Connect with us

Equipment

Spotted: Ping G400 Driver

Published

on

Update: We captured in-hand photos of the Ping G400 driver at the U.S. Open at Erin Hills. We also captured photos of Ping’s new G400 Fairway Woods, Hybrids and Crossover, as well as Bubba’s custom G400 driver (see end of the story). 

A new driver from Ping, the G400, has landed on the USGA’s Conforming Club List and is on the range at the U.S. Open. As in previous Ping driver releases, the driver is listed on the USGA Conforming Club List in three different models:

  • G400: 9 and 10.5 degrees (RH and LH)
  • G400 LST: 8.5 and 10 degrees (RH and LH)
  • G400 SFT: 10 and 12 degrees (RH and LH)

In previous Ping launches, LST stood for “Low Spin Technology,” while SFT stood for “Straight Flight Technology.” Those two specialty driver models from Ping have served to meet the needs of a minority golfers who need to reduce spin (LST) or add additional draw bias (SFT) to their tee shots, while the standard model (G400) meets the needs of the majority.

USGA Photo: Ping G400 Driver

20170181

USGA Photo: Ping G400 LST Driver

Ping_G400_LST

USGA Photo: Ping G400 SFT Driver

Ping_G400_SFT

Ping isn’t commenting on the new drivers at this time, but it’s clear that the company has made several important changes compared to its current driver line, the Ping G.

Each of the three G400 drivers appear to have a tungsten weight on their soles, a design that was last seen in a Ping driver in its i25 driver. The addition of the weights to the back of the driver’s sole in previous models helped push weight lower and deeper in the club head, improving moment of inertia (MOI), a measure of forgiveness that’s predictive of a driver’s ability to retain ball speed on mishits.

It’s also clear from that photos that Ping will carry on its “Vortec” aerodynamics package on the back of the driver, which in the G drivers worked synergistically with the company’s Turbulators, or “speed humps,” on the driver crown that helped reduce drag to improve swing speed.

The G400 drivers also appear to use dimples on the back portion of their crowns, which are equipped with ribbed structures known in the G drivers as “Dragonfly Technology.” Ping says Dragonfly improves structural stability and enhances weighting properties for more distance. As in golf balls, dimples on golf clubs can be used to improve aerodynamics.

We also captured photos of a G400 driver that could be used by Bubba Watson this week at Erin Hills.

Related: See more photos of Ping’s G400 Drivers, Fairway Woods, Hybrids and Crossover in our forum. 

Your Reaction?
  • 510
  • LEGIT45
  • WOW46
  • LOL18
  • IDHT10
  • FLOP16
  • OB11
  • SHANK88

34 Comments

34 Comments

  1. Jose Pro Se

    Jun 22, 2017 at 12:19 am

    Ok Zak, Bubba is playing a practical joke on you.

    That’s pan dulce. Good one Bubba.

    I’m not buying the pink jaw breaker trick either.

  2. SoonerSlim

    Jun 20, 2017 at 2:23 pm

    I’ve always liked Ping clubs, but won’t be buying any new metal woods anytime soon. Clubhead is way too busy for me. I like an clean looking driver head. I seriously doubt that all that fancy technology makes that much difference in distance if you hit the middle of the clubface. Sorry Ping. If I buy one of your drivers, it will be a previous version with a clean looking clubhead.

  3. Orvill

    Jun 14, 2017 at 10:36 pm

    Pinky Pingy Pimpy

  4. Ill take the other

    Jun 13, 2017 at 9:36 pm

    PingXG 0811X!!!!!

  5. KCCO

    Jun 13, 2017 at 9:28 pm

    busy……i like the head cover;)

  6. BigBoy

    Jun 13, 2017 at 2:00 am

    If it comes with a blow off valve, I’ll buy it.

  7. CrashTestDummy

    Jun 12, 2017 at 7:08 pm

    It is really ugly but if it hits quality golf shots over and over again, then it doesn’t matter. Function over fashion.

  8. Anthony

    Jun 12, 2017 at 6:14 pm

    If you made that in your garage, you would be a very wealthy person….

  9. Deegee

    Jun 12, 2017 at 5:40 pm

    It will be 1/2 % faster, have better dragon flies, turbulence turbulators…and mugs will spend spend spend on a product that’s no friggin different to last year. These manufacturers are B.S.

  10. Old Putter

    Jun 12, 2017 at 5:35 pm

    I know this will never happen but….
    How bout a lie a lil flatter than 58*

  11. ooffa

    Jun 12, 2017 at 5:06 pm

    No, you are taking it the wrong way. I think you are great. I love your posts. It’s very rare to get to watch someone spiral downward so quickly. I wish i could help you get past this obvious tragic portion of your life. Unfortunately I cannot, so I am just observing your decline into delusion.

  12. Prut

    Jun 12, 2017 at 4:48 pm

    Are the turbulators bigger?

  13. The Dude

    Jun 12, 2017 at 4:48 pm

    let’s get some numbers…….with the Volvik please..

  14. Egor

    Jun 12, 2017 at 2:55 pm

    My TaylorMade rep and I spent the day sipping mimosas and laughing at how hard Ping is trying to play catch up to the best club manufacturer in the world. Wild clubhead graphics are so 2014. If Ping would just get with the times, they might have a small chance of getting close to the greatness that is TaylorMade.

    • Alec

      Jun 12, 2017 at 3:55 pm

      Ummmmmmmmmmm ok

    • Barry

      Jun 12, 2017 at 8:57 pm

      Yea so that’s a complete lie. Taylormade is not a great company… they screwed themselves by having such a short product release cycle and ruined their reputation with green grass facilities. I know many courses that don’t carry Taylormade because it is a waste of money on inventory when they know they will have to discount it to sell it. They make decent clubs but throw money at the tour pros to play it. That’s the only reason that they are so “popular”

    • Desmond

      Jun 12, 2017 at 11:16 pm

      I think you drank a few too many…

    • LC

      Jun 13, 2017 at 9:27 am

      Egor, for one you were “sipping” mimosas (lose credibility there)… I am not against TM but Ping is up TM’s you know what as far as technology goes.

    • Count Dracula

      Jun 13, 2017 at 11:11 am

      Well said, my humble servant

      • SlapMyForehead

        Jun 13, 2017 at 9:21 pm

        ….. LC, Desmond, Barry have drunk too many… of each other’s Koolaids. You guys would be a hoot at a party not.

    • Boyo

      Jul 14, 2017 at 12:44 pm

      TM hahahaahahhaaaaaaaaaaaaaaaaa
      How long till they go under?
      The biggest bunch of bullshirt artists out of all of them….

  15. SH

    Jun 12, 2017 at 2:29 pm

    Pretty soon somebody will bring out a driver with a cover that has the dimples from a golf ball. After all, we all know the ball is the most aerodynamically efficient design there is. Why tease us like this, Ping?

  16. xjohnx

    Jun 12, 2017 at 1:49 pm

    MOI is a measurement of the ability to resist twisting. Does it also have an effect on ball speeds or is that a mistake? Not calling you out, just asking.

    • Zak Kozuchowski

      Jun 12, 2017 at 2:30 pm

      Thanks for the question, xjohnx. Yes, there is a direct correlation between the amount of twisting and ball speed retention. The less twisting, generally, the more ball speed.

  17. Tom1

    Jun 12, 2017 at 1:20 pm

    awww the co0lor pink, it brings out the best in all of us……

  18. Phil

    Jun 12, 2017 at 1:06 pm

    Sweet Nike Vapor Flex 2017!

  19. LOLyoucantbereal

    Jun 12, 2017 at 12:33 pm

    I would like to think you are kidding, but there are people in life that do not get it, that is why others succeed.

  20. ND Hickman

    Jun 12, 2017 at 12:20 pm

    Now if they could sell the Bubba version at a reasonable price I’ll upgrade from my G30. Stick to pricing it higher than Callaway charge for the already ridiculous priced Epic’s then you’ve lost a sale.

  21. KC

    Jun 12, 2017 at 11:20 am

    That pink driver will look great in Bubba’s den as he watches the 3rd and 4th rounds of the US Open from home.

    • BMF

      Jun 13, 2017 at 8:08 am

      Belive it or not, i had a dream of bubba sending missiles all over the place after i read your comment. Even duffed afew shots. Lmao!

  22. drkviol801

    Jun 12, 2017 at 10:37 am

    Those turbulators are sick though

Leave a Reply

Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Whats in the Bag

Garrick Higgo’s winning WITB: 2021 Palmetto Championship

Published

on

Driver: Titleist TSi3 (9 degrees)
Shaft: Fujikura Ventus Blue 6 X

3-wood: Titleist TSi2 (15 degrees)
Shaft: Fujikura Ventus Blue  7 X

Hybrid: Titleist TSi3 (18 degrees)
Shaft: Fujikura Atmos HB Tour Spec Blue 8 X

Irons: Titleist T100 (4-PW)
Shafts: Project X 6.5

Wedges: Titleist Vokey Design SM8 (50-12F, 56-14F, 60-06K10S)
Shafts: True Temper Dynamic Gold Tour Issue S400

Putter: Scotty Cameron Phantom X 5.5

Ball: Titleist Pro V1x (2021)

Your Reaction?
  • 31
  • LEGIT5
  • WOW1
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK1

Continue Reading

Whats in the Bag

Chesson Hadley WITB 2021 (June)

Published

on

Driver: Titleist TSi3 (10.5 degrees)
Shaft: Mitsubishi Diamana D+ Limited 70 TX

3-wood: Titleist TS3 (16.5 degrees, B2 Setting)
Shaft: UST Elements Gold 8F5 X

bill-haas-witb-2020

Hybrid: Titleist TSi3 (20 degrees)

Irons: Titleist 620 MB (4-9)
Shaft: True Temper Dynamic Gold AMT White Tour Issue X100 (4-9)

Wedges: Vokey SM8 (48-10F, 52-12F, 56-14F, 60-08M)
Shafts: True Temper Dynamic Gold Tour Issue S400

Putter: Odyssey White Hot OG 2-Ball

Grips: Golf Pride MCC

Ball: Titleist Pro V1x

Your Reaction?
  • 6
  • LEGIT1
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

Equipment

SST Pure: A deep dive into the technology

Published

on

Due to the manufacturing process, all golf shafts contain irregularities in straightness, stiffness, and roundness. And depending on how a shaft is aligned, the inconsistencies can adversely affect a shaft’s performance and consistency.

SST PURE was developed as a solution to this problem.

In simplest terms, the SST PURE (stands for it stands for Plane of Uniform REpeatability) process finds a shaft’s most stable orientation to minimizing twisting and off-line bending during the swing. This results in longer, straighter ball flight and more consistent performance in all PUREd shafts. Subjectively, PUREd shafts are often described as feeling “softer” than their non-PUREd counterparts.

For more background on SST PURE and PUREing on tour, we talked with SST founder Dick Weiss, independent rep Scott Garrison, who has the only SST Pure machine on a tour truck, and rep Arnie Cunningham.

Here’s what they had to say.

SST founder Dick Weiss

GolfWRX: Give us a 101-level overview of SST PUREing.

DW: What we do at SST is we analyze the irregularities in a shaft and based on various algorithms, various mathematic formulas, determine which is most asymmetric. Which is the one that’s causing the shaft to bend and twist out of line at impact and also in the first load – the transition between backswing and downswing, there’s a lot of movement in there also. What we do is identify that and mark it so it can be assembled into the club head.

It’s a technological development. It’s come about because we have computers today to do this. We don’t do it by eyeball. The computer doesn’t care who’s going to play it, what level of skill they have, what the material composition is of a shaft, who made it, what kind of ball you’re going to hit. That’s not what we do. What we are saying is we want to analyze a shaft to get it to perform to the best of its ability. You can take a shaft based upon irregularities in it – because shafts are not round or straight.

If you take any shaft and roll it on a table like a pool cue, you’ll see 90% of the time they’ll bounce along because they’re not round. There’s high points and low points, thicker and thinner areas. All we want to do is locate that and say, “Let’s make it work as an asset, let’s make it work as a support for a shaft so they don’t torque out or twist out at impact.”

GolfWRX: Can you give us a brief overview of exactly what goes on in the SST PUREing process?

DW: Sure. In the PUREing process, there’s approximately fifty-six steps you have to take assuming you do what we call a retro-PURE. There’s two ways to PURE. One is if you take a brand new head, a brand new shaft, PURE the shaft and assemble it into a head – that’s a brand new club. The second way would be what we call a retro-PURE. One is we take apart an existing club, keep the shaft, take the grip off, peel the tape off underneath the grip. We use our Weiss-Gibson Ultimate Extractor, we cut the ferrule off. We remove the shaft. We drill out the old epoxy in the head and acetone the head down. We then drill out any old epoxy that may be in the tip of the club. We turn down and clean the outside tip of the club if there’s any epoxy or residue from the epoxy itself where the ferrule may have been. We then go ahead and PURE the shaft. We come back and fit a ferrule, reassemble the club. We use a fast dry epoxy with shafting beads in it.

GolfWRX: Now what would you say to those who don’t believe in the SST PUREing process?

DW: In any technology, people question it which is good. People still don’t think the Earth is round. I think if they are honest with themselves – forget about Dick Weiss and SST as an entity. If they’re honest with themselves and they know anything about clubs whether they make them in their garage or professionally, they have to be able to tell that shafts can not perform the same just randomly or haphazardly assembled. Each shaft has its idiosyncrasies.

So I say for the ones that don’t believe in it, do a test yourself without any type of process. Take a club out, hit it, bring it back in, try to stay off the quadrants, 90 degrees left, 180, another 90, that’s not the way to do it. Move it 30 degrees to the left or right. Put it back in and go hit it. Flip the plane upside down, put it back in, and go hit it.

We’ve started doing a lot of internal testing is because everyone says, “Let us see some independent testing.” We said okay and did it. We took the tour van and five workers with us. We used clubs I hadn’t seen. They came from tour. We didn’t look for asymmetric products. We just took what was there, new shafts, new heads, some of the heads I’ve never seen before. It doesn’t make any difference. We’re happy to subject it to any tests.

Scott E Garrison

“Studies have shown the irregularities in shafts, and that causes offline shots. If you play pool at a bar, you’re going to take the straightest queue.”

GolfWRX: How do you showcase the benefits of SST PUREing when players visit your truck?

SEG: When I have a player in the truck, and I do a quick demonstration and put a shaft in the machine, within two minutes, they’re in…they’re hooked.

All the OEMs, they’re seeing their players want this done, so we’re PUREing up shafts and getting them back to [their trucks] so they can build PUREd clubs for their players.

GolfWRX: What performance examples can you give us where a player PUREd his shafts and saw tremendous improvement?

SEG: It was about seven years ago when I just finished re-gripping Ben Martin’s putter with a SuperStroke grip. As he was leaving, I asked him if he had ever had his clubs PUREd. He said, “No, but I had heard about it and was curious.” I showed him a set I was in the middle of PUREing and he was sold. It was Monday morning, the week of the RBC Heritage and it was pouring. He said to PURE his entire set. That’s what I did Monday afternoon. I ripped his gamers apart and PUREd the shafts and put them back together (a retro-PURE). He was leading the tournament, he shot a career-low round and finished third. He told me later how much better his mis-hits were.

Arnie Cunningham

GolfWRX: What’s the most obvious benefit of PUREing?

AC: It’s about dispersion patterns. Until a person can really dive deep into the numbers—and we’ve done it throughout the years at Golf Laboratories and its proved over and over that the dispersion pattern is better PUREd vs not.

GolfWRX: Are there any misconceptions about PUREing?

AC: Detractors might be looking for some miracle feel, but really, it’s about the dispersion and an improvement on the already good technology in shafts.

GolfWRX: Tell us about the USGA restrictions on PUREing.

AC: You’re stabilizing the golf shaft. You’re putting it in the best playing position possible. If you PURE a shaft, by USGA rules, you can not turn that shaft to allow for a draw or a cut. Just that rule tells me they know it works because they’ve tested and they’ve seen the difference in performance.

Your Reaction?
  • 21
  • LEGIT1
  • WOW1
  • LOL2
  • IDHT2
  • FLOP5
  • OB1
  • SHANK10

Continue Reading

WITB

Facebook

Trending