q&A with Simpson at Quail Hollow Club on Wednesday.

See Webb Simpson’s full WITB from the 2024 Wells Fargo Championship here

GolfWRX: It seems like you’ve been a little all over the place with your irons in the past six months or so, and now going back to the 680’s. Is that just a comfort thing? What’s been going on with the irons?

Webb Simpson: Titleist has been so great at working with me, and R&D, on trying to get an iron that kind of modernizes the 680. And so the 682.WS took the T100 grooves, but kinda took the look and the bulk and the build of the 680’s into one club. They’re beautiful, and awesome looking. I just never hit them that well for a consistent period of time. It was probably me, but then I went to T100’s and loved them. I loved the spin, the trajectory, the yardage, but again, I never went on good runs. Going through the ground, I couldn’t feel the club as well as with the blade. So last week, I’m like, ‘Alright. I’m gonna go back more for…comfort, and see if I can get on a nice little run of ball striking.’

So that’s why I went back.

 

View this post on Instagram

 

A post shared by GolfWRX (@golfwrx)

OK, that makes sense. I know you had done some 2-wood testing recently. Is that in the bag right now?

It’s like day-by-day. I used it at Hilton Head every day. Valero, I used it one round. And this week, me and my caddie will do the book every morning, and if it’s a day where we think we need it, we’ll just put it in and take the 3-wood out. I love it because it’s a super simple swap. Like, it doesn’t really change much.

Yeah, can you tell me about that club? I mean, we don’t really know anything about it yet. You know? I haven’t hit it or anything, obviously.

It has grooves like a 3-wood. Spin is perfect. And it’s honestly, like, everything is in the middle of a 3-wood and driver number. Trajectory, spin, carry, all of it. So, a Hilton Head golf course is almost too easy to talk about because, you know, there, so many holes are driver 3-wood.

Valero, our thinking was we had two par-5’s into the wind, and we knew that it would take two great shots to get there in two. So instead of hitting driver-driver, we just put it in. And I used it on those holes.

Hilton was a little easier because it was off-the-tee kind of questions. But Colonial will be a golf course where, you know, there’s a lot of driver or 3-woods. It’s kind of like a backup putter or driver for me now. I’ll bring it to every tournament.

So it’s, like, in your locker right now, probably?

Well, it would be. It’s in my house [because Webb lives near by Quail Hollow Club, and is a member at the course.] It’s in the garage.

Oh, yeah, that’s right. Do you know what holes you might use it out here if it goes in play? 

Potentially 15, depending on the wind. Second shot on 10. Could be 14 off the tee. The chances here are pretty low (that he’ll use the 2-wood). But, like, Greensboro would be an awesome club all day. I’m trying to think of any other golf courses.

There’s plenty that it’ll be a nice weapon to have.

It’s interesting, the wave of 2-woods and mini drivers. Like, it’s just really taken off on Tour, and all the companies have seemed to embrace it.

Yeah. The thing I had to learn, it took me, like, at least a week to learn about it is you gotta tee it up lower than you think. I kept teeing it up too high. You need it low, like barely higher than a 3-wood. And that was where I got optimal spin and carry. If you tee it up too high, you just don’t get as much spin and lose distance, I don’t know if that’s just a mini driver thing.

And you obviously have a Jailbird putter this week. What spurred that on?

Inconsistent putting. I’m stubborn in a lot of ways when it comes to my equipment, but I have to be open minded – I just hadn’t putted consistently well in a while. And I’m like, ‘Man, I feel my ball-striking coming along. Like I feel better; for real, better.’

If I can just get something in my hands that I’m consistent with. Being on Tour, you see it every year, guys get on little runs. I can put together four to five tournaments where I’m all the sudden back in the majors, or in the FedExCup Playoffs. You can turn things around quick out here. I’m like, ‘Man, whatever’s going to get me there, great.’

My caddie, David Cook, caddied for Akshay at the Houston Open and he putted beautifully. Then, I watched Akshay on TV at Valero, and he putted beautifully. And, I’m like, ‘I’m just going to try it.’

I’ve never tried it for more than a putt or two, and I just ordered what Akshay uses. It was pretty awkward at first, but the more I used it, the more I’m like, ‘Man, it’s pretty easy.’ And a buddy of mine who’s a rep out here, John Tyler Griffin, he helped me with some setup stuff. And he said at Hilton Head, he wasn’t putting well, then tried it, and now he makes everything. He was very confident. So I’m like, ‘Alright, I’ll try it.’”

And you’re going with it this week?

Hundred percent.

Alright, I love it. Thank you, I always love talking gear with you. Play well this week. 

Thanks, man.

See Webb Simpson’s full WITB from the 2024 Wells Fargo Championship here

Your Reaction?
  • 19
  • LEGIT1
  • WOW1
  • LOL1
  • IDHT0
  • FLOP0
  • OB0
  • SHANK1

Continue Reading

Product Reviews

GolfWRX member testing: L.A.B. Golf DF3 putters

Published

on

Like L.A.B. Golf’s larger DF 2.1 putter, the new DF3 is “fully automatic.” That means golfers will get the full experience of DF3 wanting to guide itself on the correct path on the way back and through. This is possible thanks to L.A.B. Golf’s patented Lie Angle Balance technology. The technology creates true zero-torque putters that stay square by themselves. Golfers can trust that L.A.B. Golf putters will return to square without any need for manipulation.

How we choose our testers

GolfWRX staff evaluates each entry against the criteria laid out in the testing thread to determine the best fit for each specific product — For example, if a game-improvement iron is being tested, game-improvement iron-playing golfers will be considered.

Overall tester feedback

Overall, our testers were impressed with the ease and precision of the remote-fitting process with its custom options. On the whole, even those skeptical about the DF3’s shape enjoyed the ease of alignment and consistent delivery of putter to ball, with some testers pointing to an initial “adjustment period.” Those who had played previous L.A.B. creations universally praised the improved feel of the DF3.

What our members said

@jasman29

“I try to take a lighter grip typically when I putt or at least when I am putting my best. I can do that for the most part BUT it is on the shorter putts lately where the grip gets a little tighter at times. The one thing I tried to focus on, after watching some videos Sam has putt online about how to putt with his putters, was to not feel pressure in my thumbs during the stroke and let the putter swing more freely. When you do this, this putter just wants to rock back and forth. Let the putter/tech do the work for you without your brain trying to telling to manipulate the face in any way. It was a different feeling not having that “torque” working against your hands in the feel of the stroke.”

@rooski

“At this point, I feel completely confident with this putter. I have never seen the ball roll this consistently end over end on my start line. It has made me realize that I definitely have a bit of work to do in the green reading department, but what’s really nice is that it never leaves me guessing. When I watch the ball start on my line and roll perfectly end over end, it is at least nice to be able to definitively say “oh I just misread that” while taking out almost every other variable.”

“Also for whatever reason people find the gimme getter so hilarious. It’s always just “oh cool that picks up balls?!”…Unless something wild happens this putter will be staying in the bag for the foreseeable future including the tournament schedule over the season, I’ve got almost nothing bad to say about it.”

@molecularman

“It’s everything I hoped it would be. I’m very happy I went with the heavier head option, I fear the standard weight would have felt a touch too light for my taste. So shout out to Calvin for being spot on there. At the current weight, I can have a light grip pressure and let gravity do the work. The head just feels incredibly stable and amazingly solid. Speaking of grip, I really debated what grip to go with and the Press Pistol seems like a great choice. The grip feels very versatile for different putting styles, maybe a bit less so for left hand low (imo). I’m mostly a “2 thumbs” guy but have gone back and forth with left hand low as well as claw. The grip tapers down to a smaller flat oval at the bottom. I didn’t love it for left hand low, but for a claw style grip it is really really good.”

@coreyhr

“This putter isn’t going to magically turn a poor putter in to Brad Faxon on the greens. But what I can say with confidence is that removing the excessive face rotation from the putter makes creating a repeatable, consistent stroke infinitely easier to obtain. If you’ve been wanting to try a LAB putter, this is the one truly worth taking the dive on in my opinion. Having never been completely blown away with the Mezz or DF 2.1, this putter has really changed my opinion. I’ve always been really intrigued by the technology, and completely buy in to the concept, but I’ve never been able to get past what I perceived to be less than stellar looks, sound and feel. LAB, in my opinion, has address and improved on all of those things. While this putter still looks far from conventional, it did not take long to get comfortable with the look or footprint. It’s not overly obnoxious in size and sets up so well behind the ball.”

@SEP1006

“As far as consistency, it’s ridiculous. You can hit these putters ANYWHERE on the face and the ball rolls end over end. And whether you hit it in the middle, on the toe, or on the heel. The balls roll pretty much the same distance, easily within 6″ of each other.”

“LAB really did a great job with the new smaller size as well. The DF 2 always felt like I was putting with a branding iron. The DF 3 is a perfect compact size and very easy to look down at.”

“The DF 2 I had was an armlock putter. So my only concern with the DF 3 was the grip. I have never been a hands pressed forward putter. It was recommended to me to go with the Press II 1.5* grip so I did. Went with the textured grip and it is perfect. I putt with the pencil grip and my hands are very comfortable.”

“As much as I love the roll that the PXG milled face putters (which I’ve been using for years) put on the ball the DF 3 is even better. Can’t believe I’m saying this but you will soon see my PXG putter on the BST.”

Member review themes

  • Ease of remote fitting process
  • Putter stability
  • Surprisingly good sound and feel
  • Ease of getting a putt on line
  • Ease of alignment

Check out the full review thread here.

More about GolfWRX member testing

Member testing gives our forum members the opportunity to put the latest golf equipment through the paces. In exchange for getting a product to test (and keep), forum members are expected to provide in-depth product feedback in the forums, along with photos, and engage with the questions of other forum members.

For brands, the GolfWRX member feedback and direct engagement is a vital window into the perceptions of avid golfers.

You can find additional testing opportunities in the GolfWRX forums.

 

Your Reaction?
  • 1
  • LEGIT0
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

WITB

Facebook

Trending