Connect with us

Equipment

Callaway Big Bertha Mini 1.5

Published

on

Callaway’s Big Bertha Mini 1.5 is the latest entry into the recently crowded category of “driving woods” — clubs too large to be considered fairway woods, but only about half the size of modern drivers. Their larger size makes them longer and more forgiving than fairway woods off the tee, but smart sole shaping allows them to be a threat from the turf, if necessary. They also have shaft lengths that are shorter than drivers, which can offer golfers more control from the tee box.

[quote_box_center]”The pros generally hit their drivers pretty straight, so you’ll probably tend to see this club more widely used on shorter courses, where you don’t need driver on every hole, or on courses where you’re required to shape your shots a lot,” said Evan Gibbs, Callaway’s senior manager of R&D for woods, in a company interview. [/quote_box_center]

Callaway arguably started the modern driving wood category in 2013 when it released the X Hot 3Deep in 2013. Phil Mickelson used the strong-lofted, oversized fairway wood as a driver to win that year’s Open Championship, and raved to the press about the high ball speeds and low spin rates he saw from the club. He said he was able to hit the 43.5-inch 3Deep almost as far as his driver — and he did.

8835ca5e833f7607f5bbf79e7dcc0688

The Big Bertha Mini 1.5 is 35 percent larger than Callaway’s XR fairway woods.

The Big Bertha Mini 1.5 has a lot in common with the X Hot 3Deep, as well as Callaway’s follow-up models, but it’s a distinctly different club. At 235cc, 50cc bigger than the X Hot 3Deep, it’s more of a tee shot-first club. It’s also about 0.5 inches longer than those fairway woods at its stock length of 44 inches, which is still about 1.5 inches shorter than most modern drivers.

a33209dc99e007a2f3b0a40dced3a96e

Callaway’s uses a “Hyper Speed Face Cup” to enhance ball speed on shots contacted across the club face.

Maybe the biggest difference between the Big Bertha Mini 1.5 and Callaway’s previous oversized fairway woods, aside from its added size, is that the Mini 1.5 is adjustable. It uses Callaway’s OptiFit hosel to give golfers a 3-degree range of adjustability (1 degree down, 2 degrees up from stock loft), as well as two independent lie angle settings (neutral and upright).

More detail-oriented golfers will want to know that the Mini 1.5 marks the first time Callaway has merged its Forged Hyper Speed Cup Face with a Forged Composite Crown in a fairway wood. The Face Cups are thin and strong to boost face flexibility for more ball speed, while the Forged Composite Crowns help engineers move weight lower in the club head for added forgiveness.

e2ed6b46fef6c2d7e2a92ee876446f82

The Mini 1.5 uses Callaway’s cambered Warbird sole to help golfers use the oversized fairway wood from the turf.

The Big Bertha Mini 1.5 ($299) is available in lofts of 12 and 14 degrees, and will be in stores on May 29. It comes stock with Mitsubishi Rayon’s Kuro Kage Silver TiNi Second-Generation 60-gram shafts.

Click here to see what GolfWRX Members are saying about the Big Bertha Mini 1.5 in our forum. 

Your Reaction?
  • 182
  • LEGIT40
  • WOW21
  • LOL8
  • IDHT7
  • FLOP10
  • OB3
  • SHANK23

13 Comments

13 Comments

  1. JimmyO

    May 28, 2015 at 9:39 pm

    Was hitting low bullets with the 12 degree (even at +2 with the loft) but the dispersion was really tight. Would love to test this in the 14 degree model against my ti/tungsten Hawkeye 2 wood. It’s roughly the same size (+/- 10cc) so we’ll see how it compares to the trusty 2.

  2. Golfraven

    May 17, 2015 at 4:15 pm

    I am becoming a fan of those mini driver. Currently playing a Fd 3 wood and even if I hit it crap the ball still has good distance and direction. Currently staying away from my driver especially when I hardly get to play.

  3. Oldplayer

    May 16, 2015 at 2:52 am

    A club to hit from the tee that has a smaller head and a shorter shaft. Isn’t this back to the future? This describes what drivers were like 15 years ago. Although I concede modern materials and a thinner face does update the design.

  4. Miguel

    May 15, 2015 at 3:57 pm

    I tried the SLDR Mini and I loved how it was so easy to use compared to my driver. Even if I lost a few yards compared to my driver, the dispersion and confidence it gave me was unbelievable. I am pretty sure this club will have the same effect. Higher loft, shorter shaft, smaller head…and this one is adjustable!

  5. Jim

    May 15, 2015 at 2:55 pm

    I’m such a sap for this stuff, even when I am comfortable with my equipment I still jump.

    • rer4136

      May 22, 2015 at 3:57 pm

      Ditto to that. I am an equipment addict. Manufacturers take advantage at every turn.

  6. Hazen

    May 15, 2015 at 1:43 pm

    Have been a fan of 3woods off the tee for a few years due to the smaller head. I’m a Callaway fan, have been since I started golf, but I recently tried one of the SLDR mini drivers and loved it but honestly didn’t get any more out of it over my 3 wood.

    I will gladly try again with the Callaway though.

    • Hazen

      May 15, 2015 at 1:53 pm

      Forgot to mention the SLDR mini is not adjustable, and the fact that the Callaway Mini is, just makes it that much gooder. 🙂

  7. Rick

    May 15, 2015 at 10:52 am

    I believe they are available in 12 and 14 degrees of loft

    • Zak Kozuchowski

      May 15, 2015 at 10:56 am

      That is correct, Rick. The story has been corrected.

  8. Alex T

    May 15, 2015 at 10:31 am

    God I want one.

  9. CHRIS

    May 15, 2015 at 9:46 am

    Currently gaming the X2 Hot PRO 2deep as my driver. May have to give this a shot to see if it knocks it out of the bag.

  10. Desmond

    May 15, 2015 at 7:40 am

    Good looking stick!

Leave a Reply

Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Whats in the Bag

Steve Stricker WITB 2024 (April)

Published

on

Driver: Titleist TSR3 (9 degrees, C4 SureFit setting)
Shaft: Fujikura Motore Speeder VC 7.2 X

3-wood: Titleist 915F (13.5 degrees)
Shaft: Mitsubishi Tensei CK Pro White 80 TX

Hybrid: Titleist 816 H1 (17 degrees)
Shaft: Fujikura Motore Speeder VC 9.2 X

Irons: Titleist T200 (3, 4), Titleist T100 (5-9)
Shafts: Project X 6.5

Wedges: Titleist Vokey SM8 (46-10F @55), Titleist Vokey SM10 (54-10S @53), Titleist Vokey SM4 (60 @59)
Shafts: True Temper Dynamic Gold X100 w/Sensicore

Putter: Odyssey White Hot No. 2

Ball: Titleist Pro V1x

Grips: Golf Pride Tour Velvet Grip Rite

Check out more in-hand photos of Steve Stricker’s clubs here.

Your Reaction?
  • 12
  • LEGIT2
  • WOW0
  • LOL0
  • IDHT1
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

Whats in the Bag

Alex Fitzpatrick WITB 2024 (April)

Published

on

  • Alex Fitzpatrick what’s in the bag accurate as of the Zurich Classic. 

Driver: Ping G430 LST (10.5 degrees)
Shaft: Fujikura Ventus Black 6 X

3-wood: TaylorMade Qi10 (15 degrees)
Shaft: Fujikura Ventus TR Black 7 X

Hybrid: Ping G430 (19 degrees)
Shaft: Fujikura Ventus Black HB 10 TX

Irons: Ping iCrossover (2), Titleist T100 (4-PW)
Shafts: Fujikura Ventus Black HB 9 TX (2), Nippon N.S. Pro Modus 3 Tour 120 X (4-9)

Wedges: Titleist Vokey Design SM10 (50-12F, 56-12D, 60-08M)
Shafts: Nippon N.S. Pro Modus 3 Tour 120 X

Putter: Bettinardi SS16 Dass

Grips: Golf Pride MCC

Check out more in-hand photos of Alex Fitzpatrick’s clubs here.

Your Reaction?
  • 5
  • LEGIT0
  • WOW0
  • LOL0
  • IDHT1
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

Equipment

What’s the perfect mini-driver/shaft combo? – GolfWRXers discuss

Published

on

In our forums, our members have been discussing Mini-Drivers and accompanying shafts. WRXer ‘JamesFisher1990’ is about to purchase a BRNR Mini and is torn on what shaft weight to use, and our members have been sharing their thoughts and set ups in our forum.

Here are a few posts from the thread, but make sure to check out the entire discussion and have your say at the link below.

  • PARETO: “New BRNR at 13.5. Took it over to TXG (Club Champ but TXG will always rule) in Calgary for a fit. Took the head down to 12, stuck in a Graphite Design AD at 3 wood length and 60g. Presto- numbers that rivaled my G430Max but with waaaaay tighter dispersion. Win.”
  • driveandputtmachine: “Still playing a MIni 300.  The head was only 208, so I ordered a heavier weight and play it at 3 wood length.  I am playing a Ventus Red 70.   I play 70 grams in my fairways.  I use it mainly to hit draws off the tee.  When I combine me, a driver, and trying to hit a draw it does not work out well most of the time.  So the MIni is for that. As an aside, I have not hit the newest BRNR, but the previous model wasn’t great off the deck.  The 300 Mini is very good off the deck.”
  • JAM01: “Ok, just put the BRNR in the bag along side a QI10 max and a QI10 3 wood. A load of top end redundancy. But, I have several holes at my two home courses where the flight and accuracy of the mini driver helps immensely. Mine is stock Proforce 65 at 13.5, I could see a heavier shaft, but to normal flex, as a nice alternative.”

Entire Thread: “What’s the perfect Mini-Driver/Shaft combo? – GolfWRXers discuss”

Your Reaction?
  • 4
  • LEGIT1
  • WOW0
  • LOL0
  • IDHT1
  • FLOP0
  • OB0
  • SHANK4

Continue Reading

WITB

Facebook

Trending