Equipment

Aldila ‘Tour Blue’ and ‘Tour Green’ shafts

Published

11 years ago

Jun 12, 2013

When designing its newest line of shafts, the “Tour Blue” and “Tour Green,” Aldila sought inspiration from its most successful platform, the NV shafts it released to tour players more than 10 years ago.

The NV shafts were made using the company’s Mico Laminate Technology, which means that extremely thin, high-quality layers of graphite were stacked on top of each other to make a shaft that felt smooth and performed more consistently.

A lot has changed in the golf industry in 10 years, but one thing that hasn’t changed is golfer’s appreciation of consistent, smooth-feeling shafts.

For all the technology that went into the new shafts, their design differences are simple. The Tour Green shafts have a stiffer tip section, which creates the low-launch, low-spin conditions that tend to work well with today’s drivers. The Tour Blue shafts have a softer tip section that launches the ball higher and with more spin, making them a good fit for fairway woods.

So what has made the Tour Blue and Tour Green two of the most popular shaft models on tour in 2013? According to John Oldenburg, vice president of engineering for Aldila, it’s the same reason that the NV shafts were so popular on tour — high-quality materials that create smooth feel and consistency.

Oldenburg said the Tour Blue and Tour Green shafts are the most consistent shafts his company has ever produced. They use what he said are the thinnest materials available, graphite fibers that are between three one-thousandths and five one-thousandths of an inch thick, which makes them better in two ways:

Because graphite shafts are built in layers, their manufacturing always results in a bit of overlap (often referred to as a shaft’s seams). Using thinner materials allows the seams to stay thin. When those seams are balanced throughout the shaft, as Aldila does with its Micro Laminate Technology, it results in a shaft that has more consistent wall thicknesses.
Since the graphite fibers are thinner, they also need less resin, or glue, to be held together. According to Oldenburg, resin is the weak link of graphite shaft design, because it is much more flexible than the graphite fibers it holds together. With less resin, Aldila can make shafts that are lighter, stiffer and lower in torque.

Aldila engineers also made the Tour Blue and Tour Green shafts with a balance point that is closer to the handle than its NV shafts, which helps balance out the heavier weight of today’s driver heads. It also allows golfers to play the longer-length shafts that have become more common in the industry, yet still keep the swing weight of the club in the D2-to-D5 range that most golfers are comfortable with.

“Before adjustable drivers … features that added weight to the head … drivers used to weigh between 198 and 202 grams, and measure between 44.5 and 45 inches long,” Oldenburg said. “Now they’re between 206 and 2012 grams, are are 45 to 46 inches long.”

The last, and maybe most important finishing thing for the sales of the Tour Blue and Tour Green shafts are the color-coded circuitboard graphics near the handle, which Oldenburg said he hopes communicate to consumers the high-tech materials and construction used to make the shafts.

“Technology stories like Micro Laminate are hard to tell,” Oldenburg said. “This is a very high-tech product, but unfortunately it still looks like a stick and it has to by the rules of golf. With the circuitboard look we’re saying, ‘Hey, there is technology in this.'”

The Tour Blue and Tour Green shafts will be released on Sept. 15 and carry an MSRP of $349. Aldila will initially release both models in a 65-gram version in R, S, X and TX flexes. In January, Aldila plans to release the 75- and 85-gram versions of the shafts.

Your Reaction?

LIKE4
LEGIT0
WOW0
LOL0
IDHT0
FLOP0
OB0
SHANK1

Related Topics:Aldila shafts

Up Next

McIlroy switches to prototype MRC driver shaft

Don't Miss

Last Minute Father’s Day Gift Guide

Zak Kozuchowski

9 Comments

chris crawford

Jul 17, 2013 at 9:48 am

i used to have a adila 70x protopype but there hard to pick up these days with it being made in 2005, will the tour green play similar to the protopype?

Reply Report comment
Pernell Stoney

Jun 20, 2013 at 1:54 am

I am looking for 5.5 rifle shafts ( project x)

Reply Report comment
Joe Golfer

Jun 15, 2013 at 1:37 am

I wonder what it actually costs Aldila to make these shafts.
One used to be able to purchase a high end shaft at a reasonable price.
They talk about the original Aldila NV green shaft. I recall that shaft starting out at around $88. After about a year, the price had dropped to around $54 after newer models (not necessarily better) had entered the Aldila group.
The UST ProForce (gold and purple) shaft was super popular for years, and it sold for around $34.
The Grafalloy Prolite was the most popular shaft for several years, and it sold for $45.
So what exactly makes these cost $350, other than that other companies are charging that much for some of theirs?
Wonder how long it will be before we see a similar looking shaft in OEM drivers, but the shaft will say “designed exclusively for (insert name of company making driver)” rather than it actually being the “real deal” shaft.

Reply Report comment
- Lyle
  
  Jun 18, 2013 at 9:29 pm
  
  You are so right. The specs may even be the same so what exactly is the reason the price has gone crazy? In some cases, OEM’s have the EXACT shaft in their stock equipment and you can buy an entire club for the same cost as the shaft. This has nearly totally eliminated reshafts. When they stop making some of those more reasonably priced shafts, we’ll just throw away a driver with a broken shaft. It will be silly to repair it when you can just buy a newer version.
  
  Reply Report comment
DenverB

Jun 14, 2013 at 12:23 pm

Sad to hear they are designed to swingweight properly in 45-46 inch drivers. That is the standard now?

Look at the guys on tour, they are almost all between 44 and 45 inches.

Reply Report comment
- Brian
  
  Jun 14, 2013 at 12:32 pm
  
  While they’re deesigned to play in longer lengths, like all shafts they can be cut down to play shorter – you just need to add weight to the head to get the swingweight you desire. This can be done in many ways – shaft insert weights, adjustable / removable weights, or hot melt in the head. I’ve done all 3 – but usually not all on the same club!
  
  Reply Report comment
  - naflack
    
    Jun 14, 2013 at 1:52 pm
    
    I have no interest in making the head even heavier and/or messing with the club heads center of gravity. If i’m dropping this kind of dough I think slapping tape in various areas should not be necessary.
    
    Reply Report comment
keith

Jun 14, 2013 at 12:47 am

Yeah, I was really hoping this would be like a $150 type of shaft. 3.5 bills is just way to much for a shaft IMO…Looks sweet though,kudos to Aldila.

Reply Report comment
J

Jun 12, 2013 at 10:15 pm

And they join the 300$ shaft prices..

Good for them… Bad for the public

Reply Report comment

Cancel reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Equipment

A shocking Backstryke putter appearance + 7 interesting gear photos from the Zurich Classic

Published

17 hours ago

Apr 25, 2024

Andrew Tursky

Welcome to New Orleans, where TPC Louisiana plays host to the 2024 Zurich Classic. In between breakfast beignets and nightly Creole feasts, PGA Tour players are also competing in the unique two-man format at the Zurich this week.

Although the vibes in Nawlins are a bit lighter-fare than the recent back-to-back competitions the Masters and the RBC Heritage signature event), the gear news was no less serious this week.

We spotted some recent changes from Rory McIlroy, a very rare Odyssey Backstryke putter, dove into the bag of legendary New Orleans Saints quarterback Drew Brees, and spotted Patrick Cantlay continuing to test new equipment.

Get your beads out and crack your crawfish, because it’s time for an equipment rundown from The Big Easy (meaning New Orleans, of course, not Ernie Els).

See all of our photos from the Zurich Classic here

Rory’s on-and-off lob wedge

Since the end of 2023, Rory McIlroy has had an on-again, off-again relationship with a Titleist Vokey K-Grind lob wedge. In his last start, it was on, and the wedge is back in the bag again this week. We got a great look at the complicated grind that McIlroy uses.

View this post on Instagram

A post shared by GolfWRX (@golfwrx)

A full look into McIlroy’s bag above also shows that he switched out of the TaylorMade BRNR Mini Copper that he used at the RBC Heritage, and he’s back into the Qi10 core 3-wood. As we discussed last week, McIlroy will likely keep the BRNR around as a course-specific club, trading it in and out for the 3-wood.

See Rory McIlroy’s full 2024 WITB from the Zurich here

Turning Back the clock

Unless Tommy Gainey is in the field, it’s unlikely you’ll ever see Odyssey’s Backstryke technology make an appearance on the PGA Tour.

But then, when you least expect it, Russ Cochran shows up.

For more than a decade – since the 2013 Sony Open in Hawai’i – Cochran has been stuck on 599 PGA Tour starts. This week will be his 600th.

Cochran is in the field at the Zurich this week playing alongside Eric Cole, whose regular caddie is Reed Cochran, Russ’s son.

The Backstryke putter was first released back in 2010, and its unique design helps shift the axis point of the putter closer to the CG of the head. And, the putter is getting a nod this week at the Zurich Classic, thanks to Cochran’s 600th career PGA Tour start.

The putter is certainly awesome, but don’t forget to check out Cochran’s full WITB from this week.

Drew Brees with a Super Bowl winning Scotty Cameron putter

Drew Brees, a legendary retired quarterback for the hometown New Orleans Saints, made an appearance at the Zurich’s Wednesday Pro-Am, playing alongside Zach Johnson, Ryan Palmer, and current Saints QB Derek Carr.

Brees’ bag included a TaylorMade Stealth2 Plus driver, a BRNR Mini 13.5-degree, a Stealth 5-wood, a mixed set of P-790 and P-760 irons, Milled Grind Hi-Toe wedges, and a custom Scotty Cameron “New Orleans Saints” putter, which Scotty made for Brees following his Super Bowl MVP-winning performance in 2010.

View this post on Instagram

A post shared by GolfWRX (@golfwrx)

It should also be noted that Brees has his Venmo QR code as a bag tag.

If you’re gambling with Brees on the course, just know that not having cash won’t work as an excuse.

Brilliant.

See Drew Brees’ full WITB from the Zurich here

Stricker’s unrecognizable putter

Steve Stricker has made numerous upgrades to his bag recently, including a new TSR3 driver and T100 irons, but his longtime Odyssey White Hot No. 2 putter is still going strong. It’s the most recognizable unrecognizable putter ever.

Here’s a better look at Stricker’s flatstick, which he started using back in 2007.

View this post on Instagram

A post shared by GolfWRX (@golfwrx)

Patrick Cantlay has opened the equipment-switching floodgates

Over on the PGA Tour’s Equipment Report this week, we covered Cantlay’s recent switch into Ping Blueprint S irons, and a Titleist TSR2 driver.

Cantlay hadn’t switched irons for about seven years, so the iron switch he made at The 2024 Masters came as a shock to the norm. He simply isn’t one to change gear very often, so anytime Cantlay makes a switch, it’s news.

It seems the floodgates of equipment testing have opened up a bit for Cantlay, who was also spotted testing a custom Scotty Cameron blade putter on Tuesday this week. By Wednesday, Cantlay was back practicing with his familiar Scotty Cameron T5 Proto mallet, but it’s certainly something to keep an eye on going forward.

Daniel Berger’s custom Jailbird site lines

Berger, who’s currently using Odyssey’s Ai-One Mini Jailbird mallet putter, has a unique 3-dot, 2-line alignment on the crown of his navy-white-navy-white mallet putter. Looking down at the putter, it’s easy to see why this alignment system would help; it just seems impossible to set up to the ball off-center, or misaligned to the target.

Also, for anyone worried, you can rest easy. Yes, he’s still playing the 2013 TaylorMade TP MC irons, which we highlighted in our recent “Modern Classics: Old vs. New” video testing series.

FitzMagic teams back up

Brothers Matthew and Alex Fitzpatrick are teaming up once again at the Zurich this year, and Bettinardi Golf hooked them up with some festive “FitzMagic” headcovers to match this week.

See what else is in Alex Fitzpatrick’s WITB here

And, with that, we say goodbye to the Zurich Classic in New Orleans. Don’t forget to check out all of our photos from this week, including 30 unique photo galleries full of equipment photos.

We’ll see you next week in Texas for the 2024 CJ Cup Byron Nelson!

Your Reaction?