Connect with us

Equipment

Callaway launches new Big Bertha Irons and Hybrids

Published

on

Callaway has today announced the introduction of its new Big Bertha Irons and hybrids, which feature a thinner club face and optimized center of gravity, designed to provide easier launch and greater distance.

Big Bertha Irons

Following on from the 2016 Big Bertha OS Irons line, which showcased Callaway’s EXO-Cage technology, these new Big Bertha irons will feature the company’s brand new Suspended Energy Core. The Suspended Energy Core features a Metal Injection Molded (MIM’d) Tungsten Floating Weight suspended within a urethane microsphere material to create a deeper center of gravity. According to Callaway, this yields easy launch, longer, and more consistent golf shots.

The Big Bertha Irons will also feature Callaway’s 360 Face Cup, which employs a flexible rim around the face that flexes and releases at impact — this aims to increase ball speed. Owing to the new Suspended Energy Core, this will be Callaway’s thinnest face cup yet, which the company says results in increased ball speeds.

Callaway’s new Big Bertha Irons will be available with Recoil ESX, Recoil ZT9, and KBS Max 90 shafts. The irons hit the shelves on Jan. 18 and will cost $1,200 in steel and $1,300 in graphite.

Big Bertha Hybrids

The new Big Bertha Hybrids will feature Jailbreak Technology, which Callaway first introduced in 2017 with the Epic line. The technology, which was created with the aim of promoting faster ball speed and greater distance, incorporates two internal bars that stiffen the body, placing more impact load on the face. It proved to be a very popular addition from Callaway, and in their new Big Bertha Hybrids, the company have combined this technology with a new shorter and lighter OptiFit Hosel System designed to optimize the center of gravity for an easier launch and a higher, long-carrying flight.

The new hybrids from Callaway also feature an ultra-thin, Carpenter 455 steel face and Hyper Speed Face Cup, with the combination designed to create optimum ballspeed across the face.

The Big Bertha Hybrids will be available in both premium Recoil ESX and ZT9 Shafts, and they will be in stores on Jan. 18 for $269.99 each.

A special thanks to our Brian Knudson for braving the chill and doing his best to find a few blades of green grass for the outdoor, in-hand photos readers prefer.

 

Your Reaction?
  • 135
  • LEGIT21
  • WOW11
  • LOL9
  • IDHT6
  • FLOP9
  • OB5
  • SHANK64

Gianni is the Managing Editor at GolfWRX. He can be contacted at [email protected].

20 Comments

20 Comments

  1. ogo

    Jan 7, 2019 at 10:42 pm

    A WILLIAM ROSS PATENT SPRING-FACE IRON, CIRCA 1893
    http://www.sothebys.com/en/auctions/ecatalogue/2007/the-jeffery-b-ellis-antique-golf-club-collection-n08380/lot.379.html

    Well… so much for Callaway innovative “engineering” superiority… 😮

  2. Piter

    Dec 7, 2018 at 4:20 pm

    Very similar looking to the Callaway FT from a few years back. I like the look though.
    I never buy a current model so price doesn’t bother me, it will come down eventually. If the same applies to irons as with drivers (about 1 yard distance gain for each new model per year) I will wait for 5+ years..

  3. Ron

    Nov 14, 2018 at 1:04 pm

    I’ll wait for the GREAT Big Bertha irons for even more distance claims. GBB all the way!!

  4. Paulie C

    Nov 14, 2018 at 11:47 am

    Ridiculous that a set of irons have to be this much money. They’re at a point where the ball speed leaving the faces are maxed out. Golf balls can’t legally go any further. Been that way for years yet every year we hear about picking up an extra 6-7 yards per club. Every year the faces get thinner too. In what? Laboratory testing? They shave .000000037 off the face just so they can say they’re more forgiving and higher launching than the previous model. Keep ’em!

    • Roy

      Nov 14, 2018 at 9:45 pm

      Thought COR only applied to drivers?? That aside – why is it so hard to. Elite e that a bigger budget leads to a better product. But no worries,sure there were lots of guys questioning how they would improve the Model T

  5. ogo

    Nov 13, 2018 at 5:49 pm

    OMG!!! … OMG!!! … OMG!!!!!!!!!
    https://www.youtube.com/watch?v=eKiSX8qYL3M

  6. jim

    Nov 13, 2018 at 5:33 pm

    I see all the Callaway Haters are out. It is the Big Bertha iron, it will do what is is suppose to do for the players that it needs to do it for…..Launch easily! yes, and of course will go further than its predecessor. That is not a good thing? If you don’t like them or they are not for you then simply move on, not a big deal. But if you think they might be, go try them. Is that so hard?

    • Tom

      Nov 13, 2018 at 6:51 pm

      jim, what department at Callaway do you work in…..lol!Its not just Callaway, nobody has anything different, except cosmetics….sellers be sellin! Save your money!

  7. Tom

    Nov 13, 2018 at 1:00 pm

    Well, its pretty obvious the club manufactures have absolutely nothing new….so they jack up lofts and tell you that’s better…..what a joke!Save your money. Sellers be sellin!

  8. Speedy

    Nov 13, 2018 at 12:54 pm

    An awful looking club that deserves its ridiculous price point. Is Callaway losing it?

  9. RR

    Nov 13, 2018 at 10:39 am

    I used to have a SGI set of Wilson Di5’s. I used to fly the green all the time and take penalty strokes. The 9 iron would fly 190 on a pure strike. Crazy! It was like a hitting the ball with a trampoline. I now miss the green short with forged irons sometimes but I am always in bounds. These shovel sets are getting over the top…..but I will be old with a slow swing speed one day and will still want to golf so keep on improving that tech!

    • Johnny Penso

      Nov 14, 2018 at 12:24 am

      Odd. I have a set of Di-7’s I picked up last winter for $75 that I played 20 times with this year and never hit a single flyer. I guess the physics in mine were different than yours.

  10. dat

    Nov 13, 2018 at 10:30 am

    Hideous, jacked, no feel, ultra expensive. These will sell well because your average Joe can hit his 7i in a simulator 175, which is 6 yards longer than his set from 2009.

  11. JP

    Nov 13, 2018 at 9:55 am

    Recycled tech and jacked lofts. The offset looks terrible.

    Go back to what you do best. Woods

  12. Young Tom Morris

    Nov 13, 2018 at 8:50 am

    Have fun launching a pw 20 yards over the green. Nobody needs these.

  13. Corey

    Nov 13, 2018 at 8:03 am

    Callaway losing their minds on pricing…

    • jeremy

      Nov 13, 2018 at 9:46 am

      Most fitted club at Club Champion this year was the P790…. Had a price point… oh yeah, $1300 per set…….. need to do some research

      • Corey

        Nov 13, 2018 at 7:39 pm

        790s at least involved new tech for TM that would account for the price. These appear to just be a recycle for Cally. I don’t need to do any research, thanks for the tip though…

Leave a Reply

Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Whats in the Bag

Alex Fitzpatrick WITB 2024 (April)

Published

on

  • Alex Fitzpatrick what’s in the bag accurate as of the Zurich Classic. 

Driver: Ping G430 LST (10.5 degrees)
Shaft: Fujikura Ventus Black 6 X

3-wood: TaylorMade Qi10 (15 degrees)
Shaft: Fujikura Ventus TR Black 7 X

Hybrid: Ping G430 (19 degrees)
Shaft: Fujikura Ventus Black HB 10 TX

Irons: Ping iCrossover (2), Titleist T100 (4-PW)
Shafts: Fujikura Ventus Black HB 9 TX (2), Nippon N.S. Pro Modus 3 Tour 120 X (4-9)

Wedges: Titleist Vokey Design SM10 (50-12F, 56-12D, 60-08M)
Shafts: Nippon N.S. Pro Modus 3 Tour 120 X

Putter: Bettinardi SS16 Dass

Grips: Golf Pride MCC

Check out more in-hand photos of Alex Fitzpatrick’s clubs here.

Your Reaction?
  • 0
  • LEGIT0
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

Equipment

What’s the perfect mini-driver/shaft combo? – GolfWRXers discuss

Published

on

In our forums, our members have been discussing Mini-Drivers and accompanying shafts. WRXer ‘JamesFisher1990’ is about to purchase a BRNR Mini and is torn on what shaft weight to use, and our members have been sharing their thoughts and set ups in our forum.

Here are a few posts from the thread, but make sure to check out the entire discussion and have your say at the link below.

  • PARETO: “New BRNR at 13.5. Took it over to TXG (Club Champ but TXG will always rule) in Calgary for a fit. Took the head down to 12, stuck in a Graphite Design AD at 3 wood length and 60g. Presto- numbers that rivaled my G430Max but with waaaaay tighter dispersion. Win.”
  • driveandputtmachine: “Still playing a MIni 300.  The head was only 208, so I ordered a heavier weight and play it at 3 wood length.  I am playing a Ventus Red 70.   I play 70 grams in my fairways.  I use it mainly to hit draws off the tee.  When I combine me, a driver, and trying to hit a draw it does not work out well most of the time.  So the MIni is for that. As an aside, I have not hit the newest BRNR, but the previous model wasn’t great off the deck.  The 300 Mini is very good off the deck.”
  • JAM01: “Ok, just put the BRNR in the bag along side a QI10 max and a QI10 3 wood. A load of top end redundancy. But, I have several holes at my two home courses where the flight and accuracy of the mini driver helps immensely. Mine is stock Proforce 65 at 13.5, I could see a heavier shaft, but to normal flex, as a nice alternative.”

Entire Thread: “What’s the perfect Mini-Driver/Shaft combo? – GolfWRXers discuss”

Your Reaction?
  • 1
  • LEGIT0
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

Equipment

Coolest thing for sale in the GolfWRX Classifieds (4/26/24): Artisan 0521 custom putter

Published

on

At GolfWRX, we are a community of like-minded individuals that all experience and express our enjoyment of the game in many ways.

It’s that sense of community that drives day-to-day interactions in the forums on topics that range from best driver to what marker you use to mark your ball. It even allows us to share another thing we all love – buying and selling equipment.

Currently, in our GolfWRX buy/sell/trade (BST) forum, there is a listing for an Artisan 0521 custom putter

From the seller: (@Nobody2): “$775 -Artisan 0521 custom putter PVD (black finish) with sweep neck hosel.  There are no personal stampings other than my player # in very small print on the side of the hosel (all Artisan products have this along with the date it was made). This putter looks absolutely amazing and has only been used for 3 rounds. It has a black steel shaft and has a very Cam Smith look to it.  The putter looks new and has no wear marks anywhere on the putter.  It comes with extra weights (one set of of 5 gram weights and one set of 15 gram weights). The head cover is a a navy blue ‘quilted blade putter cover.’  If you are wondering why I am selling…I flat out have the yips and the only thing saving me is a broomstick.  New, this putter is $1085, so if the specs work for you (grip, length and lie can certainly be tweaked) it will save you some good money and 2 month wait time.

Specs:

Loft               2.75  degrees
Lie                  69  degrees
Length           35.25″
offset             .300 slightly less than full shaft offset
head weight     350 grams
Toe Hang          20 degrees
Grip                   Ionic Classic Pistol”

To check out the full listing in our BST forum, head through the link: Artisan 0521 custom putter

This is the most impressive current listing from the GolfWRX BST, and if you are curious about the rules to participate in the BST Forum you can check them out here: GolfWRX BST Rules

Your Reaction?
  • 1
  • LEGIT0
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

WITB

Facebook

Trending