Connect with us

Equipment

The GolfWRX Shop (Episode 8): Building single-length PXG 0311 irons

Published

on

Equipment expert Brian Knudson goes into The GolfWRX Shop to build himself a set of single-length PXG 0311 irons. Enjoy the video below!

Your Reaction?
  • 61
  • LEGIT6
  • WOW4
  • LOL3
  • IDHT0
  • FLOP2
  • OB5
  • SHANK17

We share your golf passion. You can follow GolfWRX on Twitter @GolfWRX, Facebook and Instagram.

41 Comments

41 Comments

  1. Marks23

    Feb 20, 2019 at 11:56 am

    Any update on the single length build and the catalyst shafts? Curious to hear your comments about tip trimming the parallel tip shafts as well.

  2. Tyler

    Feb 1, 2019 at 5:54 pm

    It would be interesting if you could get heavier screws to use on the long irons instead of lead tape. Would be more consistent than the tape and more secure.

  3. Dylan

    Dec 25, 2018 at 9:16 pm

    I will literally pay PXG or you to do this, Knudson. The game desperately needs more single length options.

  4. MG

    Nov 26, 2018 at 3:28 pm

    I am experimenting with single length irons and love the way I hit the long irons bu the problem I am having is hitting the short irons (GW-8) fat and I am thinking about trying a mixed set with variable length up to the 7 iron and then 7 iron length 6 and 5 irons. I have a set of TM P790 and i can order a P790 6 and 5 iron from TM at 7 iron length and lie angle but am wondering about weighting since they will come already assembled so not sure how to get the head weights the same. Can they be weighed with the shaft in the head?

  5. Jesse Traskal

    Oct 30, 2018 at 5:20 am

    If you were to use project x .370 shafts, would you use 7 iron shafts for each club or use the 4-pw shafts all trimmed to 7 iron length?

    • Knudson

      Oct 30, 2018 at 8:14 am

      The Project X Catalyst shafts are .370 and I tip trimmed them all like a 4-PW set. You can use all 7 iron shafts, that is the other option. From what I have been told, stronger players will typically like the standard set all cut down to 7i length.

  6. Robert

    Oct 29, 2018 at 3:53 pm

    Hey Knudson, can you publish a chart of a comparison of distance and trajectory of the single length vs traditional length? In theory, the potential for consistency in swing feel from iron to iron is incredibly appealing. But then you need to reset distances….in theory?

  7. TLW

    Oct 29, 2018 at 2:29 pm

    It was a complete let down that you took the easy way out changing the head weights in the short irons, especially since this is the “GolfWRX Shop.” Not too many people have PXG as their backup irons.

    • Knudson

      Oct 30, 2018 at 8:15 am

      I am currently modifying a wedge that has no weight ports, so stay tuned for that.

  8. Jvvmes

    Oct 29, 2018 at 11:20 am

    Really want to see Knudsen play with them.

    • freeman

      Oct 29, 2018 at 7:43 pm

      … and swing around that pot belly… lol

  9. Joe

    Oct 28, 2018 at 12:17 pm

    Knuds,

    What grips are those? Pretty fly looking set.

    • aga

      Oct 28, 2018 at 6:06 pm

      … and a set of bombing clubs …. boyaaah

    • Knudson

      Oct 29, 2018 at 7:37 am

      They are old Black Widow Torque cords. I bought a ton of them years ago and they go on all my projects, then swapped out if the club makes the rotation!

  10. Mark

    Oct 28, 2018 at 10:33 am

    Brian, how did the single length PXGs perform for you?

    • aga

      Oct 28, 2018 at 6:07 pm

      The secret is in the skrews… sooo goood

    • Knudson

      Oct 29, 2018 at 7:34 am

      I have got them on the course twice and overall pretty good. I think the 4+5 irons might need to be bent 1* strong, but the ball flight is pretty good and turf interaction seems unchanged.

  11. CaoNiMa

    Oct 28, 2018 at 1:13 am

    What are you gonna do with all the wrong sole angles? Grind them so they all sit flat and the same? Show us that part as you grind off the soles until some of the numbers get ground off.
    Idiot club builder this guy is.

    • JM

      Oct 28, 2018 at 2:32 am

      Why on earth would you need to grind the soles to change the lie angles? You can change the lies all by bending them. Looking at the standard specs to bend all to same angle as say the 7i (62.5*) the most you’d have to do is 1.5* (4i and GW) and less as you get closer to the 7i.

      • CaoNiMa

        Oct 28, 2018 at 3:34 am

        Build one and see for yourself

        • JM

          Nov 2, 2018 at 2:43 pm

          Changing lie angle is independent from loft angle. I’m not sure what’s hard to comprehend about this….

      • aga

        Oct 28, 2018 at 6:12 pm

        If you keep the sole angles per standard spec you must increase face loft when bending. Simple geometry…. so obvious….

        • JM

          Nov 2, 2018 at 2:58 pm

          Huh? He’s building a single length set so he needs to bend the lie angles to match his specs for the chosen length (in this case he’s going off a 37″ 7 iron). So, if his lie angle on the 4i is 61* he needs to bend the lie angle 1.5* up to match his other single length irons (at 62.5*). This is based off standard specs from PXG. There should be no change in loft unless he adjusted improperly.

          • youraway

            Jan 19, 2019 at 7:21 pm

            JM, just wondering, since he used a 7-iron as his standard and built the others from it, should all shafts be tip trimmed the same as the 7-iron and butt cut to exact lengths after the lies have been adjusted? I thought we tip trimmed a shaft based on the desired length of the shaft. Normally tip trimming is much less for the 4 than a wedge, but if all shafts are same lengths, why gives?

  12. Wes B

    Oct 27, 2018 at 9:59 pm

    Thats awesome! I would love to try this out some day.

  13. Ozymandius

    Oct 27, 2018 at 7:24 pm

    Hey…. knucklehead knudson… I dare you to bend a PXG cast steel hosel by 2º without snapping the hosel… and kissing $600 byebye… 😮

    • JB

      Oct 28, 2018 at 9:20 am

      PXG’s are easy to bend. I have done it hundreds of times.

      • aga

        Oct 28, 2018 at 6:10 pm

        …. and hundreds of snapped hosels too …..?!!

    • BB

      Oct 28, 2018 at 9:33 am

      They are forged!

      • aga

        Oct 28, 2018 at 6:09 pm

        … only face forged… the body and hosel are cast steel.

        • AC

          Oct 29, 2018 at 3:53 pm

          I had mine bent, the builder said they are super easy to bend. Has bent a ton and not one lost. Are you speaking from experience or just “theoretically”?

          • JM

            Nov 2, 2018 at 3:02 pm

            If you read his other comments he’s clearly a troll. Either a PXG and/or SL iron hater. His feelings have grossly affected his objectivity.

    • Knudson

      Oct 29, 2018 at 7:44 am

      Knucklehead here. It is pretty easy to bend PXG irons, have done it numerous times. I went with a 63* lie angle, matching the irons I got fit for at the beginning of the year. Didn’t break a single iron, even going 2.5* on one.

      • aga

        Oct 29, 2018 at 7:46 pm

        In that case the PXGs will not retain their original lie angles after being beaten mercilessly by pro golfers… they will go ‘out of lie’… just like forged blades.

  14. JP

    Oct 27, 2018 at 4:41 pm

    Making bad into worse..!

    Bob’s lawyers will be drafting up the lawsuit shortly.

    • Bob

      Oct 28, 2018 at 6:16 pm

      How dare Knudson modify my beautiful best ever clubs… it’s criminal … :-O

  15. Tom

    Oct 27, 2018 at 3:27 pm

    Tommy Armour offered this one length iron concept with their “EQL” model in about 1986….this is nothing different.Buy a set of used EQLs on eBay and save time and money ruining a traditional set.

    • JR

      Oct 27, 2018 at 3:35 pm

      totally totally uninformed comment

      • aga

        Oct 28, 2018 at 6:14 pm

        Yeah… PXGs are filled with magic prototype design magic… 😮

  16. Travis

    Oct 27, 2018 at 2:35 pm

    Pretty cool watch. Not sure why you’d want to do this to PXG’s but hey, to each their own.

    • Bob

      Oct 28, 2018 at 6:18 pm

      Knuckleheaded gearhesds who have no swing but want to own high status PXGs.

Leave a Reply

Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Equipment

What’s the perfect Mini-Driver/Shaft combo? – GolfWRXers discuss

Published

on

In our forums, our members have been discussing Mini-Drivers and accompanying shafts. WRXer ‘JamesFisher1990’ is about to purchase a BRNR Mini and is torn on what shaft weight to use, and our members have been sharing their thoughts and set ups in our forum.

Here are a few posts from the thread, but make sure to check out the entire discussion and have your say at the link below.

  • PARETO: “New BRNR at 13.5. Took it over to TXG (Club Champ but TXG will always rule) in Calgary for a fit. Took the head down to 12, stuck in a Graphite Design AD at 3 wood length and 60g. Presto- numbers that rivaled my G430Max but with waaaaay tighter dispersion. Win.”
  • driveandputtmachine: “Still playing a MIni 300.  The head was only 208, so I ordered a heavier weight and play it at 3 wood length.  I am playing a Ventus Red 70.   I play 70 grams in my fairways.  I use it mainly to hit draws off the tee.  When I combine me, a driver, and trying to hit a draw it does not work out well most of the time.  So the MIni is for that. As an aside, I have not hit the newest BRNR, but the previous model wasn’t great off the deck.  The 300 Mini is very good off the deck.”
  • JAM01: “Ok, just put the BRNR in the bag along side a QI10 max and a QI10 3 wood. A load of top end redundancy. But, I have several holes at my two home courses where the flight and accuracy of the mini driver helps immensely. Mine is stock Proforce 65 at 13.5, I could see a heavier shaft, but to normal flex, as a nice alternative.”

Entire Thread: “What’s the perfect Mini-Driver/Shaft combo? – GolfWRXers discuss”

Your Reaction?
  • 0
  • LEGIT0
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

Equipment

Coolest thing for sale in the GolfWRX Classifieds (4/26/24): Artisan 0521 custom putter

Published

on

At GolfWRX, we are a community of like-minded individuals that all experience and express our enjoyment of the game in many ways.

It’s that sense of community that drives day-to-day interactions in the forums on topics that range from best driver to what marker you use to mark your ball. It even allows us to share another thing we all love – buying and selling equipment.

Currently, in our GolfWRX buy/sell/trade (BST) forum, there is a listing for an Artisan 0521 custom putter

From the seller: (@Nobody2): “$775 -Artisan 0521 custom putter PVD (black finish) with sweep neck hosel.  There are no personal stampings other than my player # in very small print on the side of the hosel (all Artisan products have this along with the date it was made). This putter looks absolutely amazing and has only been used for 3 rounds. It has a black steel shaft and has a very Cam Smith look to it.  The putter looks new and has no wear marks anywhere on the putter.  It comes with extra weights (one set of of 5 gram weights and one set of 15 gram weights). The head cover is a a navy blue ‘quilted blade putter cover.’  If you are wondering why I am selling…I flat out have the yips and the only thing saving me is a broomstick.  New, this putter is $1085, so if the specs work for you (grip, length and lie can certainly be tweaked) it will save you some good money and 2 month wait time.

Specs:

Loft               2.75  degrees
Lie                  69  degrees
Length           35.25″
offset             .300 slightly less than full shaft offset
head weight     350 grams
Toe Hang          20 degrees
Grip                   Ionic Classic Pistol”

To check out the full listing in our BST forum, head through the link: Artisan 0521 custom putter

This is the most impressive current listing from the GolfWRX BST, and if you are curious about the rules to participate in the BST Forum you can check them out here: GolfWRX BST Rules

Your Reaction?
  • 1
  • LEGIT0
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

Equipment

A shocking Backstryke putter appearance + 7 interesting gear photos from the Zurich Classic

Published

on

Welcome to New Orleans, where TPC Louisiana plays host to the 2024 Zurich Classic. In between breakfast beignets and nightly Creole feasts, PGA Tour players are also competing in the unique two-man format at the Zurich this week.

Although the vibes in Nawlins are a bit lighter-fare than the recent back-to-back competitions the Masters and the RBC Heritage signature event), the gear news was no less serious this week.

We spotted some recent changes from Rory McIlroy, a very rare Odyssey Backstryke putter, dove into the bag of legendary New Orleans Saints quarterback Drew Brees, and spotted Patrick Cantlay continuing to test new equipment.

Get your beads out and crack your crawfish, because it’s time for an equipment rundown from The Big Easy (meaning New Orleans, of course, not Ernie Els).

See all of our photos from the Zurich Classic here

Rory’s on-and-off lob wedge

Since the end of 2023, Rory McIlroy has had an on-again, off-again relationship with a Titleist Vokey K-Grind lob wedge. In his last start, it was on, and the wedge is back in the bag again this week. We got a great look at the complicated grind that McIlroy uses.

 

View this post on Instagram

 

A post shared by GolfWRX (@golfwrx)

A full look into McIlroy’s bag above also shows that he switched out of the TaylorMade BRNR Mini Copper that he used at the RBC Heritage, and he’s back into the Qi10 core 3-wood. As we discussed last week, McIlroy will likely keep the BRNR around as a course-specific club, trading it in and out for the 3-wood.

See Rory McIlroy’s full 2024 WITB from the Zurich here

Turning Back the clock

Unless Tommy Gainey is in the field, it’s unlikely you’ll ever see Odyssey’s Backstryke technology make an appearance on the PGA Tour.

But then, when you least expect it, Russ Cochran shows up.

For more than a decade – since the 2013 Sony Open in Hawai’i – Cochran has been stuck on 599 PGA Tour starts. This week will be his 600th.

Cochran is in the field at the Zurich this week playing alongside Eric Cole, whose regular caddie is Reed Cochran, Russ’s son.

The Backstryke putter was first released back in 2010, and its unique design helps shift the axis point of the putter closer to the CG of the head. And, the putter is getting a nod this week at the Zurich Classic, thanks to Cochran’s 600th career PGA Tour start.

The putter is certainly awesome, but don’t forget to check out Cochran’s full WITB from this week.

Drew Brees with a Super Bowl winning Scotty Cameron putter

Drew Brees, a legendary retired quarterback for the hometown New Orleans Saints, made an appearance at the Zurich’s Wednesday Pro-Am, playing alongside Zach Johnson, Ryan Palmer, and current Saints QB Derek Carr.

Brees’ bag included a TaylorMade Stealth2 Plus driver, a BRNR Mini 13.5-degree, a Stealth 5-wood, a mixed set of P-790 and P-760 irons, Milled Grind Hi-Toe wedges, and a custom Scotty Cameron “New Orleans Saints” putter, which Scotty made for Brees following his Super Bowl MVP-winning performance in 2010.

 

View this post on Instagram

 

A post shared by GolfWRX (@golfwrx)

It should also be noted that Brees has his Venmo QR code as a bag tag.

If you’re gambling with Brees on the course, just know that not having cash won’t work as an excuse.

Brilliant.

See Drew Brees’ full WITB from the Zurich here

Stricker’s unrecognizable putter

Steve Stricker has made numerous upgrades to his bag recently, including a new TSR3 driver and T100 irons, but his longtime Odyssey White Hot No. 2 putter is still going strong. It’s the most recognizable unrecognizable putter ever.

Here’s a better look at Stricker’s flatstick, which he started using back in 2007.

 

View this post on Instagram

 

A post shared by GolfWRX (@golfwrx)

Patrick Cantlay has opened the equipment-switching floodgates

Over on the PGA Tour’s Equipment Report this week, we covered Cantlay’s recent switch into Ping Blueprint S irons, and a Titleist TSR2 driver.

Cantlay hadn’t switched irons for about seven years, so the iron switch he made at The 2024 Masters came as a shock to the norm. He simply isn’t one to change gear very often, so anytime Cantlay makes a switch, it’s news.

It seems the floodgates of equipment testing have opened up a bit for Cantlay, who was also spotted testing a custom Scotty Cameron blade putter on Tuesday this week. By Wednesday, Cantlay was back practicing with his familiar Scotty Cameron T5 Proto mallet, but it’s certainly something to keep an eye on going forward.

Daniel Berger’s custom Jailbird site lines

Berger, who’s currently using Odyssey’s Ai-One Mini Jailbird mallet putter, has a unique 3-dot, 2-line alignment on the crown of his navy-white-navy-white mallet putter. Looking down at the putter, it’s easy to see why this alignment system would help; it just seems impossible to set up to the ball off-center, or misaligned to the target.

Also, for anyone worried, you can rest easy. Yes, he’s still playing the 2013 TaylorMade TP MC irons, which we highlighted in our recent “Modern Classics: Old vs. New” video testing series.

FitzMagic teams back up

Brothers Matthew and Alex Fitzpatrick are teaming up once again at the Zurich this year, and Bettinardi Golf hooked them up with some festive “FitzMagic” headcovers to match this week.

See what else is in Alex Fitzpatrick’s WITB here

And, with that, we say goodbye to the Zurich Classic in New Orleans. Don’t forget to check out all of our photos from this week, including 30 unique photo galleries full of equipment photos.

We’ll see you next week in Texas for the 2024 CJ Cup Byron Nelson!

Your Reaction?
  • 8
  • LEGIT0
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

WITB

Facebook

Trending