Connect with us

Equipment

Q&A: Air Force One launches new irons, sheds Powerbilt branding

Published

on

Succeeding in the golf equipment industry takes good science. There’s the science of engineering top-performing clubs, but companies also need to be scientific in delivering the right message to consumers.

Ross Kvinge, formerly President and CEO of Powerbilt Golf, says his company was doing the hard work of making great golf clubs, but were overlooked by consumers – at least partly due to Powerbilt’s divided brand image. While Powerbilt made high-end golf equipment through its Air Force One line, it also made budget-friendly equipment for recreational golfers.

Could Air Force One products enjoy more success without the Powerbilt name?

Ross_Kvinge_QA_AFO

Ross Kvinge, President of Air Force One Golf

Kvinge is about to find out. His new company, Air Force One Golf, will keep the nitrogen-charged technology that its clubs were known for, but leave the Powerbilt name behind. Enjoy our Q&A with Kvinge, now president of Air Force One, about the new brand, as well Air Force One’s AFX Pro Series new irons and yet-to-be-announced fairway woods.

WRX: Was it a tough decision to leave behind a company name that has been such a big part of your life since 1998?

RK: No doubt. There is a lot of heritage in the PowerBilt brand and we felt we would be able to leverage that with the introduction of the nitrogen charged patented technology. However, we found we were investing in re-establishing the PowerBilt brand in the premium market. We found that to be a bit more difficult than a clean launch of our patented technology under the Air Force One brand. As an industry veteran I grew up with the PowerBilt brand and remember the good days when PowerBilt was a leader in the persimmon wood market and forged irons. Unfortunately younger generations don’t know about those days and see the value in the brand.

WRX: Tell us about the new AFX Pro Series irons. What’s the target audience? 

unspecified

RK: The AFX Pro Series has evolved over the years mainly from input from our customers. We first introduced the Game Improvement iron with every club in the set pressurized with nitrogen. We found in the short irons, control was more of an issue than the added distance from the nitrogen so we went to a cavity back. We then saw better players interested in just the long irons with nitrogen due to the feel and distance the clubs delivered. We saw a market there, but knew we needed a club head shape that would appeal to the better player. Through that we developed the AFX Pro Series iron with a thinner top line and sole along with reduced offset.

WRX: We reviewed the Air Force One DFX MOI and Air Force One DFX Tour drivers when they were Powerbilt products, and found their performance to rival or even surpass top-selling drivers. Will anything change about them?

unspecified-4

RK: We are working on new drivers for the future, however, to help with a smooth transition we utilized the same tooling. As you stated, the DFX MOI and DFX Tour have tested quite well against the competition. We have a huge potential to increase our distribution and reach a lot of people now that haven’t had a chance to experience the Nitrogen Charged Technology. We felt the current model would position well for the new launch.

WRX: You told us there’s a new fairway wood in the works. When will it be released, and what makes it different?

unspecified-3

RK: Yes we do have a new fairway wood that we will introduce in late April. On our previous fairway woods we lost some of the benefits of the nitrogen technology due to the shallow face on the woods.

unspecified-2The key for the nitrogen is to get the trampoline effect and allow the nitrogen pressure to rebound the face and increase ball speed. Since it is more difficult to create the same effect on a fairway wood we went to our Air Foil dual slot technology. This has somewhat of an accordion effect on the sole and the crown that allows the whole face to move and allows for the spring back effect of the Nitrogen pressure. This will enable us to compete in distance and accuracy that we have seen in some of the most recent competitor fairway woods.

WRX: Thank you for your time, Ross.

Your Reaction?
  • 81
  • LEGIT16
  • WOW7
  • LOL10
  • IDHT2
  • FLOP11
  • OB4
  • SHANK86

We share your golf passion. You can follow GolfWRX on Twitter @GolfWRX, Facebook and Instagram.

16 Comments

16 Comments

  1. Shank-Master

    Apr 19, 2016 at 7:17 pm

    Change the brand to Titleist and all those who voted shank would be drooling and performing self gratifying acts on themselves in a circular formation at the thought of being able to buy these at 4 times the cost these clubs sell for.

  2. Jbeagle

    Apr 12, 2016 at 3:41 pm

    If you reshaft does the nitrogen leak out? or is it trapped in the head?

    • Tj

      Aug 9, 2021 at 10:39 pm

      Idk.. Does nitrogen leak when u change your tire??

  3. Frank Gatazka

    Apr 12, 2016 at 11:36 am

    The end of an era! First there was Hagen, then MacGregor, now PowerBilt. The brand did not quite make 100 years. I have played PowerBilt equipment since I learned the game in high school, 42 years ago. I fondly remember their persimmon Citation woods and forged Citation irons, both in stainless and high nickel chrome plated carbon steel. They were played by some of the best including Bobby Nichols, Miller Barber, Frank Beard (I have one of his PB drivers in my collection), Gay Brewer, Charlie Coody, Bill Kratzert and Fuzzy Zoeller. The persimmon woods were simply the best crafted commercial woods that could be had at the time. I was lucky to have a custom set made in 1990 at the very end of the persimmon era and visited the then famous “Slugger Park” factory in Jeffersonville Indiana to watch them be completed. The TPS cavity back irons in their original configuration were some of the most forgiving cast clubs available. Recently, I’ve played the Air Force One irons and Air Foil 2 woods and found the irons and driver very easy to hit, and long. The only problem is that I managed to crack three of them (not due to my swing speed for sure, as it is 85-87 MPH), due to a design defect where the sweet spot has milled grooves in the already thin face, thus precipitating a fatigue crack problem (I suppose if I didn’t hit the sweet spot as frequently there would not be a problem?). PowerBilt was always there with great customer service, and I have had the cracked clubs replaced. I believe the newer models have a slightly thicker face to avoid this cracking problem. To me it is sad indeed to see the name go the way of low-cost starter sets and junior clubs (now licensed to Hireko Golf) when PowerBilt used to stand for quality, and was for many years the “pride of the pro shop”. Alas, time marches on! I wish the new Air Force One brand good luck, as the product is for real and not just a gimmick!

    • James

      Apr 26, 2016 at 5:27 pm

      The Powerbilt brand is not dead, it was just purchased by another company.

    • James

      Apr 26, 2016 at 5:29 pm

      Oops, didn’t read your entire post before commenting. Sorry!

  4. George

    Apr 12, 2016 at 8:44 am

    Is there a problem with the nitrogen leaking with time since there is material fatigue from use?

  5. Chuck D

    Apr 12, 2016 at 12:46 am

    Nitrous oxide has to be the next frontier for golf distance, right? Hitting it 400 has to be the next

    big thing for amateurs! Oh wait…………..

  6. Brian

    Apr 11, 2016 at 1:58 pm

    I game an AFO DFX and it’s really a fantastic club. The sound is a little tricky to get used to initially, but the numbers and performance are there. The only thing I wish AFO would do with the next iteration is add adjustability. My shaft selection has brought ball flight down, but I’d love to be able to control it that much more. Good luck, AFO!

  7. Regis

    Apr 11, 2016 at 1:39 pm

    I flirted with the idea of buying the Air Force One driver several times because it received very good reviews from a number of sites. I always failed to pull the trigger because it was never available for demo anywhere near me and I live in a densely populated area with a very big golf presence. In today’s market I just don’t see any manufacturer making substantial gains without in hand availability and that, to some extent goes for Bridgestone (clubs), Srixon , Wilson and a lot of other traditional names. What I see in a private cub environment is that one guy shows up with a new driver (set of irons, putter) he’s loving it and all of a sudden its the local rage. Changing the name is not going to be significant.

  8. Ron

    Apr 11, 2016 at 12:24 pm

    The first set of iron I had were Power Bilt Citation Levelumes. Should have kept the Power Bilt name!

  9. Meaks

    Apr 11, 2016 at 11:32 am

    Clearly this was an in-house branding effort. No legitimate marketing vendor would have advised them to use this name for a brand name and I wish them luck trying to compete against Nike in SEO on Air Force One.

    • Eric

      Apr 12, 2016 at 8:36 pm

      Kind of a harsh comment but I totally. The name just reeks of gimmick low end gear. Shame they didn’t at least split the brand the other way, restore the strength of the venerable Powerbilt brand and rename the low end.

  10. TCJ

    Apr 11, 2016 at 8:30 am

    Nitrogen?! Now all they need are some ball bearings…

Leave a Reply

Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Whats in the Bag

Steve Stricker WITB 2024 (April)

Published

on

Driver: Titleist TSR3 (9 degrees, C4 SureFit setting)
Shaft: Fujikura Motore Speeder VC 7.2 X

3-wood: Titleist 915F (13.5 degrees)
Shaft: Mitsubishi Tensei CK Pro White 80 TX

Hybrid: Titleist 816 H1 (17 degrees)
Shaft: Fujikura Motore Speeder VC 9.2 X

Irons: Titleist T200 (3, 4), Titleist T100 (5-9)
Shafts: Project X 6.5

Wedges: Titleist Vokey SM8 (46-10F @55), Titleist Vokey SM10 (54-10S @53), Titleist Vokey SM4 (60 @59)
Shafts: True Temper Dynamic Gold X100 w/Sensicore

Putter: Odyssey White Hot No. 2

Ball: Titleist Pro V1x

Grips: Golf Pride Tour Velvet Grip Rite

Check out more in-hand photos of Steve Stricker’s clubs here.

Your Reaction?
  • 5
  • LEGIT0
  • WOW0
  • LOL0
  • IDHT1
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

Whats in the Bag

Alex Fitzpatrick WITB 2024 (April)

Published

on

  • Alex Fitzpatrick what’s in the bag accurate as of the Zurich Classic. 

Driver: Ping G430 LST (10.5 degrees)
Shaft: Fujikura Ventus Black 6 X

3-wood: TaylorMade Qi10 (15 degrees)
Shaft: Fujikura Ventus TR Black 7 X

Hybrid: Ping G430 (19 degrees)
Shaft: Fujikura Ventus Black HB 10 TX

Irons: Ping iCrossover (2), Titleist T100 (4-PW)
Shafts: Fujikura Ventus Black HB 9 TX (2), Nippon N.S. Pro Modus 3 Tour 120 X (4-9)

Wedges: Titleist Vokey Design SM10 (50-12F, 56-12D, 60-08M)
Shafts: Nippon N.S. Pro Modus 3 Tour 120 X

Putter: Bettinardi SS16 Dass

Grips: Golf Pride MCC

Check out more in-hand photos of Alex Fitzpatrick’s clubs here.

Your Reaction?
  • 2
  • LEGIT0
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

Equipment

What’s the perfect mini-driver/shaft combo? – GolfWRXers discuss

Published

on

In our forums, our members have been discussing Mini-Drivers and accompanying shafts. WRXer ‘JamesFisher1990’ is about to purchase a BRNR Mini and is torn on what shaft weight to use, and our members have been sharing their thoughts and set ups in our forum.

Here are a few posts from the thread, but make sure to check out the entire discussion and have your say at the link below.

  • PARETO: “New BRNR at 13.5. Took it over to TXG (Club Champ but TXG will always rule) in Calgary for a fit. Took the head down to 12, stuck in a Graphite Design AD at 3 wood length and 60g. Presto- numbers that rivaled my G430Max but with waaaaay tighter dispersion. Win.”
  • driveandputtmachine: “Still playing a MIni 300.  The head was only 208, so I ordered a heavier weight and play it at 3 wood length.  I am playing a Ventus Red 70.   I play 70 grams in my fairways.  I use it mainly to hit draws off the tee.  When I combine me, a driver, and trying to hit a draw it does not work out well most of the time.  So the MIni is for that. As an aside, I have not hit the newest BRNR, but the previous model wasn’t great off the deck.  The 300 Mini is very good off the deck.”
  • JAM01: “Ok, just put the BRNR in the bag along side a QI10 max and a QI10 3 wood. A load of top end redundancy. But, I have several holes at my two home courses where the flight and accuracy of the mini driver helps immensely. Mine is stock Proforce 65 at 13.5, I could see a heavier shaft, but to normal flex, as a nice alternative.”

Entire Thread: “What’s the perfect Mini-Driver/Shaft combo? – GolfWRXers discuss”

Your Reaction?
  • 3
  • LEGIT1
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK4

Continue Reading

WITB

Facebook

Trending