Connect with us

Equipment

Cobra King F6+ driver: The best the industry has to offer?

Published

on

Is the “best” driver the one that offers the most drastic adjustability? If so, Cobra’s new King F6+ may have a case as the industry leader, according to claims from the company.

The current obsession with adjustability in driver design is a puzzle for equipment engineers. How do they lower center of gravity to make the ball launch higher with less spin and raise moment of inertia to increase forgiveness… while simultaneously adding more and more adjustable features? According to Tom Olsavsky, vice president of R&D at Cobra, the company’s new King F6+ and King F6+ Pro drivers ($399) take an industry-leading step in the right direction. The trick? Carbon fiber.

CarbonTrac

Thanks to an 18-gram sliding weight housed in a carbon-fiber track (Cobra calls it a CarbonTrac), the F6+ offers the most drastic changes in front-to-back center of gravity (CG) adjustability — 6 millimeters front to back and 600 rpm of spin — and has the lowest CG of any adjustable driver on the market, according to Cobra.

For comparison, TaylorMade claims its M1 T-track system affects spin by 300 rpm when changing CG from front-to-back.

Related: Cobra’s King LTD driver, which boasts a “zero CG.”

CobraNew

The F6+ driver’s predecessor, the Fly-Z+, offered “FlipZone” adjustability, which let golfers move CG forward and backward. But a front setting and a back setting were the only two options. The F6+’s sliding weight track offers nine different CG options, and most importantly, Cobra was able to significantly lower CG, thus raising moment of inertia (MOI).

By building the track’s foundation out of 100 percent carbon fiber, Cobra was able reduce the weight of the structure by 8 grams compared to an all-titanium construction. The crown of the driver is also made from carbon fiber, a structure that the company says is 12 grams lighter than its titanium equivalent.

CobraSpeedChannel

The F6+’s body is made from Ti 811, a material that’s lighter and stronger than the titanium used in the Fly-Z+, saving 6 grams in total. A new Speed Channel helps save 1.5-2 grams on the club face and is 10 to 15 percent better on off-center hits, according to Cobra.

Cobra

The new Cobra F6+ drivers are available in four colors, and orange will be available for custom order, and the Turbulent/Gecko will be available on March 15.

What the F6+ driver doesn’t do, however, is allow golfers to move CG toward the heel or toe like a few other drivers in the market. Does that matter? Well, to a player who wants to tweak their draw or fade, it could be a problem.

CobraAddress

Cobra’s solution? The company’s MyFly hosel, also specially designed to save weight, allows golfers to adjust loft and lie angle with eight different positions including three draw-biased settings, which make the driver more upright. Cobra’s new F6+ comes in an F6+ Pro head, too, which is essentially the same driver with less loft. It also has fade-biased lie angle settings instead of draw settings.

The loft and lie options between the King F6+ and F6+ Pro drivers

CobraLofts

Something to keep in mind: When using the sliding weight track, you can also affect side-to-side trajectory. Sliding the weight forward will tend to make the driver more fade biased, while sliding it rearward will give the driver more draw bias.

The Cobra F6+ driver will be available at retail on Jan. 15, 2016.

Shaft offerings and pricing

CobraShafts

No-upcharge shafts

ShaftOptionsCobra

Cobra also offers a slew of premium shafts available for an upcharge, including:

  • Aldila Rogue Silver and Black
  • Fujikura Pro, Speeder Pro, Speeder Pro Tour Spec, Speeder Evolution
  • Graphite Design Tour AD-MT, Tour AD-BB, Tour AD-DI, Tour AD-MJ, YS Reloaded
  • Mitsubishi Rayon Diamana S+, D+, B-Series, W-Series, Kuro Kage Black TiNi
  • Oban Isawa, Kiyoshi Gold

[wrx_retail_links productid=”53″]

Related

Your Reaction?
  • 292
  • LEGIT32
  • WOW28
  • LOL5
  • IDHT7
  • FLOP8
  • OB2
  • SHANK43

He played on the Hawaii Pacific University Men's Golf team and earned a Masters degree in Communications. He also played college golf at Rutgers University, where he graduated with a Bachelor of Arts in Journalism.

24 Comments

24 Comments

  1. Stevie D.

    Mar 21, 2017 at 10:28 pm

    As someone who has gamed TM drivers since the 80’s, I wanted to offer my recent experience. I went to a demo day in Orlando a few months ago, and tried drivers from all the top manufacturers. As a golfer who tend to come in steep on the ball, having lots adjustability in the driver was very important. The F6+ and Mizuno JPX 900 w/speeder661, were the longest, but the consistency favored the Cobra. I bought the F6+ w/matrix black tie, at half the price of the JPX900, and have been driving the ball longer, straighter and with more consistency finding the fairway. I settled on the weight all the way forward and the loft set to 10.5° draw setting. I couldn’t be happier. Next up will be replacing my TM 3 wood and rescue with the Cobra F7 rail.

  2. Anthony

    Feb 18, 2016 at 1:49 pm

    F6+ sliding weight design is horrible. The weight should be squared off so it can’t rotate while you are tightening. The screw head snapped off on mine while I was tightening it. Great head with great numbers but a horrible design on the sliding weight.

    • Golf93454

      Sep 17, 2016 at 2:02 pm

      Anthony: so true. Had to ship my driver back to Cobra (thanks Roger Dunn). Third time to move the sliding wt and it stripped? Couldn’t be tightened. And yes it moves while you are trying to tighten it. Ended up sticking with my Mizuno JPX-850

  3. Osterhoff39

    Nov 22, 2015 at 6:31 pm

    I recently demoed this F6+ and I have hit the king Ltd also. I own the fly z and the m1 and the F6+ is an AMAZING driver!! First off I’m a 8 handicap right now with an average 100 mph swing speed. I like to hit a mid/high trajectory with a slight draw and my fly z gives me that with a 260 yard average drive. This F6 straight out of the bag I was hitting the ball 250 with a 14 mph head wind. I made a few adjustments and was getting over 20 yards further then with my fly z and the M1!! So I took out the king Ltd to compare and the F6+ won by only a few yards. Like I said I’m not a pro and don’t have the swing speed of one either, but these cobra drivers are just AWESOME!!

  4. I'm Ron Burgundy??

    Nov 21, 2015 at 11:30 pm

    I play the Fly Z+ woods and they are legit! Really feels like the ball explodes off the face. I am interested in trying these. Not sure if they will offer any gains for me over the Fly Z+ but we will see!

  5. retiredRichard

    Nov 18, 2015 at 2:15 pm

    So I wait till 11/13 to see/hit the King LTD and now I have to wait till 1/15/16 for the F6? They keep this up and I may save a lot of bucks ’cause I will just keep waiting for the next great one.

  6. LaBraeGolfer

    Nov 17, 2015 at 11:06 pm

    Did I miss something usually I’m great with understanding equipment, but kinda confused on the whole F6+ vs. King LTD thing this year, I kinda feel like their is two options you could go for based on what you want in a driver since their is 4 models total. I don’t know if I’m confused the average golfer is definitely going to be.

    • ltd

      Nov 18, 2015 at 3:09 am

      They’ll also have the LTD XL, the bonded, non-adjustable, lightweight shaft with off-set hosel look version for the slow swing speed people. So that’ll be 5 different heads in one sitting

      • Casey

        Jan 10, 2016 at 10:46 am

        They really have 3 different heads this year. The LTD and LTD Pro are the same head, but the Pro has less loft and it’s lie angle is more flat. Same thing for the King F6+ and King F6+ Pro. Then they have the F6.

  7. Mat

    Nov 17, 2015 at 9:39 pm

    In just about two years, Cobra has gone from trendy buy-for-color to any serious player could bag and no one questions it. Very impressive Puma.

  8. Desmond

    Nov 17, 2015 at 9:32 pm

    Gosh, the Elements Chrome and + as a no upcharge … that’s worth $$$

  9. T2C

    Nov 17, 2015 at 7:32 pm

    Hey Hammer, what color does Mercer wear?

  10. other paul

    Nov 17, 2015 at 7:29 pm

    Sexy looking driver.

  11. Desmond

    Nov 17, 2015 at 6:32 pm

    It’s another take on adjustability. For me, I like the Callaway GBB because I can slide the perimeter weighting to fade to account for my normal miss – a toe hit. Put the weight to fade, hit it towards toe and the weight expands the sweetspot towards the toe, giving me a gentle draw or straight ball flight when coupled with a “D” hosel setting.

    The point is all of this tech is great. Choose the tech that works for you.

  12. john

    Nov 17, 2015 at 5:35 pm

    add another $10 to the price to get rid of that antique grip lol

  13. Poppa

    Nov 17, 2015 at 2:25 pm

    240 upcharge for Aldila Rogue shaft and it’s not even 125 MSI one. SHANK

    • WILSON!!

      Nov 17, 2015 at 8:36 pm

      Someone sure is picky. The rogue isn’t even a great shaft… this comment is a shank!

      • David Ober

        Nov 17, 2015 at 10:52 pm

        The Rogue may not be for everyone, but combined with the GBB Alpha DBD, it’s about as point-and-shoot perfect as any shaft/driver combo I’ve hit in the last fifteen years….

      • ph00ny

        Nov 18, 2015 at 12:19 pm

        I’m liking Rogue Silver 70x on my E8 Beta 3 wood and as soon as my M1 arrives, i’m sure i will enjoy it as well.

    • Bob

      Nov 20, 2015 at 7:34 pm

      Chrome Elements + for no upcharge, you can’t be mad about shaft choices.

  14. Fozcycle

    Nov 17, 2015 at 11:56 am

    I like the look of the F6……and it comes in Blue, of course! Go Kentucky!

    • Hammer

      Nov 17, 2015 at 12:46 pm

      That’s definitely Duke blue!

      • KUrob77

        Nov 17, 2015 at 7:15 pm

        Definitely Kansas blue. More appealing at address

        • Chris Loskie

          Nov 18, 2015 at 11:21 pm

          Its duke blue until someone else is the champ!!! ????

Leave a Reply

Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Equipment

What’s the perfect Mini-Driver/Shaft combo? – GolfWRXers discuss

Published

on

In our forums, our members have been discussing Mini-Drivers and accompanying shafts. WRXer ‘JamesFisher1990’ is about to purchase a BRNR Mini and is torn on what shaft weight to use, and our members have been sharing their thoughts and set ups in our forum.

Here are a few posts from the thread, but make sure to check out the entire discussion and have your say at the link below.

  • PARETO: “New BRNR at 13.5. Took it over to TXG (Club Champ but TXG will always rule) in Calgary for a fit. Took the head down to 12, stuck in a Graphite Design AD at 3 wood length and 60g. Presto- numbers that rivaled my G430Max but with waaaaay tighter dispersion. Win.”
  • driveandputtmachine: “Still playing a MIni 300.  The head was only 208, so I ordered a heavier weight and play it at 3 wood length.  I am playing a Ventus Red 70.   I play 70 grams in my fairways.  I use it mainly to hit draws off the tee.  When I combine me, a driver, and trying to hit a draw it does not work out well most of the time.  So the MIni is for that. As an aside, I have not hit the newest BRNR, but the previous model wasn’t great off the deck.  The 300 Mini is very good off the deck.”
  • JAM01: “Ok, just put the BRNR in the bag along side a QI10 max and a QI10 3 wood. A load of top end redundancy. But, I have several holes at my two home courses where the flight and accuracy of the mini driver helps immensely. Mine is stock Proforce 65 at 13.5, I could see a heavier shaft, but to normal flex, as a nice alternative.”

Entire Thread: “What’s the perfect Mini-Driver/Shaft combo? – GolfWRXers discuss”

Your Reaction?
  • 0
  • LEGIT0
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

Equipment

Coolest thing for sale in the GolfWRX Classifieds (4/26/24): Artisan 0521 custom putter

Published

on

At GolfWRX, we are a community of like-minded individuals that all experience and express our enjoyment of the game in many ways.

It’s that sense of community that drives day-to-day interactions in the forums on topics that range from best driver to what marker you use to mark your ball. It even allows us to share another thing we all love – buying and selling equipment.

Currently, in our GolfWRX buy/sell/trade (BST) forum, there is a listing for an Artisan 0521 custom putter

From the seller: (@Nobody2): “$775 -Artisan 0521 custom putter PVD (black finish) with sweep neck hosel.  There are no personal stampings other than my player # in very small print on the side of the hosel (all Artisan products have this along with the date it was made). This putter looks absolutely amazing and has only been used for 3 rounds. It has a black steel shaft and has a very Cam Smith look to it.  The putter looks new and has no wear marks anywhere on the putter.  It comes with extra weights (one set of of 5 gram weights and one set of 15 gram weights). The head cover is a a navy blue ‘quilted blade putter cover.’  If you are wondering why I am selling…I flat out have the yips and the only thing saving me is a broomstick.  New, this putter is $1085, so if the specs work for you (grip, length and lie can certainly be tweaked) it will save you some good money and 2 month wait time.

Specs:

Loft               2.75  degrees
Lie                  69  degrees
Length           35.25″
offset             .300 slightly less than full shaft offset
head weight     350 grams
Toe Hang          20 degrees
Grip                   Ionic Classic Pistol”

To check out the full listing in our BST forum, head through the link: Artisan 0521 custom putter

This is the most impressive current listing from the GolfWRX BST, and if you are curious about the rules to participate in the BST Forum you can check them out here: GolfWRX BST Rules

Your Reaction?
  • 1
  • LEGIT0
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

Equipment

A shocking Backstryke putter appearance + 7 interesting gear photos from the Zurich Classic

Published

on

Welcome to New Orleans, where TPC Louisiana plays host to the 2024 Zurich Classic. In between breakfast beignets and nightly Creole feasts, PGA Tour players are also competing in the unique two-man format at the Zurich this week.

Although the vibes in Nawlins are a bit lighter-fare than the recent back-to-back competitions the Masters and the RBC Heritage signature event), the gear news was no less serious this week.

We spotted some recent changes from Rory McIlroy, a very rare Odyssey Backstryke putter, dove into the bag of legendary New Orleans Saints quarterback Drew Brees, and spotted Patrick Cantlay continuing to test new equipment.

Get your beads out and crack your crawfish, because it’s time for an equipment rundown from The Big Easy (meaning New Orleans, of course, not Ernie Els).

See all of our photos from the Zurich Classic here

Rory’s on-and-off lob wedge

Since the end of 2023, Rory McIlroy has had an on-again, off-again relationship with a Titleist Vokey K-Grind lob wedge. In his last start, it was on, and the wedge is back in the bag again this week. We got a great look at the complicated grind that McIlroy uses.

 

View this post on Instagram

 

A post shared by GolfWRX (@golfwrx)

A full look into McIlroy’s bag above also shows that he switched out of the TaylorMade BRNR Mini Copper that he used at the RBC Heritage, and he’s back into the Qi10 core 3-wood. As we discussed last week, McIlroy will likely keep the BRNR around as a course-specific club, trading it in and out for the 3-wood.

See Rory McIlroy’s full 2024 WITB from the Zurich here

Turning Back the clock

Unless Tommy Gainey is in the field, it’s unlikely you’ll ever see Odyssey’s Backstryke technology make an appearance on the PGA Tour.

But then, when you least expect it, Russ Cochran shows up.

For more than a decade – since the 2013 Sony Open in Hawai’i – Cochran has been stuck on 599 PGA Tour starts. This week will be his 600th.

Cochran is in the field at the Zurich this week playing alongside Eric Cole, whose regular caddie is Reed Cochran, Russ’s son.

The Backstryke putter was first released back in 2010, and its unique design helps shift the axis point of the putter closer to the CG of the head. And, the putter is getting a nod this week at the Zurich Classic, thanks to Cochran’s 600th career PGA Tour start.

The putter is certainly awesome, but don’t forget to check out Cochran’s full WITB from this week.

Drew Brees with a Super Bowl winning Scotty Cameron putter

Drew Brees, a legendary retired quarterback for the hometown New Orleans Saints, made an appearance at the Zurich’s Wednesday Pro-Am, playing alongside Zach Johnson, Ryan Palmer, and current Saints QB Derek Carr.

Brees’ bag included a TaylorMade Stealth2 Plus driver, a BRNR Mini 13.5-degree, a Stealth 5-wood, a mixed set of P-790 and P-760 irons, Milled Grind Hi-Toe wedges, and a custom Scotty Cameron “New Orleans Saints” putter, which Scotty made for Brees following his Super Bowl MVP-winning performance in 2010.

 

View this post on Instagram

 

A post shared by GolfWRX (@golfwrx)

It should also be noted that Brees has his Venmo QR code as a bag tag.

If you’re gambling with Brees on the course, just know that not having cash won’t work as an excuse.

Brilliant.

See Drew Brees’ full WITB from the Zurich here

Stricker’s unrecognizable putter

Steve Stricker has made numerous upgrades to his bag recently, including a new TSR3 driver and T100 irons, but his longtime Odyssey White Hot No. 2 putter is still going strong. It’s the most recognizable unrecognizable putter ever.

Here’s a better look at Stricker’s flatstick, which he started using back in 2007.

 

View this post on Instagram

 

A post shared by GolfWRX (@golfwrx)

Patrick Cantlay has opened the equipment-switching floodgates

Over on the PGA Tour’s Equipment Report this week, we covered Cantlay’s recent switch into Ping Blueprint S irons, and a Titleist TSR2 driver.

Cantlay hadn’t switched irons for about seven years, so the iron switch he made at The 2024 Masters came as a shock to the norm. He simply isn’t one to change gear very often, so anytime Cantlay makes a switch, it’s news.

It seems the floodgates of equipment testing have opened up a bit for Cantlay, who was also spotted testing a custom Scotty Cameron blade putter on Tuesday this week. By Wednesday, Cantlay was back practicing with his familiar Scotty Cameron T5 Proto mallet, but it’s certainly something to keep an eye on going forward.

Daniel Berger’s custom Jailbird site lines

Berger, who’s currently using Odyssey’s Ai-One Mini Jailbird mallet putter, has a unique 3-dot, 2-line alignment on the crown of his navy-white-navy-white mallet putter. Looking down at the putter, it’s easy to see why this alignment system would help; it just seems impossible to set up to the ball off-center, or misaligned to the target.

Also, for anyone worried, you can rest easy. Yes, he’s still playing the 2013 TaylorMade TP MC irons, which we highlighted in our recent “Modern Classics: Old vs. New” video testing series.

FitzMagic teams back up

Brothers Matthew and Alex Fitzpatrick are teaming up once again at the Zurich this year, and Bettinardi Golf hooked them up with some festive “FitzMagic” headcovers to match this week.

See what else is in Alex Fitzpatrick’s WITB here

And, with that, we say goodbye to the Zurich Classic in New Orleans. Don’t forget to check out all of our photos from this week, including 30 unique photo galleries full of equipment photos.

We’ll see you next week in Texas for the 2024 CJ Cup Byron Nelson!

Your Reaction?
  • 8
  • LEGIT0
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

WITB

Facebook

Trending