Equipment
Miles of Golf: A Top-100 Golf Shop
Miles of Golf Named Top 100 Golf Shop for 13th Consecutive Year. 1999-2012 Golf World Top 100 Golf Shop. Each year, Golf World recognizes the Top 100 Golf Shops in the country. In 2012, Miles of Golf was once again named to the list. That makes it 13 straight years that Miles of Golf has been voted in the Top 100. They have also won other prestigious awards over the years. Here is the list:
-2008 Ping National Club Fitter of the Year. This was the first time an off-course golf shop has won this award.
-1998, 1999, 2006 Ping Regional Club Fitter of the Year.
-2007, 2008, 2009, 2010 Titleist Regional Fitting Center. There are only five of these centers in the country.
-1998-2010 GRAA Top 100 Golf Range.
GolfWRX happens to be located near the shop and thought readers would be interested in seeing a closer look at the shop.
Click here to see all the photos and read the discussion in the forums
Equipment- 10,000 square foot golf shop has been a Golf World Best 100 Shop since 1999. The golf shop is a large, high volume, shop that carries all the major club brands plus quality starter and intermediate sets. They also have an extensive inventory of accessories and golf apparel. Having a well-trained and knowledgeable staff in the industry, MOG feel confident that they can assist in your quest to become a better player. MOG does not allow manufacturers to pay our staff to promote their products. They feel this would interfere with their ultimate job – finding the right equipment and golf gear for you.
Club Fitting Cluboratory- they are recognized as one of the elite club fitting shops in the country. thier fitting and testing center, the Cluboratory, is equipped with over $200,000 of demo equipment including 3 TrackMan radar ball flight monitors. The Cluboratory is heated and protected from the elements yet allows the customer and club fitter to see the full flight of the ball. they have fitting systems from every leading golf club manufacturer. The club fitting staff is recognized throughout the industry as one of the very best. MOG staff fits literally thousands of players each year from high handicap players to some of the best players in the Midwest.
Practice Putting Green- The 27 acre practice facility has been named a Top 100 Range since 1996. It has over 100 tees with 42 covered and heated bays for year around use. They have found that excellent practice balls, quality synthetic mats, an excellent putting green (free), and grass tees make a very nice practice experience. For players who want even more in their practice, check out the Players Club and TrackMan the Game.
Click here to see all the photos and read the discussion in the forums
Golf Academy School- The Kendall Academy is the largest golf academy in Michigan. There are 8 experienced PGA or LPGA professional instructors who give lessons year around. These instructors have won numerous awards for golf instruction. The teaching studios are heated and protected from the elements yet allow players and instructors to see the full flight of the ball.
The Owner of the Acadamy is Dave Kendall. Here is his bio…
Dave Kendall PGA, Academy Founder- Dave is generally regarded as one of Michigan’s outstanding professionals. The recipient of the Michigan PGA’s 2010 Horton Smith Award for Contributions in PGA Professional Education. Dave was previously honored by the Michigan PGA as 2000 and 2004 Teacher of the year and 1990 and 2006 Golf Professional of the Year. Dave has over 30 years of experience instructing players of all levels. In 2011, Golf Digest ranked Dave #8 in its list of top instructors in Michigan. Golf Range Magazine has included Dave in its Top 50 Instructors in America for the past 8 years. A Class A PGA member since 1981, he is also very highly regarded as a competitive player having won two Michigan Senior Open Championships. In 2007, Dave won the Michigan Senior Open, Michigan Senior PGA Championship and the Michigan PGA Senior Player of the Year Award. The insight he has gained through his many years of teaching experience along with his competitive background has given Dave a very practical approach to golf improvement. Dave currently serves the Michigan PGA Section as its Senior Organization President.
One of Daves teachers is Paul Haase PGA Teaching Professional. Paul has been a Class A PGA member since 1975. He has been with the Kendall Academy since 1998 and is ranked as the 5th best instructor in Michigan by Golf Digest Magazine for 2011. In 2008, Paul was named the Michigan PGA Teacher of the Year. He has had a great number of success stories over his many years of teaching and coaching his students. Prior to turning professional, Paul had a very distinguished record as a collegiate player. He has extensive experience as a competitive player over the years. Most recently, Paul qualified for the PGA Senior Tour’s First of America Classic in 1998. In 2005, he won the Michigan PGA Senior Pro/Senior Am with student Bill Zylstra on 3 occasions. His knowledge of the golf swing and short game techniques, experience in communication, and friendly manner make Paul an outstanding instructor.
Miles of Golf is known for club fitting for many golfers in Michigan and Ohio. Here are some facts that MOG says about fittings.
Cluboratory Fittings-
The normal Cluboratory Fittings are designed to help golfers of all levels make good decisions on purchasing golf equipment and assuring that the clubs will appropriately fit the player. To accomplish this a player will go through a two-step process of testing clubs and then being fit for clubs.
The Testing Process. During the testing, the player determines the model of club that looks, feels, performs best and also meets the player’s price requirements. The testing involves hitting shots with different clubs and comparing the results. Critical to making a good evaluation of clubs is seeing the full flight of the ball. During the testing, a qualified club-fitter will assist you.
The Club-Fitting Process. This involves precisely fitting the club model the player selected in the testing process to his or her size and golf swing. If the fitting specifications are standard, Miles of Golf stocks these clubs and the player leaves with his or her clubs. If the specifications are not standard, the specifications are then forwarded to the custom club department of the club-maker and the clubs are assembled. The typical delivery time on custom clubs is two weeks. Clubs that must be ordered have a $25 shipping and handling fee.
Cluboratory Iron Fittings. After testing clubs and choosing the manufacturer and model of iron, the fitting process begins. With irons, the process identifies the correct shaft (length, composition, and flex), grip (size and composition), and the critical relationship between the shaft and the club-head called the lie angle. Also important in fitting irons is determining the clubs the player wants in the set. Custom clubs are ordered by the piece, or club, so if a player does not want a #3 or #4 irons, they are not ordered reducing the price of the set. Testing and fitting irons takes approximately 45 minutes. The testing and fitting fees are fully refundable if clubs are purchased. If they are not, the testing fee is $25 and the fitting fee is $75. In most cases, irons need to be custom ordered. Walk-ins are welcomed but appointments can be scheduled in advance and take precedence over walk-ins.
Cluboratory Metal Wood Fittings. After testing clubs, the process of fitting woods identifies the correct shaft (length, composition, and flex), grip (size and composition), and with drivers the correct loft. Unlike irons, the lie angle on woods is in most instances not a variable that needs to be addressed. The testing and fitting of woods takes 30-45 minutes. The testing and fitting fees are fully refundable if clubs are purchased. If they are not, the testing fee is $25 and the fitting fee is $25. In many cases, woods do not need to be custom ordered and Miles of Golf has them in stock. Walk-ins are welcomed but appointments can be scheduled in advance and take precedence over walk-ins.
Click here to see all the photos and read the discussion in the forums
Cluboratory Fitting Evaluation. This fitting analyzes a player’s current set to see how well it fits. It performs many of the same tests as the iron and wood fittings. The player receives recommendations on changes that can be made. This usually involves changing the length of shafts and bending loft and lie angles. The cost of this fitting is $25 for woods and the same for irons. The Miles of Golf repair shop can usually make any changes, but the fee does not cover the cost of these changes.
Frequently asked fitting questions:
This sounds great but expensive. Club-makers charge us the same for custom clubs or stock clubs. Therefore, the price of our custom clubs should be close, if not the same, as competitor’s stock clubs. Our staff will spend a fair amount of time helping customers testing and fitting clubs. A fee is incurred only if you do not do not purchase the clubs. If you purchase clubs, these fees in most cases, are completely refundable. Custom irons are from $300 and up. Drivers are from $200 and up.
You’re impatient. The club testing and fitting typically takes an hour or less and is both fun and informative. Delivery time varies with club-makers and the time of the year. The shortest is one-day delivery, and it rarely exceeds two weeks. The benefits of getting quality clubs made specifically for you can be extremely significant to how well they perform. Simply put, it’s well worth the short wait.
What if you’re not the best player? Actually, better golfers probably can adapt to ill-fitting clubs better than do average golfers. Golf becomes easier for everyone with clubs adapted to you instead of you adapting to your clubs.
My long irons all go about the same distance. Part of fitting is selecting which clubs should be in your bag. Stock iron sets come in a standard configuration that may not fit your game. If this is the case, you are paying with clubs you should not be using. When ordering custom clubs, our club-fitters help you determine which clubs you should be carrying. You only pay for what you order.
——-
Maxx Cluboratory Fittings- For the Discerning Player.
Maxx Cluboratory Fittings are designed for the serious player who wants the maximum in club-fitting expertise and technology when making decisions about his or her golf clubs. For players to benefit from our Maxx fittings, they must have the skills to hits shots with relative consistency. Guiding you through the process are our most experienced club-fitting professionals using our most sophisticated ball flight monitor, the TrackMan.
Currently we offer five Maxx fitting options:
Maxx Driver Fitting
Maxx Iron Fitting
Maxx Full Bag Fitting
Maxx Gap Fitting
Maxx Putter Fitting
Titleist Fitting Works Fitting
Frequently Asked Questions
1. Is a Maxx Fitting right for me?
Although a Maxx fitting can provide useful information for almost anyone who is interested in their launch conditions, it is really most beneficial to golfers who tend to make consistently solid shots. Because severe miss-hits will cause ball speed, launch angle and spin rate to fluctuate greatly, the numbers gathered from these types of shots will do little to provide the fitter with reliable information to make a practical and sound recommendation to the player. This does not mean you need to make perfect contact with every shot to benefit from this fitting. Occasional miss-hits are simply discarded and will not influence the resulting averages for that particular club. You also have the freedom to inform the fitter when you make a bad swing, even if the result is a fairly centered hit, in order to keep such atypical shots from skewing the results.
2. What are the differences between a Cluboratory and a Maxx Cluboratory Fitting?
First of all, both of these fittings are of exception high quality and most golfers will be satisfied with either one. The goals are the same, to help golfers find equipment that will improve their game.
Probably the biggest difference between the two is the use of the TrackMan ball flight monitor throughout the Maxx Fittings. It does give the club-fitters more information to help with the testing and fitting process, but it uses very expensive equipment and is time consuming so therefore more costly. Even with this equipment, the club-fitters will still closely observe the ball in its full flight just as they do with the normal Cluboratory fitting. For an experienced club-fitter, observing the ball flight is critically important to performing their job. The normal Cluboratory fitting takes ball flight measurements to verify that the clubs fit.
Click here to see all the photos and read the discussion in the forums
Golfers who are really into the game and want to thoroughly examine exotic shaft options will love the Maxx Fittings. If you have a less intense interest in the game but still want high quality clubs that fit, the normal Cluboratory fittings are perfect for you.
Whats in the Bag
Christiaan Maas WITB 2026 (June)
Driver: TaylorMade Qi4D LS (8 degrees)
Shaft: Fujikura Ventus TR Blue 6 X

3-wood: TaylorMade Qi10 (15 degrees)
Shaft: Fujikura Ventus Black 9 TX

Irons: TaylorMade P770 (3), TaylorMade P7CB (4), TaylorMade P7TW (5-PW)
Shafts: Fujikura Ventus Black HB 10 X, True Temper Dynamic Gold X100

Wedges: TaylorMade Prototype (50-SB09), TaylorMade MG5 (56-HB12, 60-LV07)
Shafts: True Temper Dynamic Gold S400


Putter: TaylorMade TP Juno

Ball: Titleist Pro V1x
Grips: Golf Pride Tour Velvet Cord
Check out more in-hand photos of Christiaan Maas’ clubs here.
Equipment
TaylorMade MySpider Tour and Tour X: More customizable build options now available
TaylorMade Golf’s MySpider program underwent a substantial overhaul over the last month. Firstly, the company launched the option to customize the Spider ZT model, and now the program has returned with the MySpider Tour and MySpider Tour X.
The revamped page now gives golfers complete control over every visual and functional detail of their putter on the popular Tour and Tour X head, with every cosmetic idea thought of. In MySpider Tour, golfers can choose from four head finishes, 16 paint fill colors, nine Surlyn face insert colors, three aluminum insert options, six sightline configurations, and four hosel options — L-neck, small slant, double bend, center shaft. Six sightline options are available in MySpider Tour, including the optically engineered True Path alignment system. MySpider Tour X gives builders the option of four head finishes, four hosel configurations, and five sightline options, also including True Path alignment.
One of the more interesting features of the new MySpider program is the availability of three distinct face insert options. Along with the usual Surlyn Pure Roll insert trusted by Scottie Scheffler and Rory McIlroy, which can be customized from nine colors, golfers can now also select firmer options. Two are offered with the black aluminum Pure Roll insert, slightly firmer than the traditional insert, or for the firmest feel, golfers can choose from two colors of milled aluminum inserts.

Another fun addition to the MySpider Tour is the ability to use the “Tommy Sightline.” The custom alignment aid design, which was first drawn onto Tommy Fleetwood’s putter by PGA Tour Rep James Holley, is based on the milled sightline on his Spider ZT head. There are five shorter lines on the left and right of a longer central line serving as the traditional short line alignment aid.
See below for the full specifications sheet for MySpider Tour and Tour X:
MySpider Tour

MySpider Tour X

Equipment
Then and now: Comparing Rory McIlroy’s current setup to his record-breaking 2019 Canadian Open victory
In Rory McIlroy’s first appearance at the 2019 RBC Canadian Open, he crushed the record books to earn his 16th PGA Tour title in dominating fashion, winning by seven shots over Shane Lowry and Webb Simpson.
McIlroy’s score of 22-under-par 258 is the lowest 72-hole score to date at the Canadian Open, and his closing 61 is also the best final-round score in the history of one of golf’s oldest tournaments. Finally, with his win in 2019, McIlroy became only the sixth player to win the career Triple Crown, adding to his victories at the U.S. Open in 2011 and The Open Championship in 2014, joining Tommy Armour, Walter Hagen, Arnold Palmer, Lee Trevino and Tiger Woods in a coveted list.
So, with that, why not compare his current setup to the clubs he used to break all the records?
Driver
2019: TaylorMade M5 (9 degrees), Shaft: Mitsubishi Tensei CK Pro White 70 TX
2026: TaylorMade Qi4D (9 degrees @8), Shaft: Fujikura Ventus Black 7X (45 5/8 inches)

McIroy led the Tour in Strokes Gained: Off-the-Tee in 2019; he’s doing the same in 2026. Between now and then, McIlroy has switched from the Mitsubishi Tensei CK Pro White 70 TX (a shaft with slightly more feeling in the tip) to the original Fujikura Ventus Black 7X, having just made the change to the heavier version from playing the 60X.
What’s interesting about McIlroy’s 2019 setup is that the weighting on his driver is actually set in the high-draw setting, using the T-Track weighting system, whereas in the Qi4D, he’s currently using a heavily rear-weighted setup. (Two 13-gram weights in the rear and only two 4-gram front weights.)
The TaylorMade M5 driver he played in during his Canadian Open win was the company’s first head that they claimed to design to initially exceed the USGA’s COR limit, and then injected with tuning resin to bring it back in bounds.
Fairway woods
2019: TaylorMade M6 3-wood (15 degrees), Shaft: Mitsubishi Tensei CK Pro White 80 TX; TaylorMade M5 5-wood (19 degrees), Shaft: Mitsubishi Tensei CK Pro White 90 TX
2026: TaylorMade Qi4D 3-wood (15 degrees), Shaft: Fujikura Ventus Black 8X; TaylorMade Qi4D 5-wood (18 degrees), Shaft: Fujikura Ventus Black 9X

The TaylorMade M6 fairway wood that McIlroy was using during the 2019 season is still in the bag of some of the best golfers on Tour in 2026. Just check out Justin Rose’s winning setup from the Farmers Insurance Open earlier this year. This year, though, McIlroy has still been searching for his top-end-of-the-bag setup, having played both the new Qi4D and the Qi10, which he won the Masters with.

The same shaft swap can be seen in the fairway woods as the driver, along with slightly less loft on the 5-wood.
Irons
2019: TaylorMade P750 (4) Buy here, TaylorMade P730 (5-9), Shafts: Project X 7.0
2026: TaylorMade P760 (4), TaylorMade Rors Proto (5-9), Shafts: Project X 7.0

The biggest difference between McIlroy’s custom set and the stock P730s is the groove design. While the P730s were constructed with 14 MX-9 grooves on their milled faces, McIlroy’s proto heads instead use the higher-spinning, 16-groove layout of the TW2 grooves. Other big differences between the sets are that McIlroy’s 7- and 8-irons have thinner toplines, are 1 degree stronger in loft, and are 1/4 inch longer than the original P730 builds.
With McIlroy’s 4-iron, the switch from P750 to P760 sees a transition to a two-piece construction with Speed Foam in it, which allows McIlroy to launch the ball slightly higher, with more workability.
Wedges
2019: TaylorMade Milled Grind (48-09SB), TaylorMade MG Hi-Toe (52-09SB, 56-09SB, 60-LB09), Shafts: Project X Rifle 6.5
2026: TaylorMade MG5 (46-09SB, 50-09SB, 54-11SB, 60-08LB @61), Shafts: Project X 6.5 (46-54), Project X 6.5 Wedge (60)

Between 2019 and 2026, McIlroy’s focus on his short game has been much more apparent. It was the reason why he switched back to the TP5 golf ball, to help with launch, spin and control with his wedges leading up to his career Grand Slam victory in 2025. The most apparent changes to McIlroy’s wedge setup are his lofts and bounce. He’s slowly delofted his pitching to a sand wedge, but has increased the loft on the lob wedge, bending his current 60-degree to 61. With that, adding more loft to his lob wedge also slightly increases the bounce and leading-edge sit point, so, as a result, he plays a lower-bounce lob wedge compared to 2019. The MG5 wedges are also softer than the first Milled Grind option from 2019. McIlroy also no longer plays the full-face grooves found on the Hi-Toe.
Putter
2019: TaylorMade Spider X
2026: TaylorMade Spider Tour X

Notice anything similar. Yes, the copper finish on Rory McIlroy’s Spider X putter in 2019 is a slightly more reflective finish than the recently released torched PVD finish. McIlroy was using the True Path alignment system, but now uses only a single white sightline.
Ball
2019: 2019 TaylorMade TP5 (#22)
2026: 2025 TaylorMade TP5 (RORS)
As mentioned above, McIlroy had transitioned from the TP5 to TP5x golf ball since his victory in Canada in 2019, but now is black with the same style of golf ball as his victory at Hamilton Golf & Country Club.
Grips
2019: Golf Pride Tour Velvet Cord
2026: Golf Pride MCC
Interesting, McIlroy actually used Golf Pride’s Tour Velvet Cord grips during his victory in 2019 (it was during a 2+ year switch to the corded TV) as opposed to his usual MCC grips, which he has played for most of his career.
-
Equipment6 days agoMemorial Tournament Tour Report: Rory McIlroy, Cameron Young switch up drivers, and more
-
News2 weeks agoRussell Henley’s winning WITB: 2026 Charles Schwab Challenge
-
Equipment4 days agoBest irons 2026: Best irons overall, most forgiving irons, and more
-
Whats in the Bag4 days agoJ.T. Poston’s winning WITB: 2026 Memorial Tournament
-
Equipment1 week agoDetails on Jason Day’s latest prototype Avoda iron setup
-
Equipment3 weeks agoCJ Cup Byron Nelson Tour Report: Koepka and Kim’s newest putters finally get hot
-
News2 weeks agoCharles Schwab Challenge Tour Report: MacIntyre, Åberg and Spaun all switch putters, TaylorMade launches new Spider
-
Equipment2 weeks agoDetails on J.J. Spaun’s surprise putter switch


































































































Dennis Page
Aug 12, 2012 at 5:13 pm
I am looking for a Cobra Pro CB gap wedge that is new or like new condition. I tried to buy one and they sent the S3 but I do not like it. Would be willing to trade the S3 for the Pro CB if interested
terry houseman
Jul 22, 2012 at 2:38 pm
Thank’s Good Info
Pingback: Michigan Campaign Database•Michigan Registered Voters List•Voter Database