Connect with us

Equipment

New Miura Golf President says quality, pricing “will stay the same”

Published

on

New Miura Golf President Hoyt McGarity confirmed to GolfWRX that a new group has made a significant investment in Miura Golf. True Spec Golf will now act as a management company that deals specifically with the worldwide sales and distribution of Miura products.

The news of Miura’s sale, which was first reported on GolfWRX, created a flurry of discussion about Miura’s future within the golf equipment world — both the Miura family’s role, and potential changes to Miura products.

“At the end of the day, I want to get across to people that Miura Golf clubs are going to continue to be made at the same factory in Himeji, Japan,” McGarity told GolfWRX. “Mr. Miura and his family will have control over everything that goes on with production and development of Miura clubs.”

McGarity also addressed questions about Miura’s quality and pricing, saying that the company’s tolerances “have always been tight, and they’re going to stay tight.” He also said prices of Miura clubs “will stay the same.”

“[Miura clubs] aren’t for the mass market and are never going to be,” he said. “We’re an ultra-premium brand, and we’re going to stay ultra-premium.”

Miura_Irons

McGarity, 33, is also the CEO of True Spec Golf, a custom club-fitting company that was founded in 2014 and has expanded to 10 physical locations under his leadership. The company takes what it calls a “brand-agnostic” approach to club fitting, helping golfers find the best golf clubs for their game. McGarity is also the CEO of True Spec Golf sister company Club Conex.

“True Spec will always be brand agnostic,” McGarity said. “If [another brand’s clubs] are better than Miura’s, that’s a Miura problem. We’re always going to sell the best-performing clubs to our customers.”

True Spec will act as a “fulfillment center” for Miura, McGarity said, specifically as “a shipping and storage place.”

McGarity stated that the real advantage for Miura’s partnership with True Spec is True Spec’s ownership of Club Conex, a company that sells patented components that allow golfers to try the same golf shaft in a variety of different golf club heads, regardless of club head manufacturer. Club Conex is used by the vast majority of premium club fitters, opening up important distribution channels for Miura.

“Club Conex is primed to help Miura with distribution,” McGarity said. “With Miura, you’re going to see a company that’s heavily consumer-focused and dealer-focused.”

McGarity also cited the importance of improving the appeal of the Miura brand internationally. “The brand and its appearance have to be the same quality as the clubs themselves,” McGarity said. “Because no one makes better forged irons than the Miura family.”

Your Reaction?
  • 109
  • LEGIT22
  • WOW18
  • LOL3
  • IDHT2
  • FLOP4
  • OB1
  • SHANK25

20 Comments

20 Comments

  1. Faking-it-with-blades

    Jan 14, 2017 at 11:06 am

    Anyone notice a particular iconic Miura iron NOT featured in the glamour shot above? Is the Baby Blade literally “out of the picture” going forward?

  2. rex235

    Jan 12, 2017 at 8:16 pm

    “Miura will remain an ultra premium brand…”
    When Miura makes a LH forged model of the 1957 Cavity Back they made for Jack Nicklaus…

  3. ZJohnson

    Jan 12, 2017 at 4:21 pm

    Ok, now this makes sense. Cool Clubs did fulfillment for Miura this time last year as they started to sell their product in brick and mortar stores across the US. They built approx. 100 sets before having to stop so they didn’t fall behind with their own customers. Cool Clubs distributes for KBS now as it is much more time and cost effective for them. Unless True Spec hires two/three guys to do nothing but fulfill Miura’s orders, it’s going to be tough for them to keep up.

    • B. McKenna

      Jan 16, 2017 at 7:31 pm

      I watched this Hoyt guy try to bend a set of irons at Modern Golf and it was pretty bad. There are tons of industry guys with more knowledge than him. I’d give this relationship 6 months. If CC couldn’t pull it off with their facility, doubt Tour Spec will be able to handle it.

  4. LD

    Jan 12, 2017 at 9:36 am

    Talk is cheap.

  5. Tom C

    Jan 12, 2017 at 9:29 am

    Well, at least he’s an Irishman.

    Those new irons are already a clear indicator of a different direction. I appreciate the new Presidents words, but I just don’t see how it will happen. I’m sure there will be a clear view of things that a new owner would want to do to make money, and some of the current operations are cost prohibitive in terms of manufacturing, but some of those things are what make them such quality clubs. It’s contradictory to say that “we want to increase the brand recognition world wide”, but we aren’t going to make it a mass selling brand.

    The brand and it’s appearance are already as good as the clubs themselves, they just want to sell more and more of them, which I understand, as the market is becoming more and more competitive in this ultra-premium market. That being said, it’d be like saying Koenigsegg needs to market better because they sell 20 cars a year, when Ferrari sells 100. Koenigsegg’s are made in an old airplane hangar, and make the fastest cars in the world, and much like Miura, most people have no idea what they are, but for those that do, they’re all you’d ever want, and you wouldn’t want them to change.

    This is like Mercedes releasing the “Under $30k” renditions of their cars. Yeah, it’s nice. Yeah, it says Mercedes, but is it really a Mercedes? Meh.

    The only consolation I find in this is that the buy out isn’t from a direct competitor looking to buy out their market share (and avoid questioning over patents), so it’s not going to be an Adams-Taylormade ordeal.

  6. Daniel

    Jan 12, 2017 at 9:26 am

    Wasn’t their PP-9005 Genesis clubs that GolfWRX just reviewed made in some other factory?

    • Zak Kozuchowski

      Jan 12, 2017 at 9:34 am

      The Genesis irons are made in Miura’s factory. That correction has been made in our review: http://www.golfwrx.com/419156/review-miura-neo-genesis-pp-9005-irons/

    • Adam

      Jan 12, 2017 at 9:35 am

      Absolutely correct:
      Production country “China”

      http://www.miuragiken.com/products/passing_point/pp-9005/index.html

      • Daniel

        Jan 12, 2017 at 9:53 am

        The sentence in that review article was too specific to have been a typo IMO. Something about the geometries being too hard for that facility.

        • Zak Kozuchowski

          Jan 12, 2017 at 10:54 am

          Thanks for the questions and comments, guys. This response is directly from Miura:

          “All Miura irons start from a single billet of soft carbon Japanese steel at the Miura Giken factory in Himeji. (this is what will always distinguish Miura irons) The next step of the process is working with our partner in Taiwan to complete the manufacturing process (the 455 Carpenter Steel face) The clubs are then shipped back to the Miura factory for final inspection before making their way to market.”

          “With reference to the Miura Giken website, technically the club is “finished in Taiwan (China) and thus you are not able to say Made it Japan, however, the Miura family is involved in the process, start to finish.”

          • gunmetal

            Jan 12, 2017 at 2:08 pm

            So the Japanese plant has lost capability to finish the heads? Or it’s just cheaper for them to ship them off to Taiwan/China, pay Taiwan/China labor rates, then ship them back to Japan or straight to True Spec or whoever than it is to just finish them in Japan?

            I know this is partly semantics, but when you play the “Made/Forged in Japan” card so blatantly sometimes the details can be a little muddy, lol.

            • Mark

              Jan 12, 2017 at 3:13 pm

              I do not think this is about cheaper labour rates. Taiwanese companies are, collectively, the world’s biggest producers of golf equipment. They own all of the major production sites in China and many of them have kept their specialist production units located in Taiwan (driver heads which require intricate casting tend to be produced there). I think Miura have simply chosen a high quality Taiwanese supplier to do what they are unable to do. If I remember correctly, Tom Wishon has used Taiwan based facilities for his advanced materials designs.

  7. Rich

    Jan 12, 2017 at 8:55 am

    There is no way Miura will not fall victim (to what degree is yet to be seen) to compromise when there has been significant investment. Whoever put the money in, will expect to see money back and that will not happen with significant change.

  8. Adam

    Jan 12, 2017 at 5:39 am

    So has TSG bought or invested in Miura Golf (which is the North American and International Sales arm of Miura) or have they bought the parent company Miura Giken from Japan who produces all the clubs for Miura and Miura Giken. So far in 2 articles it is still not clear!

    • Zak Kozuchowski

      Jan 12, 2017 at 7:34 am

      Adam,

      Miura offers slightly different products under the names Miura and Miura-Giken (Japan), but all products are designed and manufactured under one roof. The deal encompasses all of Miura.

      • S Hitty

        Jan 12, 2017 at 12:29 pm

        I don’t get why such information is so hard to obtain from their own website and why do you have to explain it all in the comments and not in the articles themselves.

        • Zak Kozuchowski

          Jan 12, 2017 at 12:40 pm

          We have added the detail to the body of the Genesis review for all future readers to understand and discuss.

  9. Tom

    Jan 11, 2017 at 8:58 pm

    +1

  10. Chunkiebuck

    Jan 11, 2017 at 8:36 pm

    Hey, are those rear tail lights or turn signals on the back? I’m guessing they flash left or right depending on ball flight direction. You know, in case you missed the flight of your ball, you can
    take a quick peek at the back of these clubs for confirmation.

Leave a Reply

Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Equipment

How did heavier or lighter shafts affect your iron performance? – GolfWRXers discuss

Published

on

In our forums, our members have been discussing shaft weight and how it affects their iron play. WRXer ‘RoyalMustang’ kicks off the thread asking two questions:

“1) If you went lighter, how did it impact your game (down to 95-105g). Tempo changes, good or bad?   

2) If you went heavier (120-130g), same question? Good move?”

And our members have been sharing their experiences in our forum.

Here are a few posts from the thread, but make sure to check out the entire discussion and have your say at the link below.

  • gripandrip: “Average about 105 on my driver swing speed… not much more anymore. Currently playing to a ~2 HC. Switched from DGS300 to Steelfiber i95. No issues for me at all. I stayed with DG400’s in my wedges. Initially, I thought I had issues with dispersion, but after a couple of rounds, it was no longer a concern.”
  • mackepa: “I have found that around 120 grams is the “sweet spot” for my iron game. Anything heavier, and I start swinging hard to try to get the shaft to feel like it’s loading. Anything lighter than 120, and it starts to feel like a toothpick. I tend to also play my irons over length since I’m a little taller. I currently swing driver about 110mph, but I don’t really go after my irons with the same effort. I currently love the KBS $-Taper 120 Stiff.”
  • erikro: “Biggest difference for me is with the s300 shaft I feel it more the next morning. With a 105 gram shaft I have no trouble.”
  • Ri_Redneck: “I play graphite iron shafts, but only 115g and higher. I like a club with some heft. If they get too light, it throws my sequencing off, and balls go everywhere. I can’t say I’ve ever gotten too heavy in my irons, but 80g is the top of what I like in my driver and FWs.”

Entire Thread: “How did heavier or lighter shafts affect your iron performance?”

Your Reaction?
  • 4
  • LEGIT1
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK1

Continue Reading

Equipment

Coolest thing for sale in the GolfWRX Classifieds (10/22/21): Nike Method 004 putter

Published

on

At GolfWRX, we love golf, plain and simple.

We are a community of like-minded individuals that all experience and express our enjoyment of the game in many ways. It’s that sense of community that drives day-to-day interactions in the forums on topics that range from best driver to what marker you use to mark your ball. It even allows us to share another thing we all love – buy and selling equipment.

Currently, in our GolfWRX buy/sell/trade (BST) forum, there is a listing for a Nike Method 004 putter

From the seller(@dlholden): “Nike Method – Model 004 – 33″ w/ Super Stroke Slime 3.0 (no headcover) –  Here is another putter that starts the ball rolling as soon as you touch it.  No bouncing the ball toward the hole, just end over end rolling…..for days!  This thing drains putts as long as you start them online.  $150/OBO”

To check out the full listing in our BST forum, head through the link: Nike Method 004 putter

This is the most impressive current listing from the GolfWRX BST, and if you are curious about the rules to participate in the BST Forum you can check them out here: GolfWRX BST Rules

Your Reaction?
  • 0
  • LEGIT0
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

Whats in the Bag

Cam Smith WITB 2021 (October)

Published

on

Driver: Titleist TSi3 (10 degrees, A1 SureFit)
Shaft: Fujikura Ventus Blue 6 X

3-wood: Titleist TSi2 (15 degrees @16, D4 SureFit)
Shaft: Fujikura Ventus Blue 8 X

7-wood: Titleist TS2 (18 degrees @19, D4 SureFit)
Shaft: UST Elements Red 8F5 (X)

 

Irons: Titleist T100 Black (4-9)
Shaft: KBS Tour 130 Custom Matte Black X

Wedges: Titleist Vokey Design SM8 (46-10F, 52-08F, 56-08M), WedgeWorks 60T
Shafts: KBS Tour 130 Custom Matte Black (46), True Temper Dynamic Gold Tour Issue Onyx X100 52, 56, 60 degrees)

Putter: Scotty Cameron 009M Prototype

Ball: Titleist Pro V1x

Grips: Golf Pride Tour Velvet Cord

 

Your Reaction?
  • 14
  • LEGIT1
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB1
  • SHANK1

Continue Reading

WITB

Facebook

Trending