Equipment
Penley returns to shaft market with Quasar ET3
Carter Penley and Penley Golf Shafts are returning to the marketplace with the continuation of the handcrafted ET line. The Quasar ET3 shaft builds on the fundamentals of the ET2 shaft, including Penley’s proprietary TBAR (Tip to Butt Aspect Ratio) algorithm.
The Quasar ET3 is premised on Penley’s early 2000s work with the ETA shaft (played by Phil Mickelson). With the ETA, Penley introduced the aforementioned TBAR algorithm. With Penley’s return to the marketplace a decade later with ET2 shaft, he set out to develop a shaft that would hold up against major manufacturers’ offerings and gain traction on Tour.
Penley’s ET3 (top and bottom views).
Mr. Penley told us the algorithm is intended to offer more forgiveness and tighter dispersion on mishits, as well as a softer feel overall. “The ET2 has great distance and accuracy, but it’s basically for the harder swingers,” Penley said. “We’re opening this to the everyday players with the ET3.”
“I’ve developed a shaft with…a lot of control in the tip section. My job is to try to correct mis-hits. I had the opportunity to work with Lanny Wadkins years ago when he was going from steel to carbon fiber and he said, ‘No matter how good a player is, all he wants is the club that gives him the best mis-hit.’ I put that in the back of my head.”
Penley stressed the attention to detail and tolerances in his hand-built offerings.
“I’m going to hand build these shafts. I’m going to grind and sand these things right in the center of the range. And I don’t make 10,000 shafts. The biggest lot I’ll make is 100. In long drive, I make only 10 at a time. I hand grind those guys to a perfect TBAR. And I can move it up and down a bit with Zone Flex Characterization.”
“I want to go back to the way it was when Bobby Jones was playing golf. Hand making wooden shafts. Sanding and grinding, that’s what they did. Carbon fiber is just a composite…and so is wood.”
The Quasar ET3 is scheduled for release in late February 2017 and will be available in R, S, and X flexes with a retail price of $249.
- LIKE79
- LEGIT22
- WOW11
- LOL2
- IDHT1
- FLOP1
- OB2
- SHANK1
- Steve Stricker WITB accurate as of the Zurich Classic. More photos from the event here.
Driver: Titleist TSR3 (9 degrees, C4 SureFit setting)
Shaft: Fujikura Motore Speeder VC 7.2 X
3-wood: Titleist 915F (13.5 degrees)
Shaft: Mitsubishi Tensei CK Pro White 80 TX
Hybrid: Titleist 816 H1 (17 degrees)
Shaft: Fujikura Motore Speeder VC 9.2 X
Irons: Titleist T200 (3, 4), Titleist T100 (5-9)
Shafts: Project X 6.5
Wedges: Titleist Vokey SM8 (46-10F @55), Titleist Vokey SM10 (54-10S @53), Titleist Vokey SM4 (60 @59)
Shafts: True Temper Dynamic Gold X100 w/Sensicore
Putter: Odyssey White Hot No. 2
Ball: Titleist Pro V1x
Grips: Golf Pride Tour Velvet Grip Rite
Check out more in-hand photos of Steve Stricker’s clubs here.
- LIKE12
- LEGIT2
- WOW0
- LOL0
- IDHT1
- FLOP0
- OB0
- SHANK0
- Alex Fitzpatrick what’s in the bag accurate as of the Zurich Classic.
Driver: Ping G430 LST (10.5 degrees)
Shaft: Fujikura Ventus Black 6 X
3-wood: TaylorMade Qi10 (15 degrees)
Shaft: Fujikura Ventus TR Black 7 X
Hybrid: Ping G430 (19 degrees)
Shaft: Fujikura Ventus Black HB 10 TX
Irons: Ping iCrossover (2), Titleist T100 (4-PW)
Shafts: Fujikura Ventus Black HB 9 TX (2), Nippon N.S. Pro Modus 3 Tour 120 X (4-9)
Wedges: Titleist Vokey Design SM10 (50-12F, 56-12D, 60-08M)
Shafts: Nippon N.S. Pro Modus 3 Tour 120 X
Putter: Bettinardi SS16 Dass
Grips: Golf Pride MCC
Check out more in-hand photos of Alex Fitzpatrick’s clubs here.
- LIKE4
- LEGIT0
- WOW0
- LOL0
- IDHT1
- FLOP0
- OB0
- SHANK0
In our forums, our members have been discussing Mini-Drivers and accompanying shafts. WRXer ‘JamesFisher1990’ is about to purchase a BRNR Mini and is torn on what shaft weight to use, and our members have been sharing their thoughts and set ups in our forum.
Here are a few posts from the thread, but make sure to check out the entire discussion and have your say at the link below.
- PARETO: “New BRNR at 13.5. Took it over to TXG (Club Champ but TXG will always rule) in Calgary for a fit. Took the head down to 12, stuck in a Graphite Design AD at 3 wood length and 60g. Presto- numbers that rivaled my G430Max but with waaaaay tighter dispersion. Win.”
- driveandputtmachine: “Still playing a MIni 300. The head was only 208, so I ordered a heavier weight and play it at 3 wood length. I am playing a Ventus Red 70. I play 70 grams in my fairways. I use it mainly to hit draws off the tee. When I combine me, a driver, and trying to hit a draw it does not work out well most of the time. So the MIni is for that. As an aside, I have not hit the newest BRNR, but the previous model wasn’t great off the deck. The 300 Mini is very good off the deck.”
- JAM01: “Ok, just put the BRNR in the bag along side a QI10 max and a QI10 3 wood. A load of top end redundancy. But, I have several holes at my two home courses where the flight and accuracy of the mini driver helps immensely. Mine is stock Proforce 65 at 13.5, I could see a heavier shaft, but to normal flex, as a nice alternative.”
Entire Thread: “What’s the perfect Mini-Driver/Shaft combo? – GolfWRXers discuss”
- LIKE4
- LEGIT1
- WOW0
- LOL0
- IDHT0
- FLOP0
- OB0
- SHANK4
Dave Portnoy places monstrous outright bet for the 2024 Masters
John Daly stuns fans into silence with brutal opening tee shot on PGA Tour Champions
Things got heated at the Houston Open between Tony Finau and Alejandro Tosti. Here’s why
Justin Thomas on the equipment choice of Scottie Scheffler that he thinks is ‘weird’
Tiger Woods arrives at 2024 Masters equipped with a putter that may surprise you
‘Absolutely crazy’ – Major champ lays into Patrick Cantlay over his decision on final hole of RBC Heritage
Report: Tiger Woods has ‘eliminated sex’ in preparation for the 2024 Masters
Two star names reportedly blanked Jon Rahm all week at the Masters
2-time major champ announces shock retirement from the sport at age of 33
Report: LIV Golf identifies latest star name they hope to sign to breakaway tour
Steve Stricker WITB 2024 (April)
Steve Stricker WITB accurate as of the Zurich Classic. More photos from the event here. Driver: Titleist TSR3 (9 degrees, C4...
Alex Fitzpatrick WITB 2024 (April)
Alex Fitzpatrick what’s in the bag accurate as of the Zurich Classic. Driver: Ping G430 LST (10.5 degrees) Shaft: Fujikura...
Alejandro Tosti WITB 2024 (April)
Alejandro Tosti what’s in the bag accurate as of the Zurich Classic. Driver: Srixon ZX5 Mk II LS (9.5 degrees...
Drew Brees WITB 2024 (April)
View this post on Instagram A post shared by GolfWRX (@golfwrx) Driver: TaylorMade Stealth 2 Plus (10.5 degrees)...
-
19th Hole2 weeks agoDave Portnoy places monstrous outright bet for the 2024 Masters
-
19th Hole5 days agoJustin Thomas on the equipment choice of Scottie Scheffler that he thinks is ‘weird’
-
19th Hole3 weeks agoTiger Woods arrives at 2024 Masters equipped with a putter that may surprise you
-
19th Hole4 days ago‘Absolutely crazy’ – Major champ lays into Patrick Cantlay over his decision on final hole of RBC Heritage
-
19th Hole2 weeks agoTwo star names reportedly blanked Jon Rahm all week at the Masters
-
19th Hole2 weeks agoReport: LIV Golf identifies latest star name they hope to sign to breakaway tour
-
19th Hole2 weeks agoNeal Shipley presser ends in awkward fashion after reporter claims Tiger handed him note on 8th fairway
-
19th Hole1 week agoBrandel Chamblee has ‘no doubt’ who started the McIlroy/LIV rumor and why
TC
Feb 28, 2017 at 12:12 am
I play Penley Steath in my irons, LOVE THEM, still perfect after 7+ years of playing. I play the Penley Platinum in a BB 3 wood, best 3 wood EVER, it s 20 yards longer than ANY other shaft and much more accurate and consistent. I play the ET2 in a SLDR 460 head, it too, is the longest and straightest shaft I’ve ever hit and I’ve tried them ALL! I haven’t tried the new Quasar but being it’s a Penley, i’m sure it will outperform anything you put it up against!
Don
Feb 24, 2017 at 4:08 pm
Mr. Penley is awesome and very accommodating to work with and his line of shafts rival the big dogs for a fraction of the price. I replaced a HZRDUS black with an ET2 in my M2 driver and haven’t looked back.
Johnnylongballz
Feb 21, 2017 at 4:00 am
My 905R that had a Penley in it, may have been the best driver I ever owned. Looking forward to trying this new line! Great shafts
IDC
Feb 21, 2017 at 2:40 am
Specs look good. Nice graphics
Bro Squad ?
Feb 20, 2017 at 9:49 pm
Please bring back the Stealth 60 and 70!!! (Matte Black and Yellow! #Elcajon
John Muir
Feb 20, 2017 at 7:00 pm
Penley shafts are fantastic.
moses
Feb 20, 2017 at 6:43 pm
I used to play Penley shafts back in the day. They were awesome. Glad to see they’re back.
Jim
Feb 20, 2017 at 10:13 am
For those who weren’t heavy into this from 85 – 05, Penley were the first shafts that incorporated both lower torque & feel….I used custom XXX driver shafts and the IMS iron shafts from him for years until the explosion in shaft tech that started in 2005….since 2007 shaft technology has expanded every year – far beyond the ‘tech’ in the heads…
Penley always gave great service (no problem with returns for breakage) quick custom order filling and produced excellent, consistent shafts…Welcome Back, Good Luck