Connect with us

Equipment

Tour equipment junkies rejoice! TaylorMade opens “The Vault”

Published

on

Last year, we discussed TaylorMade not selling the equipment that its professional staff use on Tour. And if you’re a GolfWRX forum junkie, you’ve likely seen this topic debated for years on our site.

Well, for those of you looking to get your hands on legitimate tour-issued clubs directly from TaylorMade, the wait is over. Or, more precisely, the wait has begun to see what the TaylorMade Vault holds.

The Vault (accessible here) is essentially an online store within the TaylorMade website. At undefined intervals, the company will release a limited amount of tour equipment.

As TMag’s website states:

The Vault holds rare, and collectable TaylorMade equipment you don’t come across every day. We’re talking about prototypes, limited-runs, one-offs and the occasional custom-build for a Tour pro. Most were built in our Tour Department in Carlsbad, California or our rolling, 18-wheel workshop that travels the PGA Tour. Quantities are always limited, so check back often and act fast.

So, that’s what The Vault is in theory. Let’s take a look at what it has looked like (and will continue to look like) in practice.

The Carlsbad-based company has already released an ATV prototype wedge and a very cool Ghost Tour prototype Monte Carlo 72 comparable to the model Jason Day used to win the WGC-Accenture Match Play earlier this year.

Upcoming releases include the following.

SLDR Tour Head: April 8

The head is lighter in weight than the standard SLDR, allowing a player to keep the club’s total weight down when using a heavier shaft. It appears price for this head has not yet been determined.

Screen shot 2014-03-25 at 9.28.02 AM

R1 V2 TP Head: April 1: $300

Again, like the SLDR head, the R1 head is lighter in order to accommodate a tour spec shaft. Screen shot 2014-03-25 at 9.29.14 AM

Itsy Bitsy Tour Prototype Putter: April 1: $350

As TMag’s Vault page indicates, “It’s not often a putter comes to you straight from the TaylorMade Tour department, and this face-balanced beauty is as rare as it is distinct in design.”

Screen shot 2014-03-25 at 9.32.43 AM

Tour Preferred MC Onset Irons (2011): Available Now: $1,200

When TaylorMade released the TP MC in 2011, Tour pros love the feel and workability of the club, however, as the company states, “a number of pros made a request: Give us the same head minus the offset.” Here is the result, available for your purchase.

Screen shot 2014-03-25 at 9.33.47 AM

TaylorMade junkies and lovers of all things tour issue will be champing at the bit to see what comes out of The Vault next, to be sure.

Your Reaction?
  • 17
  • LEGIT1
  • WOW0
  • LOL2
  • IDHT0
  • FLOP2
  • OB1
  • SHANK2

GolfWRX Editor-in-Chief

21 Comments

21 Comments

  1. KK

    Sep 6, 2015 at 11:51 am

    Honestly, looks like mostly old tour stuff gathering dust that TM wants to unload. But hey, more options is a good thing for golfers.

  2. Larry

    Mar 29, 2014 at 6:27 am

    A few years ago on Vacation in Vegas I was playing with 3 young men that were all hitting the same driver…on the 16 hole they ask me if I would like to hit their driver…. it was a tour van (kids brother worked for Taylormade) made driver, when he handed it to me I could feel the most balanced club I ever felt…swing easy I was told and again wow, yes even a duffer like me could feel and see a huge difference… if you ever get a chance to hit a real “tour” club you will see we are buying some real junk off the rack….

  3. Mad-Mex

    Mar 26, 2014 at 10:17 pm

    So riddle me this Batman,,,,,,,,,,,, this equipment wont do me a bit of good unless,,,,my swing matches what this equipment was built for? And second, unlike other equipment, value will just,,,,,drop and become nothing more than a “look what I got” conversation piece?

    Please enlighten me if I am way off,,,,,,,,

  4. Nick

    Mar 26, 2014 at 4:42 pm

    If they actually begin to catch up to more current equipment, which it seems they are getting closer with the latest release of the SLDR coming, this will be very intriguing. If they continue to be months and even years behind the actual release it’s a total waste of everyone’s time.

  5. Charlie

    Mar 26, 2014 at 4:41 pm

    You guys are forgetting tour issue stuff on the black market has zero warranty. Hopefully with these prices full warranty will be in effect!

  6. LorenRobertsFan

    Mar 26, 2014 at 4:14 pm

    This will be a fail. Anyone who pays $1300 for TM irons is crazy, and this stuff is so much cheaper to buy elsewhere. And most of these are old models? That’s a slap in the face by a company that always tell us that their latest and greatest is so much better than previous models

  7. Double Mocha Man

    Mar 26, 2014 at 3:44 pm

    Just bought a tour-issue, COR tested Taylormade driver off ebay.

    • leftright

      Mar 27, 2014 at 11:26 am

      Buy an Adams XTD and save money. Better driver, better quality and more technology. Heck, Justin Honea from Adams is the guy behind SLDR anyway. Best business decision in golf was TM buying Adams and the only reason TM has a slot in it’s club. Adams owns that patent for 17 years.

      • John

        Mar 31, 2014 at 9:59 am

        I agree it was a good idea, it puts a quality manufacturer behind a quantity manufacturer…where you’re slightly off though is the patent…I’m not sure how long they hold the patent for the slot, but it is irrelevant…companies can license that technology from them if they like, in some cases without a licensing contract…the reason other companies don’t is because there are better ways to maximize COR in metal woods, so the rest if the industry is allowing tmag/Adams to have that as their “claim to fame” because it doesn’t really provide any real benefits that others can achieve in other ways…taylormade/Adidas is a global marketing company first, golf oem second….they market the crap out of their equipment so that you (hypothetically) buy their stuff before you even hit it…someone gains one yard on a drive, they say to themselves “oh well I’m not that good so I can’t expect a whole 17 yards everytime, so I’ll take it!!!” Then they’re taylormade suckers for life…I used to work in the industry, and my god do I wish I could tell you all the cost to taylormade of manufacturing one club, it would blow your minds…btw I am no taylormade hater, I’ve used an r9 3 and 5 wood since they came out, and a couple drivers since, I just like understanding how things work and made it a point to figure out the hype behind taylormade, as well as the “haters” because I hear the word “fanboy” religiously on this site and it makes me cringe everytime I hear it mostly because it just sounds childish and dumb, but they are “fanboys” because taylormade molded them that way, consciously or subconsciously, they were dooped into brand loyalty for the wrong reasons…”Sweet, now I can by the same club DJ plays?!”…gets out credit card and pays $60o for a stock “tour club”…there is no difference other than they spend more time balancing the club and hotmelting the face, both of which have always been available to the public if you get a real custom fit

  8. Rich

    Mar 26, 2014 at 12:45 pm

    Played TM at one time till I found out from a TM endorsed player that my “tour” irons weren’t even made of the same steel let alone the same design. Was I naive, absolutely. But coming from the tennis world where the equipment is the same construction for the same model, that was completely unacceptable. This isn’t a surprise move. TM has always had a “we know what’s best for you and it happens to be more profitable” stance on equipment. “But we’ll paint them white so they’ll feel like pros.”

    • johnleg

      Mar 27, 2014 at 7:11 pm

      every company does that, derp.

    • KK

      Sep 6, 2015 at 11:49 am

      Just because someone has an equipment endorsement doesn’t mean he suddenly becomes an equipment engineer and expert. The vast majority of pros choose equipment based on feel and ball flight and know/care very little about the tech because honestly, it doesn’t matter all that much to their games. Pro V1X, DG X100, blades or AP2/AP2 equivalent, Scotty or Odyssey, TM/Titleist/Ping driver. Bam, that’s like 98% of all PGA wins. The different is in the fitting. Most guys are too cheap to go for a normal fitting. I doubt they (or you) would pony up for a tour fitting which is probably worth a few grand at least. And you don’t have a pro’s game. Why do you even want the exact same equipment that pros play?

  9. Gerard

    Mar 26, 2014 at 6:15 am

    Would love to see the comments change tune if a Titleist or a Ping did this…

    • Mike

      Mar 27, 2014 at 4:42 am

      of course they do, we’d be naive to think they didn’t.

  10. Chuck

    Mar 25, 2014 at 10:24 pm

    Bookmarked.

  11. Curt

    Mar 25, 2014 at 6:53 pm

    Come on TM. Dont put left over, old product, in the Vault. It has to be current for this to be of value to the consumer, otherwise, its just a BS way to capitalize on stuff that cant be used by pros or TMAG.
    Only newbie idiots will fall for that BS……………

  12. steve

    Mar 25, 2014 at 4:43 pm

    Seems like this is not current tour issued equipment, except for the sldr

  13. Blake

    Mar 25, 2014 at 4:29 pm

    I think this is great. I have been gaming r9 460 and r9 supertri tour issue heads for a year now (i switch back and forth between 8.5 and 10.5 degrees of loft depending on conditions). I can definitively say my tour issue heads spin significantly less than the retail r9 heads I previously owned. My swing weights also feel much better with the tour issue heads given i was fit for a 77 gram vts shaft. Tour issue heads aren’t for everyone but can make a big difference in the right person’s bag.

  14. mike

    Mar 25, 2014 at 4:16 pm

    seems to me like they’re just pushing clubs that are left over tour issue models

  15. Dumb

    Mar 25, 2014 at 3:24 pm

    WOW. I can pay double for pretty much the exact same product.

  16. J

    Mar 25, 2014 at 2:25 pm

    Overpriced equipment that can be had for cheaper on the street.

    Bravo.

Leave a Reply

Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Whats in the Bag

Richy Werenski WITB 2024 (May)

Published

on

  • Richy Werenski what’s in the bag accurate as of the CJ Cup Houston Open.

Driver: Titleist TSR3 (10 degrees, D1 SureFit setting)
Shaft: Mitsubishi Diamana PD 60 TX

3-wood: Titleist TSR2 (15 degrees, A1 SureFit setting)
Shaft: Fujikura Ventus Red 8 X

Hybrid: Titleist TSR3 (19 degrees, D1 SureFit setting)
Shaft: Mitsubishi Tensei CK Pro White Hybrid 90 TX

Irons: Titleist T100 (4-9)
Shafts: Nippon N.S. Pro Modus3 Tour 105 S

Wedges: Titleist Vokey Design SM9 (46-10F, 50-12F), Titleist Vokey Design WedgeWorks Proto (54-M, 58-L @60)
Shafts: True Temper Dynamic Gold Tour Issue X100 Onyx (46-50), True Temper Dynamic Gold Tour Issue S400 Onyx (54-60)

Putter: Scotty Cameron prototype

Ball: Titleist Pro V1x Left Dash

Grips: Golf Pride ZGrip Cord

Check out more in-hand photos of Richy Werenski’s clubs in the forums.

Your Reaction?
  • 1
  • LEGIT0
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

Equipment

Adam Scott testing green “Masters Use Only” putter + 6 interesting equipment photos from the 2024 CJ Cup Byron Nelson

Published

on

Welcome to the 2024 CJ Cup Byron Nelson event at TPC Craig Ranch in McKinney, Texas, which, for your geographical reference, is about 25 minutes from Dallas.

In early-week equipment news, we saw some interesting putter testing from Adam Scott, a Maxfli golf ball signing on the PGA Tour, a 16-year-old’s WITB, a PGA Tour player using another PGA Tour player’s backup putter, and Jordan Spieth weighed in on why he recently switched out just his 7-iron (and then made a hole-in-one with it).

With so much to report and so little time to waste on the intro, let’s get right into this week’s equipment rundown from the CJ Cup Byron Nelson.

See all of our photo galleries from the week here 

Adam Scott’s new L.A.B. putters

Before we get into a couple of the new prototypes Scott has been testing, above is a photo of the L.A.B. Golf Mezz.1 Max prototype putter that he’s been using, and will likely continue to use this week in Texas.

That being said, following the Masters, Scott was looking to try a couple putters with a slightly lighter weight to help with his feel on fast greens.

One of the new prototypes we spotted on Tuesday was a L.A.B. Golf DF3 “Proto 2.1”, custom-built with Scott’s preferred blue colorway, and an Australia-inspired Kangaroo laser engraving…

We also spotted him with a green-colored “For Masters Use Only” Mezz.1 Max prototype…

While it’s unlikely Scott will make a switch this week, it’s certainly something to keep an eye on going forward, especially on courses with faster greens.

We also got a peek into Scott’s full WITB this week, which consists of a super-mixed set of Srixon irons, including a ZX Utility 3-iron, a ZX-5 MkII 4-iron, ZX-7 MkII mid-irons (5-7) and Z Forged II short irons (8-9).

See Scott’s full WITB from the CJ Cup here

An update on Daniel Berger’s Odyssey Jailbird

Last week in New Orleans, we highlighted Daniel Berger’s Ai-One Jailbird Mini putter because of its unique sightlines.

Well, we have an update.

According to Callaway Tour Manager Joe Toulon, who spoke with GolfWRX.com this week, Berger’s Jailbird Mini is actually from fellow Tour player Tom Kim’s stash. Kim is a prolific putter tester, and the exact putter Berger is currently using was actually originally made for and tested by Kim. The putter didn’t make it into Kim’s starting lineup, however, so he gave the putter back to Odyssey, and it eventually made it’s way onto Berger’s gamer roster.

Jordan Spieth’s new 7-iron

As the story goes, Jordan Spieth changed out his Titleist T100 7-iron on Wednesday before the 2024 Valero Texas Open, and then on Thursday, he used the 7-iron to make a hole-in-one from 199 yards on the 16th hole.

Good timing on that switch, Jordan.

On Tuesday at the 2024 CJ Cup Byron Nelson, GoflWRX.com caught up with Spieth to get the full story on why he switched just the 7-iron.

Our full story is over on PGATOUR.com’s Equipment Report, but here’s a snippet of what Spieth had to say:

“I hit my 7-iron a lot, especially on my own. The spin rates, relative to my 6-iron and my 8-iron, were lower, so it was going too far. I was trying to figure out why, if it was something in the makeup of the iron. I got the lies and the lofts checked, and everything was fine. So finally I was like, ‘Can I just get a new one and see if it fixes it?’

“Maybe there was one other time throughout my career where I changed just one iron, so it’s very unusual. I think it’s just because the grooves were worn down from hitting it too much.”

Ben Griffin signs with Maxfli to play the golf ball

At the beginning of the year, LPGA Tour star Lexi Thompson signed a deal with Maxfli to play the company’s golf ball, and now, Griffin has officially joined team Maxfli, as well, thus expanding the company’s Tour presence.

GolfWRX.com caught up with Griffin on Wednesday in Texas for a video interview about his new golf ball of choice, and how he marks it…

 

View this post on Instagram

 

A post shared by GolfWRX (@golfwrx)

A 16-year-old is playing on the PGA Tour this week, using a 2-iron!

Amateur golfer Kris Kim, at just 16 years of age, is making his PGA Tour debut this week after receiving a sponsors exemption into the event. In 2023, Kim won both the R&A Boys’ Amateur Championship and the European Boys’ International Championship.

On Tuesday in Texas, we got a look into Kim’s bag, which revealed that he’s currently playing a TaylorMade P-770 2-iron, and a bag full of TaylorMade clubs.

Check out Kim’s full WITB here

A smart golf ball stamping

I’m not going to sit here and pretend to be a big math guy, because I’m not. However, I do recognize David Nyfjall’s purple ball marking as a square root symbol.

While I don’t know the particular significance of the square root symbol for Nyfjall, I do know you have to be fairly intelligent to even consider using a marking like that. Pretty cool stuff from the Northwestern alum, and 2023 Byron Nelson Award winner.

And, with that, we say goodbye to Texas and TPC Craig Ranch. We’ll see you next week at the Wells Fargo Championship in Charlotte for more insider equipment news and storylines.

For now, don’t forget to check out all of our photos from the 2024 CJ Cup Byron Nelson

Your Reaction?
  • 1
  • LEGIT0
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

Whats in the Bag

Wesley Bryan WITB 2024 (May)

Published

on

  • Wesley Bryan what’s in the bag accurate as of the CJ Cup Byron Nelson.

Driver: Callaway Paradym Ai Smoke Triple Diamond Max (9 degrees @10)
Shaft: Mitsubishi Diamana GT 50 TX

3-wood: TaylorMade Stealth Plus (15 degrees)
Shaft: Mitsubishi Diamana GT 60 X

Hybrid: TaylorMade Stealth 2 Plus Rescue (19.5 degrees)
Shaft: Fujikura Ventus HB Blue 8 X

Irons: Titleist T200 (4), Takomo 101U (4), Takomo 101T (5), Takomo 301 CB (6-9)
Shafts: True Temper Dynamic Gold Tour Issue X100

Wedges: Titleist Vokey Design SM10 (46-10F, 52-08F, 56-14F), Titleist Vokey Design WedgeWorks Proto (58-A)
Shafts: True Temper Dynamic Gold Tour Issue S400

Putter: L.A.B. Golf DF3

Grips: SuperStroke, Golf Pride Tour Velvet

Ball: Titleist Pro V1x

More photos of Wesley Bryan’s WITB in the forums.

Your Reaction?
  • 3
  • LEGIT1
  • WOW1
  • LOL1
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

WITB

Facebook

Trending