Equipment
Spotted: TaylorMade SLDR 430 TP Japan driver
There has been a lot of chatter in our forums over the past couple of days about the addition of a TaylorMade SLDR 430 TP to the USGA’s list of conforming clubs. Let the chatter continue, because look what just showed up on the TaylorMade Japan website!
According to the TaylorMade Japan website, the head features a 2-gram-heavier SLDR weight that the standard SLDR 460 driver. That change is made possible by the SLDR’s smaller (and thus lighter) lighter 430-cubic-centimeter head.
Much like the SLDR 460, the SLDR 430 allow golfers to choose from 12 positions on TaylorMade’s “Loft Sleeve” within a range of plus-or-minus 1.5 degrees of loft change in 0.5-degree increments to help golfers dial in their launch and spin.
Click here to read our review of TaylorMade’s SLDR 460 driver.
The SLDR 430 has the same crown graphics as the original, but the sole is charcoal-gray, applying the 460’s crown color to the entirety of the club. And of course, there’s the “Tour Preferred” badging loyalists have been clamoring for on the toe of the club. It’s not the original TaylorMade TP logo loyalists wanted, but it’s better than nothing, right?
Speculation has abounded as to whether the SLDR 430 TP will be available in the U.S. However, with the upcoming release of TaylorMade’s Tour Preferred Irons and with pros rumored to be testing the SLDR 430 TP, it seems likely that a U.S. release is in the cards.
Here are the specs and shaft options from the TaylorMade Japan website.
A look at the darker, more compact face of the SLDR 430 TP.
Here’s a look at the crown of the club, which is very similar to the 460 version.
- LIKE26
- LEGIT4
- WOW6
- LOL1
- IDHT2
- FLOP1
- OB2
- SHANK7
Whats in the Bag
Steve Stricker WITB 2024 (April)
- Steve Stricker WITB accurate as of the Zurich Classic. More photos from the event here.
Driver: Titleist TSR3 (9 degrees, C4 SureFit setting)
Shaft: Fujikura Motore Speeder VC 7.2 X
3-wood: Titleist 915F (13.5 degrees)
Shaft: Mitsubishi Tensei CK Pro White 80 TX
Hybrid: Titleist 816 H1 (17 degrees)
Shaft: Fujikura Motore Speeder VC 9.2 X
Irons: Titleist T200 (3, 4), Titleist T100 (5-9)
Shafts: Project X 6.5
Wedges: Titleist Vokey SM8 (46-10F @55), Titleist Vokey SM10 (54-10S @53), Titleist Vokey SM4 (60 @59)
Shafts: True Temper Dynamic Gold X100 w/Sensicore
Putter: Odyssey White Hot No. 2
Ball: Titleist Pro V1x
Grips: Golf Pride Tour Velvet Grip Rite
Check out more in-hand photos of Steve Stricker’s clubs here.
- LIKE27
- LEGIT2
- WOW0
- LOL1
- IDHT1
- FLOP0
- OB0
- SHANK1
Whats in the Bag
Alex Fitzpatrick WITB 2024 (April)
- Alex Fitzpatrick what’s in the bag accurate as of the Zurich Classic.
Driver: Ping G430 LST (10.5 degrees)
Shaft: Fujikura Ventus Black 6 X
3-wood: TaylorMade Qi10 (15 degrees)
Shaft: Fujikura Ventus TR Black 7 X
Hybrid: Ping G430 (19 degrees)
Shaft: Fujikura Ventus Black HB 10 TX
Irons: Ping iCrossover (2), Titleist T100 (4-PW)
Shafts: Fujikura Ventus Black HB 9 TX (2), Nippon N.S. Pro Modus 3 Tour 120 X (4-9)
Wedges: Titleist Vokey Design SM10 (50-12F, 56-12D, 60-08M)
Shafts: Nippon N.S. Pro Modus 3 Tour 120 X
Putter: Bettinardi SS16 Dass
Grips: Golf Pride MCC
Check out more in-hand photos of Alex Fitzpatrick’s clubs here.
- LIKE12
- LEGIT0
- WOW1
- LOL1
- IDHT1
- FLOP0
- OB0
- SHANK0
Equipment
What’s the perfect mini-driver/shaft combo? – GolfWRXers discuss
In our forums, our members have been discussing Mini-Drivers and accompanying shafts. WRXer ‘JamesFisher1990’ is about to purchase a BRNR Mini and is torn on what shaft weight to use, and our members have been sharing their thoughts and set ups in our forum.
Here are a few posts from the thread, but make sure to check out the entire discussion and have your say at the link below.
- PARETO: “New BRNR at 13.5. Took it over to TXG (Club Champ but TXG will always rule) in Calgary for a fit. Took the head down to 12, stuck in a Graphite Design AD at 3 wood length and 60g. Presto- numbers that rivaled my G430Max but with waaaaay tighter dispersion. Win.”
- driveandputtmachine: “Still playing a MIni 300. The head was only 208, so I ordered a heavier weight and play it at 3 wood length. I am playing a Ventus Red 70. I play 70 grams in my fairways. I use it mainly to hit draws off the tee. When I combine me, a driver, and trying to hit a draw it does not work out well most of the time. So the MIni is for that. As an aside, I have not hit the newest BRNR, but the previous model wasn’t great off the deck. The 300 Mini is very good off the deck.”
- JAM01: “Ok, just put the BRNR in the bag along side a QI10 max and a QI10 3 wood. A load of top end redundancy. But, I have several holes at my two home courses where the flight and accuracy of the mini driver helps immensely. Mine is stock Proforce 65 at 13.5, I could see a heavier shaft, but to normal flex, as a nice alternative.”
Entire Thread: “What’s the perfect Mini-Driver/Shaft combo? – GolfWRXers discuss”
- LIKE6
- LEGIT1
- WOW0
- LOL0
- IDHT2
- FLOP1
- OB0
- SHANK7
-
19th Hole3 weeks ago
Dave Portnoy places monstrous outright bet for the 2024 Masters
-
19th Hole6 days ago
Justin Thomas on the equipment choice of Scottie Scheffler that he thinks is ‘weird’
-
19th Hole3 weeks ago
Tiger Woods arrives at 2024 Masters equipped with a putter that may surprise you
-
19th Hole6 days ago
‘Absolutely crazy’ – Major champ lays into Patrick Cantlay over his decision on final hole of RBC Heritage
-
19th Hole2 weeks ago
Two star names reportedly blanked Jon Rahm all week at the Masters
-
19th Hole2 weeks ago
Report: LIV Golf identifies latest star name they hope to sign to breakaway tour
-
19th Hole2 weeks ago
Neal Shipley presser ends in awkward fashion after reporter claims Tiger handed him note on 8th fairway
-
19th Hole2 weeks ago
Brandel Chamblee has ‘no doubt’ who started the McIlroy/LIV rumor and why
jc
Dec 23, 2013 at 7:17 pm
I got a top secret version of the badge and put it on my G25…wow, another 45 yards instantly!!!
it went so far, the usga banned the badge on other maker’s clubs…
it went so far, the FAA banned me from hitting driver near airports…
ams165
Dec 15, 2013 at 11:32 pm
Just saw on Golfdiscount.com that the 430 TP version is shipping on Dec 20th. They are taking pre orders…
http://www.golfdiscount.com/taylormade-sldr-430-tp-tour-driver
Fsubaseball
Dec 9, 2013 at 6:05 am
The new “TP” irons can be found on the same taylormade Japan website.. They used to have black carbon ATV wedges as well as different color options on spiders. The prices are insane!
Moo
Dec 8, 2013 at 12:57 pm
Wow, Can’t wait to get one of these, and I really wasn’t looking for a new driver. But with the compact head, lighter swing weight and the 45″ shaft, it’s everything I wanted from TM. I’ve been hitting my RBZ Tour well but I’m tiring of the big white blob at the end of a long stick look:) A partial effect of playing a 3Deep off the tee recently. Can I repeat the 45″ thing!!! 46″ shafts for amateurs is just plain stupid. Really hate to have to cut down a shaft with no OEM way to adjust the swingweight. Just hoping these are not Japan only specs… And I just have to mention the goofy badge thing. The new look is way better.
Peter A
Dec 4, 2013 at 4:09 pm
Tried out the 430 yesterday. Averaged 200 rpm less on spin numbers. This driver is going to be a runaway hit for high spin players, especially with the Speeder in it.
Dan
Dec 4, 2013 at 2:11 pm
TMag, get something right here and you will happen to get more and more of your TP loyalists back…if that damn badge is not on the side of the club, that is an issue! If your re-create the badge, want to “re-brand” your TP line, THEN DO IT WITH THE BADGE! Get it right, quit teasing us with “prototypes that did not make the final production”. Thats garbage, to be honest. I do not like to rip apart what I feel is the greatest company in constructing ground-breaking drivers, but give us consumers what we want FOR ONCE!
snowman
Dec 4, 2013 at 3:52 pm
Agree..Why the H— won’t TMAG bring back the damn badge that all the players love? This “Tour Preferred” nonsense looks like something from Spalding in the 70’s
Jon
Dec 5, 2013 at 12:30 am
But dan will the badge lower your scores? Do you buy a club because of cosmetics, or because of the performance?
Pricey
Dec 4, 2013 at 1:40 pm
But how much……..? $699 with TP shaft upgrade? Ya gotta be kidding me. Ya might as well go find a R9 T stamp or R11S T stamp on Ebay you’ll hit those just as good
Tyler
Dec 4, 2013 at 1:44 pm
Or just wait a few months and buy one for half the price.
Holdma Deeek
Dec 4, 2013 at 5:15 pm
You should wait a few months and Holdma Deeek
Bob R
Dec 5, 2013 at 4:54 pm
HAHAHAHAHHAHA^^^
totebagger
Dec 6, 2013 at 11:32 am
sip the the TM koolaid and holdma deek you totebaggers
Conrad
Dec 4, 2013 at 1:04 pm
looks great
Carter
Dec 4, 2013 at 12:32 pm
This looks exactly like my new driver. haha
Andrew
Dec 4, 2013 at 12:29 pm
That is a very, very nice looking club.
Big_5_Hole
Dec 4, 2013 at 11:57 am
This is one driver I’ll be testing this spring. I liked but didn’t love the first SLDR, this might be the one……
Jay
Dec 4, 2013 at 11:14 am
I don’t get the obsession with having the TP logo on everything. Who cares? Isn’t it about how it performs anyway? I could care less about trying to impress my friends with little logo’s but would rather hit it by them 30yds.
KCCO
Dec 8, 2013 at 2:27 pm
Like the all charcoal, could careless about badge….just hope TMAG sticks a small head driver to retail shelf, sick of huge 460’s
markb
Dec 4, 2013 at 11:00 am
Looks like it still has the glued on toe plate cover that kept falling out on the regular models and had to be screwed in on tour drivers. Did they change the glue?
Tyler
Dec 4, 2013 at 10:53 am
Why does TM release different clubs in Japan?
christian
Dec 5, 2013 at 6:35 am
This driver will probably come to the US market as well, but otherwise TM, Callaway, Titleist, Cleveland have whole lines of JDM only clubs. Usually forged, usually pricey. It’s because the golf eqipment market in Japan is double the size of the US one with less than half the population. Brands bring out their most “premium” stuff in Japan, and then they might release a watered down version a couple of years later in the US market. Or sometimes, as in the case of the Anser line from Ping, interest is so great in the US that they will offer the JDM stuff (Anser Forged irons) in the US too. And as a thank you the then get clobbered with negative comments about being “insanely expensive”.
Nattysurf
Dec 6, 2013 at 3:26 am
Japan golf equipment market is not even close to being 2X the US – it is less than 50% of the US.
hebron1427
Dec 6, 2013 at 5:23 pm
probably true, but the prices that japanese consumers will pay for similar products is astronomical.
Scott F
Dec 4, 2013 at 10:30 am
that all black 430 SLDR is niceeee looking they should’ve did the TP badge though. Why not listen to the golfers here who are your ultimate focus group? 90% or so would say go with badge on TP. Love the looks of the MC and Im not a TM player. Glad to see that TM finally figured out that golfers don’t want white clubs or NASCAR graphics or dials that no one can figure out.
Mike
Dec 4, 2013 at 10:26 am
This will be available in the US…
Keith
Dec 4, 2013 at 9:25 am
Oh I want one so bad, if this is anything like the 460 it is going to be the best of 2014! It would be awesome if they would let us get our hands on this gorgeous black one too, Com’on Tmag you can do that for us!
John
Dec 4, 2013 at 8:53 am
Take away crown graphics and put tp logo instead… Bam, instant perfection.
Patrick
Dec 4, 2013 at 8:50 am
When will it be hitting shelves in the states?
Xerpro
Dec 4, 2013 at 8:33 am
Sign me up….Might be the one that can knock out the original SFTP.
All Black looks awesome!!!