Equipment
Cobra Fly Z, Fly Z+ and Fly Z Pro Irons
What do golfers really want from a new set of irons? More distance? More forgiveness? Better looks? Awesome feel? Before Cobra went about designing its new family of irons, its leadership wanted the answers from real golfers.
The consensus? Easy-to-hit irons were important, but feel also scored high in the minds of golfers. With that in mind, Cobra built the Fly-Z family of irons with a focus on feel.
Fly-Z Pro Irons
The Rickie Fowler’s.
If the Fly-Z Pro’s look like the AMP Cell Pro’s to you with a “Fly-Z” badge on them, that observation isn’t terribly far off. According to Cobra, Fowler loves his irons, and doesn’t want to change too much.
[quote_box_center]”Other irons feel crisp, ours feel soft,” Fowler says.[/quote_box_center]
There is one major difference between the AMP Cell Pro irons and the Fly-Z Pro’s, however, which better golfers will notice and tour professionals have had in their irons for years. The Fly-Z Pro’s have a tungsten screw in the toe, a trick that Rickie Fowler uses in his irons to move the center of gravity toward the center of the face, away from the heel.
To improve feel, Cobra uses a five-press forging process, giving the 1020 Carbon Steel forged irons consistent weight, texture and smooth feel throughout the set. They also have milled faces for spin control and small blade lengths with minimal offset — exactly what you’d expect from a tour-caliber iron.
The Fly-Z Pro’s employ a progressive flow-set design — from full muscle (9-PW), to single cavity in the 7-8 irons, to dual cavity in the 3-6 irons. A full set of muscleback irons can be ordered through Cobra’s custom department.
The Fly-Z Pro’s ($899, 3-PW) will be available March 1 and come stock with True Temper Dynamic Gold S400 shafts.
Fly-Z+ Irons
If the thought of blades scares you, but you’re a better player looking for a forged feel, the Fly-Z+ irons are a good iron to test.
The majority of complaints about last year’s Bio Cell+ irons were that they were clanky, clunky and clicky. Cobra took note, and decided to make some changes that will benefit feel players and add a bit more distance and forgiveness as well.
Cobra uses the same 5-press forging process in the Fly-Z+ irons — as well as the same 1020 Carbon Steel — to give them a softer, blade-like feel. There’s also an array of engineering improvements throughout the set for more forgiveness and control where golfers need it.
The mid-to-long irons (3-8) have milled undercuts behind the face to increase perimeter weighting, which leads to more forgiveness on off-center hits. The 3-7 irons have three tungsten weights in the toe and one in the heel to further improve forgiveness on mishits. The tungsten weights also move the center of gravity closer to the center of the face, which improves feel and energy transfer. To further improve feel, each iron has a thermoplastic urethane (TPU) insert with an aluminum backplate that reduces vibrations.
Fly-Z+ irons ($899, 3-PW) will be in stores March 1 and come stock with KBS’ Tour shaft.
Fly-Z Irons
Cobra’s Fly-Z irons have deep undercuts behind their face, creating a hollow-back design that improves ball speed (for more distance) and adds forgiveness.
The irons also have Cobra’s new Speed Channels on their soles and faces — you might recall them from the company’s Fly-Z driver and woods line — which help the club faces flex more at impact for more distance.
In order to dampen the sound and feel from the hollow-body construction, Cobra used a harmonic insert in the cavity behind the face.
The Fly-Z irons have the wide soles that are typical of game-improvement irons, but use thinner top lines, medium offset and a more compact shape than previous models for a better look at address.
Cobra also used what it calls progressive spin technology in the irons. The long irons (3-6) have V-grooves for more distance, while the shorter irons (7-PW) have U-shaped grooves for more spin.
The Fly-Z irons ($699, 4-PW) are available in Black, Blue, Orange, Red and White, and will be in retail stores on March 1. Combo sets that include Cobra’s Fly-Z hybrids are also available.
- LIKE227
- LEGIT57
- WOW47
- LOL12
- IDHT14
- FLOP4
- OB5
- SHANK20
Whats in the Bag
Taylor Pendrith’s winning WITB: 2024 CJ Cup Byron Nelson
Driver: Ping G430 LST (9 degrees) Buy here.
Shaft: Accra TZ Six ST
3-wood: Ping G430 Max (15 degrees) Buy here.
Shaft: Project X HZRDUS Smoke Green 80 6.5 TX
7-wood: Ping G425 Max (20.5 degrees) Buy here.
Shaft: Project X HZRDUS Smoke Green 90 6.5 TX
Irons: Srixon ZX (2, 3) Buy here, Srixon ZX7 Mk II (4-9) Buy here.
Shafts: Project X HZRDUS Smoke Black 6.5 90, 6.5 100 (2-3), True Temper Dynamic Gold Tour Issue X100
Wedges: Cleveland RTX 6 Tour Rack (46-10 Mid, 52-10 Mid, 56-10 Mid, 60-9 Full) Buy here.
Shafts: True Temper Dynamic Gold Tour Issue X100
Putter: Odyssey Jailbird Versa Buy here.
Grip: SuperStroke Zenergy Flatso 1.0
Grips: Golf Pride MCC
The winning WITB is presented by 2nd Swing Golf. 2nd Swing has more than 100,000 new and pre-swung golf clubs available in six store locations and online. Check them out here.
- LIKE9
- LEGIT0
- WOW0
- LOL1
- IDHT0
- FLOP0
- OB0
- SHANK0
Whats in the Bag
Ben Kohles WITB 2024 (May)
Driver: Titleist TSR3 (9 degrees, D1 SureFit setting)
Shaft: Fujikura Ventus Blue 6 X
3-wood: TaylorMade Stealth Plus (15 degrees)
Shaft: Fujikura Ventus Blue 8 X
Hybrid: Titleist TSR3 (19 degrees, D1 SureFit setting)
Shaft: Fujikura Ventus Blue HB 9 X
Irons: Titleist T200 (4, 5), Titleist 620 CB (6-9)
Shafts: Project X 6.0
Wedges: Titleist Vokey Design SM10 (46-10F, 50-12F, 54-12D, 60)
Shafts: Project X 6.0
Putter: Scotty Cameron P5 prototype
Grips: Golf Pride Tour Velvet
Ball: Titleist Pro V1
Check out more in-hand photos of Ben Kohles’ clubs in the forums.
- LIKE10
- LEGIT0
- WOW0
- LOL3
- IDHT0
- FLOP0
- OB0
- SHANK0
Whats in the Bag
Kris Kim WITB 2024 (May)
- Kris Kim what’s in the bag accurate as of the CJ Cup Byron Nelson. More photos from the event here.
Driver: TaylorMade Qi10 (9 degrees @7)
Shaft: Mitsubishi Tensei 1K White 60 TX
3-wood: TaylorMade Qi10 Tour (15 degrees @13.5)
Shaft: Mitsubishi Diamana WB 73 TX
Irons: TaylorMade P770 (2, 4), TaylorMade P7MB (5-PW)
Shafts: Mitsubishi Tensei 1K White 80 TX (2), Nippon N.S. Pro Modus3 Tour 120 X
Wedges: TaylorMade MG4 (50-09SB, 56-12SB, 60-11TW)
Shafts: Nippon N.S. Pro Modus3 WV 125
Putter: TaylorMade Spider Tour
Grips: Golf Pride Tour Velvet Cord
Check out more in-hand photos of Kris Kim’s equipment here.
View this post on Instagram
- LIKE4
- LEGIT0
- WOW0
- LOL0
- IDHT0
- FLOP0
- OB0
- SHANK0
-
19th Hole2 weeks ago
Justin Thomas on the equipment choice of Scottie Scheffler that he thinks is ‘weird’
-
19th Hole2 weeks ago
‘Absolutely crazy’ – Major champ lays into Patrick Cantlay over his decision on final hole of RBC Heritage
-
19th Hole3 weeks ago
Report: LIV Golf identifies latest star name they hope to sign to breakaway tour
-
19th Hole3 weeks ago
Neal Shipley presser ends in awkward fashion after reporter claims Tiger handed him note on 8th fairway
-
19th Hole3 weeks ago
Brandel Chamblee has ‘no doubt’ who started the McIlroy/LIV rumor and why
-
19th Hole1 week ago
LET pro gives detailed financial breakdown of first week on tour…and the net result may shock you
-
Equipment3 weeks ago
Jason Day on his recent switch into Srixon ZX5 and ZX7 Mk II irons
-
19th Hole4 days ago
Gary Player claims this is what ‘completely ruined’ Tiger Woods’ career
M-Herd4
Feb 19, 2016 at 3:50 pm
Just switched from Ping S55’s to the FLY-Z’s and couldn’t be happier. I needed something a little more forgiving and I got it. So impressed that I ended up replacing my entire bag of Ping’s with Cobra’s for this year. They look better, feel better, sound better, and launch better. I’m excited for the season to start!
Scott
Oct 2, 2015 at 9:45 pm
Not a huge cobra fan but the fly z pros look unreal so figured I had to try them out, currently rocking 712 CB/mb combos. Went to local golf town to try the new 716’s and these fly z pros.WOW! These clubs are pure!!! Best feeling irons I’ve ever felt, forgiving, long and the weight differential is perfect. Didn’t think it would ever happen but Can’t wait to pick up a set during Christmas! Good job cobra
tom
Jan 31, 2015 at 4:21 pm
When are the fly z+ irons going to be available?
Flow
Feb 2, 2015 at 11:47 am
@tom I believe March 1st.
Flow
Jan 30, 2015 at 10:05 am
I hit the Z+ irons at the PGA Show last week and they are real nice! I have the AMP Forged Irons and love them. The Z+ irons have a slightly thinner top line and were carrying 5-7 yards further then my AMP’s. I will be updating this spring!!!
Jonny B
Jan 29, 2015 at 2:53 pm
I sure hope these feel better than the Bio Cell+ irons I demoed last year. Almost had to have wrist surgery after a couple mishits on those suckers.
Horror
Jan 29, 2015 at 2:28 am
What is that, an inverted cone? The horror!
Bob
Jan 28, 2015 at 1:56 pm
The pro model looks really great. I play 714 AP2’s now can you compare the forgiveness to the ap2’s
ck
Jan 28, 2015 at 1:10 pm
Jason-you can typically order sets in any combination you desire through the Cobra Custom dept.
Your local golf shop that carries Cobra Puma products should be able to help you.
Jason
Jan 28, 2015 at 12:51 pm
These look like a great iron, haven’t hit Cobra irons but I love my bio cell 3 wood and hybrid. I would really love it if sets configured 5-A wedge were offered, I have no need for a 3 or 4 iron in my set of irons and I would think with the ease of hitting hybrids most people would agree. This would make the sets cheaper and I would be able to upgrade more often and for better prices.