Connect with us

Equipment

Ben Hogan launches Ft. Worth 15 Hi Irons, 2016 Staff Bag

Published

on

The people at the Ben Hogan Golf Company think more golfers would play forged irons if the long irons weren’t so challenging to hit consistently. So as the company builds on its core business of Ft. Worth 15 irons and TK wedges, it makes sense that Hogan would expand its line with more forgiving forged iron options.

At the 2016 PGA Merchandise Show, the company launched a cavity-back set of irons called PTx that are an alternative to the blade-like Ft. Worth 15 irons. It also debuted a hybrid with adjustable weights called VKTR, which could replace a golfer’s troublesome long irons (we identified both as a “Show Stopper”).

Hogan’s new Ft. Worth Hi irons are something in between.

FTWORTHhi_21-25_01

Like the Ft. Worth 15 irons, the Ft. Worth Hi irons are forged from 1025 carbon steel. They’re 15 percent larger, however, and use a two-piece, hollow-body construction that redistributes mass lower and deeper in the iron head. The hollow-body construction also brings added ball speed for more distance, as well as more forgiveness when golfers miss the sweet spot. And its more rearward center of gravity (CG) encourages a higher ball flight to help golfers stop their long approach shots quicker on the green.FTWORTHhi_VSOLE_01

Consistent with the importance Hogan places on distance gapping, the Ft. Worth Hi irons are available in 11 different lofts (20-31 degrees). The company recommends as many as three of them chosen from the following loft ranges: 20-23, 24-27, 28-31. Think of them as 3, 4 and 5 iron replacements.

“When you get under 30-32 degrees of loft, spin is your friend, particularly in off-center performance,” says Terry Koehler, President/CEO of the Ben Hogan Golf Equipment Company. “Most long-iron misses are low on the club face and result in low-launch, low-spin shots that have shorter carry distances and a shallower angle of descent. The Fort Worth Hi irons’ hollow construction and precision engineering deliver the right balance of perimeter weighting, looks, ball flight and distance control, creating the new standard in long iron design and playability.”

The Ft. Worth Hi irons are currently available for $169 per club with KBS’ Tour V or Tour 90 shafts. The standard graphite shaft is UST Mamiya’s Recoil, which boost the price to $184 per club. Several custom shaft and grip options are also available through www.benhogangolf.com.

TourStaffBag_01

True Ben Hogan fans will also be excited to know that the company has also released a new 2016 Tour Bag ($450) that can be customized for an extra $15.

Your Reaction?
  • 245
  • LEGIT28
  • WOW25
  • LOL6
  • IDHT6
  • FLOP5
  • OB2
  • SHANK6

11 Comments

11 Comments

  1. David Labbe

    Apr 24, 2016 at 7:18 am

    Interesting that PXG started out testing with hollow irons, but the face would not hold form after hitting the ball over a short amount of time. That’s why they then added the polymer type filling so that the iron would hold its shape.

    • Jim

      Aug 15, 2016 at 4:20 pm

      ….Peter Belmont invented the hollow body iron – I believe. He held patents on it as well as a few adjustable weighting systems and patents that Titleist & TM used at one time or another…Rarely has something “new” in golf equipment not been tried before…. Nike Covert Driver (see BULLET GOLF Hollow Point Driver)….most of the deigns were ahead of their time and limited by materials and tech at the time.

      Hope they’re as good as they look. Wish em well… just as long as they don’t end up in Walmart with the BH clothing line…
      Belmont’s hollow core iron was years ahead of it’s time as maybe the biggest head anyone’d seen or was willing to try was the original Ping…He kept it as ‘small’ as possible and the weight was on a screw that ran from toe to heel and as it was turned the weight would ‘walk’ out to toe or back towards the heel….other designs for weighted screws in sole plates for woods, as well as heel / toe weight ports for coin style weights

  2. Mark

    Apr 24, 2016 at 3:40 am

    They look superb. Wonder when they will restart UK sales?

  3. Chuck D

    Apr 23, 2016 at 2:35 pm

    Hogan’s ghost probably wants nothing to do with a broom handler that STILL appears to be putting illegally with his thumb knuckle AND left forearm STILL ATTACHED to his body…………I don’t care what anyone says! A part of his left arm and hand are connected to his body. Anchoring, simple and plain. The rule is a disaster! The governing numb skulls should have limited the length of the putter to “let’s say 40,” so there would be no question. You should have seen the patrons at the Mahztaz standing at every conceivable angle to see how Lang’a was getting away with his stroke!

    • Rod C

      Aug 9, 2016 at 4:25 pm

      I agree 100% with you. It is anchored. If the golf administrators wanted to get rid of the long putter all they need to do is say the hands must be below the elbows when holding the club. That would force a traditional stroke with the putter like 99% of the golfing population.

  4. Jade

    Apr 22, 2016 at 4:59 pm

    They would of suited DeChambeau!

  5. rex235

    Apr 21, 2016 at 9:42 pm

    Three words-

    RIGHT HAND ONLY.

    • TCJ

      Apr 22, 2016 at 2:28 am

      It’s devastating, not a single LH option, with no intentions to pursue it either.

  6. Andy

    Apr 21, 2016 at 3:18 pm

    Will the company sponsor any pros on the PGA or Champions tour?

    • Chuck

      Apr 21, 2016 at 9:31 pm

      I was just thinking about how cool it would be if Langer became a Ben Hogan Golf staffer. Probably the last guy on any tour playing with original Hogans. I’ll bet Langer would love it, if they could afford him. He’s only wearing about eight other logos right now.

      • Andy

        Apr 22, 2016 at 8:54 am

        I agree. Maybe he will since it looks like he no longer plays for Adam’s….

        I could picture certain tour players who prefer very traditional and classic looking clubs.

Leave a Reply

Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Whats in the Bag

Steve Stricker WITB 2024 (April)

Published

on

Driver: Titleist TSR3 (9 degrees, C4 SureFit setting)
Shaft: Fujikura Motore Speeder VC 7.2 X

3-wood: Titleist 915F (13.5 degrees)
Shaft: Mitsubishi Tensei CK Pro White 80 TX

Hybrid: Titleist 816 H1 (17 degrees)
Shaft: Fujikura Motore Speeder VC 9.2 X

Irons: Titleist T200 (3, 4), Titleist T100 (5-9)
Shafts: Project X 6.5

Wedges: Titleist Vokey SM8 (46-10F @55), Titleist Vokey SM10 (54-10S @53), Titleist Vokey SM4 (60 @59)
Shafts: True Temper Dynamic Gold X100 w/Sensicore

Putter: Odyssey White Hot No. 2

Ball: Titleist Pro V1x

Grips: Golf Pride Tour Velvet Grip Rite

Check out more in-hand photos of Steve Stricker’s clubs here.

Your Reaction?
  • 3
  • LEGIT0
  • WOW0
  • LOL0
  • IDHT1
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

Whats in the Bag

Alex Fitzpatrick WITB 2024 (April)

Published

on

  • Alex Fitzpatrick what’s in the bag accurate as of the Zurich Classic. 

Driver: Ping G430 LST (10.5 degrees)
Shaft: Fujikura Ventus Black 6 X

3-wood: TaylorMade Qi10 (15 degrees)
Shaft: Fujikura Ventus TR Black 7 X

Hybrid: Ping G430 (19 degrees)
Shaft: Fujikura Ventus Black HB 10 TX

Irons: Ping iCrossover (2), Titleist T100 (4-PW)
Shafts: Fujikura Ventus Black HB 9 TX (2), Nippon N.S. Pro Modus 3 Tour 120 X (4-9)

Wedges: Titleist Vokey Design SM10 (50-12F, 56-12D, 60-08M)
Shafts: Nippon N.S. Pro Modus 3 Tour 120 X

Putter: Bettinardi SS16 Dass

Grips: Golf Pride MCC

Check out more in-hand photos of Alex Fitzpatrick’s clubs here.

Your Reaction?
  • 2
  • LEGIT0
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

Equipment

What’s the perfect mini-driver/shaft combo? – GolfWRXers discuss

Published

on

In our forums, our members have been discussing Mini-Drivers and accompanying shafts. WRXer ‘JamesFisher1990’ is about to purchase a BRNR Mini and is torn on what shaft weight to use, and our members have been sharing their thoughts and set ups in our forum.

Here are a few posts from the thread, but make sure to check out the entire discussion and have your say at the link below.

  • PARETO: “New BRNR at 13.5. Took it over to TXG (Club Champ but TXG will always rule) in Calgary for a fit. Took the head down to 12, stuck in a Graphite Design AD at 3 wood length and 60g. Presto- numbers that rivaled my G430Max but with waaaaay tighter dispersion. Win.”
  • driveandputtmachine: “Still playing a MIni 300.  The head was only 208, so I ordered a heavier weight and play it at 3 wood length.  I am playing a Ventus Red 70.   I play 70 grams in my fairways.  I use it mainly to hit draws off the tee.  When I combine me, a driver, and trying to hit a draw it does not work out well most of the time.  So the MIni is for that. As an aside, I have not hit the newest BRNR, but the previous model wasn’t great off the deck.  The 300 Mini is very good off the deck.”
  • JAM01: “Ok, just put the BRNR in the bag along side a QI10 max and a QI10 3 wood. A load of top end redundancy. But, I have several holes at my two home courses where the flight and accuracy of the mini driver helps immensely. Mine is stock Proforce 65 at 13.5, I could see a heavier shaft, but to normal flex, as a nice alternative.”

Entire Thread: “What’s the perfect Mini-Driver/Shaft combo? – GolfWRXers discuss”

Your Reaction?
  • 3
  • LEGIT1
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK4

Continue Reading

WITB

Facebook

Trending