Equipment

Callaway Tour Authentic RAZR Fit Adjustable Driver

Published

14 years ago

May 14, 2012

GolfWRX

This latest version of the award-winning RAZR Fit features an even greater level of adjustability in the hosel and additional movable weight offerings to dial in the center of gravity and ball flight characteristics, all with a sleek black PVD finish and striking green accents on the sole of the club head.

“The standard offering of our RAZR Fit driver brings straightforward adjustability to golfers who want to see noticeable changes in their ball flight by making simple changes to their driver set-up,” said Alan Hocknell, Senior Vice President, Research & Development, Callaway Golf. “Now, with the release of this Tour Authentic version of the RAZR Fit, golfers who are looking for more detailed ball flight optimization can make smaller, incremental changes to their driver configuration and will have access to the same detailed adjustability options that tour professionals work with.”

Click here to see more photos and read the discussion in the forums

The RAZR Fit driver, which was named Editor’s Choice on the Golf Digest Hot List and launched at retail with great success on February 17, features a straightforward adjustable “cog” that allows golfers to alter the face angle to three address positions: Open, Square and Closed. The new Tour Authentic version of the RAZR Fit driver takes that adjustability to another level, with an OptiFit Tour Hosel that features three sub-positions within the Square, Open, and Closed settings, totaling nine unique face angles to choose from. The OptiFit Tour Hosel is the same one used in the drivers of tour professionals like Phil Mickelson, Ernie Els and many others.

While the standard RAZR Fit driver comes with 12-gram and 2-gram OptiFit weights that can be moved from the heel and toe positions to promote a neutral or draw weighting, the Tour Authentic RAZR Fit driver offers a greater variety of OptiFit Tour Weights (2, 4, 6, 8, 10 and 12 grams), allowing golfers to shift the club head’s center of gravity to more finely tune ball flight and trajectory. A further benefit of the OptiFit Tour Weights is the ability to additionally optimize the total weight and swing weight of the driver. Separate kits containing 4, 6, 8 and 10 gram weights are now available for purchase separately for golfers that already own the standard RAZR Fit driver, but would like more moveable weight options.

“By adding a second cog to the hosel and additional OptiFit Tour Weights, the Tour Authentic RAZR Fit driver will allow golfers the opportunity to dial in their desired ball flight and trajectory to the most precise level,” Hocknell said. “With this enhanced versatility, the Tour Authentic RAZR Fit delivers on our goal of offering meaningful adjustability to better players in an easy-to-understand design.”

Click here to see more photos and read the discussion in the forums

The club head of the Tour Authentic RAZR Fit driver features a black Physical Vapor Deposition (PVD) Finish with green accents that match the Golf Pride New Decade grip and premium, magnetized head cover. The club comes with a Project X Black shaft-a Tour-level offering that delivers explosive power and optimized trajectory for maximum carry and roll.

The crown of the RAZR Fit and Tour Authentic RAZR Fit drivers is comprised of Forged Composite, an advanced carbon composite material that Callaway developed over several years in partnership with Automobili Lamborghini. Lighter, stronger, more precise than titanium (the material used in more than 90% of the current drivers in the market), Forged Composite allows Callaway engineers to save crucial weight and precisely control the thickness of the crown. These benefits give the drivers a lower center of gravity, lowering backspin to optimize distance.

Callaway’s RAZR Fit and Tour Authentic RAZR Fit drivers also incorporate a proprietary innovation in aerodynamic shaping called Streamlined Surface Technology that addresses the complex variations in aerodynamic flow during a driver’s entire downswing-from transition through impact. More than four years in the making, Streamlined Surface Technology has reduced RAZR Fit’s energy loss due to drag by 14% (relative to its predecessor, the RAZR Hawk Driver), despite the addition of an adjustable hosel. This contributes to increased ball speed at impact, a critical element of driving distance. This aerodynamics technology is accompanied by the debut of the Company’s new Speed Frame Face Technology, which combines hyperbolic shaping of the clubface with precision thickness control to achieve a larger sweet spot. This new technology optimizes stress distribution and increases ball speeds across the face. Callaway engineers were also able to save weight by implementing this new face technology.

The Tour Authentic RAZR Fit driver will be available for all golfers for the new product introduction retail price of $499 (US).

Click here to see more photos and read the discussion in the forums

Equipment

Then and now: Comparing Rory McIlroy’s current setup to his record-breaking 2019 Canadian Open victory

Published

2 hours ago

Jun 11, 2026

Alistair Cameron

In Rory McIlroy’s first appearance at the 2019 RBC Canadian Open, he crushed the record books to earn his 16th PGA Tour title in dominating fashion, winning by seven shots over Shane Lowry and Webb Simpson.

McIlroy’s score of 22-under-par 258 is the lowest 72-hole score to date at the Canadian Open, and his closing 61 is also the best final-round score in the history of one of golf’s oldest tournaments. Finally, with his win in 2019, McIlroy became only the sixth player to win the career Triple Crown, adding to his victories at the U.S. Open in 2011 and The Open Championship in 2014, joining Tommy Armour, Walter Hagen, Arnold Palmer, Lee Trevino and Tiger Woods in a coveted list.

So, with that, why not compare his current setup to the clubs he used to break all the records?

Driver

2019: TaylorMade M5 (9 degrees), Shaft: Mitsubishi Tensei CK Pro White 70 TX
2026: TaylorMade Qi4D (9 degrees @8), Shaft: Fujikura Ventus Black 7X (45 5/8 inches)

McIroy led the Tour in Strokes Gained: Off-the-Tee in 2019; he’s doing the same in 2026. Between now and then, McIlroy has switched from the Mitsubishi Tensei CK Pro White 70 TX (a shaft with slightly more feeling in the tip) to the original Fujikura Ventus Black 7X, having just made the change to the heavier version from playing the 60X.

What’s interesting about McIlroy’s 2019 setup is that the weighting on his driver is actually set in the high-draw setting, using the T-Track weighting system, whereas in the Qi4D, he’s currently using a heavily rear-weighted setup. (Two 13-gram weights in the rear and only two 4-gram front weights.)

The TaylorMade M5 driver he played in during his Canadian Open win was the company’s first head that they claimed to design to initially exceed the USGA’s COR limit, and then injected with tuning resin to bring it back in bounds.

Fairway woods

2019: TaylorMade M6 3-wood (15 degrees), Shaft: Mitsubishi Tensei CK Pro White 80 TX; TaylorMade M5 5-wood (19 degrees), Shaft: Mitsubishi Tensei CK Pro White 90 TX
2026: TaylorMade Qi4D 3-wood (15 degrees), Shaft: Fujikura Ventus Black 8X; TaylorMade Qi4D 5-wood (18 degrees), Shaft: Fujikura Ventus Black 9X

The TaylorMade M6 fairway wood that McIlroy was using during the 2019 season is still in the bag of some of the best golfers on Tour in 2026. Just check out Justin Rose’s winning setup from the Farmers Insurance Open earlier this year. This year, though, McIlroy has still been searching for his top-end-of-the-bag setup, having played both the new Qi4D and the Qi10, which he won the Masters with.

The same shaft swap can be seen in the fairway woods as the driver, along with slightly less loft on the 5-wood.

Irons

2019: TaylorMade P750 (4) Buy here, TaylorMade P730 (5-9), Shafts: Project X 7.0
2026: TaylorMade P760 (4), TaylorMade Rors Proto (5-9), Shafts: Project X 7.0

The biggest difference between McIlroy’s custom set and the stock P730s is the groove design. While the P730s were constructed with 14 MX-9 grooves on their milled faces, McIlroy’s proto heads instead use the higher-spinning, 16-groove layout of the TW2 grooves. Other big differences between the sets are that McIlroy’s 7- and 8-irons have thinner toplines, are 1 degree stronger in loft, and are 1/4 inch longer than the original P730 builds.

With McIlroy’s 4-iron, the switch from P750 to P760 sees a transition to a two-piece construction with Speed Foam in it, which allows McIlroy to launch the ball slightly higher, with more workability.

Wedges

2019: TaylorMade Milled Grind (48-09SB), TaylorMade MG Hi-Toe (52-09SB, 56-09SB, 60-LB09), Shafts: Project X Rifle 6.5
2026: TaylorMade MG5 (46-09SB, 50-09SB, 54-11SB, 60-08LB @61), Shafts: Project X 6.5 (46-54), Project X 6.5 Wedge (60)

Between 2019 and 2026, McIlroy’s focus on his short game has been much more apparent. It was the reason why he switched back to the TP5 golf ball, to help with launch, spin and control with his wedges leading up to his career Grand Slam victory in 2025. The most apparent changes to McIlroy’s wedge setup are his lofts and bounce. He’s slowly delofted his pitching to a sand wedge, but has increased the loft on the lob wedge, bending his current 60-degree to 61. With that, adding more loft to his lob wedge also slightly increases the bounce and leading-edge sit point, so, as a result, he plays a lower-bounce lob wedge compared to 2019. The MG5 wedges are also softer than the first Milled Grind option from 2019. McIlroy also no longer plays the full-face grooves found on the Hi-Toe.

Putter

2019: TaylorMade Spider X
2026: TaylorMade Spider Tour X

Notice anything similar. Yes, the copper finish on Rory McIlroy’s Spider X putter in 2019 is a slightly more reflective finish than the recently released torched PVD finish. McIlroy was using the True Path alignment system, but now uses only a single white sightline.

Ball

2019: 2019 TaylorMade TP5 (#22)
2026: 2025 TaylorMade TP5 (RORS)

As mentioned above, McIlroy had transitioned from the TP5 to TP5x golf ball since his victory in Canada in 2019, but now is black with the same style of golf ball as his victory at Hamilton Golf & Country Club.

Grips

2019: Golf Pride Tour Velvet Cord
2026: Golf Pride MCC

Interesting, McIlroy actually used Golf Pride’s Tour Velvet Cord grips during his victory in 2019 (it was during a 2+ year switch to the corded TV) as opposed to his usual MCC grips, which he has played for most of his career.

Equipment

From the GolfWRX Classifieds: Titleist Vokey Proto Wedges 54M, 60T

Published

5 hours ago

Jun 11, 2026

Will Schube

At GolfWRX, we are a community of like-minded individuals who all experience and express our enjoyment of the game in many ways.

It’s that sense of community that drives day-to-day interactions in the forums on topics that range from best driver to what marker you use to mark your ball. It even allows us to share another thing we all love – buying and selling equipment.

Currently, in our GolfWRX buy/sell/trade (BST) forum, @Putt4Dough is selling some prototype wedges from Vokey Wedgeworks. These include a 54 degree wedge with the M grind and a 60 degree wedge with a T grind.

From the listing:

(1) Titleist Vokey Proto Wedge 54M with a Tour Issue DGS400 shaft and Golf Pride Tour Velvet (logo down). Standard length, lie, and loft. BB&F ferrule. Raw wedge in good condition. No initials. Price is $200 shipped. Buy both wedges for $380 shipped.

(2) Titleist Vokey Proto Wedge 60T with a KBS Tour 130X shaft and Golf Pride Tour Velvet. Standard length, lie, and loft. Raw wedge in good condition. No initials. Price is $200 shipped. Buy both wedges for $380 shipped.

To check out the full listing in our BST forum, head through the link. If you are curious about the rules to participate in the BST Forum, you can learn more here: GolfWRX BST Rules.